Preparation and Electrochemical Characterization of Mesoporous Polyaniline-Silica Nanocomposites as an Electrode Material for Pseudocapacitors

Small but bright: origin of the enhanced luminescence of ultrasmall ZnGa2O4:Cr3+ in mesoporous silica nanoparticles

Chromium(III)-doped zinc gallate (CZGO) is one of the representative persistent luminescent phosphors emitting in the near-infrared (NIR) region. The emission wavelength it covers falls in the tissue-transparent window, making CZGO a promising optical probe for various biomedical applications. The PersL mechanism dictates that such a phenomenon is only profound in large crystals, so the preparation of CZGO with sizes small enough for biological applications while maintaining its luminescence remains a challenging task. Recent attempts to use mesoporous silica nanoparticles (MSN) as a template for growing nanosized CZGO have been successful. MSN is also a well-studied drug carrier, and incorporating CZGO in MSN further expands its potential in imaging-guided therapeutics. Despite the interest, it is unclear of how the addition of MSN would affect the luminescence properties of CZGO. In this work, we observed that forming a CZGO@MSN nanocomposite could enhance the luminescence intensity and extend the PersL lifetime of CZGO. X-ray absorption fine structure (XAFS) analysis was conducted to investigate the local structure of Zn2+, and an interaction between Zn2+ in CZGO and the MSN matrix was identified.

Rice husk-derived nano-SiO2 assembled on reduced graphene oxide distributed on conductive flexible polyaniline frameworks towards high-performance lithium-ion batteries

By combining rice husk-derived nano-silica and reduced graphene oxide and then polymerizing PANI by in situ polymerization, we created polyaniline-coated rice husk-derived nano-silica@reduced graphene oxide (PANI-SiO₂@rGO) composites with excellent electrochemical performance. ATR-FTIR and XRD analyses confirm the formation of PANI-SiO₂@rGO, implying that SiO₂@rGO served as a template in the formation of composites. The morphology of PANI-SiO₂@rGO was characterized by SEM, HRTEM, and STEM, in which SiO₂ nanoparticles were homogeneously loaded on graphene sheets and the PANI fibrous network uniformly covers the SiO₂@rGO composites. The structure can withstand the large volume change as well as retain electronic conductivity during Li-ion insertion/extraction. Over 400 cycles, the assembled composite retains a high reversible specific capacity of 680 mA h g^-1 at a current density of 0.4 A g^-1, whereas the SiO₂@rGO retains only 414 mA h g^-1 at 0.4 A g^-1 after 215 cycles. The enhanced electrochemical performance of PANI-SiO₂@rGO was a result of the dual protection provided by the PANI flexible layer and graphene sheets. PANI-SiO₂@rGO composites may pave the way for the development of advanced anode materials for high-performance lithium-ion batteries.

L-Ascorbic Acid-g-Polyaniline Mesoporous Silica Nanocomposite for Efficient Removal of Crystal Violet: A Batch and Fixed Bed Breakthrough Studies

In the present study, mesoporous silica nanoparticles (MSNs) synthesized through sol-gel process and calcined at 600 °C were further surface functionalized by a copolymer chain of L-ascorbic acid (AS) and polyaniline (PAni) by in situ free radical oxidative polymerization reaction. The surface modification of MSNs by AS-g-PAni was confirmed by using various analytical techniques, namely FTIR, XRD, SEM-EDX, TEM and AFM. The composition of AS-g-PAni@MS was found to be composed of C (52.53%), N (20.30%), O (25.69%) and Si (1.49%), with 26.42 nm as the particle size. Further, it was applied for the adsorption of crystal violet (CV) dye under batch, as well as fixed bed method. RSM-BBD was taken into consideration, to optimize the various operational parameters effecting the adsorption through batch method. To explore maximum efficiency of the material, it was further subjected to adsorption of CV under fixed bed method, using the variable bed heights of 3.7, 5.4 and 8.1 cm. Based on high value of regression coefficient (R2) and low value of RMSE given as (0.99, 0.02) for 3.7 cm, (0.99, 0.03), the breakthrough data were very well defined by the Thomas model, with optimum concurrence of stoichiometric adsorption capacity values. The external mass transfer equilibrium data were well fitted by the Langmuir model, with maximum monolayer adsorption capacity of 88.42 mg g-1 at 303K, 92.51 mg g-1 at 313 K, 107.41 mg g-1 at 313 K and 113.25 mg g-1 at 333 K. The uptake of CV by AS-g-PAni@MS was well defined by pseudo second order model with rate constant K2 = 0.003 L mg-1 min-1 for 50 and 0.003 L mg-1 min-1 for 60 mg L-1 CV. The adsorption reaction was endothermic with enthalpy (ΔH) value of 3.62 KJ mol-1 and highly efficient for treatment of CV-contaminated water for more the five consecutive cycles.

Sorption of some radionuclides from nuclear waste effluents by polyaniline/SiO2 composite: Characterization, thermal stability, and gamma irradiation studies

Polyaniline/SiO₂ composite was successfully prepared via in situ polymerization using polyvinyl alcohol as a surfactant. The prepared PAn/SiO₂ composite was used for the removal of Zr(IV), U(VI), and Mo(VI) ions from their liquid solutions. PAn/SiO₂ composite was characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The synthesized composite was irradiated with γ-radiation from a Co-60 radioactive source with absorbed dose 50, 100, and 150 kGy and the corresponding changes in structural properties of the composites were studied. The thermal and radiation stabilities of PAn/SiO₂ composite in terms of saturation capacities were studied. PAn/SiO₂ composite has a good thermal stability as it retained about 78.83% of its saturation capacity upon heating at 400±1 °C, while the saturation capacity of PAn/SiO₂ composite was increased from 191.28 to 319.16 mg/g for Zr(IV) with varying the irradiated doses from 0 to 150 kGy. The sorption studies for several metal ions revealed marked selectivity of PAn/SiO₂ composite towards Zr(IV), U(VI), and Mo(VI) ions with selectivity order; Zr(IV) > U(VI) > Mo(VI). The results indicated that PAn/SiO₂ composite removed 95.33, 75.97, and 52.87% from Zr(IV), U(VI), and Mo(VI) ions, respectively at pH 3.26. Hence, analytical utility of PAn/SiO₂ composite was accomplished by performing some quantitative separation such as separation of U(VI) ions from monazite leachate and separation of Zr(IV), U(VI), and Mo(VI) ions from simulated liquid waste. Thermodynamic parameter studies concluded that the adsorption of Zr(IV), U(VI), and Mo(VI) ions was spontaneous and endothermic in nature.

Improving electrochemical performance of reduced graphene oxide by counteracting its aggregation through intercalation of nanoparticles

Herein, we report the fabrication and characterization of hybrid electrode material for supercapacitor applications. CaCO₃ nanoparticles (Nps) are used as intercalator to avoid the restacking behavior of reduced graphene oxide (rGO) nanosheets. CaCO₃ Nps and rGO sheets are fabricated employing precipitation technique and microwave irradiation method, respectively. The intercalation process is performed by magnetic stirring followed by ultra-sonication technique. As prepared CaCO₃ Nps, rGO and rGO intercalated with 2.5 wt.% and 5 wt.% CaCO₃ Nps are characterized using X-ray diffraction analysis, Fourier transform infrared spectroscopy and field emission scanning electron microscopy to evaluate the crystalline characteristics, molecular vibrations, and morphology, respectively. The prepared electrode materials are coated separately on the glassy carbon electrode and their electrochemical performance displayed remarkable capacitance values for rGO nanosheets intercalated with 2.5 wt.% and 5 wt.% CaCO₃ Nps. From the obtained results, it is clear that the specific capacitance of 2.5 wt.% CaCO₃ intercalated rGO displays higher specific capacitance of 84.5 F/g at 5 mV/s with high retention stability. The mechanism behind the improvement in the electrochemical behavior is due to the increase in active surface area which is explained via Brunauer-Emmett-Teller analysis and energy-dispersive X-ray spectroscopic analysis.

Laser Processed Antimicrobial Nanocomposite Based on Polyaniline Grafted Lignin Loaded with Gentamicin-Functionalized Magnetite

Composite thin coatings of conductive polymer (polyaniline grafted lignin, PANI-LIG) embedded with aminoglycoside Gentamicin sulfate (GS) or magnetite nanoparticles loaded with GS (Fe₃O₄@GS) were deposited by the matrix-assisted pulsed laser evaporation (MAPLE) technique. The aim was to obtain such nanostructured coatings for titanium-based biomedical surfaces, which would induce multi-functional properties to implantable devices, such as the controlled release of the therapeutically active substance under the action of a magnetic and/or electric field. Thus, the unaltered laser transfer of the initial biomaterials was reported, and the deposited thin coatings exhibited an appropriate nanostructured surface, suitable for bone-related applications. The laser processing of PANI-LIG materials had a meaningful impact on the composites' wettability, since the contact angle values corresponding to the composite laser processed materials decreased in comparison with pristine conductive polymer coatings, indicating more hydrophilic surfaces. The corrosion resistant structures exhibited significant antimicrobial activity against Escherichia coli, Staphylococcus aureus, and Candida albicans strains. In vitro cytotoxicity studies demonstrated that the PANI-LIG-modified titanium substrates can allow growth of bone-like cells. These results encourage further assessment of this type of biomaterial for their application in controlled drug release at implantation sites by external activation.

Fabrication of 1,4-dioxane sensor based on microwave assisted PAni-SiO2 nanocomposites

In this study, conducting polyaniline (PAni) and silicon dioxide (SiO₂) nanocomposites (NCs) were synthesized for chemical sensing applications by microwave assisted reaction technique. Facile synthesis and characterization of the PAni-SiO₂ nanocomposites were investigated in details and discussed in this report. For the potential application, 1,4-dioxane chemical sensor was fabricated with the PAni-SiO₂ nanocomposites deposited onto glassy carbon electrode (GCE). A very thin uniform film was deposited onto GCE with nanocomposite by using conducting 5% nafion binder at room conditions. To evaluate the sensor analytical performances, a calibration plot such as current versus concentration of 1,4-dioxane was drawn and calculated the analytical parameters from the slope of calibration curve. Results are found as sensitivity (0.5934 µAµmol^-1 L^-2 cm^-2), detection limit (16.0 ± 0.8 pmol L^-1), and quantification limit (LOQ; 53.3 ± 1.5 pmol L^-1) in this observation. Considering the linear region in calibration plot, the linear dynamic range of 1,4-dioxane chemical sensor was found (0.12 nmol L^-1 ∼ 1.2 mmol L^-1). Besides this, the proposed 1,4-dioxane chemical sensor was exhibited good reproducibility, long-term stability, high accuracy in detecting of 1,4-dioxane in real environmental samples. This research is to develop of a selective and an efficient electrochemical sensor. It might be a simple and easy way by applying electrochemical method to ensure the safe and sustainable green environment.

High Electrochemical Performance Phosphorus-Oxide Modified Graphene Electrode for Redox Supercapacitors Prepared by One-Step Electrochemical Exfoliation

Phosphorus oxide modified graphene was prepared by one-step electrochemical anodic exfoliation method and utilized as electrode in a redox supercapacitor that contained potassium iodide in electrolytes. The whole preparation process was completed in a few minutes and the yield was about 37.2%. The prepared sample has better electrocatalysis activity for I⁻/I⁻₃ redox reaction than graphite due to the good charge transfer performance between phosphorus oxide and iodide ions. The maximum discharge specific capacitance is 1634.2 F/g when the current density is 3.5 mA/cm² and it can keep at 463 F/g after 500 charging–discharging cycles when the current density increased about three times.

High Performance of Supercapacitor from PEDOT:PSS Electrode and Redox Iodide Ion Electrolyte

Insufficient energy density and poor cyclic stability is still challenge for conductive polymer-based supercapacitor. Herein, high performance electrochemical system has been assembled by combining poly (3,4-ethylenedioxythiophene) (PEDOT):poly (styrene sulfonate) (PSS) redox electrode and potassium iodide redox electrolyte, which provide the maximum specific capacity of 51.3 mAh/g and the retention of specific capacity of 87.6% after 3000 cycles due to the synergic effect through a simultaneous redox reaction both in electrode and electrolyte, as well as the catalytic activity for reduction of triiodide of the PEDOT:PSS.

Silica Modified with Polyaniline as a Potential Sorbent for Matrix Solid Phase Dispersion (MSPD) and Dispersive Solid Phase Extraction (d-SPE) of Plant Samples

Polyaniline (PANI) is one of the best known conductive polymers with multiple applications. Recently, it was also used in separation techniques, mostly as a component of composites for solid-phase microextraction (SPME). In the present paper, sorbent obtained by in situ polymerization of aniline directly on silica gel particles (Si-PANI) was used for dispersive solid phase extraction (d-SPE) and matrix solid–phase extraction (MSPD). The efficiency of both techniques was evaluated with the use of high performance liquid chromatography with diode array detection (HPLC-DAD) quantitative analysis. The quality of the sorbent was verified by Raman spectroscopy and microscopy combined with automated procedure using computer image analysis. For extraction experiments, triterpenes were chosen as model compounds. The optimal conditions were as follows: protonated Si-PANI impregnated with water, 160/1 sorbent/analyte ratio, 3 min of extraction time, 4 min of desorption time and methanolic solution of ammonia for elution of analytes. The proposed procedure was successfully used for pretreatment of plant samples.

Bifunctional Hybrid Composites from Collagen Biowastes for Heterogeneous Applications

We report the synthesis of an electrically conductive and magnetically active hybrid biocomposite comprising collagen and polyaniline (PAni) as the matrix and iron oxide nanoparticles (IONPs) as the filler through an in situ polymerization technique. Here, the matrix biopolymer, collagen, was extracted from trimmed wastes of animal hides generated from the leather industry. The as-synthesized C/PAni/IONP hybrid biocomposite powder possesses excellent electrical conductivity, thermal stability, and saturation magnetization, thereby providing scope for a wide range of applications. We show that the bifunctional composite has an ability to conduct electrons using a light emitting diode and battery setup, degrade dye under sunlight owing to its inherent photocatalytic activity, and absorb oil from oil-water mixtures with easier collection under magnetic tracking. We also demonstrate that the composite has remarkable electromagnetic interference shielding in the X-band frequency range. The results suggest that biowastes can be converted into useful high-value hybrid materials for applications in catalysis, biological, electronic, and environmental fields, thereby presenting a scalable and sustainable approach.

Anti-Metastatic and Anti-Angiogenic Activities of Core-Shell SiO2@LDH Loaded with Etoposide in Non-Small Cell Lung Cancer

Currently, nanoparticles have gained a great attention in the anti-tumor research area. However, to date, studies on the anti-metastasis action of core-shell SiO2@LDH (LDH: layered double hydroxide) nanoparticles remain untouched. Two emerging aspects considered are establishing research on the controlling delivery effect of SiO2@LDH combined with anti-cancer medicine from a new perspective. The fine properties synthetic SiO2@LDH-VP16 (VP16: etoposide) are practiced to exhibit the nanoparticle's suppression on migration and invasion of non-small cell lung cancer (NSCLC). Both in vitro and in vivo inspection shows that SiO2@LDH can help VP16 better function as an anti-metastasis agent. On the other hand, anti-angiogenic efficiency, co-localization, as well as western blot are investigated to explain the possible mechanism. A clear mergence of SiO2@LDH-VP16 and cytomembrane/microtubule may be observed from co-location images. Results offer evidence that SiO2@LDH-VP16 plays positions on cytomembrane and microtubules. It efficiently inhibits metastasis on NSCLC by reducing vascularization, and eliciting depression of the PI3K-AKT and FAK-Paxillin signaling pathways. SiO2@LDH-VP16, the overall particle morphology, and function on anti-metastasis and anti-angiogenic may be tuned to give new opportunities for novel strategies for cancer therapy.

New Supercapacitors Based on the Synergetic Redox Effect between Electrode and Electrolyte

Redox electrolytes can provide significant enhancement of capacitance for supercapacitors. However, more important promotion comes from the synergetic effect and matching between the electrode and electrolyte. Herein, we report a novel electrochemical system consisted of a polyanilline/carbon nanotube composite redox electrode and a hydroquinone (HQ) redox electrolyte, which exhibits a specific capacitance of 7926 F/g in a three-electrode system when the concentration of HQ in H₂SO₄ aqueous electrolyte is 2 mol/L, and the maximum energy density of 114 Wh/kg in two-electrode symmetric configuration. Moreover, the specific capacitance retention of 96% after 1000 galvanostatic charge/discharge cycles proves an excellent cyclic stability. These ultrahigh performances of the supercapacitor are attributed to the synergistic effect both in redox polyanilline-based electrolyte and the redox hydroquinone electrode.