Correction: Filonova, E.; Pikalova, E. Overview of Approaches to Increase the Electrochemical Activity of Conventional Perovskite Air Electrodes. Materials 2023, 16, 4967

In the original publication [...].

Design of Mixed Ionic-Electronic Materials for Permselective Membranes and Solid Oxide Fuel Cells Based on Their Oxygen and Hydrogen Mobility

Oxygen and hydrogen mobility are among the important characteristics for the operation of solid oxide fuel cells, permselective membranes and many other electrochemical devices. This, along with other characteristics, enables a high-power density in solid oxide fuel cells due to reducing the electrolyte resistance and enabling the electrode processes to not be limited by the electrode-electrolyte-gas phase triple-phase boundary, as well as providing high oxygen or hydrogen permeation fluxes for membranes due to a high ambipolar conductivity. This work focuses on the oxygen and hydrogen diffusion of mixed ionic (oxide ionic or/and protonic)-electronic conducting materials for these devices, and its role in their performance. The main laws of bulk diffusion and surface exchange are highlighted. Isotope exchange techniques allow us to study these processes in detail. Ionic transport properties of conventional and state-of-the-art materials including perovskites, Ruddlesden-Popper phases, fluorites, pyrochlores, composites, etc., are reviewed.

Overview of Approaches to Increase the Electrochemical Activity of Conventional Perovskite Air Electrodes

The progressive research trends in the development of low-cost, commercially competitive solid oxide fuel cells with reduced operating temperatures are closely linked to the search for new functional materials as well as technologies to improve the properties of established materials traditionally used in high-temperature devices. Significant efforts are being made to improve air electrodes, which significantly contribute to the degradation of cell performance due to low oxygen reduction reaction kinetics at reduced temperatures. The present review summarizes the basic information on the methods to improve the electrochemical performance of conventional air electrodes with perovskite structure, such as lanthanum strontium manganite (LSM) and lanthanum strontium cobaltite ferrite (LSCF), to make them suitable for application in second generation electrochemical cells operating at medium and low temperatures. In addition, the information presented in this review may serve as a background for further implementation of developed electrode modification technologies involving novel, recently investigated electrode materials.

Performance Enhancement of Ce0.8Sm0.2O1.9-Supported SOFC by Electrophoretic Formation of Modifying BaCe0.8Sm0.2O3 and Ce0.8Sm0.1Pr0.1O1.9 Layers

The strategy to increase the performance of the single solid oxide fuel cell (SOFC) with a supporting membrane of Ce_0.8Sm_0.2O_1.9 (SDC) electrolyte has been implemented in this study by introducing a thin anode barrier layer of the BaCe_0.8Sm_0.2O₃ + 1 wt% CuO (BCS-CuO) electrolyte and, additionally, a modifying layer of a Ce_0.8Sm_0.1Pr_0.1O_1.9 (PSDC) electrolyte. The method of electrophoretic deposition (EPD) is used to form thin electrolyte layers on a dense supporting membrane. The electrical conductivity of the SDC substrate surface is achieved by the synthesis of a conductive polypyrrole sublayer. The kinetic parameters of the EPD process from the PSDC suspension are studied. The volt-ampere characteristics and power output of the obtained SOFC cells with the PSDC modifying layer on the cathode side and the BCS-CuO blocking layer on the anode side (BCS-CuO/SDC/PSDC) and with a BCS-CuO blocking layer on the anode side (BCS-CuO/SDC) and oxide electrodes have been studied. The effect of increasing the power output of the cell with the BCS-CuO/SDC/PSDC electrolyte membrane due to a decrease in the ohmic and polarization resistances of the cell is demonstrated. The approaches developed in this work can be applied to the development of SOFCs with both supporting and thin-film MIEC electrolyte membranes.

Development of La1.7Ca0.3Ni1-yCuyO4+δ Materials for Oxygen Permeation Membranes and Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells

The La_1.7Ca_0.3Ni_1-yCu_yO_4+δ (y = 0.0-0.4) nickelates, synthesized via a solid-state reaction method, are investigated as prospective materials for oxygen permeation membranes and IT-SOFC cathodes. The obtained oxides are single-phase and possess a tetragonal structure (I4/mmm sp. gr.). The unit cell parameter c and the cell volume increase with Cu-substitution. The interstitial oxygen content and total conductivity decrease with Cu-substitution. The low concentration of mobile interstitial oxygen ions results in a limited oxygen permeability of Cu-substituted La_1.7Ca_0.3NiO_4+δ ceramic membranes. However, increasing the Cu content over y = 0.2 induces two beneficial effects: enhancement of the electrochemical activity of the La_1.7Ca_0.3Ni_1-yCu_yO_4+δ (y = 0.0; 0.2; 0.4) electrodes and decreasing the sintering temperature from 1200 °C to 900 °C. Enhanced electrode activity is due to better sintering properties of the developed materials ensuring excellent adhesion and facilitating the charge transfer at the electrode/electrolyte interface and, probably, faster oxygen exchange in Cu-rich materials. The polarization resistance of the La_1.7Ca_0.3Ni_1.6Cu_0.4O_4+δ electrode on the Ce_0.8Sm_0.2O_1.9 electrolyte is as low as 0.15 Ω cm² and 1.95 Ω cm² at 850 °C and 700 °C in air, respectively. The results of the present work demonstrate that the developed La_1.7Ca_0.3Ni_0.6Cu_0.4O_4+δ-based electrode can be considered as a potential cathode for intermediate-temperature solid oxide fuel cells.

Direct Electrophoretic Deposition and Characterization of Thin-Film Membranes Based on Doped BaCeO3 and CeO2 for Anode-Supported Solid Oxide Fuel Cells

In this work, a technology was developed for the formation of BaCe0.8Sm0.2O3+1 wt% CuO (BCS-CuO)/Ce0.8Sm0.2O1.9 (SDC) thin-film electrolyte membranes for intermediate-temperature solid oxide fuel cells (IT-SOFCs) on porous NiO-BCS-CuO anode substrates using direct electrophoretic deposition (EPD). The effect of increasing the zeta potential when modifying the base suspension of a micro-sized SDC-gn powder (glycine–nitrate method) with the addition of a SDC-lec nanopowder (laser evaporation–condensation) was investigated. Dependences of the current strength on the deposition time and the deposited weight on the EPD voltage were obtained, and evolution of the morphology of the coatings during the modification of the SDC-gn suspension and a suspension of BCS-CuO powder was studied. The compatibility of the shrinkage kinetics of the SDC, the BCS-CuO electrolyte coatings and the NiO-BCS-CuO anode substrate was studied during the high-temperature sintering. Dense BCS-CuO/SDC films of different thicknesses were obtained for the first time on porous NiO-BCS-CuO anode substrates and comprehensive microstructural and electrochemical studies were carried out. The developed technology can be applied to the formation of anode-supported SOFCs with thin-film electrolyte membranes.

Opportunities, Challenges and Prospects for Electrodeposition of Thin-Film Functional Layers in Solid Oxide Fuel Cell Technology

Electrolytic deposition (ELD) and electrophoretic deposition (EPD) are relevant methods for creating functional layers of solid oxide fuel cells (SOFCs). This review discusses challenges, new findings and prospects for the implementation of these methods, with the main emphasis placed on the use of the ELD method. Topical issues concerning the formation of highly active SOFC electrodes using ELD, namely, the electrochemical introduction of metal cations into a porous electrode backbone, the formation of composite electrodes, and the electrochemical synthesis of perovskite-like electrode materials are considered. The review presents examples of the ELD formation of the composite electrodes based on porous platinum and silver, which retain high catalytic activity when used in the low-temperature range (400–650 °C). The features of the ELD/EPD co-deposition in the creation of nanostructured electrode layers comprising metal cations, ceramic nanoparticles, and carbon nanotubes, and the use of EPD to create oriented structures are also discussed. A separate subsection is devoted to the electrodeposition of CeO₂-based film structures for barrier, protective and catalytic layers using cathodic and anodic ELD, as well as to the main research directions associated with the deposition of the SOFC electrolyte layers using the EPD method.