Potential Biomedical Applications of Collagen Filaments derived from the Marine Demosponges Ircinia oros (Schmidt, 1864) and Sarcotragus foetidus (Schmidt, 1862)

Characterization of Collagen from Jellyfish Aurelia aurita and Investigation of Biomaterials Potentials

Marine collagen sources are potent alternatives due to abundant yield, low pathogen infection risk, high biocompatibility, and any religious and ethical restrictions compared to terrestrial collagen sources. In this research, we aim to investigate the biomaterials potential of the collagen from Aurelia aurita, which is a native jellyfish species in the Marmara Sea. Spectroscopic techniques were used to investigate the structure of jellyfish collagen (JCol) from acid-soluble fraction and compared to Jellagen® from Rhizostoma pulmo. MALDI-TOF showed the main peak of Jellagen® at 276,765.161 Da and jellyfish collagen at 276,761.687 Da. SDS-PAGE indicated α1 and α2 bands at about 122 kDa and 140 kDa, respectively. In FTIR and Raman spectra, the locations of amide bands of both species were almost the same. The pI of JCol was determined as 4.46. The particle size decreased abruptly at 43 oC from 890 to 290 nm. Water, organic and inorganic ratios of collagen were determined at 7.14%, 63.59, and 29.27 respectively. In DSC, the denaturation temperature (Td) of JCol was found at 43.7 oC and found to be higher than that of the collagens from jellyfishes that have been reported so far in the literature. Biocompatibility testing by metabolic assay revealed significantly higher fibroblast proliferation on collagen film than on the Tissue Culture Plate. To conclude, Aurelia aurita collagen would be a suitable source of collagen when biomaterials are needed to have high biocompatibility and unique macromolecular properties such as high denaturation temperatures.

Current and Expected Trends for the Marine Chitin/Chitosan and Collagen Value Chains

Chitin/chitosan and collagen are two of the most important bioactive compounds, with applications in the pharmaceutical, veterinary, nutraceutical, cosmetic, biomaterials, and other industries. When extracted from non-edible parts of fish and shellfish, by-catches, and invasive species, their use contributes to a more sustainable and circular economy. The present article reviews the scientific knowledge and publication trends along the marine chitin/chitosan and collagen value chains and assesses how researchers, industry players, and end-users can bridge the gap between scientific understanding and industrial applications. Overall, research on chitin/chitosan remains focused on the compound itself rather than its market applications. Still, chitin/chitosan use is expected to increase in food and biomedical applications, while that of collagen is expected to increase in biomedical, cosmetic, pharmaceutical, and nutritional applications. Sustainable practices, such as the reuse of waste materials, contribute to strengthen both value chains; the identified weaknesses include the lack of studies considering market trends, social sustainability, and profitability, as well as insufficient examination of intellectual property rights. Government regulations, market demand, consumer preferences, technological advancements, environmental challenges, and legal frameworks play significant roles in shaping both value chains. Addressing these factors is crucial for seizing opportunities, fostering sustainability, complying with regulations, and maintaining competitiveness in these constantly evolving value chains.

2D Collagen Membranes from Marine Demosponge Chondrosia reniformis (Nardo, 1847) for Skin-Regenerative Medicine Applications: An In Vitro Evaluation

Research in tissue engineering and regenerative medicine has an ever-increasing need for innovative biomaterials suitable for the production of wound-dressing devices and artificial skin-like substitutes. Marine collagen is one of the most promising biomaterials for the production of such devices. In this study, for the first time, 2D collagen membranes (2D-CMs) created from the extracellular matrix extract of the marine demosponge Chondrosia reniformis have been evaluated in vitro as possible tools for wound healing. Fibrillar collagen was extracted from a pool of fresh animals and used for the creation of 2D-CMs, in which permeability to water, proteins, and bacteria, and cellular response in the L929 fibroblast cell line were evaluated. The biodegradability of the 2D-CMs was also assessed by following their degradation in PBS and collagenase solutions for up to 21 days. Results showed that C. reniformis-derived membranes avoided liquid and protein loss in the regeneration region and also functioned as a strong barrier against bacteria infiltration into a wound. Gene expression analyses on fibroblasts stated that their interaction with 2D-CMs is able to improve fibronectin production without interfering with the regular extracellular matrix remodeling processes. These findings, combined with the high extraction yield of fibrillar collagen obtained from C. reniformis with a solvent-free approach, underline how important further studies on the aquaculture of this sponge could be for the sustainable production and biotechnological exploitation of this potentially promising and peculiar biopolymer of marine origin.

Seasonal Molecular Difference in Fibrillar Collagen Extracts Derived from the Marine Sponge Chondrosia reniformis (Nardo, 1847) and Their Impact on Its Derived Biomaterials

Chondrosia reniformis (Nardo, 1847) is a marine sponge of high biotechnological interest both for its natural compound content and for its peculiar collagen, which is suitable for the production of innovative biomaterials in the form, for instance, of 2D membranes and hydrogels, exploitable in the fields of tissue engineering and regenerative medicine. In this study, the molecular and chemical-physical properties of fibrillar collagen extracted from specimens collected in different seasons are studied to evaluate the possible impact of sea temperature on them. Collagen fibrils were extracted from sponges harvested by the Sdot Yam coast (Israel) during winter (sea temperature: 17 °C) and during summer (sea temperature: 27 °C). The total AA composition of the two different collagens was evaluated, together with their thermal stability and glycosylation level. The results showed a lower lysyl-hydroxylation level, lower thermal stability, and lower protein glycosylation level in fibrils extracted from 17 °C animals compared to those from 27 °C animals, while no differences were noticed in the GAGs content. Membranes obtained with fibrils deriving from 17 °C samples showed a higher stiffness if compared to the 27 °C ones. The lower mechanical properties shown by 27 °C fibrils are suggestive of some unknown molecular changes in collagen fibrils, perhaps related to the creeping behavior of C. reniformis during summer. Overall, the differences in collagen properties gain relevance as they can guide the intended use of the biomaterial.

Suitability of Marine- and Porcine-Derived Collagen Type I Hydrogels for Bioprinting and Tissue Engineering Scaffolds

Collagens from a wide array of animals have been explored for use in tissue engineering in an effort to replicate the native extracellular environment of the body. Marine-derived biomaterials offer promise over their conventional mammalian counterparts due to lower risk of disease transfer as well as being compatible with more religious and ethical groups within society. Here, collagen type I derived from a marine source (Macruronus novaezelandiae, Blue Grenadier) is compared with the more established porcine collagen type I and its potential in tissue engineering examined. Both collagens were methacrylated, to allow for UV crosslinking during extrusion 3D printing. The materials were shown to be highly cytocompatible with L929 fibroblasts. The mechanical properties of the marine-derived collagen were generally lower than those of the porcine-derived collagen; however, the Young’s modulus for both collagens was shown to be tunable over a wide range. The marine-derived collagen was seen to be a potential biomaterial in tissue engineering; however, this may be limited due to its lower thermal stability at which point it degrades to gelatin.

Marine Demospongiae: A Challenging Treasure of Bioactive Compounds

In the last decades, it has been demonstrated that marine organisms are a substantial source of bioactive compounds with possible biotechnological applications. Marine sponges, in particular those belonging to the class of Demospongiae, have been considered among the most interesting invertebrates for their biotechnological potential. In this review, particular attention is devoted to natural compounds/extracts isolated from Demospongiae and their associated microorganisms with important biological activities for pharmacological applications such as antiviral, anticancer, antifouling, antimicrobial, antiplasmodial, antifungal and antioxidant. The data here presented show that this class of sponges is an exciting source of compounds, which are worth developing into new drugs, such as avarol, a hydroquinone isolated from the marine sponge Disidea avara, which is used as an antitumor, antimicrobial and antiviral drug.

Protein-Based Hydrogels: Promising Materials for Tissue Engineering

The successful design of a hydrogel for tissue engineering requires a profound understanding of its constituents' structural and molecular properties, as well as the proper selection of components. If the engineered processes are in line with the procedures that natural materials undergo to achieve the best network structure necessary for the formation of the hydrogel with desired properties, the failure rate of tissue engineering projects will be significantly reduced. In this review, we examine the behavior of proteins as an essential and effective component of hydrogels, and describe the factors that can enhance the protein-based hydrogels' structure. Furthermore, we outline the fabrication route of protein-based hydrogels from protein microstructure and the selection of appropriate materials according to recent research to growth factors, crucial members of the protein family, and their delivery approaches. Finally, the unmet needs and current challenges in developing the ideal biomaterials for protein-based hydrogels are discussed, and emerging strategies in this area are highlighted.

Ultrastructural and Physicochemical Characterization of a Non-Crosslinked Type 1 Bovine Derived Collagen Membrane

In this work, in vitro testing was used to study the properties of non-crosslinked type 1 bovine derived collagen membranes used in bone regeneration surgery. Collagen membranes were prepared, their surface roughness was quantified by interferometry, their morphology was observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM), their wettability was measured by the contact angle technique, their mechanical properties were investigated by tensile testing, their phase transformation temperatures were measured by Differential Scanning Calorimetry (DSC), and their biocompatibility was evaluated by immunological testing. The calorimetry tests showed that the membrane is formed only by type 1 collagen. The SEM observations showed that the morphology consists of layers of highly organized collagen fibers and patterns of striated fibrils typical of type 1 collagen. The small contact angle showed that the membrane is hydrophilic, with the possibility of rapid absorption of body fluids. The tensile tests showed that the membrane has enough elasticity, ductility, and mechanical strength for use in tissue regeneration. With the immunostaining technique, it was possible to confirm the membrane biocompatibility.