1
|
Pires-Junior R, Frizera A, Marques C, Leal-Junior A. Development of Fiber-Bragg-Grating-Integrated Artificial Embedded Tendon for Multifunctional Assessment of Temperature, Strain, and Curvature. SENSORS (BASEL, SWITZERLAND) 2023; 23:7332. [PMID: 37687788 PMCID: PMC10490486 DOI: 10.3390/s23177332] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/10/2023] [Revised: 08/11/2023] [Accepted: 08/21/2023] [Indexed: 09/10/2023]
Abstract
This paper presents the development and application of an optical fiber-embedded tendon based on biomimetic multifunctional structures. The tendon was fabricated using a thermocure resin (polyurethane) and the three optical fibers with one fiber Bragg grating (FBG) inscribed in each fiber. The first step in the FBG-integrated artificial tendon analysis is the mechanical properties assessment through stress-strain curves, which indicated the customization of the proposed device, since it is possible to tailor the Young's modulus and strain limit of the tendon as a function of the integrated optical fibers, where the coated and uncoated fibers lead to differences in both parameters, i.e., strain limits and Young's modulus. Then, the artificial tendon integrated with FBG sensors undergoes three types of characterization, which assesses the influence of temperature, single-axis strain, and curvature. Results show similarities in the temperature responses in all analyzed FBGs, where the variations are related to the heterogeneity on the polyurethane matrix distribution. In contrast, the FBGs embedded in the tendon presented a reduction in the strain sensitivity when compared with the bare FBGs (i.e., without the integration in the artificial tendon). Such results demonstrated a reduction in the sensitivity as high as 77% when compared with the bare FBGs, which is related to strain field distributions in the FBGs when embedded in the tendon. In addition, the curvature tests indicated variations in both optical power and wavelength shift, where both parameters are used on the angle estimation using the proposed multifunctional artificial tendon. To that extent, root mean squared error of around 3.25° is obtained when both spectral features are considered. Therefore, the proposed approach indicates a suitable method for the development of smart structures in which the multifunctional capability of the device leads to the possibility of using not only as a structural element in tendon-driven actuators and devices, but also as a sensor element for the different structures.
Collapse
Affiliation(s)
- Robertson Pires-Junior
- Graduate Program in Electrical Engineering, Federal University of Espírito Santo, Vitoria 29075-910, Brazil; (R.P.-J.); (A.F.)
| | - Anselmo Frizera
- Graduate Program in Electrical Engineering, Federal University of Espírito Santo, Vitoria 29075-910, Brazil; (R.P.-J.); (A.F.)
| | - Carlos Marques
- Department of Physics and I3N, University of Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro, Portugal;
| | - Arnaldo Leal-Junior
- Graduate Program in Electrical Engineering, Federal University of Espírito Santo, Vitoria 29075-910, Brazil; (R.P.-J.); (A.F.)
| |
Collapse
|
2
|
Ha H, Suryaprabha T, Choi C, Chandio ZA, Kim B, Lim S, Cheong JY, Hwang B. Recent research trends in textile-based temperature sensors: a mini review. NANOTECHNOLOGY 2023; 34:422001. [PMID: 37473742 DOI: 10.1088/1361-6528/ace913] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/15/2023] [Accepted: 07/20/2023] [Indexed: 07/22/2023]
Abstract
In this review, the current state of research on textile-based temperature sensors is explored by focusing on their potential use in various applications. The textile-based sensors show various advantages including flexibility, conformability and seamlessness for the wearer. Integration of the textile-based sensors into clothes or fabric-based products enables continuous and sensitive monitoring of change in temperature, which can be used for various medical and fitness applications. However, there are lacks of comprehensive review on the textile-based temperature sensors. This review introduces various types of textile-based temperature sensors, including resistive, thermoelectric and fibre-optical sensors. In addition, the challenges that need to be addressed to fully realise their potential, which include improving sensitivity and accuracy, integrating wireless communication capabilities, and developing low-cost fabrication techniques. The technological advances in textile-based temperature sensors to overcome the limitations will revolutionize wearable devices requiring function of temperature monitoring.
Collapse
Affiliation(s)
- Heebo Ha
- School of Integrative Engineering, Chung-Ang University, Seoul 06974, Republic of Korea
| | | | - Chunghyeon Choi
- School of Integrative Engineering, Chung-Ang University, Seoul 06974, Republic of Korea
| | - Zubair Ahmed Chandio
- Bavarian Center for Battery Technology (BayBatt) and Department of Chemistry, University of Bayreuth, Universitätsstraße 30, D-95447 Bayreuth, Germany
| | - Byungjin Kim
- Department of Mechanical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Republic of Korea
| | - Sooman Lim
- Department of Flexible and Printable Electronics, LANL-JBNU Engineering Institute, Jeonbuk National University, Jeonju, Republic of Korea
| | - Jun Young Cheong
- Bavarian Center for Battery Technology (BayBatt) and Department of Chemistry, University of Bayreuth, Universitätsstraße 30, D-95447 Bayreuth, Germany
| | - Byungil Hwang
- School of Integrative Engineering, Chung-Ang University, Seoul 06974, Republic of Korea
| |
Collapse
|
3
|
Zhang X, Wang C, Zheng T, Wu H, Wu Q, Wang Y. Wearable Optical Fiber Sensors in Medical Monitoring Applications: A Review. SENSORS (BASEL, SWITZERLAND) 2023; 23:6671. [PMID: 37571457 PMCID: PMC10422468 DOI: 10.3390/s23156671] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/19/2023] [Revised: 07/17/2023] [Accepted: 07/21/2023] [Indexed: 08/13/2023]
Abstract
Wearable optical fiber sensors have great potential for development in medical monitoring. With the increasing demand for compactness, comfort, accuracy, and other features in new medical monitoring devices, the development of wearable optical fiber sensors is increasingly meeting these requirements. This paper reviews the latest evolution of wearable optical fiber sensors in the medical field. Three types of wearable optical fiber sensors are analyzed: wearable optical fiber sensors based on Fiber Bragg grating, wearable optical fiber sensors based on light intensity changes, and wearable optical fiber sensors based on Fabry-Perot interferometry. The innovation of wearable optical fiber sensors in respiration and joint monitoring is introduced in detail, and the main principles of three kinds of wearable optical fiber sensors are summarized. In addition, we discuss their advantages, limitations, directions to improve accuracy and the challenges they face. We also look forward to future development prospects, such as the combination of wireless networks which will change how medical services are provided. Wearable optical fiber sensors offer a viable technology for prospective continuous medical surveillance and will change future medical benefits.
Collapse
Affiliation(s)
- Xuhui Zhang
- Heilongjiang Province Key Laboratory of Laser Spectroscopy Technology and Application, Harbin University of Science and Technology, Harbin 150080, China; (X.Z.); (C.W.); (H.W.)
| | - Chunyang Wang
- Heilongjiang Province Key Laboratory of Laser Spectroscopy Technology and Application, Harbin University of Science and Technology, Harbin 150080, China; (X.Z.); (C.W.); (H.W.)
| | - Tong Zheng
- School of Artificial Intelligence, Beijing Technology and Business University, Beijing 100048, China;
| | - Haibin Wu
- Heilongjiang Province Key Laboratory of Laser Spectroscopy Technology and Application, Harbin University of Science and Technology, Harbin 150080, China; (X.Z.); (C.W.); (H.W.)
| | - Qing Wu
- Heilongjiang Province Key Laboratory of Laser Spectroscopy Technology and Application, Harbin University of Science and Technology, Harbin 150080, China; (X.Z.); (C.W.); (H.W.)
| | - Yunzheng Wang
- Center for Optics Research and Engineering, Shandong University, Qingdao 266237, China
| |
Collapse
|
4
|
Kaur B, Kumar S, Kaushik BK. Novel Wearable Optical Sensors for Vital Health Monitoring Systems-A Review. BIOSENSORS 2023; 13:bios13020181. [PMID: 36831947 PMCID: PMC9954035 DOI: 10.3390/bios13020181] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/30/2022] [Revised: 01/18/2023] [Accepted: 01/20/2023] [Indexed: 05/09/2023]
Abstract
Wearable sensors are pioneering devices to monitor health issues that allow the constant monitoring of physical and biological parameters. The immunity towards electromagnetic interference, miniaturization, detection of nano-volumes, integration with fiber, high sensitivity, low cost, usable in harsh environments and corrosion-resistant have made optical wearable sensor an emerging sensing technology in the recent year. This review presents the progress made in the development of novel wearable optical sensors for vital health monitoring systems. The details of different substrates, sensing platforms, and biofluids used for the detection of target molecules are discussed in detail. Wearable technologies could increase the quality of health monitoring systems at a nominal cost and enable continuous and early disease diagnosis. Various optical sensing principles, including surface-enhanced Raman scattering, colorimetric, fluorescence, plasmonic, photoplethysmography, and interferometric-based sensors, are discussed in detail for health monitoring applications. The performance of optical wearable sensors utilizing two-dimensional materials is also discussed. Future challenges associated with the development of optical wearable sensors for point-of-care applications and clinical diagnosis have been thoroughly discussed.
Collapse
Affiliation(s)
- Baljinder Kaur
- Department of Electronics and Communication Engineering, Indian Institute of Technology Roorkee, Roorkee 247667, India
| | - Santosh Kumar
- Shandong Key Laboratory of Optical Communication Science and Technology, School of Physics Science and Information Technology, Liaocheng University, Liaocheng 252059, China
- Correspondence: (S.K.); (B.K.K.)
| | - Brajesh Kumar Kaushik
- Department of Electronics and Communication Engineering, Indian Institute of Technology Roorkee, Roorkee 247667, India
- Correspondence: (S.K.); (B.K.K.)
| |
Collapse
|
5
|
Lupi C, Vendittozzi C, Ciro E, Felli F. FBG Spectrum Regeneration by Ni-Coating and High-Temperature Treatment. SENSORS (BASEL, SWITZERLAND) 2022; 22:s22197255. [PMID: 36236352 PMCID: PMC9570835 DOI: 10.3390/s22197255] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/09/2022] [Revised: 09/17/2022] [Accepted: 09/20/2022] [Indexed: 05/14/2023]
Abstract
FBG sensors are used in many scientific and industrial fields for assessing the structural integrity of mechanical components and in very high (above 600 °C) or very low (cryogenic) temperature applications. The main concerns with the use of such sensors in applications involving extreme temperatures are related partly to the instability of the reflected spectrum, which tends to dissolve into the noise floor, and partly to the degradation of the mechanical properties of the optical fiber, which tends to worsen the inherent brittleness. All of this raises the need for a robust nickel protective coating to ensure the grating's integrity in high-temperature environments. In addition, the inherent brittleness of fiber-optic gratings leaves one to wonder whether it is possible to recover a broken, seemingly unusable sensor. In this way, a single-peak commercial FBG was intentionally broken in the middle of the grating length and re-spliced, inducing a strongly asymmetric chirped-like spectrum; then, a nickel coating was electrodeposited on its surface. The most important outcome achieved by this work is the regeneration of a highly distorted reflected spectrum through three thermal cycles performed from room temperature up to 500, 750, and 800 °C, respectively. After reaching a temperature of at least 700 °C, the spectrum, which has been drastically altered by splicing, becomes stable and restores its single peak shape. A further stabilization cycle carried out at 800 °C for 80 min led to an estimation of the stabilizing time of the new single-peak reflected spectrum.
Collapse
Affiliation(s)
- Carla Lupi
- Dipartimento Ingegneria Chimica Materiali Ambiente, Sapienza Rome University, Via Eudossiana 18, 00184 Roma, Italy
- Correspondence: ; Tel.: +39-0644585636
| | | | - Erwin Ciro
- Dipartimento Ingegneria Chimica Materiali Ambiente, Sapienza Rome University, Via Eudossiana 18, 00184 Roma, Italy
- Department of Engineering Sciences, Università degli Studi Guglielmo Marconi, 00193 Rome, Italy
| | - Ferdinando Felli
- Dipartimento Ingegneria Chimica Materiali Ambiente, Sapienza Rome University, Via Eudossiana 18, 00184 Roma, Italy
| |
Collapse
|
6
|
Saidi A, Gauvin C, Ladhari S, Nguyen-Tri P. Advanced Functional Materials for Intelligent Thermoregulation in Personal Protective Equipment. Polymers (Basel) 2021; 13:3711. [PMID: 34771268 PMCID: PMC8587695 DOI: 10.3390/polym13213711] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/01/2021] [Revised: 10/20/2021] [Accepted: 10/21/2021] [Indexed: 11/17/2022] Open
Abstract
The exposure to extreme temperatures in workplaces involves physical hazards for workers. A poorly acclimated worker may have lower performance and vigilance and therefore may be more exposed to accidents and injuries. Due to the incompatibility of the existing standards implemented in some workplaces and the lack of thermoregulation in many types of protective equipment that are commonly fabricated using various types of polymeric materials, thermal stress remains one of the most frequent physical hazards in many work sectors. However, many of these problems can be overcome with the use of smart textile technologies that enable intelligent thermoregulation in personal protective equipment. Being based on conductive and functional polymeric materials, smart textiles can detect many external stimuli and react to them. Interconnected sensors and actuators that interact and react to existing risks can provide the wearer with increased safety, protection, and comfort. Thus, the skills of smart protective equipment can contribute to the reduction of errors and the number and severity of accidents in the workplace and thus promote improved performance, efficiency, and productivity. This review provides an overview and opinions of authors on the current state of knowledge on these types of technologies by reviewing and discussing the state of the art of commercially available systems and the advances made in previous research works.
Collapse
Affiliation(s)
- Alireza Saidi
- Department of Chemistry, Biochemistry and Physics, Université du Québec à Trois-Rivières (UQTR), 3351 Boulevard des Forges, Trois-Rivières, QC G8Z 4M3, Canada
- Laboratory of Advanced Materials for Energy and Environment, Université du Québec à Trois-Rivières (UQTR), 3351 Boulevard des Forges, Trois-Rivières, QC G8Z 4M3, Canada;
- Institut de Recherche Robert-Sauvé en Santé et en Sécurité du Travail (IRSST), 505 Boulevard de Maisonneuve Ouest, Montréal, QC H3A 3C2, Canada;
| | - Chantal Gauvin
- Institut de Recherche Robert-Sauvé en Santé et en Sécurité du Travail (IRSST), 505 Boulevard de Maisonneuve Ouest, Montréal, QC H3A 3C2, Canada;
| | - Safa Ladhari
- Laboratory of Advanced Materials for Energy and Environment, Université du Québec à Trois-Rivières (UQTR), 3351 Boulevard des Forges, Trois-Rivières, QC G8Z 4M3, Canada;
| | - Phuong Nguyen-Tri
- Department of Chemistry, Biochemistry and Physics, Université du Québec à Trois-Rivières (UQTR), 3351 Boulevard des Forges, Trois-Rivières, QC G8Z 4M3, Canada
- Laboratory of Advanced Materials for Energy and Environment, Université du Québec à Trois-Rivières (UQTR), 3351 Boulevard des Forges, Trois-Rivières, QC G8Z 4M3, Canada;
| |
Collapse
|
7
|
Editorial for the Special Issue on IMCO 2019. MICROMACHINES 2020; 11:mi11070684. [PMID: 32679662 PMCID: PMC7407955 DOI: 10.3390/mi11070684] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Subscribe] [Scholar Register] [Received: 07/09/2020] [Accepted: 07/10/2020] [Indexed: 11/16/2022]
Abstract
This special issue is a collection of 12 technical papers and two reviews that are expanded into full-length articles from the conference abstracts of the 9th International Multidisciplinary Conference on Optofluidics (IMCO 2019) held in Hong Kong in 14-17 June 2019 [...].
Collapse
|
8
|
Root W, Bechtold T, Pham T. Textile-Integrated Thermocouples for Temperature Measurement. MATERIALS 2020; 13:ma13030626. [PMID: 32023832 PMCID: PMC7040602 DOI: 10.3390/ma13030626] [Citation(s) in RCA: 14] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/09/2019] [Revised: 01/15/2020] [Accepted: 01/28/2020] [Indexed: 11/16/2022]
Abstract
The integration of conductive materials in textiles is key for detecting temperature in the wearer´s environment. When integrating sensors into textiles, properties such as their flexibility, handle, and stretch must stay unaffected by the functionalization. Conductive materials are difficult to integrate into textiles, since wires are stiff, and coatings show low adhesion. This work shows that various substrates such as cotton, cellulose, polymeric, carbon, and optical fiber-based textiles are used as support materials for temperature sensors. Suitable measurement principles for use in textiles are based on resistance changes, optical interferences (fiber Bragg grating), or thermoelectric effects. This review deals with developments in the construction of temperature sensors and the production of thermocouples for use in textiles. The operating principle of thermocouples is based on temperature gradients building up between a heated and a cold junction of two conductors, which is converted to a voltage output signal. This work also summarizes integration methods for thermocouples and other temperature-sensing techniques as well as the manufacture of conductive materials in textiles. In addition, textile thermocouples are emphasized as suitable and indispensable elements in sensor concepts for smart textiles.
Collapse
|