Methylcellulose-Directed Synthesis of Nanocrystalline Zeolite NaA with High CO₂ Uptake

Controlled Synthesis of Metal-Organic Frameworks in Scalable Open-Porous Contactor for Maximizing Carbon Capture Efficiency

Metal-organic frameworks (MOFs) are a class of microporous materials that have been highlighted with fast and selective sorption of gas molecules; however, they are at least partially unstable in the scale-up process. Here, we report a rational shaping of MOFs in a scalable architecture of fiber sorbent. The long-standing stability challenge of MOFs was resolved by using stable metal oxide precursors that are subject to controlled surface oxide dissolution-growth chemistry during the Mg-based MOF synthesis. Highly uniform MOF crystals are synthesized along with the open-porous fiber sorbents networks, showing unprecedented cyclic CO₂ capacities in both flue gas and direct air capture (DAC) conditions. The same chemistry enables an in situ flow synthesis of Mg-MOF fiber sorbents, providing a scalable pathway for MOF synthesis in an inert condition with minimal handling steps. This modular approach can serve both as a reaction stage for enhanced MOF fiber sorbent synthesis and as a "process-ready" separation device.

Enhancement of CO2 adsorption on biochar sorbent modified by metal incorporation

This work is scrutinizing the development of metallized biochar as a low-cost bio-sorbent for low temperature CO₂ capture with high adsorption capacity. Accordingly, single-step pyrolysis process was carried out in order to synthesize biochar from rambutan peel (RP) at different temperatures. The biochar product was then subjected to wet impregnation with several magnesium salts including magnesium nitrate, magnesium sulphate, magnesium chloride and magnesium acetate which then subsequently heat-treated with N₂. The impregnation of magnesium into the biochar structure improved the CO₂ capture performance in the sequence of magnesium nitrate > magnesium sulphate > magnesium chloride > magnesium acetate. There is an enhancement in CO₂ adsorption capacity of metallized biochar (76.80 mg g^-1) compare with pristine biochar (68.74 mg g^-1). It can be justified by the synergetic influences of physicochemical characteristics. Gas selectivity study verified the high affinity of biochar for CO₂ capture compared with other gases such as air, methane, and nitrogen. This investigation also revealed a stable performance of the metallized biochar in 25 cycles of CO₂ adsorption and desorption. Avrami kinetic model accurately predicted the dynamic CO₂ adsorption performance for pristine and metallized biochar.

Critical review of existing nanomaterial adsorbents to capture carbon dioxide and methane

Innovative gas capture technologies with the objective to mitigate CO₂ and CH₄ emissions are discussed in this review. Emphasis is given on the use of nanoparticles (NP) as sorbents of CO₂ and CH₄, which are the two most important global warming gases. The existing NP sorption processes must overcome certain challenges before their implementation to the industrial scale. These are: i) the utilization of the concentrated gas stream generated by the capture and gas purification technologies, ii) the reduction of the effects of impurities on the operating system, iii) the scale up of the relevant materials, and iv) the retrofitting of technologies in existing facilities. Thus, an innovative design of adsorbents could possibly address those issues. Biogas purification and CH₄ storage would become a new motivation for the development of new sorbent materials, such as nanomaterials. This review discusses the current state of the art on the use of novel nanomaterials as adsorbents for CO₂ and CH₄. The review shows that materials based on porous supports that are modified with amine or metals are currently providing the most promising results. The Fe₃O₄-graphene and the MOF-117 based NPs show the greatest CO₂ sorption capacities, due to their high thermal stability and high porosity. Conclusively, one of the main challenges would be to decrease the cost of capture and to scale-up the technologies to minimize large-scale power plant CO₂ emissions.

Pentaethylenehexamine-Loaded Hierarchically Porous Silica for CO₂ Adsorption

Recently, amine-functionalized materials as a prospective chemical sorbent for post combustion CO₂ capture have gained great interest. However, the amine grafting for the traditional MCM-41, SBA-15, pore-expanded MCM-41 or SBA-15 supports can cause the pore volume and specific surface area of sorbents to decrease, significantly affecting the CO₂ adsorption-desorption dynamics. To overcome this issue, hierarchical porous silica with interparticle macropores and long-range ordering mesopores was prepared and impregnated with pentaethylenehexamine. The pore structure and amino functional group content of the modified silicas were analyzed by scanning electron microscope, transmission electron microscope, N₂ adsorption, X-ray powder diffraction, and Fourier transform infrared spectra. Moreover, the effects of the pore structure as well as the amount of PEHA loading of the samples on the CO₂ adsorption capacity were investigated in a fixed-bed adsorption system. The CO₂ adsorption capacity reached 4.5 mmol CO₂/(g of adsorbent) for HPS−PEHA-70 at 75 °C. Further, the adsorption capacity for HPS-PEHA-70 was steady after a total of 15 adsorption-desorption cycles.