A Review on the Use of Membrane Technology Systems in Developing Countries

Ultrafiltration membrane based on chitosan/adipic acid: Synthesis, characterization and performance on separation of methylene blue and reactive yellow-145 from aqueous phase

Here, we report for the first time using of the nontoxic chitosan/adipic acid cross-linked membrane CS/AA in the separation of methylene blue and reactive yellow-145 from aqueous phase. The reason we chose adipic acid as a cross-linking agent is because it gives the cross-linked membrane moderate flexibility due to the presence of four methylene groups in its structure. The structure of the cross-linked membrane CS/AA and their properties were confirmed through, FTIR, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), atomic force microscopy (AFM), and BET analysis. The thermal properties of membrane indicated an improvement in its flexibility and hydrophobicity, but this improvement was accompanied by a decrease in its thermal stability. pHpzc value and porosity of the CS/AA were 7.88, and 73.95 % respectively. The average pore radius distribution ranged from 2 to 27 nm. The prepared cross-linked membrane provides spontaneous and continuous purification of water with a high efficiency. This is due to the membrane CS/AA ability to separate methylene blue and reactive yellow-145 from the aqueous phase almost completely. The results revealed that the removal efficiency and permeation flux for MB were 100 % and 1 L/m2.h respectively at initial dye concentration of (4,8) mg/L, at 1 bar, and the removal efficiency and permeation flux for RY-145 were (94,96) % and (1.06, 2.09) L/m2.h respectively at 100 mg/L and at (1,1.5) bar. Such cross-linked nanopore polymer membranes provide a new approach for emerging novel purification systems, principally in the field of environmental field.

Graphene-Based Composite for Carbon Capture

The current energy system is based largely on fossil fuels that emit carbon dioxide (CO2) and contribute to global climate change. Global energy demand is expected to increase, with growth approximately doubled by the year 2050 and tripled by the end of the century. Therefore, research and development on emissions management and carbon cycle solutions that meet energy sustainability is critical to reduce the effects of global warming. The key point of this literature review is the selection of suitable materials for carbon capture. The selection is based on the consideration that the CO2 reduction properties are influenced by the type of material/composite that is being used, the preparation, and the possible characterization method. This Review covers graphene-based materials and their composites as appropriate materials for reducing CO2 and their performance assessment through experiments and theoretical analysis. It is very important to improve the efficiency performance of materials and its scalability. Recently, graphene has become a widely used material for environmental applications, one of which shows good performance in reducing CO2 concentration. To separate CO2, graphene has been developed and is now being showcased and reviewed in this study. Given the measuring technique used, this Review is intended to be a valuable resource for individuals researching CO2 separation employing graphene material in combination with other materials.

Innovative porous mortar filters: wastewater purification for clean water

Water scarcity is a major global challenge that affects both developed and developing countries, with Indonesia serving as a prime example. Indonesia's archipelagic nature, combined with its dense population, exacerbates the severity of water scarcity. The increased population density in these areas raises the demand for water resources, putting a strain on the available supply. The purpose of this research was to create porous mortar filters (PMFs) with different ratios (1:4, 1:5, and 1:6) by incorporating 10, 15, and 20% adsorbent material by weight of fine aggregate. The research was carried out in three stages: determining PMF properties, preparing synthetic wastewater, and assessing treatment effectiveness. Various PMF compositions consistently achieved notable success, with reductions in total dissolved solids and turbidity exceeding 25 and 75%, respectively. The PMF performed admirably in eliminating bacterial concentrations, achieving a 100% removal rate, and was critical in efficiently reducing metals, with compositions achieving over 80% reduction for manganese (Mn) and 38% reduction for iron (Fe). PMF emerges as a practical solution as a cost-effective and simple water treatment technology, particularly suitable for areas with limited technological infrastructure and resources, providing accessible water treatment for communities facing challenges in this regard.

The analytic hierarchy process method to design applicable decision making for the effective removal of 2-MIB and geosmin in water sources

Numerous utilities encounter issues with taste and odor that alter the public's impression of the safety of drinking water. The creation of certain components in water naturally due to global climate change is another source of taste and odor components, in addition to industrial emissions. Geosmin and 2-methylisoborneol (2-MIB), both of which are generated by blue-green algae and actinomycetes, are two substances that contribute to the musty and earthy smells in drinking water sources. Unfortunately, current conventional treatment plants only partially remove 2-MIB and geosmin. Therefore, to protect the environment and public health, more up-to-date or optimized treatment methods should be applied to outdated treatment facilities. Best treatment practices, evaluation standards, and decision-making approaches, however, are still shrouded in mystery. The goal of this study was to identify the most effective treatment options for 2-MIB and geosmin. By using the analytical hierarchy process (AHP), a total of 22 assessment criteria were found and prioritized. A thorough literature search led to the identification of potential treatment options, and their effectiveness was evaluated. These options and priority rankings were decided upon using AHP in the decision-making process. Advanced oxidation techniques came out on top in the final priority ranking, followed by membrane filtering, adsorption, oxidation, hybrid processes, and traditional treatment methods. The applied analytical decision techniques may also be used to choose the optimal treatment options, even though the results are particular to 2-MIB and geosmin.

A review of stimuli-responsive polymer-based gating membranes

The formation and properties of smart (stimuli-responsive) membranes are reviewed, with a special focus on temperature and pH triggering of gating to water, ions, polymers, nanoparticles, or other molecules of interest. The review is organized in two parts, starting with all-smart membranes based on intrinsically smart materials, in particular of the poly(N-isopropylacrylamide) family and similar polymers. The key steps of membrane fabrication are discussed, namely the deposition into thin films, functionalization of pores, and the secondary crosslinking of pre-existing microgel particles into membranes. The latter may be free-standing and do not necessitate the presence of a porous support layer. The temperature-dependent swelling properties of polymers provide a means of controlling the size of pores, and thus size-sensitive gating. Throughout the review, we highlight "positive" (gates open) or "negative" (closed) gating effects with respect to increasing temperature. In the second part, the functionalization of porous organic or inorganic membranes of various origins by either microgel particles or linear polymer brushes is discussed. In this case, the key steps are the adsorption or grafting mechanisms. Finally, whenever provided by the authors, the suitability of smart gating membranes for specific applications is highlighted.

Safeguarding drinking water: A brief insight on characteristics, treatments and risk assessment of contamination

Water pollution stands as a critical worldwide concern, bearing extensive repercussions that extend to human health and the natural ecosystem. The sources of water pollution can be diverse, arising from natural processes and human activities and the pollutants may range from chemical and biological agents to physical and radiological contaminants. The contamination of water disrupts the natural functioning of the system, leading to both immediate and prolonged health problems. Various technologies and procedures, ranging from conventional to advanced, have been developed to eliminate water impurities, with the choice depending on the type and level of contamination. Assessing risks is a crucial element in guaranteeing the safety of drinking water. Till now, research is continuing the removal of contaminates for the sake of supplying safe drinking water. The study examined physical, inorganic, organic, biological and radiological contaminants in drinking water. It looked at where these contaminants come from, their characteristics, the impact they have and successful methods used in real-world situations to clean the contaminated water. Risk assessment methodologies associated with the use of unsafe drinking water as future directives are also taken into consideration in the present study for the benefit of public concern. The manuscript introduces a comprehensive study on water pollution, focusing on assessing and mitigating risks associated with physical, inorganic, organic, biological and radiological contaminants in drinking water, with a novel emphasis on future directives and sustainable solutions for public safety.

Nanoparticles and nanofiltration for wastewater treatment: From polluted to fresh water

Water pollution poses significant threats to both ecosystems and human health. Mitigating this issue requires effective treatment of domestic wastewater to convert waste into bio-fertilizers and gas. Neglecting liquid waste treatment carries severe consequences for health and the environment. This review focuses on intelligent technologies for water and wastewater treatment, targeting waterborne diseases. It covers pollution prevention and purification methods, including hydrotherapy, membrane filtration, mechanical filters, reverse osmosis, ion exchange, and copper-zinc cleaning. The article also highlights domestic purification, field techniques, heavy metal removal, and emerging technologies like nanochips, graphene, nanofiltration, atmospheric water generation, and wastewater treatment plants (WWTPs)-based cleaning. Emphasizing water cleaning's significance for ecosystem protection and human health, the review discusses pollution challenges and explores the integration of wastewater treatment, coagulant processes, and nanoparticle utilization in management. It advocates collaborative efforts and innovative research for freshwater preservation and pollution mitigation. Innovative biological systems, combined with filtration, disinfection, and membranes, can elevate recovery rates by up to 90%, surpassing individual primary (<10%) or biological methods (≤50%). Advanced treatment methods can achieve up to 95% water recovery, exceeding UN goals for clean water and sanitation (Goal 6). This progress aligns with climate action objectives and safeguards vital water-rich habitats (Goal 13). The future holds promise with advanced purification techniques enhancing water quality and availability, underscoring the need for responsible water conservation and management for a sustainable future.

Micro/nanorobots for remediation of water resources and aquatic life

Nowadays, global water scarcity is becoming a pressing issue, and the discharge of various pollutants leads to the biological pollution of water bodies, which further leads to the poisoning of living organisms. Consequently, traditional water treatment methods are proving inadequate in addressing the growing demands of various industries. As an effective and eco-friendly water treatment method, micro/nanorobots is making significant advancements. Based on researches conducted between 2019 and 2023 in the field of water pollution using micro/nanorobots, this paper comprehensively reviews the development of micro/nanorobots in water pollution control from multiple perspectives, including propulsion methods, decontamination mechanisms, experimental techniques, and water monitoring. Furthermore, this paper highlights current challenges and provides insights into the future development of the industry, providing guidance on biological water pollution control.

Effect of a Permanganate-Bearing Reactive Oxidant on Flocs in Electrocoagulation: Transformations and Interfacial Interactions

The electrocoagulation/ultrafiltration (ECUF) process is expected to address the issues of current wastewater increments and complex water reuse. However, the underlying mechanism associated with flocs remains unclear in the ECUF system, especially in the upgraded permanganate-bearing ECUF (PECUF) system. Herein, flocs and their formation, response to organic matter (OM), and interfacial features in the PECUF process were systematically explored. Results demonstrated that permanganate contributed to the rapid start-up of the coagulation process by forming MnO₂ and blocking the ligand-metal charge transfer process between adsorbed Fe(II) and solid-phase Fe(III). The response of flocs to natural OM (NOM) exhibited obvious time- and particle size-dependent characteristics. Based on this, the optimal NOM adsorption window was found to be in the interval of 5-20 min, whereas the optimal NOM removal window was located at the 20-30 min interval. Furthermore, the extended Derjaguin-Landau-Verwey-Overbeek theory revealed the underlying principle of the PECUF module for optimizing UF performance. On the one hand, it reduced the inherent resistance of the cake layer by modifying the colloidal solution, which guaranteed a small drop (15%) in initial flux. On the other hand, it enhanced the repulsive force among suspended particles to achieve a long-term antifouling effect. This study may provide insights into the selection and performance control of on-demand assembly modules in decentralized water treatment systems.

A Review of Pectin-Based Material for Applications in Water Treatment

Climate change and water are inseparably connected. Extreme weather events cause water to become more scarce, polluted, and erratic than ever. Therefore, we urgently need to develop solutions to reduce water contamination. This review intends to demonstrate that pectin-based materials are an excellent route to detect and mitigate pollutants from water, with several benefits. Pectin is a biodegradable polymer, extractable from vegetables, and contains several hydroxyl and carboxyl groups that can easily interact with the contaminant ions. In addition, pectin-based materials can be prepared in different forms (films, hydrogels, or beads) and cross-linked with several agents to change their molecular structure. Consequently, the pectin-based adsorbents can be tuned to remove diverse pollutants. Here, we will summarize the existing water remediation technologies highlighting adsorption as the ideal method. Then, the focus will be on the chemical structure of pectin and, from a historical perspective, on its structure after applying different cross-linking methods. Finally, we will review the application of pectin as an adsorbent of water pollutants considering the pectin of low degree methoxylation.

Multifunctional Heterogeneous Ion-Exchange Membranes for Ion and Microbe Removal in Low-Salinity Water

Here, multifunctional heterogeneous ion-exchange metal nanocomposite membranes were prepared for surface water desalination and bacterial inactivation under low-pressure (0.05 MPa) filtration conditions. Ultrafiltration (UF) heterogeneous ion exchange membranes (IEMs) were modified with different concentrations of AgNO₃ and CuSO₄ solutions using the intermatrix synthesis (IMS) technique to produce metal nanocomposite membranes. Scanning electron microscopy (SEM) images revealed that the metal nanoparticles (MNPs) (Ag and Cu) were uniformly distributed on the surface and the interior of the nanocomposite membranes. With increasing metal precursor solution concentration (0.01 to 0.05 mol·L^-1), the metal content of Ag and Cu nanocomposite membranes increased from 0.020 to 0.084 mg·cm^-2 and from 0.031 to 0.218 m·cm^-2 respectively. Results showed that the hydrodynamic diameter diameters of Ag and Cu nanoparticles (NPs) increased from 62.42 to 121.10 nm and from 54.2 to 125.7 nm respectively, as the metal precursor concentration loaded increased. The leaching of metals from metal nanocomposite membranes was measured in a dead-end filtration system, and the highest leaching concentration levels were 8.72 ppb and 5.32 ppb for Ag and Cu, respectively. The salt rejection studies indicated that ionic selectivity was improved with increasing metal content. Bacterial filtration showed higher antibacterial activity for metal nanocomposite membranes, reaching 3.6 log bacterial inactivation.

A Simple and Efficient Solar Interfacial Evaporation Device Based on Carbonized Cattail and Agarose Hydrogel for Water Evaporation and Purification

One of the main trends in the development of solar interface evaporation technology is the simple, efficient, and environmentally friendly bio-based evaporation device. However, the development of bio-based evaporators with high water evaporation rates and good pollution removal capability is a significant challenge. Here, we present a carbonized cattail-agarose hydrogel (CCAH) membrane with numerous microchannels resembling bamboo knots, exceptional hydrophilicity, outstanding light absorption capability, and potent adsorption. Under one solar irradiation, its evaporation rate and efficiency reached 1.93 kg m^-2 h^-1 and 95.8%, respectively. More importantly, the CCAH membrane produces steam water that is almost totally free of salts (Na⁺, K⁺, Mg²⁺, and Ca²⁺), heavy metal ions (Pb²⁺, Cd²⁺, and Cr²⁺), and organic dyes (Rhodamine B, methylene blue, and methyl orange). The CCAH membrane is highly promising for the use of saltwater desalination and wastewater recovery to help people in impoverished areas with water scarcity problems.

Natural Fiber-Reinforced Thermoplastic ENR/PVC Composites as Potential Membrane Technology in Industrial Wastewater Treatment: A Review

Membrane separation processes are prevalent in industrial wastewater treatment because they are more effective than conventional methods at addressing global water issues. Consequently, the ideal membranes with high mechanical strength, thermal characteristics, flux, permeability, porosity, and solute removal capacity must be prepared to aid in the separation process for wastewater treatment. Rubber-based membranes have shown the potential for high mechanical properties in water separation processes to date. In addition, the excellent sustainable practice of natural fibers has attracted great attention from industrial players and researchers for the exploitation of polymer composite membranes to improve the balance between the environment and social and economic concerns. The incorporation of natural fiber in thermoplastic elastomer (TPE) as filler and pore former agent enhances the mechanical properties, and high separation efficiency characteristics of membrane composites are discussed. Furthermore, recent advancements in the fabrication technique of porous membranes affected the membrane's structure, and the performance of wastewater treatment applications is reviewed.

Progress and Prospects of Nanocellulose-Based Membranes for Desalination and Water Treatment

Membrane-based desalination has proved to be the best solution for solving the water shortage issues globally. Membranes are extremely beneficial in the effective recovery of clean water from contaminated water sources, however, the durability as well as the separation efficiency of the membranes are restricted by the type of membrane materials/additives used in the preparation processes. Nanocellulose is one of the most promising green materials for nanocomposite preparation due to its biodegradability, renewability, abundance, easy modification, and exceptional mechanical properties. This nanocellulose has been used in membrane development for desalination application in the recent past. The study discusses the application of membranes based on different nanocellulose forms such as cellulose nanocrystals, cellulose nanofibrils, and bacterial nanocellulose for water desalination applications such as nanofiltration, reverse osmosis, pervaporation, forward osmosis, and membrane distillation. From the analysis of studies, it was confirmed that the nanocellulose-based membranes are effective in the desalination application. The chemical modification of nanocellulose can definitely improve the surface affinity as well as the reactivity of membranes for the efficient separation of specific contaminants/ions.