Microfluidic Synthesis, Control, and Sensing of Magnetic Nanoparticles: A Review

Advancements in enzyme immobilization on magnetic nanomaterials: toward sustainable industrial applications

Enzymes are widely used in biofuels, food, and pharmaceuticals. The immobilization of enzymes on solid supports, particularly magnetic nanomaterials, enhances their stability and catalytic activity. Magnetic nanomaterials are chosen for their versatility, large surface area, and superparamagnetic properties, which allow for easy separation and reuse in industrial processes. Researchers focus on the synthesis of appropriate nanomaterials tailored for specific purposes. Immobilization protocols are predefined and adapted to both enzymes and support requirements for optimal efficiency. This review provides a detailed exploration of the application of magnetic nanomaterials in enzyme immobilization protocols. It covers methods, challenges, advantages, and future perspectives, starting with general aspects of magnetic nanomaterials, their synthesis, and applications as matrices for solid enzyme stabilization. The discussion then delves into existing enzymatic immobilization methods on magnetic nanomaterials, highlighting advantages, challenges, and potential applications. Further sections explore the industrial use of various enzymes immobilized on these materials, the development of enzyme-based bioreactors, and prospects for these biocatalysts. In summary, this review provides a concise comparison of the use of magnetic nanomaterials for enzyme stabilization, highlighting potential industrial applications and contributing to manufacturing optimization.

Synthesis of Submicron CaCO3 Particles in 3D-Printed Microfluidic Chips Supporting Advection and Diffusion Mixing

Microfluidic technology provides a solution to the challenge of continuous CaCO3 particle synthesis. In this study, we utilized a 3D-printed microfluidic chip to synthesize CaCO3 micro- and nanoparticles in vaterite form. Our primary focus was on investigating a continuous one-phase synthesis method tailored for the crystallization of these particles. By employing a combination of confocal and scanning electron microscopy, along with Raman spectroscopy, we were able to thoroughly evaluate the synthesis efficiency. This evaluation included aspects such as particle size distribution, morphology, and polymorph composition. The results unveiled the existence of two distinct synthesis regimes within the 3D-printed microfluidic chips, which featured a channel cross-section of 2 mm2. In the first regime, which was characterized by chaotic advection, particles with an average diameter of around 2 μm were produced, thereby displaying a broad size distribution. Conversely, the second regime, marked by diffusion mixing, led to the synthesis of submicron particles (approximately 800-900 nm in diameter) and even nanosized particles (70-80 nm). This research significantly contributes valuable insights to both the understanding and optimization of microfluidic synthesis processes, particularly in achieving the controlled production of submicron and nanoscale particles.

Single-Cell RNA Sequencing in Organ and Cell Transplantation

Single-cell RNA sequencing is a high-throughput novel method that provides transcriptional profiling of individual cells within biological samples. This method typically uses microfluidics systems to uncover the complex intercellular communication networks and biological pathways buried within highly heterogeneous cell populations in tissues. One important application of this technology sits in the fields of organ and stem cell transplantation, where complications such as graft rejection and other post-transplantation life-threatening issues may occur. In this review, we first focus on research in which single-cell RNA sequencing is used to study the transcriptional profile of transplanted tissues. This technology enables the analysis of the donor and recipient cells and identifies cell types and states associated with transplant complications and pathologies. We also review the use of single-cell RNA sequencing in stem cell implantation. This method enables studying the heterogeneity of normal and pathological stem cells and the heterogeneity in cell populations. With their remarkably rapid pace, the single-cell RNA sequencing methodologies will potentially result in breakthroughs in clinical transplantation in the coming years.

Combined Funnel, Concentrator, and Particle Valve Functional Element for Magnetophoretic Bead Transport Based on Engineered Magnetic Domain Patterns

Controlled actuation of superparamagnetic beads (SPBs) within a microfluidic environment using tailored dynamic magnetic field landscapes (MFLs) is a potent approach for the realization of point-of-care diagnostics within Lab-on-a-chip (LOC) systems. Making use of an engineered magnetic domain pattern as the MFL source, a functional LOC-element with combined magnetophoretic "funnel", concentrator, and "valve" functions for micron-sized SPBs is presented. A parallel-stripe domain pattern design with periodically decreasing/increasing stripe lengths is fabricated in a topographically flat continuous exchange biased (EB) thin film system by ion bombardment induced magnetic patterning (IBMP). It is demonstrated that, upon application of external magnetic field pulses, a fully reversible concentration of SPBs at the domain pattern's focal point occurs. In addition, it is shown that this functionality may be used as an SPB "funnel", allowing only a maximum number of particles to pass through the focal point. Adjusting the pulse time length, the focal point can be clogged up for incoming SPBs, resembling an on/off switchable particle "valve". The observations are supported by quantitative theoretical force considerations.

Magnetic nanoparticles fabricated/integrated with microfluidics for biological applications: A review

Nanostructured materials have gained significant attention in recent years for their potential in biological applications, such as cell and biomolecular sorting, as well as early detection of metastatic cancer. Among these materials, magnetic nanoparticles (MNPs) stand out for their easy functionalization, high specific surface area, chemical stability, and superparamagnetic properties. However, conventional fabrication methods can lead to inconsistencies in MNPs' characteristics and performance, highlighting the need for a cost-effective, controllable, and reproducible synthesis approach. In this review, we will discuss the utilization of microfluidic technology as a cutting-edge strategy for the continuous and regulated synthesis of MNPs. This approach has proven effective in producing MNPs with a superior biomedical performance by offering precise control over particle size, shape, and surface properties. We will examine the latest research findings on developing and integrating MNPs synthesized through continuous microfluidic processes for a wide range of biological applications. By providing an overview of the current state of the field, this review aims to showcase the advantages of microfluidics in the fabrication and integration of MNPs, emphasizing their potential to revolutionize diagnostic and therapeutic methods within the realm of biotechnology.

Microfluidic-Generated Seeds for Gold Nanotriangle Synthesis in Three or Two Steps

Nanoparticle synthesis has drawn great attention in the last decades. The study of crystal growth mechanisms and optimization of the existing methods lead to the increasing accessibility of nanomaterials, such as gold nanotriangles which have great potential in the fields of plasmonics and catalysis. To form such structures, a careful balance of reaction parameters has to be maintained. Herein, a novel synthesis of gold nanotriangles from seeds derived with a micromixer, which provides a highly efficient mixing and simple parameter control is reported. The impact of the implemented reactor on the primary seed characteristics is investigated. The following growth steps are studied to reveal the phenomena affecting the shape yield. The use of microfluidic seeds led to the formation of well-defined triangles with a narrower size distribution compared to the entirely conventional batch synthesis. A shortened two-step procedure for the formation of triangles directly from primary seeds, granting an express but robust synthesis is further described. Moreover, the need for a thorough study of seed crystallinity depending on the synthesis conditions, which - together with additional parameter optimization - will bring a new perspective to the use of micromixers which are promising for scaling up nanomaterial production is highlighted.

Microfluidic devices for the detection of disease-specific proteins and other macromolecules, disease modelling and drug development: A review

Microfluidics is a revolutionary technology that has promising applications in the biomedical field.Integrating microfluidic technology with the traditional assays unravels the innumerable possibilities for translational biomedical research. Microfluidics has the potential to build up a novel platform for diagnosis and therapy through precise manipulation of fluids and enhanced throughput functions. The developments in microfluidics-based devices for diagnostics have evolved in the last decade and have been established for their rapid, effective, accurate and economic advantages. The efficiency and sensitivity of such devices to detect disease-specific macromolecules like proteins and nucleic acids have made crucial impacts in disease diagnosis. The disease modelling using microfluidic systems provides a more prominent replication of the in vivo microenvironment and can be a better alternative for the existing disease models. These models can replicate critical microphysiology like the dynamic microenvironment, cellular interactions, and biophysical and biochemical cues. Microfluidics also provides a promising system for high throughput drug screening and delivery applications. However, microfluidics-based diagnostics still encounter related challenges in the reliability, real-time monitoring and reproducibility that circumvents this technology from being impacted in the healthcare industry. This review highlights the recent microfluidics developments for modelling and diagnosing common diseases, including cancer, neurological, cardiovascular, respiratory and autoimmune disorders, and its applications in drug development.

A review on microfluidic-assisted nanoparticle synthesis, and their applications using multiscale simulation methods

Recent years have witnessed an increased interest in the development of nanoparticles (NPs) owing to their potential use in a wide variety of biomedical applications, including drug delivery, imaging agents, gene therapy, and vaccines, where recently, lipid nanoparticle mRNA-based vaccines were developed to prevent SARS-CoV-2 causing COVID-19. NPs typically fall into two broad categories: organic and inorganic. Organic NPs mainly include lipid-based and polymer-based nanoparticles, such as liposomes, solid lipid nanoparticles, polymersomes, dendrimers, and polymer micelles. Gold and silver NPs, iron oxide NPs, quantum dots, and carbon and silica-based nanomaterials make up the bulk of the inorganic NPs. These NPs are prepared using a variety of top-down and bottom-up approaches. Microfluidics provide an attractive synthesis alternative and is advantageous compared to the conventional bulk methods. The microfluidic mixing-based production methods offer better control in achieving the desired size, morphology, shape, size distribution, and surface properties of the synthesized NPs. The technology also exhibits excellent process repeatability, fast handling, less sample usage, and yields greater encapsulation efficiencies. In this article, we provide a comprehensive review of the microfluidic-based passive and active mixing techniques for NP synthesis, and their latest developments. Additionally, a summary of microfluidic devices used for NP production is presented. Nonetheless, despite significant advancements in the experimental procedures, complete details of a nanoparticle-based system cannot be deduced from the experiments alone, and thus, multiscale computer simulations are utilized to perform systematic investigations. The work also details the most common multiscale simulation methods and their advancements in unveiling critical mechanisms involved in nanoparticle synthesis and the interaction of nanoparticles with other entities, especially in biomedical and therapeutic systems. Finally, an analysis is provided on the challenges in microfluidics related to nanoparticle synthesis and applications, and the future perspectives, such as large-scale NP synthesis, and hybrid formulations and devices.

Ultraportable Flow Cytometer Based on an All-Glass Microfluidic Chip

The flow cytometer has become a powerful and widely accepted measurement device in both biological studies and clinical diagnostics. The application of the flow cytometer in emerging point-of-care scenarios, such as instant detection in remote areas and emergency diagnosis, requires a significant reduction in physical dimension, cost, and power consumption. This requirement promotes studies to develop portable flow cytometers, mostly based on the utilization of polymer microfluidic chips. However, due to the relatively poor optical performance of polymer materials, existing microfluidic flow cytometers are incapable of accurate blood analysis, such as the four-part leukocyte differential count, which is necessary to monitor the immune system and to assess the risk of allergic inflammation or viral infection. To address this issue, an ultraportable flow cytometer based on an all-glass microfluidic chip (AG-UFCM) has been developed in this study. Compared with that of a typical commercial flow cytometer (BD FACSAria III), the volume of the AG-UFCM was reduced by 90 times (from 720 to 8 L). A two-step laser processing was employed to fabricate an all-glass microfluidic chip with a surface roughness of less than 1 nm, significantly improving the optical performance of on-chip micro-lens. The signal-to-noise ratio was enhanced by 3 dB, compared with that of polymer materials. For the first time, a four-part leukocyte differential count based on single fluorescence staining was realized using a miniaturized flow cytometer, laying a foundation for the point-of-care testing of miniaturized flow cytometers.

Traditional vs. Microfluidic Synthesis of ZnO Nanoparticles

Microfluidics provides a precise synthesis of micro-/nanostructures for various applications, including bioengineering and medicine. In this review article, traditional and microfluidic synthesis methods of zinc oxide (ZnO) are compared concerning particle size distribution, morphology, applications, reaction parameters, used reagents, and microfluidic device materials. Challenges of traditional synthesis methods are reviewed in a manner where microfluidic approaches may overcome difficulties related to synthesis precision, bulk materials, and reproducibility.

Numerical simulation and optimization of AC electrothermal microfluidic biosensor for COVID-19 detection through Taguchi method and artificial network

Microfluidic biosensors have played an important and challenging role for the rapid detection of the new severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2). Previous studies have shown that the kinetic binding reaction of the target antigen is strongly affected by process parameters. The purpose of this research was to optimize the performance of a microfluidic biosensor using two different approaches: Taguchi optimization and artificial neural network (ANN) optimization. Taguchi L8(2⁵) orthogonal array involving eight groups of experiments for five key parameters, which are microchannel shape, biosensor position, applied alternating current voltage, adsorption constant, and average inlet flow velocity, at two levels each, are performed to minimize the detection time of a biosensor excited by an alternating current electrothermal force. Signal to noise ratio ( S / N ) and analysis of variance were used to reach the optimal levels of process parameters and to demonstrate their percentage contributions, in terms of improved device response time. The principal results of this study showed that the Taguchi method was able to identify that the kinetic adsorption rate is the most influential parameter at 93% contribution, and the reaction surface position is the least influential parameter at 0.07% contribution. Also, the ANN model was able to accurately predict the optimal input values with a very low prediction error. Overall, the major conclusion of this study is both the Taguchi and ANN approaches can be effectively utilized to optimize the performance of a microfluidic biosensor. These advances have the potential to revolutionize the field of biosensing.

Non-fouling flow reactors for nanomaterial synthesis

This review provides a holistic description of flow reactor fouling for wet-chemical nanomaterial syntheses. Fouling origins and consequences are discussed together with the variety of flow reactors for its prevention.

Controlled Transport of Magnetic Particles and Cells Using C-Shaped Magnetic Thin Films in Microfluidic Chips

Single-cell analysis is an emerging discipline that has shown a transformative impact in cell biology in the last decade. Progress in this field requires systems capable of accurately moving the cells and particles in a controlled manner. Here, we present a microfluidic platform equipped with C-shaped magnetic thin films to precisely transport magnetic particles in a tri-axial rotating magnetic field. This innovative system, compared to the other rivals, offers numerous advantages. The magnetic particles repel each other to prevent undesired cluster formation. Many particles move synced with the external rotating magnetic field, which results in highly parallel controlled particle transport. We show that the particle transport in this system is analogous to electron transport and Ohm's law in electrical circuits. The proposed magnetic transport pattern is carefully studied using both simulations and experiments for various parameters, including the magnetic field characteristics, particle size, and gap size in the design. We demonstrate the appropriate transport of both magnetic beads and magnetized living cells. We also show a pilot mRNA-capturing experiment with barcode-carrying magnetic beads. The introduced chip offers fundamental potential applications in the fields of single-cell biology and bioengineering.

Salim R, Razali A. Reduced Graphene Oxide Functionalized Magnetic Nanocomposites for Environmental Pollutant Removal

Nowadays, the excessive and uncontrolled discharge of chemicals are imposing major health threats. The demands for clean and safe water amplifies the need to develop improved technologies for environmental contaminant removal. Considering the limitations of conventional methods for contaminants removal, we have prepared magnetic iron oxide nanoparticles functionalised with reduced graphene oxide as a potential material for environmental pollutants removal. The magnetic properties in potential adsorbent materials are highly desirable due to several advantages. Among which are their large adsorptive surface area, low diffusion resistance, high adsorption capacity and fast separation in large volumes of solution. The surface functionalised magnetic iron oxide nanoparticles (MNP) were fabricated using a one-pot hydrothermal method by adding reduced graphene oxide (rGO) into the reaction system. The graphene oxide were reduced prior to the addition in the hydrothemal decomposition step. The resultant rGO-MNP nanocomposites were characterised using FT-IR, SEM and VSM to investigate the functional groups, morphology and magnetic properties, resepectively. We also demonstrated the potential of the hybridised magnetic material with hydrophobic reduced graphene oxide for environmental pollutant removal.

Three-dimensional close-to-substrate trajectories of magnetic microparticles in dynamically changing magnetic field landscapes

The transport of magnetic particles (MPs) by dynamic magnetic field landscapes (MFLs) using magnetically patterned substrates is promising for the development of Lab-on-a-chip (LOC) systems. The inherent close-to-substrate MP motion is sensitive to changing particle-substrate interactions. Thus, the detection of a modified particle-substrate separation distance caused by surface binding of an analyte is expected to be a promising probe in analytics and diagnostics. Here, we present an essential prerequisite for such an application, namely the label-free quantitative experimental determination of the three-dimensional trajectories of superparamagnetic particles (SPPs) transported by a dynamically changing MFL. The evaluation of defocused SPP images from optical bright-field microscopy revealed a "hopping"-like motion of the magnetic particles, previously predicted by theory, additionally allowing a quantification of maximum jump heights. As our findings pave the way towards precise determination of particle-substrate separations, they bear deep implications for future LOC detection schemes using only optical microscopy.

Biosensors and Drug Delivery in Oncotheranostics Using Inorganic Synthetic and Biogenic Magnetic Nanoparticles

Magnetic nanocarriers have attracted attention in translational oncology due to their ability to be employed both for tumor diagnostics and therapy. This review summarizes data on applications of synthetic and biogenic magnetic nanoparticles (MNPs) in oncological theranostics and related areas. The basics of both types of MNPs including synthesis approaches, structure, and physicochemical properties are discussed. The properties of synthetic MNPs and biogenic MNPs are compared with regard to their antitumor therapeutic efficiency, diagnostic potential, biocompatibility, and cellular toxicity. The comparative analysis demonstrates that both synthetic and biogenic MNPs could be efficiently used for cancer theranostics, including biosensorics and drug delivery. At the same time, reduced toxicity of biogenic particles was noted, which makes them advantageous for in vivo applications, such as drug delivery, or MRI imaging of tumors. Adaptability to surface modification based on natural biochemical processes is also noted, as well as good compatibility with tumor cells and proliferation in them. Advances in the bionanotechnology field should lead to the implementation of MNPs in clinical trials.

Analytical Modeling of a New Compliant Microsystem for Atherectomy Operations

This work offers a new alternative tool for atherectomy operations, with the purpose of minimizing the risks for the patients and maximizing the number of clinical cases for which the system can be used, thanks to the possibility of scaling its size down to lumen reduced to a few tenths of mm. The development of this microsystem has presented a certain theoretical work during the kinematic synthesis and the design stages. In the first stage a new multi-loop mechanism with a Stephenson’s kinematic chain (KC) was found and then adopted as the so-called pseudo-rigid body mechanism (PRBM). Analytical modeling was necessary to verify the synthesis requirements. In the second stage, the joint replacement method was applied to the PRBM to obtain a corresponding and equivalent compliant mechanism with lumped compliance. The latter presents two loops and six elastic joints and so the evaluation of the microsystem mechanical advantage (MA) had to be calculated by taking into account the accumulation of elastic energy in the elastic joints. Hence, a new closed form expression of the microsystem MA was found with a method that presents some new aspects in the approach. The results obtained with Finite Element Analysis (FEA) were compared to those obtained with the analytical model. Finally, it is worth noting that a microsystem prototype can be fabricated by using MEMS Technology classical methods, while the microsystem packaging could be a further development for the present investigation.

Magnetophoretic capacitors for storing single particles and magnetized cells in microfluidic devices

Precise positioning of magnetic particles and magnetized cells in lab-on-a-chip systems has attracted broad attention. Recently, drawing inspiration from electrical circuits, we have demonstrated a magnetic particle transport platform composed of patterned magnetic thin films in a microfluidic environment, which accurately moves the particles and single cells to specific spots, called capacitors. However, we have made no prior attempts to optimize the capacitor geometry. Here, we carefully analyze various design parameters and their effect on capacitor operation. We run simulations based on finite element methods and stochastic numerical analysis using our semi-analytical model. We then perform the required experiments to study the loading efficiency of capacitors with different geometries for magnetic particles of multiple sizes. Our experimental results agree well with the design criteria we developed based on our simulation results. We also show the capability of designed capacitors in storing the magnetically labeled cells and illustrate using them in a pilot drug screening application. These results are directly applicable to the design of robust platforms capable of transporting and assembling a large number of single particles and single cells in arrays, which are useful in the emerging field of single-cell analysis.

Preparation and characterization of polymyxin B- and histidine-coupled magnetic nanoparticles for purification of biologics from acquired endotoxin contamination

Background

Endotoxin is a major process-related impurity that can act as a strong immunostimulant leading to fever and hypotensive shock. Thus, the US FDA and international quality standards strictly direct the biologics manufacturers to control the endotoxin contamination during the purification process. In this work, a developed method for biologics purification from acquired endotoxin contamination is introduced. This is accomplished by the preparation of dextran-coated magnetic nanoparticles using a facile rapid co-precipitation method.

Results

The resulting magnetic nanoparticles (MNPs) are characterized by dynamic light scattering, transmission electron microscope, Fourier transform infrared spectroscopy, X-ray diffraction, and vibrating sample magnetometry. The dextran-coated magnetic nanoparticles are further coupled to either polymyxin B or histidine to provide a positively charged ligand which enhances the affinity to the negatively charged endotoxin. Both ligands-coupled MNPs are tested for purification efficiency using the chromogenic kinetic assay. The method conditions are optimized using a two-level factorial design to achieve best purification conditions of the contaminated biologics and indicated endotoxin removal percentage 85.12% and maximum adsorption capacity of 38.5 mg/g, for histidine-coupled MNPs.

Conclusions

This developed method is introduced to serve biologics manufacturers to improve their manufacturing processes through providing a simple purifying tool for biologics from acquired endotoxin contamination.

Graphical Abstract

Fabrication of Maize-Based Nanoparticles at Home: A Research-Based Learning Activity

Nanotechnology is an interdisciplinary field that promises to reshape many spheres of our lives. One core activity in nanotechnology is the synthesis of nanoparticles. Here, we introduce a research-based activity centered on the use of zein, the main constitutive protein in maize, as a raw material for the synthesis of nanoparticles. In the context of the contingency imposed by COVID-19, this experimental activity was designed to be independent of a central laboratory. Therefore, it was enabled by a portable heating do-it-yourself (DIY) device that the students assembled in their own home. We describe the implementation of this activity as part of a graduate-level seminar series, and share our observations. We assessed the students’ knowledge on seven topics related to nanotechnology, do-it-yourself devices, and protein synthesis. The students appeared to perceive that their degree of knowledge had advanced (on average) in all the learning topics; the students stated that their degree of knowledge in the topics of assembly of devices and protein structure had advanced the most. The results of this assessment suggest that this simple, hands-on, research-based activity effectively engaged students in a learning process that allowed them to integrate knowledge while exercising their experimental skills. In addition, we show that these types of activities are suitable for implementation even in circumstances of restricted access to laboratory facilities, such as the ones recently experienced during the pandemic.

High-throughput precise particle transport at single-particle resolution in a three-dimensional magnetic field for highly sensitive bio-detection

Precise manipulation of microparticles have fundamental applications in the fields of lab-on-a-chip and biomedical engineering. Here, for the first time, we propose a fully operational microfluidic chip equipped with thin magnetic films composed of straight tracks and bends which precisely transports numerous single-particles in the size range of ~ 2.8–20 µm simultaneously, to certain points, synced with the general external three-axial magnetic field. The uniqueness of this design arises from the introduced vertical bias field that provides a repulsion force between the particles and prevents unwanted particle cluster formation, which is a challenge in devices operating in two-dimensional fields. Furthermore, the chip operates as an accurate sensor and detects low levels of proteins and DNA fragments, being captured by the ligand-functionalized magnetic beads, while lowering the background noise by excluding the unwanted bead pairs seen in the previous works. The image-processing detection method in this work allows detection at the single-pair resolution, increasing the sensitivity. The proposed device offers high-throughput particle transport and ultra-sensitive bio-detection in a highly parallel manner at single-particle resolution. It can also operate as a robust single-cell analysis platform for manipulating magnetized single-cells and assembling them in large arrays, with important applications in biology.

Ferrofluids and bio-ferrofluids: looking back and stepping forward

Ferrofluids investigated along for about five decades are ultrastable colloidal suspensions of magnetic nanoparticles, which manifest simultaneously fluid and magnetic properties. Their magnetically controllable and tunable feature proved to be from the beginning an extremely fertile ground for a wide range of engineering applications. More recently, biocompatible ferrofluids attracted huge interest and produced a considerable increase of the applicative potential in nanomedicine, biotechnology and environmental protection. This paper offers a brief overview of the most relevant early results and a comprehensive description of recent achievements in ferrofluid synthesis, advanced characterization, as well as the governing equations of ferrohydrodynamics, the most important interfacial phenomena and the flow properties. Finally, it provides an overview of recent advances in tunable and adaptive multifunctional materials derived from ferrofluids and a detailed presentation of the recent progress of applications in the field of sensors and actuators, ferrofluid-driven assembly and manipulation, droplet technology, including droplet generation and control, mechanical actuation, liquid computing and robotics.

New insights for integration of nano particle with microfluidic systems for sensor applications

A biosensor is a compact device, which utilizes biological derived recognition component, immobilized on a transducer to analyze an analyte. Nanoparticles with their unique chemical and physical properties are versatile in their applications to develop as sensors. Different nanoparticles play different roles in the sensing systems like metal and metal oxide nanoparticles. The application of Gold, Silver and Copper nanoparticles will be discussed in brief. The nanoparticles typically function as substrates for immobilization of biomolecules, as catalytic agent, electron transfer agent between electrode surface and the biomolecules, and as reactants. Microfluidic deals with manipulating very small volumes of fluids (micro and nanoliters). This miniaturized platform enhances control of flow conditions and mixing rate of fluids. The microfluidics improves the sensitivity of the analysis, and reduces the volumes of sample and reagent in the analysis. The review specifically aims at representing microfluidics-based sensors and nanoparticle based sensors. This review will also focus on probable merger of these two fields to take advantage of both the fields and this will help in pushing the boundaries of these fields further more.

A novel magnetophoretic-based device for magnetometry and separation of single magnetic particles and magnetized cells

The use of magnetic micro- and nanoparticles in medicine and biology is expanding. One important example is the transport of magnetic microparticles and magnetized cells in lab-on-a-chip systems. The magnetic susceptibility of the particles is a key factor in determining their response to the externally applied magnetic field. Typically, to measure this parameter, their magnetophoretic mobility is studied. However, the particle tracking system for accurately determining the traveled distance in a certain time may be too complicated. Here, we introduce a lithographically fabricated chip composed of an array of thin magnetic micro-disks for evaluating the magnetic susceptibility of numerous individual magnetic particles simultaneously. The proposed novel magnetometer works based on the phase change in the trajectory of microparticles circulating around the disks in a rotating in-plane magnetic field. We explain that the easily detectable transition between the "phase-locked" and the "phase-slipping" regimes and the frequency at which it happens are appropriate parameters for measuring the magnetic susceptibility of the magnetic particles at the single-particle level. We show that this high-throughput (i.e., ∼ten thousand particles on a 1 cm² area) single-particle magnetometry method has various crucial applications, including i) magnetic characterization of magnetic beads as well as magnetically labeled living cells, ii) determining the magnetization rate of the cells taking up magnetic nanoparticles with respect to time, iii) evaluating the rate of degradation of magnetic nanoparticles in cells over time, iv) detecting the number of target cells in a sample, and v) separating particles based on their size and magnetic susceptibility.

Advances in Magnetic Nanoparticles Engineering for Biomedical Applications-A Review

Magnetic iron oxide nanoparticles (MNPs) have been developed and applied for a broad range of biomedical applications, such as diagnostic imaging, magnetic fluid hyperthermia, targeted drug delivery, gene therapy and tissue repair. As one key element, reproducible synthesis routes of MNPs are capable of controlling and adjusting structure, size, shape and magnetic properties are mandatory. In this review, we discuss advanced methods for engineering and utilizing MNPs, such as continuous synthesis approaches using microtechnologies and the biosynthesis of magnetosomes, biotechnological synthesized iron oxide nanoparticles from bacteria. We compare the technologies and resulting MNPs with conventional synthetic routes. Prominent biomedical applications of the MNPs such as diagnostic imaging, magnetic fluid hyperthermia, targeted drug delivery and magnetic actuation in micro/nanorobots will be presented.

Rapid and Sensitive Inhibitor Screening Using Magnetically Modulated Biosensors

Inhibitor screening is an important tool for drug development, especially during the COVID-19 pandemic. The most used in vitro inhibitor screening tool is an enzyme-linked immunosorbent assay (ELISA). However, ELISA-based inhibitor screening is time consuming and has a limited dynamic range. Using fluorescently and magnetically modulated biosensors (MMB), we developed a rapid and sensitive inhibitor screening tool. This study demonstrates its performance by screening small molecules and neutralizing antibodies as potential inhibitors of the interaction between the spike protein 1 (S1) of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and the angiotensin-converting enzyme 2 (ACE2) receptor. The MMB-based assay is highly sensitive, has minimal non-specific binding, and is much faster than the commonly used ELISA (2 h vs. 7–24 h). We anticipate that our method will lead to a remarkable advance in screening for new drug candidates.