Dual-Phase Mixed Protonic-Electronic Conducting Hydrogen Separation Membranes: A Review

Design of Mixed Ionic-Electronic Materials for Permselective Membranes and Solid Oxide Fuel Cells Based on Their Oxygen and Hydrogen Mobility

Oxygen and hydrogen mobility are among the important characteristics for the operation of solid oxide fuel cells, permselective membranes and many other electrochemical devices. This, along with other characteristics, enables a high-power density in solid oxide fuel cells due to reducing the electrolyte resistance and enabling the electrode processes to not be limited by the electrode-electrolyte-gas phase triple-phase boundary, as well as providing high oxygen or hydrogen permeation fluxes for membranes due to a high ambipolar conductivity. This work focuses on the oxygen and hydrogen diffusion of mixed ionic (oxide ionic or/and protonic)-electronic conducting materials for these devices, and its role in their performance. The main laws of bulk diffusion and surface exchange are highlighted. Isotope exchange techniques allow us to study these processes in detail. Ionic transport properties of conventional and state-of-the-art materials including perovskites, Ruddlesden-Popper phases, fluorites, pyrochlores, composites, etc., are reviewed.

Synthesis and Oxygen Mobility of Bismuth Cerates and Titanates with Pyrochlore Structure

Synthesis and study of materials based on bismuth cerates and titanates were carried out. Complex oxides Bi_1.6Y_0.4Ti₂O₇ were synthesized by the citrate route; Bi₂Ce₂O₇ and Bi_1.6Y_0.4Ce₂O₇-by the Pechini method. The structural characteristics of materials after conventional sintering at 500-1300 °C were studied. It is demonstrated that the formation of a pure pyrochlore phase, Bi_1.6Y_0.4Ti₂O₇, occurs after high-temperature calcination. Complex oxides Bi₂Ce₂O₇ and Bi_1.6Y_0.4Ce₂O₇ have a pyrochlore structure formed at low temperatures. Yttrium doping of bismuth cerate lowers the formation temperature of the pyrochlore phase. As a result of calcination at high temperatures, the pyrochlore phase transforms into the CeO₂-like fluorite phase enriched by bismuth oxide. The influence of radiation-thermal sintering (RTS) conditions using e-beams was studied as well. In this case, dense ceramics are formed even at sufficiently low temperatures and short processing times. The transport characteristics of the obtained materials were studied. It has been shown that bismuth cerates have high oxygen conductivity. Conclusions are drawn about the oxygen diffusion mechanism for these systems. The materials studied are promising for use as oxygen-conducting layers in composite membranes.

Design and Validation of an Experimental Setup for Evaluation of Gas Permeation in Ceramic Membranes

An experimental setup for the evaluation of permeation of gaseous species with the possibility of simultaneously collecting electrochemical impedance spectroscopy data in disk-shaped ceramic membranes was designed and assembled. It consists of an alumina sample holder with thermocouple tips and platinum electrodes located close to both sides of the sample. Water-cooled inlet and outlet gas connections allowed for the insertion of the sample chamber into a programmable split tubular furnace. Gas permeation through a ceramic membrane can be monitored with mass flow controllers, a mass spectrometer, and an electrochemical impedance analyzer. For testing and data validation, ceramic composite membranes were prepared with the infiltration of molten eutectic compositions of alkali salts (lithium, sodium, and potassium carbonates) into porous gadolinia-doped ceria. Values of the alkali salt melting points and the permeation rates of carbon dioxide, in agreement with reported data, were successfully collected.

Structural and Transport Properties of E-Beam Sintered Lanthanide Tungstates and Tungstates-Molybdates

Lanthanide tungstates and molybdates are promising materials for hydrogen separation membranes due to their high protonic conductivity. A promising approach to fabricating ceramics based on these materials is radiation thermal sintering. The current work aims at studying the effect of radiation thermal sintering on the structural morphological and transport properties of (Nd,Ln)_5.5(W,Mo)O_11.25-δ as promising materials for hydrogen separation membranes. The defect fluorite structure was shown to be preserved during radiation thermal sintering at 1100 °C. The presence of protons in hydrated samples was confirmed by TGA. According to four-electrode studies and the isotope exchange of oxygen with C¹⁸O₂, the samples demonstrate a high proton conductivity and oxygen mobility. Residual porosity (up to 29%) observed for these samples can be dealt with during membrane preparation by adding sintering aids and/or metal alloys nanoparticles. Hence, sintering by e-beams can be applied to the manufacturing of hydrogen separation membranes based on these materials.