Proposing an Intelligent Dual-Energy Radiation-Based System for Metering Scale Layer Thickness in Oil Pipelines Containing an Annular Regime of Three-Phase Flow

Mutual Coupling Reduction in Antenna Arrays Using Artificial Intelligence Approach and Inverse Neural Network Surrogates

This paper presents a novel approach to reducing undesirable coupling in antenna arrays using custom-designed resonators and inverse surrogate modeling. To illustrate the concept, two standard patch antenna cells with 0.07λ edge-to-edge distance were designed and fabricated to operate at 2.45 GHz. A stepped-impedance resonator was applied between the antennas to suppress their mutual coupling. For the first time, the optimum values of the resonator geometry parameters were obtained using the proposed inverse artificial neural network (ANN) model, constructed from the sampled EM-simulation data of the system, and trained using the particle swarm optimization (PSO) algorithm. The inverse ANN surrogate directly yields the optimum resonator dimensions based on the target values of its S-parameters being the input parameters of the model. The involvement of surrogate modeling also contributes to the acceleration of the design process, as the array does not need to undergo direct EM-driven optimization. The obtained results indicate a remarkable cancellation of the surface currents between two antennas at their operating frequency, which translates into isolation as high as -46.2 dB at 2.45 GHz, corresponding to over 37 dB improvement as compared to the conventional setup.

Increasing the Accuracy and Optimizing the Structure of the Scale Thickness Detection System by Extracting the Optimal Characteristics Using Wavelet Transform

Loss of energy, decrement of efficiency, and decrement of the effective diameter of the oil pipe are among the consequences of scale inside oil condensate transfer pipes. To prevent these incidents and their consequences and take timely action, it is important to detect the amount of scale. One of the accurate diagnosis methods is the use of non-invasive systems based on gamma-ray attenuation. The detection method proposed in this research consists of a detector that receives the radiation sent by the gamma source with dual energy (radioisotopes 241Am and 133Ba) after passing through the test pipe with inner scale (in different thicknesses). This structure was simulated by Monte Carlo N Particle code. The simulation performed in the test pipe included a three-phase flow consisting of water, gas, and oil in a stratified flow regime in different volume percentages. The signals received by the detector were processed by wavelet transform, which provided sufficient inputs to design the radial basis function (RBF) neural network. The scale thickness value deposited in the pipe can be predicted with an MSE of 0.02. The use of a detector optimizes the structure, and its high accuracy guarantees the usefulness of its use in practical situations.

Application of Artificial Intelligence for Determining the Volume Percentages of a Stratified Regime’s Three-Phase Flow, Independent of the Oil Pipeline’s Scale Thickness

As time passes, scale builds up inside the pipelines that deliver the oil or gas product from the source to processing plants or storage tanks, reducing the inside diameter and ultimately wasting energy and reducing efficiency. A non-invasive system based on gamma-ray attenuation is one of the most accurate diagnostic methods to detect volumetric percentages in different conditions. A system including two NaI detectors and dual-energy gamma sources (241Am and 133Ba radioisotopes) is the recommended requirement for modeling a volume-percentage detection system using Monte Carlo N particle (MCNP) simulations. Oil, water, and gas form a three-phase flow in a stratified-flow regime in different volume percentages, which flows inside a scaled pipe with different thicknesses. Gamma rays are emitted from one side, and photons are absorbed from the other side of the pipe by two scintillator detectors, and finally, three features with the names of the count under Photopeaks 241Am and 133Ba of the first detector and the total count of the second detector were obtained. By designing two MLP neural networks with said inputs, the volumetric percentages can be predicted with an RMSE of less than 1.48 independent of scale thickness. This low error value guarantees the effectiveness of the intended method and the usefulness of using this approach in the petroleum and petrochemical industries.

Enhanced Gamma-Ray Attenuation-Based Detection System Using an Artificial Neural Network

Scale deposition is the accumulation of various materials in the walls of transmission lines and unwanted parts in the oil and gas production system. It is a leading moot point in all transmission lines, tanks, and petroleum equipment. Scale deposition leads to drastic detrimental problems, reduced permeability, pressure and production losses, and direct financial losses due to the failure of some equipment. The accumulation of oil and gas leads to clogged pores and obstruction of fluid flow. Considering the passage of a two-phase flow, our study determines the thickness of the scale, and the flow regime is detected with the help of two Multilayer Perceptron (MLP) networks. First, the diagnostic system consisting of a dual-energy source, a steel pipe, and a NaI detector was implemented, using the Monte Carlo N Particle Code (MCNP). Subsequently, the received signals were processed, and properties were extracted using the wavelet transform technique. These features were considered as inputs of an Artificial Neural Network (ANN) model used to determine the type of flow regimes and predict the scale thickness. By accurately classifying the flow regimes and determining the scale inside the pipe, our proposed method provides a platform that could enhance many areas of the oil industry.

Application of Wavelet Feature Extraction and Artificial Neural Networks for Improving the Performance of Gas-Liquid Two-Phase Flow Meters Used in Oil and Petrochemical Industries

Measuring fluid characteristics is of high importance in various industries such as the polymer, petroleum, and petrochemical industries, etc. Flow regime classification and void fraction measurement are essential for predicting the performance of many systems. The efficiency of multiphase flow meters strongly depends on the flow parameters. In this study, MCNP (Monte Carlo N-Particle) code was employed to simulate annular, stratified, and homogeneous regimes. In this approach, two detectors (NaI) were utilized to detect the emitted photons from a cesium-137 source. The registered signals of both detectors were decomposed using a discrete wavelet transform (DWT). Following this, the low-frequency (approximation) and high-frequency (detail) components of the signals were calculated. Finally, various features of the approximation signals were extracted, using the average value, kurtosis, standard deviation (STD), and root mean square (RMS). The extracted features were thoroughly analyzed to find those features which could classify the flow regimes and be utilized as the inputs to a network for improving the efficiency of flow meters. Two different networks were implemented for flow regime classification and void fraction prediction. In the current study, using the wavelet transform and feature extraction approach, the considered flow regimes were classified correctly, and the void fraction percentages were calculated with a mean relative error (MRE) of 0.4%. Although the system presented in this study is proposed for measuring the characteristics of petroleum fluids, it can be easily used for other types of fluids such as polymeric fluids.