Ionic Conductivity and Cycling Stability Improvement of PVDF/Nano-Clay Using PVP as Polymer Electrolyte Membranes for LiFePO₄ Batteries

Adsorption and antibacterial studies of a novel hydrogel adsorbent based on ternary eco-polymers doped with sulfonated graphene oxide developed from upcycled plastic waste

A novel ternary blended polymer composed of cost-effective and readily available polymers was synthesized using poly (vinyl alcohol) (PVA), iota carrageenan (IC), and poly (vinyl pyrrolidone) (PVP). Sulfonated graphene oxide (SGO), prepared from recycled drinking water bottles, was utilized as a doping agent. Varying amounts (1-3 wt%) were combined into the polymer matrix. The produced hydrogel film was examined as a potential adsorbent hydrogel film for the removal of methylene blue (MB) and Gentamicin sulfate (GMS) antibiotic from an aqueous solution. The experimental results demonstrate that the presence of SGO significantly increased the adsorption efficiency of PVA/IC/PVP hydrogel film. The antimicrobial tests revealed that the PVA/IC/PVP-3% SGO hydrogel film exhibited the most potent activity against all the tested pathogenic bacteria. However, the adsorption results for MB and GMS showed that the addition of 3 wt% SGO resulted in a removal percentage that was a two fold increase in the removal percentage compared with the undoped PVA/IC/PVP hydrogel film. Furthermore, the response surface methodology (RSM) model was utilized to examine and optimize several operating parameters, including time, pH of the solution, and initial pollutant concentration. The adsorption kinetics were better characterized by the pseudo-second-order kinetics model. The composite film containing 3 wt% SGO had a maximum adsorption capacity of 606 mg g-1 for MB and 654 mg g-1 for GMS, respectively. The generated nanocomposite hydrogel film demonstrated promising potential for application in water purification systems.

Dual Interface Compatibility Enabled via Composite Solid Electrolyte with High Transference Number for Long-Life All-Solid-State Lithium Metal Batteries

The development of solid-state electrolytes (SSEs) effectively solves the safety problem derived from dendrite growth and volume change of lithium during cycling. In the meantime, the SSEs possess non-flammability compared to conventional organic liquid electrolytes. Replacing liquid electrolytes with SSEs to assemble all-solid-state lithium metal batteries (ASSLMBs) has garnered significant attention as a promising energy storage/conversion technology for the future. Herein, a composite solid electrolyte containing two inorganic components (Li6.25Al0.25La3Zr2O12, Al2O3) and an organic polyvinylidene difluoride matrix is designed rationally. X-ray photoelectron spectroscopy and density functional theory calculation results demonstrate the synergistic effect among the components, which results in enhanced ionic conductivity, high lithium-ion transference number, extended electrochemical window, and outstanding dual interface compatibility. As a result, Li||Li symmetric battery maintains a stable cycle for over 2500 h. Moreover, all-solid-state lithium metal battery assembled with LiNi0.6Co0.2Mn0.2O2 cathode delivers a high discharge capacity of 168 mAh g-1 after 360 cycles at 0.1 C at 25 °C, and all-solid-state lithium-sulfur battery also exhibits a high initial discharge capacity of 912 mAh g-1 at 0.1 C. This work demonstrates a long-life flexible composite solid electrolyte with excellent interface compatibility, providing an innovative way for the rational construction of next-generation high-energy-density ASSLMBs.

p-Phenylenediamine-Bridged Binder-Electrolyte-Unified Supramolecules for Versatile Lithium Secondary Batteries

The binder is an essential component in determining the structural integrity and ionic conductivity of Li-ion battery electrodes. However, conventional binders are not sufficiently conductive and durable to be used with solid-state electrolytes. In this study, a novel system is proposed for a Li secondary battery that combines the electrolyte and binder into a unified structure, which is achieved by employing para-phenylenediamine (pPD) moiety to create supramolecular bridges between the parent binders. Due to a partial crosslinking effect and charge-transferring structure of pPD, the proposed strategy improves both the ionic conductivity and mechanical properties by a factor of 6.4 (achieving a conductivity of 3.73 × 10-4 S cm-1 for poly(ethylene oxide)-pPD) and 4.4 (reaching a mechanical strength of 151.4 kPa for poly(acrylic acid)-pPD) compared to those of conventional parent binders. As a result, when the supramolecules of pPD are used as a binder in a pouch cell with a lean electrolyte loading of 2 µL mAh-1 , a capacity retention of 80.2% is achieved even after 300 cycles. Furthermore, when it is utilized as a solid-state electrolyte, an average Coulombic efficiency of 99.7% and capacity retention of 98.7% are attained under operations at 50 °C without external pressure or a pre-aging process.

Application and characterization of a novel PVDF-HFP/PVP polymer composite with MoO3 nanowires as a protective coating for wood

The coatings on wood must sometimes give aesthetic and basic protection to wooden elements and prevent the development and transmission of microorganisms. Several polymers containing different nanoparticles have already been offered to day for this purpose. The research presents a novel poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)/polyvinylpyrrolidone (PVP) polymer composite with MoO₃ nanowires with the ability to form coating films on wood. The films of the developed coating exhibit elastic behaviour, which depends on the coating film thickness [tested wet film thicknesses (90, 180 and 360) µm]. The coating showed the ability to interact well with the surface of common beech (Fagus sylvatica L.) wood, in terms of wetting (contact angles of 15.6°), fast spilling on the surface, good penetration of the coating in wood structure and formation of up to 40 µm-thick films with excellent pull-off adhesion strength (6 MPa). An increased roughness of wood coated with C + MoO₃ was a consequence of wood etching by the dimethylformamide solvent present in the coating. Moreover, the presence of C + MoO₃ on wood made it considerably more hydrophobic, with contact angle of water raising to 123° from initially 46° measured on uncoated wood. The irradiation of wood surfaces with ultra-violet light resulted in visible colour changes on both uncoated and coated wood. The wood coated with C + MoO₃ has a good resistance to water, alcohol and dry heat (grade 3 to 4). The antimicrobial testing showed that the presence of MoO₃ in the coating plays an important role in the resistance of the coated wood to blue-stain fungi and mould development. The developed PVDF-HFP/PVP/MoO₃ coating has an excellent ability to interact with the wood surface and has the potential to be used as a protection for wood in sensitive environments.

Natural Clay-Based Materials for Energy Storage and Conversion Applications

Among various energy storage and conversion materials, functionalized natural clays display significant potentials as electrodes, electrolytes, separators, and nanofillers in energy storage and conversion devices. Natural clays have porous structures, tunable specific surface areas, remarkable thermal and mechanical stabilities, abundant reserves, and cost-effectiveness. In addition, natural clays deliver the advantages of high ionic conductivity and hydrophilicity, which are beneficial properties for solid-state electrolytes. This review article provides an overview toward the recent advancements in natural clay-based energy materials. First, it comprehensively summarizes the structure, classification, and chemical modification methods of natural clays to make them suitable in energy storage and conversion devices. Then, the particular attention is focused on the application of clays in the fields of lithium-ion batteries, lithium-sulfur batteries, zinc-ion batteries, chloride-ion batteries, supercapacitors, solar cells, and fuel cells. Finally, the possible future research directions are provided for natural clays as energy materials. This review aims at facilitating the rapid developments of natural clay-based energy materials through a fruitful discussion from inorganic and materials chemistry aspects, and also promotes the broad sphere of clay-based materials for other utilization, such as effluent treatment, heavy metal removal, and environmental remediation.

Nanocomposite Polymer Electrolytes of Sodium Alginate and Montmorillonite Clay

Nanocomposite polymer electrolytes (NPEs) were synthesized using sodium alginate (Alg) and either sodium (SCa-3-Na⁺)- or lithium (SCa-3-Li⁺)-modified montmorillonite clays. The samples were characterized by structural, optical, and electrical properties. SCa-3-Na⁺ and SCa-3-Li⁺ clays’ X-ray structural analyses revealed peaks at 2θ = 7.2° and 6.7° that corresponded to the interlamellar distances of 12.3 and 12.8 Å, respectively. Alg-based NPEs X-ray diffractograms showed exfoliated structures for samples with low clay percentages. The increase of clay content promoted the formation of intercalated structures. Electrochemical Impedance Spectroscopy revealed that Alg-based NPEs with 5 wt% of SCa-3-Na⁺ clay presented the highest conductivity of 1.96 × 10⁻² S/cm², and Alg with 10 wt% of SCa-3-Li⁺ showed conductivity of 1.30 × 10⁻² S/cm², both measured at 70 °C. From UV-Vis spectroscopy, it was possible to infer that increasing concentration of clay promoted a decrease of the samples’ transmittance and, consequently, an increase of their reflectance.

Inorganic Fillers in Composite Gel Polymer Electrolytes for High-Performance Lithium and Non-Lithium Polymer Batteries

Among the various types of polymer electrolytes, gel polymer electrolytes have been considered as promising electrolytes for high-performance lithium and non-lithium batteries. The introduction of inorganic fillers into the polymer-salt system of gel polymer electrolytes has emerged as an effective strategy to achieve high ionic conductivity and excellent interfacial contact with the electrode. In this review, the detailed roles of inorganic fillers in composite gel polymer electrolytes are presented based on their physical and electrochemical properties in lithium and non-lithium polymer batteries. First, we summarize the historical developments of gel polymer electrolytes. Then, a list of detailed fillers applied in gel polymer electrolytes is presented. Possible mechanisms of conductivity enhancement by the addition of inorganic fillers are discussed for each inorganic filler. Subsequently, inorganic filler/polymer composite electrolytes studied for use in various battery systems, including Li-, Na-, Mg-, and Zn-ion batteries, are discussed. Finally, the future perspectives and requirements of the current composite gel polymer electrolyte technologies are highlighted.

Biofilm Nanofiber-Coated Separators for Dendrite-Free Lithium Metal Anode and Ultrahigh-Rate Lithium Batteries

Rechargeable batteries that combine high energy density with high power density are highly demanded. However, the wide utilization of lithium metal anode is limited by the uncontrollable dendrite growth, and the conventional lithium-ion batteries (LIBs) commonly suffer from low rate capability. Here, we for the first time develop a biofilm-coated separator for high-energy and high-power batteries. It reveals that the coating of Escherichia coli protein nanofibers can improve electrolyte wettability and lithium transference number and enhance adhesion between separators and electrodes. Thus, lithium dendrite growth is impeded because of the uniform distribution of the Li-ion flux. The modified separator also enables the stable cycling of high-voltage Li|Li_1.2Mn_0.6Ni_0.2O₂ (LNMO) cells at an extremely high rate of 20 C, delivering a high specific capacity of 83.1 mA h g^-1, which exceeds the conventional counterpart. In addition, the modified separator in the Li₄Ti₅O₁₂|LNMO full cell also exhibits a larger capacity of 68.2 mA h g^-1 at 10 C than the uncoated separator of 37.4 mA h g^-1. Such remarkable performances of the modified separators arise from the conformal, adhesive, and endurable coating of biofilm nanofibers. Our work opens up a new opportunity for protein-based biomaterials in practical application of high-energy and high-power batteries.

Ionic Liquid-Based Electrolyte Membranes for Medium-High Temperature Lithium Polymer Batteries

Li⁺-conducting polyethylene oxide-based membranes incorporating N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide are used as electrolyte separators for all-solid-state lithium polymer batteries operating at medium-high temperatures. The incorporation of the ionic liquid remarkably improves the thermal, ion-transport and interfacial properties of the polymer electrolyte, which, in combination with the wide electrochemical stability even at medium-high temperatures, allows high current rates without any appreciable lithium anode degradation. Battery tests carried out at 80 °C have shown excellent cycling performance and capacity retention, even at high rates, which are never tackled by ionic liquid-free polymer electrolytes. No dendrite growth onto the lithium metal anode was observed.