Mechanical Properties of Metallic Glasses

High-throughput development of tough metallic glass films

Fast development of metallic glass films with high toughness has been a long-sought goal of humankind in view of their superior properties and great potential for application in the field of soft electronics. However, until now, there has been no effective experimental strategy because of the lack of suitable and precise toughness measurement technology. In the present work, we introduced a feasible route for developing tough metallic glass films using combinatorial material library preparation and high-throughput toughness measurement via nanoindentation. Based on this route, tough metallic glass films for the quaternary Zr-Ti-Cu-Al system were successfully screened out. The corresponding electron work function map was detected to uncover the physical mechanism for the composition dependence of toughness. In addition, the preliminary assessments of the screened tough metallic glass films as strain-sensing materials were also conducted. Our current research not only provides a versatile toolbox for high-throughput development of tough metallic glass films, but also exemplifies their potential as strain-sensing materials.

Synthesis of Free-Standing Pd-Ni-P Metallic Glass Nanoparticles with Durable Medium-Range Ordered Structure for Enhanced Electrocatalytic Properties

Topologically disordered metallic glass nanoparticles (MGNPs) with highly active and tailorable surface chemistries have immense potential for functional uses. The synthesis of free-standing MGNPs is crucial and intensively pursued because their activity strongly depends on their exposed surfaces. Herein, a novel laser-evaporated inert-gas condensation method is designed and successfully developed for synthesizing free-standing MGNPs without substrates or capping agents, which is implemented via pulse laser-induced atomic vapor deposition under an inert helium atmosphere. In this way, the metallic atoms vaporized from the targets collide with helium atoms and then condense into short-range-order (SRO) clusters, which mutually assemble to form the MGNPs. Using this method, free-standing Pd40 Ni40 P20 MGNPs with a spherical morphology are synthesized, which demonstrates satisfactory electrocatalytic activity and durability in oxygen reduction reactions. Moreover, local structure investigations using synchrotron pair distribution function techniques reveal the transformation of SRO cluster connection motifs of the MGNPs from face-sharing to edge-sharing modes during cyclic voltammetry cycles, which enhances the electrochemical stability by blocking crystallization. This approach provides a general strategy for preparing free-standing MGNPs with high surface activities, which may have widespread functional applications.

Research on metallic glasses at the atomic scale: a systematic review

Metallic glasses (MGs) have been long investigated in material science to understand the origin of their remarkable properties. With the help of computational simulations, researchers have delved into structure-property relationships, leading to a large number of reports. To quantify the available literature, we employed systematic review and bibliometric analysis on studies related to MGs and classical molecular dynamics simulations from 2000 to 2021. It was found that the total number of articles has increased remarkably, with China and the USA producing more than half of the reports. However, high-impact articles were mainly conducted in the latter. Collaboration networks revealed that top contributor authors are strongly connected with other researchers, which emphasizes the relevance of scientific cooperation. In regard to the evolution of research topics, according to article keywords, plastic behavior has been a recurrent subject since the early 2000s. Nevertheless, the traditional approach of studying monolithic MGs at the short-range order evolved to complex composites with characterizations at the medium-range order, including topics such as nanoglasses, amorphous/crystalline nanolaminates, rejuvenation, among others. As a whole, these findings provide researchers with an overview of past and current trends of research areas, as well as some of the leading authors, productivity statistics, and collaboration networks.

Nonaffine Strains Control Ductility of Metallic Glasses

The origin of limited plasticity in metallic glasses is elusive, with no apparent link to their atomic structure. We propose that the response of the glassy structure to applied stress, not the original structure itself, provides a gauge to predict the degree of plasticity. We carried out high-energy x-ray diffraction on various bulk metallic glasses (BMGs) under uniaxial compression within the elastic limit and evaluated the anisotropic pair distribution function. We show that the extent of local deviation from the affine (uniform) deformation in the elastic regime is strongly correlated with the plastic behavior of BMGs beyond yield, across chemical compositions and sample history. The results suggest that the propensity for collective local atomic rearrangements under stress promotes plasticity.

Mechanical Behavior of Fe- and Co-Based Amorphous Alloys after Thermal Action

The effect of heat treatment on the structure and mechanical properties of Co-Fe-Cr-Si-B/Fe-Cr-B/Fe-Ni-B amorphous alloys has been studied systematically. Melt-quenching (spinning method) was used for production of investigated amorphous alloys. The transmission electron microscopy (TEM) was used to study the structure transformations. The effect of temperature on deformation behavior (plasticity, microhardness, crack resistance, and the density and average length of shear bands) of the amorphous alloys was studied by bending and microindentation. It is shown that the ductile–brittle transition, which occurs at the stage of structure relaxation in amorphous alloys, is caused by two factors: a decrease in the susceptibility of the amorphous matrix to plastic flow and an abrupt decrease in the resistance to the development of quasibrittle cracks. It is established that the transition to a two-phase amorphous–nanocrystalline state upon annealing leads to substantial strengthening of the alloys and a partial recovery of their plasticity. It is proved that the strengthening of amorphous alloys at the initial stages of crystallization can be initiated by the difference in the elastic moduli of the amorphous matrix and the precipitated nanocrystals, as well as by the specific features of the interaction between nanocrystalline phase particles and shear bands propagating under external actions. It is established that the phenomenon of plasticization in amorphous alloys (the crack resistance can increase after annealing in a certain temperature range) is due to the effective retardation of cracks on nanoparticles.

Effect of the Free Volume on the Electronic Structure of Cu70Zr30 Metallic Glasses

While it is accepted that the plastic behavior of metallic glasses is affected by their free volume content, the effect on chemical bonding has not been investigated systematically. According to electronic structure analysis, the overall bond strength is not significantly affected by the free volume content. However, with an increasing free volume content, the average coordination number decreases. Furthermore, the volume fraction of regions containing atoms with a lower coordination number increases. As the local bonding character changes from bonding to anti-bonding with a decreasing coordination number, bonding is weakened in the volume fraction of a lower coordination number. During deformation, the number of strong, short-distance bonds decreases more for free volume-containing samples than for samples without free volume, resulting in additional bond weakening. Therefore, we show that the introduction of free volume causes the formation of volume fractions of a lower coordination number, resulting in weaker bonding, and propose that this is the electronic structure origin of the enhanced plastic behavior reported for glasses containing free volume.

Isokinetic Analysis of Fe41Co7Cr15Mo14Y2C15B6 Bulk Metallic Glass: Effect of Minor Copper Addition

In the present study, (Fe41Co7Cr15Mo14Y2C15B6)100-xCux (x = 0, 0.25 and 0.5 at.%) amorphous alloys were prepared by copper-mold casting. To clarify the effect of the minor addition of copper on the mechanism of nucleation and growth during the crystallization process, an isokinetic analysis was performed. The activation energies (E) of the various crystallization stages were calculated by using theoretical models including Kissinger-Akahira-Sunose (KAS), Flynn-Wall-Ozawa (FWO), Augis-Bennett and Gao-Wang methods. In addition, Augis-Bennett, Gao-Wang and Matusita methods were used to investigate the nucleation and growth mechanisms and to determine other kinetic parameters including Avrami exponent (n), the rate constant (Kp) and dimensionality of growth (m). The obtained results revealed that the activation energy-as well as thermal stability-was changed with minor addition of copper. In addition, the obtained Avrami exponent values were confirmed by Johnson-Mehl-Avrami-Kolmogorov (JMAK) method. The research findings demonstrated that the value of Avrami exponent is changed with minor addition of copper, so that the Avrami exponents of all crystallization stages, except the second peak for copper-free amorphous alloy, were equal to integer values ranging from two to four, indicating that the growth mechanisms were controlled by interface. Moreover, the kinetic parameters of n and b for all peaks were increased by an increase in crystallization temperature, which can be attributed to the increase in the nucleation rate.

Glass Stability Changes the Nature of Yielding under Oscillatory Shear

We perform molecular dynamics simulations to investigate the effect of a glass preparation on its yielding transition under oscillatory shear. We use swap Monte Carlo to investigate a broad range of glass stabilities from poorly annealed to highly stable systems. We observe a qualitative change in the nature of yielding, which evolves from ductile to brittle as glass stability increases. Our results disentangle the relative role of mechanical and thermal annealing on the mechanical properties of amorphous solids, which is relevant for various experimental situations from the rheology of soft materials to fatigue failure in metallic glasses.

Observation of indentation-induced shear bands in a metal-organic framework glass

Metal-organic framework (MOF) glasses are a newly emerged family of melt-quenched glasses. Recently, several intriguing features, such as ultrahigh glass-forming ability and low liquid fragility, have been discovered in a number of zeolitic imidazolate frameworks (ZIFs) that are a subset of MOFs. However, the fracture behavior of ZIF glasses has not been explored. Here we report an observation of both cracking pattern and shear bands induced by indentation in a representative melt-quenched ZIF glass, that is, ZIF-62 glass (ZnIm_1.68bIm_0.32). The shear banding in the ZIF glass is in strong contrast to the cracking behavior of other types of fully polymerized glasses, which do not exhibit any shear bands under indentation. We attribute this anomalous cracking behavior to the easy breakage of the coordinative bonds (Zn-N) in ZIF glasses, since these bonds are much weaker than the ionic and covalent bonds in network glasses.

Shear Softening in a Metallic Glass: First-Principles Local-Stress Analysis

Metallic glasses deform elastically under stress. However, the atomic-level origin of elastic properties of metallic glasses remain unclear. In this Letter using ab initio molecular dynamics simulations of the Cu_{50}Zr_{50} metallic glass under shear strain, we show that the heterogeneous stress relaxation results in the increased charge transfer from Zr to Cu atoms, enhancing the softening of the shear modulus. Changes in compositional short-range order and atomic position shifts due to the nonaffine deformation are discussed. It is shown that the Zr subsystem exhibits a stiff behavior, whereas the displacements of Cu atoms from their initial positions, induced by the strain, provide the stress drop and softening.

Flow units as dynamic defects in metallic glassy materials

In a crystalline material, structural defects such as dislocations or twins are well defined and largely determine the mechanical and other properties of the material. For metallic glass (MG) with unique properties in the absence of a long-range lattice, intensive efforts have focused on the search for similar 'defects'. The primary objective has been the elucidation of the flow mechanism of MGs. However, their atomistic mechanism of mechanical deformation and atomic flow response to stress, temperature, and failure, have proven to be challenging. In this paper, we briefly review the state-of-the-art studies on the dynamic defects in metallic glasses from the perspective of flow units. The characteristics, activation and evolution processes of flow units as well as their correlation with mechanical properties, including plasticity, strength, fracture, and dynamic relaxation, are introduced. We show that flow units that are similar to structural defects such as dislocations are crucial in the optimization and design of metallic glassy materials via the thermal, mechanical and high-pressure tailoring of these units. In this report, the relevant issues and open questions with regard to the flow unit model are also introduced and discussed.

Long-term impact of sewage irrigation on soil properties and assessing risk in relation to transfer of metals to human food chain

A case study was undertaken to assess the risk of sewage-irrigated soils in relation to the transfer of trace elements to rice and wheat grain. For this purpose, peri-urban agricultural lands under the Keshopur Effluent Irrigation Scheme (KEIS) of Delhi were selected. These agricultural lands have been receiving irrigation through sewage effluents since 1979. Sewage effluent, groundwater, soil, and plant (rice and wheat grain) samples were collected with GPS coordinates from this peri-urban area. Under wheat crop, sewage irrigation for four decades resulted into a significant buildup of zinc (141 %), copper (219 %), iron (514 %), nickel (75.0 %), and lead (28.1 %) in sewage-irrigated soils over adjacent tube well water-irrigated ones. Under rice crop, there was also a significant buildup of phosphorus (339 %), sulfur (130 %), zinc (287 %), copper (352 %), iron (457 %), nickel (258 %), lead (136 %), and cadmium (147 %) in sewage-irrigated soils as compared to that of tube well water-irrigated soils. The values of hazard quotient (HQ) for intake of trace toxic elements by humans through consumption of rice and wheat grain grown on these sewage-irrigated soils were well within the safe permissible limit. The variation in Zn, Ni, and Cd content in wheat grain could be explained by solubility-free ion activity model (FIAM) to the extent of 50.1, 56.8, and 37.2 %, respectively. Corresponding values for rice grain were 49.9, 41.2, and 42.7 %, respectively. As high as 36.4 % variation in As content in rice grain could be explained by solubility-FIAM model. Toxic limit of extractable Cd and As in soil for rice in relation to soil properties and human health hazard associated with consumption of rice grain by humans was established. A similar exercise was also done in respect of Cd for wheat. The conceptual framework of fixing the toxic limit of extractable metals and metalloid in soils with respect to soil properties and human health hazard under the modeling framework was established.