Effect of Temperature on the Growth of Silver Nanoparticles Using Plasmon-Mediated Method under the Irradiation of Green LEDs

Surface modification of nanoparticles for enhanced applicability of nanofluids in harsh reservoir conditions: A comprehensive review for improved oil recovery

Nanoparticles improve traditional Enhanced Oil Recovery (EOR) methods but face instability issues. Surface modification resolves these, making it vital to understand its impact on EOR effectiveness. This paper examines how surface-modified nanoparticles can increase oil recovery rates. We discuss post-synthesis modifications like chemical functionalization, surfactant and polymer coatings, surface etching, and oxidation, and during-synthesis modifications like core-shell formation, in-situ ligand exchange, and surface passivation. Oil displacement studies show surface-engineered nanoparticles outperform conventional EOR methods. Coatings or functionalizations alter nanoparticle size by 1-5 nm, ensuring colloidal stability for 7 to 30 days at 25 to 65 °C and 30,000 to 150,000 ppm NaCl. This stability ensures uniform distribution and enhanced penetration through low-permeability (1-10 md) rocks, improving oil recovery by 5 to 50 %. Enhanced recovery is achieved through 1-25 μm oil-in-water emulsions, increased viscosity by ≥30 %, wettability changes from 170° to <10°, and interfacial tension reductions of up to 95 %. Surface oxidation is suitable for carbon-based nanoparticles in high-permeability (≥500 md) reservoirs, leading to 80 % oil recovery in micromodel studies. Surface etching is efficient for all nanoparticle types, and combining it with chemical functionalization enhances resistance to harsh conditions (≥40,000 ppm salinity and ≥ 50 °C). Modifying nanoparticle surfaces with a silane coupling agent before using polymers and surfactants improves EOR parameters and reduces polymer thermal degradation (e.g., only 10 % viscosity decrease after 90 days). Economically, 500 ppm of nanoparticles requires 56.25 kg in a 112,500 m3 reservoir, averaging $200/kg, and 2000 ppm of surface modifiers require 4 kg at $3.39/kg. This results in 188,694.30 barrels, or $16,039,015.50 at $85 per barrel for a 20 % increase in oil recovery. The economic benefits justify the initial costs, highlighting the importance of cost-effective nanoparticles for EOR applications.

Revealing the high efficiency of fluorescence quenching of rhodamine B by triangular silver nanodisks due to the inner filter effect mechanism

Performing effective fluorescence quenching based on a metal nanomaterial is essential to construct fluorescence sensors. Silver nanomaterials are well known as an excellent candidate for an absorber in fluorescence sensing systems. Herein, we investigated the fluorescence quenching of rhodamine B (RhB) in the presence of triangular silver nanodisks in which perfect overlap between the absorption of the absorber and the fluorescence of the fluorophore was observed. The fluorescence quenching mechanism of RhB was investigated under various excitation wavelengths, together with measurement of the fluorescence lifetime. The quenching efficiency of RhB was proportional to the wavelength excitation. Remarkably, the highest efficiency of fluorescence quenching of RhB was achieved (∼60%). The quenching mechanism was investigated and revealed to be mostly due to the inner filter effect (IFE) mechanism, without the contribution of energy transfer. This result shows a completely different story from most previous studies based on silver nanoparticles, where energy transfer was reported to play a significant role.

Silver nanoparticles decorated ZnO-CuO core-shell nanowire arrays with low water adhesion and high antibacterial activity

Nanostructured surfaces based on silver nanoparticles decorated ZnO-CuO core-shell nanowire arrays, which can assure protection against various environmental factors such as water and bacteria were developed by combining dry preparation techniques namely thermal oxidation in air, radio frequency (RF) magnetron sputtering and thermal vacuum evaporation. Thus, high-aspect-ratio ZnO nanowire arrays were grown directly on zinc foils by thermal oxidation in air. Further ZnO nanowires were coated with a CuO layer by RF magnetron sputtering, the obtained ZnO-CuO core-shell nanowires being decorated with Ag nanoparticles by thermal vacuum evaporation. The prepared samples were comprehensively assessed from morphological, compositional, structural, optical, surface chemistry, wetting and antibacterial activity point of view. The wettability studies show that native Zn foil and ZnO nanowire arrays grown on it are featured by a high water droplet adhesion while ZnO-CuO core-shell nanowire arrays (before and after decoration with Ag nanoparticles) reveal a low water droplet adhesion. The antibacterial tests carried on Escherichia coli (a Gram-negative bacterium) and Staphylococcus aureus (a Gram-positive bacterium) emphasize that the nanostructured surfaces based on nanowire arrays present excellent antibacterial activity against both type of bacteria. This study proves that functional surfaces obtained by relatively simple and highly reproducible preparation techniques that can be easily scaled to large area are very attractive in the field of water repellent coatings with enhanced antibacterial function.

Biosynthesis of Silver Nanoparticles at Various pH values and their Applications in Capturing Irradiation Solar Energy

BACKGROUND

Metallic nanoparticles (NPs), in general, are able, due to the high surface area per unit volume, to absorb the maximum incoming light flux through the vicinity of plasmonic structures and then provide local heating. Thus, silver (Ag) NPs has been used to generate heat and increase the temperature of water from solar radiation energy. The optimal plasmonic heating generation can be obtained as soon as the wavelength of the light source is close to the plasmonic resonance wavelength of Ag NPs.

OBJECTIVE

Ag NPs have been fabricated through a straightforward, cheap, as well as environmentally friendly approach. In this study, Salix babylonica L., weeping willow leaf extract has been utilized as a reducing, capping, and stabilizing agent, without using any other toxic materials. The importance of this study lies in the generation of hot electrons, which can be obtained by collecting the solar spectrum near the infrared and infrared regions, which cannot be obtained by the conventional photocatalytic devices.

METHODS

Numerous characterization techniques such as; UV-Vis, FT-IR spectroscopy, X-ray diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), scanning electron microscopy (SEM), and energy dispersive X-ray (EDX) analysis were used to study the optical, chemical, structural, morphological, properties of the Ag NPs.

RESULTS

The impact of pH on the properties of Ag NPs and their performance to generate heat during solar irradiation have been investigated intensively. This study showed that the synthesized Ag NPs with pH value 12 is the optimum condition and can increase the temperature of water dramatically.

CONCLUSION

An evaluation of the current patents displays that the field of green synthesis Ag NPs utilizing plant extracts is a vital field and produces rather stable, safe and effective Ag NPs. The novelty of this patent is that Ag NPs can be synthesized from a one-pot reaction without using any exterior stabilizing and reducing agent, which is not conceivable by means of the existing processes. This study, also, is rare and distinctive, and it demonstrates that even a slight quantity of the Ag NPs is significantly raising the temperature of water effectively.

Physical Properties and the Reconstruction of Unstable Decahedral Silver Nanoparticles Synthesized Using Plasmon-Mediated Photochemical Process

Plasmon-mediated shape transformation from quasi-spherical silver nanoparticles (AgNPs) to silver nanoprisms (AgNPrs) and decahedral silver nanoparticles (D-AgNPs) under irradiation of blue LEDs (λ = 456 ± 12 nm, 80 mW/cm²) was studied at temperatures ranging between 60, 40, 30, 20, 10, and 0 °C. It was found that reaction temperature affected transformation rates and influenced the morphology distribution of final products. The major products synthesized at temperatures between 60 °C and 0 °C were AgNPrs and D-AgNPs, respectively. The D-AgNPs synthesized at such low temperatures are unstable and become blunt when light irradiation is removed after the photochemical synthesis. These blunt nanoparticles with pentagonal multiple-twinned structures can be further used as the seeds to reconstruct complete D-AgNPs after irradiating blue LEDs at various bath temperatures. Our results showed that these rebuilt D-AgNPs are much more stable when at higher bath temperatures. Furthermore, the rebuilt D-AgNPs (edge lengths ~41 nm) can grow into larger D-AgNPs (edge lengths ~53 nm) after the irradiation of green LEDs. Surface-enhanced Raman spectra of CV in AgNP colloids showed that D-AgNP colloids have better SERS enhancements factors than AgNPrs.

Lignin-mediated in-situ synthesis of CuO nanoparticles on cellulose nanofibers: A potential wound dressing material

Herein we present our research on the synthesis of CuO nanoparticles on the surface of electrospun cellulose (CE) nanofibers using alkali lignin as a reducing agent. Fascinatingly, CA nanofibers were deacetalized during alkali lignin treatment, which was verified by FTIR-ATR spectra. The morphology of the produced nanofibers was observed with SEM and TEM. The presence of CuO nanoparticles was verified by EDX, XRD, and XPS. The Cu/CE nanofibers showed low thermal stability. MVTR values of 2100-1900 g/m²/day are adequate for the transport of air and moisture from the wound surface. The Cu/CE showed faster release (80%) of copper ions to aqueous environment within 24 h and seemed to advance towards plateau for the next five days. The Cu/CE nanofibrous mats exhibited excellent antibacterial efficacy against both gram-negative Escherichia coli (E. coli) and gram-positive Staphylococcus aureus (S. aureus) bacteria. NIH3T3 fibroblast cells have excellent migrating and proliferating ability on our prepared nanofibrous mats. The presence of bound alkali lignin on the surface of nanofibers added a benefit of antioxidant activity. These findings revealed that such type of nanofibrous mats could be used as a potential wound dressing material.

Functionalization of eggshell membranes with CuO-ZnO based p-n junctions for visible light induced antibacterial activity against Escherichia coli

Biopolymers provide versatile platforms for designing naturally-derived wound care dressings through eco-friendly pathways. Eggshell membrane (ESM), a widely available, biocompatible biopolymer based structure features a unique 3D porous interwoven fibrous protein network. The ESM was functionalized with inorganic compounds (Ag, ZnO, CuO used either separately or combined) using a straightforward deposition technique namely radio frequency magnetron sputtering. The functionalized ESMs were characterized from morphological, structural, compositional, surface chemistry, optical, cytotoxicity and antibacterial point of view. It was emphasized that functionalization with a combination of metal oxides and exposure to visible light results in a highly efficient antibacterial activity against Escherichia coli when compared to the activity of individual metal oxide components. It is assumed that this is possible due to the fact that an axial p-n junction is created by joining the two metal oxides. This structure separates into components the charge carrier pairs promoted by visible light irradiation that further can influence the generation of reactive oxygen species which ultimately are responsible for the bactericide effect. This study proves that, by employing inexpensive and environmentally friendly materials (ESM and metal oxides) and fabrication techniques (radio frequency magnetron sputtering), affordable antibacterial materials can be developed for potential applications in chronic wound healing device area.

Fungus- (Alternaria sp.) Mediated Silver Nanoparticles Synthesis, Characterization, and Screening of Antifungal Activity against Some Phytopathogens

The scientific consensus is now on developing a biocontrol agent that can cause cellular metabolic reprogramming against agricultural pathogens. Biosynthesis of silver nanoparticles was performed by using phytopathogenic fungi (Alternaria sp.) isolated from banana cultivated soil. Alternaria sp. can grow very fast and produce high enough bioactive compounds. This study aims to biosynthesize silver nanoparticles (AgNPs) using fungal Alternaria sp.’s metabolites as a safe antifungal agent against plant pathogenic fungi (Fusarium spp. and Alternaria sp.). To visualize the formation of AgNPs, analytical instruments were used, such as ultraviolet-visible (UV-Vis) spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, scanning transmission electron microscopy (STEM), energy dispersive X-ray (EDX), and elemental mapping. The UV-visible spectra showed a peak at 435 nm. Analysis of scanning transmission electron microscopy (STEM) micrographs evidenced that the size of synthesized silver nanoparticles ranged between 3 and 10 nm. The resulting AgNPs showed distinct antifungal activity against selected plant pathogenic fungi. Synthesized AgNPs have demonstrated remarkable potential for the use of antifungal compounds to combat plant diseases.

The sensitive detection of methylene blue using silver nanodecahedra prepared through a photochemical route

In this work, we have carried out systematic studies on the critical role of polyvinyl pyrrolidone (PVP) and citrate in the well-known chemical reduction route to synthesize silver nanodecahedra (AgND). Silver nitrate (AgNO₃) was used as silver source, which can be directly converted to metallic silver after being reduced by sodium borohydride (NaBH₄) under blue light-emitting diode (LED) irradiation (λ _max = 465 nm), and polyvinyl pyrrolidone (PVP) as a capping agent to assist the growth of AgND. The obtained products were silver nanodecahedra of excellent uniformity and stability with high efficiency and yield. The results showed that PVP acted as a capping agent to stabilize the silver nanoparticles, prolonging the initiation time required for nanodecahedra nucleation, thus inducing anisotropic growth, allowing the size and morphology of the AgND to be controlled successfully. This improved understanding allows a consistent process for the synthesis of AgND with significantly enhanced reproducibility to be developed and the formation mechanism of these nanostructures to be elucidated. This is a simple, cost-effective and easily reproducible method for creating AgND. The typical absorption maxima in the UV-vis spectroscopy of Ag seeds was λ _max ∼400 nm and that of AgND was λ _max ∼480 nm. The size of the prepared AgND was in the range of 60-80 nm. SEM images confirmed the uniform and high density of AgND when the concentration of PVP was 0.5 mM. The XRD pattern showed that the final product of AgND was highly crystallized. In addition, the prepared AgND can be used to detect methylene blue (MB) in a sensitive manner with good reproducibility and stability using Surface-Enhanced Raman Scattering (SERS) phenomenon. Out of the obtained products, the AgND prepared with 50 min blue LED light irradiation (AgND-50) displayed the strongest SERS signal. Interestingly, MB in diluted solution can be detected with a concentration as low as 10^-7 M (the limit of detection, LOD) and the linear dependence between SERS intensity and the MB concentration occurred in the range from 10^-7 to 10^-6 M. The enhancement factor (EF) of the SERS effect was about 1.602 × 10⁶ with a MB concentration of 10^-7 M using 532 nm laser excitation.

Effect of Annealing on the Microstructure and SERS Performance of Mo-48.2% Ag Films

Mo-48.2% Ag films were fabricated by direct current (DC) magnetron sputtering and annealed in an argon atmosphere. The effects of annealing on the surface morphology, resistivity and surface-enhanced Raman scattering (SERS) performance of Mo-48.2% Ag films were investigated. Results show a mass of polyhedral Ag particles grown on the annealed Mo-48.2% Ag films' surface, which are different from that of as-deposited Mo-Ag film. Moreover, the thickness and the resistivity of Mo-48.2% Ag films gradually decrease as the annealing temperature increases. Furthermore, finite-difference time-domain (FDTD) simulations proved that the re-deposition Ag layer increases the "hot spots" between adjacent Ag nanoparticles, thereby greatly enhancing the local electromagnetic (EM) field. The Ag layer/annealed Mo-48.2% Ag films can identify crystal violet (CV) with concentration lower than 5 × 10-10 M (1 mol/L = 1 M), which indicated that this novel type of particles/films can be applied as ultrasensitive SERS substrates.

Silver nanosol SERS quantitative analysis of ultratrace biotin coupled N-doped carbon dots catalytic amplification with affinity reaction

Highly catalytic and stable N-doped carbon dots (N-CDs) were prepared rapidly by microwave procedure using glucose as precursor and ammonium sulfite as N-dopant. The reduction of AgNO₃ by trisodium citrate (TCA) was slow to form nanosilver (AgNP), and the N-CDs exhibited strong catalysis of the AgNP reaction. The formed AgNPs were used as indicator in the presence of Vitoria blue B (VBB) molecule probe with a SERS peak at 1615 cm^-1. With the increase of nancatalyst N-CDs concentration, the AgNP reaction speed up, and the SERS peak of VBB enhanced linearly due to formation of more AgNPs as substrate. In the presence of avidin (Ad), the SERS peak weakened. Upon addition of biotin, the SERS peak enhanced due to turn on the indicator nanoreaction. The enhanced SERS signal had a good linear relationship with the biotin concentration in range of 0.0006-0.021 ng/mL, with a detection limit of 0.3 pg/mL.

The structural transition of bimetallic Ag-Au from core/shell to alloy and SERS application

It is well-known that Ag-Au bimetallic nanoplates have attracted significant research interest due to their unique plasmonic properties and surface-enhanced Raman scattering (SERS). In recent years, there have been many studies on the fabrication of bimetallic nanostructures. However, controlling the shape, size, and structure of bimetallic nanostructures still has many challenges. In this work, we present the results of the synthesis of silver nanoplates (Ag NPls), and Ag-Au bimetallic core/shell and alloy nanostructures, using seed-mediated growth under green LED excitation and a gold salt (HAuCl4) as a precursor of gold. The results show that the optical properties and crystal structure strongly depend on the amount of added gold salt. Interestingly, when the amount of gold(x) in the sample was less than 0.6 μmol (x < 0.6 μmol), the structural nature of Ag-Au was core/shell, in contrast x > 0.6 μmol gave the alloy structure. The morphology of the obtained nanostructures was investigated using the field emission scanning electron microscopy (FESEM) technique. The UV-Vis extinction spectra of Ag-Au nanostructures showed localized surface plasmon resonance (LSPR) bands in the spectral range of 402-627 nm which changed from two peaks to one peak as the amount of gold increased. Ag-Au core/shell and alloy nanostructures were utilized as surface enhanced Raman scattering (SERS) substrates to detect methylene blue (MB) (10-7 M concentration). Our experimental observations indicated that the highest enhancement factor (EF) of about 1.2 × 107 was obtained with Ag-Au alloy. Our detailed investigations revealed that the Ag-Au alloy exhibited significant EF compared to pure metal Ag and Ag-Au core/shell nanostructures. Moreover, the analysis of the data revealed a linear dependence between the logarithm of concentration (log C) and the logarithm of SERS signal intensity (log I) in the range of 10-7-10-4 M with a correlation coefficient (R 2) of 0.994. This research helps us understand better the SERS mechanism and the application of Raman spectroscopy on a bimetallic surface.

Photochemical Synthesis of Silver Nanodecahedrons under Blue LED Irradiation and Their SERS Activity

Silver nanodecahedrons were successfully synthesized by a photochemical method under irradiation of blue light-emitting diodes (LEDs). The formation of silver nanodecahedrons at different LED irradiation times (0–72 h) was thoroughly investigated by employing different characterization methods such as ultraviolet–visible spectroscopy (UV–Vis), transmission electron microscopy (TEM), and Raman spectroscopy. The results showed that silver nanodecahedrons (AgNDs) were formed from silver nanoseeds after 6 h of LED irradiation. The surface-enhanced Raman scattering (SERS) effects of the synthesized AgNDs were also studied in comparison with those of spherical silver nanoparticles in the detection of 4-mercapto benzoic acid. Silver nanodecahedrons with a size of 48 nm formed after 48 h of LED irradiation displayed stronger SERS properties than spherical nanoparticles because of electromagnetic enhancement. The formation mechanism of silver nanodecahedrons is also reported in our study. The results showed that multihedral silver nanoseeds favored the formation of silver nanodecahedrons.

Climatic Conditions: Conventional and Nanotechnology-Based Methods for the Control of Mosquito Vectors Causing Human Health Issues

Climate variability is highly impacting on mosquito-borne diseases causing malaria and dengue fever across the globe. Seasonal variability change in temperature and rainfall patterns are impacting on human health. Mosquitoes cause diseases like dengue fever, yellow fever, malaria, Chikungunya, West Nile and Japanese encephalitis. According to estimations by health organizations, annually one million human deaths are caused by vector-borne diseases, and dengue fever has increased about 30-fold over the past 50 years. Similarly, over 200 million cases of malaria are being reported annually. Mosquito-borne diseases are sensitive to temperature, humidity and seasonal variability. Both conventional (environmental, chemical, mechanical, biological etc.) and nanotechnology-based (Liposomes, nano-suspensions and polymer-based nanoparticles) approaches are used for the eradication of Malaria and dengue fever. Now green approaches are used to eradicate mosquitoes to save human health without harming the environment. In this review, the impact of climatic conditions on mosquito-borne diseases along with conventional and nanotechnology-based approaches used for controlling malaria and dengue fever have been discussed. Important recommendations have been made for people to stay healthy.

Detection of Permethrin pesticide using silver nano-dendrites SERS on optical fibre fabricated by laser-assisted photochemical method

Permethrin, 3-Phenoxybenzyl (1 RS)-cis,trans-3-(2,2-dichlorovinyl)- 2,2-dimethylcyclopropanecarboxylate, has a wide range of applications like insecticide, insect repellent and prevents mosquito-borne diseases, such as dengue fever and malaria in tropical areas. In this work, we develop a prominent monitoring method for the detection of permethrin pesticide using surface-enhanced Raman scattering (SERS) optical fibre substrates. The novel SERS-active optical fibre substrates were grown and deposited silver (Ag) nano-dendrites on the end of multi-mode fibre core by laser-assisted photochemical method. The characteristic of the Ag-nanostructures could be controlled by the experimental conditions, namely, laser illumination time. Ag nanoparticles optical fibre substrates and Ag nano-dendrites optical fibre substrates were prepared with laser illumination time of 3 min and 8 min, respectively. The achieved SERS-activity optical fibre substrates were tested with Rhodamine 6G aqueous solutions. We demonstrate that the SERS activity coupled with Ag nano-dendrites optical fibre substrate has higher Raman enhancement factor due to the creation of many of hot-spots for amplifying Raman signals. Besides, the stability and reproducibility of the Ag nano-dendrites optical fibre substrate were also evaluated with stored time of 1000 hours and relative standard deviation of less than 3%. The Ag nano-dendrite optical fibre substrate was selected for detection of permethrin pesticide in the concentration range of 0.1 ppm-20 ppm with limit of quantification (LOQ) of 0.1 ppm and calculated limit of detection (LOD) of 0.0035 ppm, proving its great potential for direct, rapid detection and monitoring of permethrin.

Synthesis and characterization of size- and shape-controlled silver nanoparticles

Silver nanoparticles (AgNPs) have application potential in diverse areas ranging from wound healing to catalysis and sensing. The possibility for optimizing the physical, chemical and optical properties for an application by tailoring the shape and size of silver nanoparticles has motived much research on methods for synthesis of size- and shape-controlled AgNPs. The shape and size of AgNPs are reported to vary depending on choice of the Ag precursor salt, reducing agent, stabilizing agent and on the synthesis technique used. This chapter provides a detailed review on various synthesis approaches that may be used for synthesis of AgNPs of desired size and shape. Silver nanoparticles may be synthesized using diverse routes, including, physical, chemical, photochemical, biological and microwave -based techniques. Synthesis of AgNPs of diverse shapes, such as, nanospheres, nanorods, nanobars, nanoprisms, decahedral nanoparticles and triangular bipyramids is also discussed for chemical-, photochemical- and microwave-based synthesis routes. The choice of chemicals used for reduction and stabilization of nanoparticles is found to influence their shape and size significantly. A discussion on the mechanism of synthesis of AgNPs through nucleation and growth processes is discussed for AgNPs of varying shape and sizes so as to provide an insight on the various synthesis routes. Techniques, such as, electron microscopy, spectroscopy, and crystallography that can be used for characterizing the AgNPs formed in terms of their shape, sizes, crystal structure and chemical composition are also discussed in this chapter.

Graphical Abstract:

Determination of halides using Ag nanoparticles-modified disposable electrodes. A first approach to a wearable sensor for quantification of chloride ions

This work reports a simple voltammetric method for the determination of chloride, bromide, and iodide ions using screen-printed carbon electrodes modified with silver nanoparticles electrochemically deposited on the working electrode surface. UV/Vis absorption spectroelectrochemistry was used to study the electrodeposition of silver nanoparticles on the working carbon electrode on PET or Gore-Tex^® supports, and their subsequent oxidation in the presence of halide ions. The main figures of merit of the developed sensors, such as reproducibility and detection limit, have been calculated. Reproducibility values of 2.22%, 2.83% and 3.23% were obtained for chloride, bromide and iodide determinations, respectively. Additionally, the lowest detected amount of chloride, bromide and iodide ions were 3.0·10^-6 M, 5.0·10^-6 M and 5.0·10^-6 M, respectively. Taking into account the relevance of the determination of chloride ion concentration in sweat, the voltammetric method for the determination of halides has been successfully transferred to a Gore-Tex^® support to build a first approach to a wearable sensor that facilitates the quantification of this ion in sweat samples. The Gore-Tex^® sensor provides a good reproducibility (RSD = 1.61%).

Antimicrobial dependence of silver nanoparticles on surface plasmon resonance bands against Escherichia coli

This study presents a simple and trouble-free method for determining the antimicrobial properties of silver nanoparticles (AgNPs) based on the surface plasmon resonance (SPR) bands. AgNPs were prepared by chemical reduction method using silver nitrates as a metallic precursor and formaldehyde (HCHO) as a reducing agent and capped by polyethylene glycol. Effects of several processing variables on the size and shape of AgNPs were monitored using an ultraviolet–visible spectrophotometer based on their SPR bands. The formed particles showing various particle shapes and full width at half maximum (FWHM) were tested against Escherichia coli by surface spreading using agar plates containing equal amounts of selected AgNPs samples. The NPs exhibited higher antimicrobial properties; however, monodispersed spherical NPs with narrow FWHM were more effective against E. coli growth. The NPs prepared are promising candidates in diverse applications such as antimicrobial agents in the food and biomedical industries.

Silver nanoparticles synthesized using aqueous leaf extract of Ziziphus oenoplia (L.) Mill: Characterization and assessment of antibacterial activity

Biological approach to synthesis of metal nanoparticles using aqueous leaf extract is a highly relevant and recent theme in nanotechnological research. Phytosynthesized AgNPs have better inhibitory and antimicrobial effects compared to aqueous leaf extract and silver nitrate. In the present investigation crystalline silver nanoparticles (AgNPs) with size of 10nm have been successfully synthesized using aqueous leaf extract (AQLE) of Ziziphus oenoplia (L.) Mill., which act as both reducing as well as capping agent. The particles were characterized using UV Visible spectroscopy, HRTEM-EDAX, XRD, FT-IR and DLS. An evaluation of the anti bacterial activity was carried out using Agar well diffusion method and MIC determination against four bacterial strains, Klebsiella pneumoniae, Pseudomonas aeruginosa, Escherichia coli and Salmonella typhi; the AgNPs exhibited quite high antibacterial activity. Furthermore, bactericidal studies with TEM at different time intervals after AgNPs treatment showed the presence of AgNPs near cell membrane of bacteria at about 30min exposure and the bacterial-lysis was found completed at 24h. This gave an insight on the mechanism of bacterial-lysis by direct damage to the cell membrane.

One-Pot Synthesis of Icosahedral Silver Nanoparticles by Using a Photoassisted Tartrate Reduction Method under UV Light with a Wavelength of 310 nm

A photoassisted citrate reduction reaction under blue LEDs is an easy and highly reproducible method to synthesize high-yield decahedral silver nanoparticles (AgNPs) in the absence of seeds in the initial photochemical reaction. In this study, icosahedral AgNPs with sizes of 80 to 150 nm could be synthesized by using the photoassisted tartrate reduction method under UV light with a wavelength of λ=(310±12) nm. The product yield of icosahedral AgNPs is higher than 90 %. SAED (selected-area electron diffraction) patterns and XRD (X-ray diffraction) spectra show that these AgNPs have multiply twinned structures. High-resolution TEM and dark-field TEM show that the facet of the triangular planes of these icosahedral AgNPs is {111}. This is the first report of icosahedral AgNPs synthesized by using a seed-free photochemical method. SERS (surface-enhanced Raman scattering) of Crystal Violet (CV) measurements show that the as-prepared icosahedral AgNP colloids have excellent SERS enhancement factors, which are approximately four and six times the enhancement factors of decahedral AgNP colloids and thermal-citrate-reduction AgNP colloids, respectively.

Influence of Temperature on the Formation of Silver Nanoparticles by using a Seed-Free Photochemical Method under Sodium-Lamp Irradiation

Silver nanoparticles can be prepared by using a seed-free photo-assisted citrate reduction method under the irradiation of a sodium lamp. Under the same irradiation intensity, bath temperatures are crucial in influencing the reaction rate, morphologies of final products, and shape evolution of the silver nanostructures. For example, when the bath temperature is 80 °C, the product yields of silver nanoplates, nanorods, and nanodecahedra are 38±6 %, 35±10 %, and 12±8 %, respectively. However, when the bath temperature is 30 °C, the product yields of silver nanoplates, nanorods, and nanodecahedra are 6±3 %, 0 %, and 83±16 %, respectively. Time-dependent UV/Vis spectra and TEM images show that silver nanoplates were formed at the earlier reaction stage and greatly decreased in amount at the later stage when the bath temperatures are less than or equal to 40 °C. This indicates that the silver nanoplates, which can be regarded as intermediates, are kinetically favored products. They are not thermodynamically favored products at these relatively low bath temperatures. The SERS spectra of crystal violet (CV) show that all the silver colloids synthesized at various temperatures exhibit good enhancement factors and that the colloids prepared at lower bath temperatures have a higher enhancement factor.