Recent Advances of Optical Sensors for Copper Ion Detection

A series of anthracene-derived dyes for Cu2+-assisted CO sensing and bio-imaging: synthesis, performance, and mechanism

Endogenous CO acts as an important messenger for signal transduction and therapeutic effect in the human body. Fluorescent imaging appears to be a promising method for endogenous CO recognition, but traditional luminescent probes based on Pd-complexes suffered from defects of high cost. In this work, four anthracene-derived dyes having an = N-N = group were synthesized for Cu2+-assisted CO sensing. Their molecular structure, photophysical performance and spectral response to Cu2+ and CO were analyzed in detail. The optimal probe showed good selectivity and quenching effect to Cu2+, with PLQY (photoluminescence quantum yield) decreased from 0.33 to 0.04. The quenching mechanism was found as a static quenching mechanism by forming a non-fluorescent complex with Cu2+ (stoichiometric ratio = 1:1), as revealed by single crystal, EPR (electron paramagnetic resonance), and XPS (X-ray photoelectron spectroscopy) analysis. Such quenching effect could be reversed by CO, showing recovered fluorescence, with PLQY recovered to 0.32 within 328 s. Discussion on cellular endogenous CO imaging was included as well.

Transforming bio-waste lignin into amine functionalized carbon quantum dots for selective detection of trace Cu2+ in aqueous system

Developing carbon quantum dots (CQDs) from bio-waste lignin for effectively detecting Cu2+ is of great significance for promoting the value-added utilization of lignin resources. However, the limited amount of surface-active groups and low quantum yield of lignin-based CQDs hinder their application in this regard. Herein, bio-waste lignin was converted into value-added amine functionalized CQDs using a facile two-step hydrothermal approach. The as-synthesized CQDs modified with amino groups exhibit bright green fluorescence, abundant surface functional groups, high water solubility and uniform particle size (3.9 nm). Systematic analysis demonstrates that the rich NH2 groups (~12.3 %) on the CQDs backbone improve their fluorescence properties (quantum yield increased from 3.4 % to 21.1 %) and specific detection ability for Cu2+. The developed NH2-CQDs serve as an efficient fluorescent probe, displaying high sensitivity and selectivity towards Cu2+ in aqueous system, with a detection limit of 2.42 μmol/L, which is lower than the maximum permitted amount of Cu2+ in drinking water (20 μmol/L). The detection mechanism of NH2-CQDs for Cu2+ is attributed to the synergy of static quenching and photo-induced electron transfer. This study provides a valuable reference for the synthesis of high-quality fluorescent CQDs from lignin resources and the effective detection of trace Cu2+ in aquatic environments.

Cu(II) detection by a fluorometric probe based on thiazoline-amidoquinoline derivative and its application to water and food samples

Two novel fluorescent probes for Cu2+ detection have been developed based on thiazoline-quinoline conjugates bearing a 4-ethynyl-N,N-dimethylaniline unit (QT1 and QT2). QT2 exhibits instantaneous fluorescence quenching of Cu2+ with an emissive change from bright orange to arctic blue under UV light irradiation (365 nm). The plots of I0/I against Cu2+ concentrations show a good linear relationship that ranges from 0 to 50 µM with a coefficient of determination (R2) = 0.9906 and a limit of detection (LOD) of 76 nM, which is considered low (4.84 ppb). A 1:1 complexation between QT2 and Cu2+ was confirmed by UV-Vis titration, ESI-MS, and SC-XRD. The QT2·Cu2+ complex was dissociated by the addition of EDTA. The fluorescence quenching mechanism involves the ligand-to-metal charge transfer (LMCT) of a paramagnetic Cu2+ complex. The QT2 probe on a paper-based strip was used to determine the amount of Cu2+ in water and food samples (shiitake mushrooms and oysters).

Biosensing Platforms for Cardiac Biomarker Detection

Myocardial infarction (MI) is a cardiovascular disease that occurs when there is an elevated demand for myocardial oxygen as a result of the rupture or erosion of atherosclerotic plaques. Globally, the mortality rates associated with MI are steadily on the rise. Traditional diagnostic biomarkers employed in clinical settings for MI diagnosis have various drawbacks, prompting researchers to investigate fast, precise, and highly sensitive biosensor platforms and technologies. Biosensors are analytical devices that combine biological elements with physicochemical transducers to detect and quantify specific compounds or analytes. These devices play a crucial role in various fields including healthcare, environmental monitoring, food safety, and biotechnology. Biosensors developed for the detection of cardiac biomarkers are typically electrochemical, mass, and optical biosensors. Nanomaterials have emerged as revolutionary components in the field of biosensing, offering unique properties that significantly enhance the sensitivity and specificity of the detection systems. This review provides a comprehensive overview of the advancements and applications of nanomaterial-based biosensing systems. Beginning with an exploration of the fundamental principles governing nanomaterials, we delve into their diverse properties, including but not limited to electrical, optical, magnetic, and thermal characteristics. The integration of these nanomaterials as transducers in biosensors has paved the way for unprecedented developments in analytical techniques. Moreover, the principles and types of biosensors and their applications in cardiovascular disease diagnosis are explained in detail. The current biosensors for cardiac biomarker detection are also discussed, with an elaboration of the pros and cons of existing platforms and concluding with future perspectives.

Emerging trends in sensors based on molecular imprinting technology: Harnessing smartphones for portable detection and recognition

Molecular imprinting technology (MIT) has become a promising recognition technology in various fields due to its specificity, high efficiency, stability and eco-friendliness in the recognition of target. Molecularly imprinted polymers (MIPs), known as 'artificial receptors', are shown similar properties to natural receptors as a biomimetic material. The selectivity of recognition for targets can be greatly improved when MIPs are introduced into sensors, as known that MIPs, are suitable for the pretreatment and analysis of trace substances in complex matrix samples. At present, various sensors has been developed by the combination with MIPs for detecting and identifying trace compounds, biological macromolecules or other substances, such as optical, electrochemical and piezoelectric sensors. Smart phones, with their built-in sensors and powerful digital imaging capabilities, provide a unique platform for the needs of portability and instant detection. MIP sensors based on smart phones are expected to become a new research direction in the future. This review discusses the latest applications of MIP sensors in the field of detection and recognition in recent years, summarizes the frontier progress of MIP sensor research based on smart phones in the past two years, and points out the challenges, limitations and future development prospects.

Fluorogen-Functionalized Mesoporous Silica Hybrid Sensing Materials: Applications in Cu2+ Detection

Since Cu2+ ions play a pivotal role in both ecosystems and human health, the development of a rapid and sensitive method for Cu2+ detection holds significant importance. Fluorescent mesoporous silica materials (FMSMs) have garnered considerable attention in the realm of chemical sensing, biosensing, and bioimaging due to their distinctive structure and easily functionalized surfaces. As a result, numerous Cu2+ sensors based on FMSMs have been devised and extensively applied in environmental and biological Cu2+ detection over the past few decades. This review centers on the recent advancements in the methodologies for preparing FMSMs, the mechanisms underlying sensing, and the applications of FMSMs-based sensors for Cu2+ detection. Lastly, we present and elucidate pertinent perspectives concerning FMSMs-based Cu2+ sensors.

Progress in appended calix[4]arene-based receptors for selective recognition of copper ions

In the past two decades, there has been significant progress in the design and development of synthetic receptors for molecular recognition as they find application in the field of chemical, biological, medical, and environmental sciences. Synthetic receptors based on calix systems appended with fluorogenic and chromogenic groups have gained considerable attention for sensing and recognition of ions and molecules. Copper (Cu2+) is an essential element required in trace amounts in all living organisms to carry out various biological processes. The aim of this review is to summarize advancement in π-conjugated fluorogenic and chromogenic groups appended to calix[4]arene motifs for detection and quantitation of Cu2+ ion. The focus is to present a comprehensive account of extended calix[4]arene systems with different linkers and highlight the unique design and binding characteristics for the recognition and sensing of Cu2+ ions.

Progress in optical sensors-based uric acid detection

The escalating number of patients affected by various diseases, such as gout, attributed to abnormal uric acid (UA) concentrations in body fluids, has underscored the need for rapid, efficient, highly sensitive, and stable UA detection methods and sensors. Optical sensors have garnered significant attention due to their simplicity, cost-effectiveness, and resistance to electromagnetic interference. Notably, research efforts have been directed towards UA on-site detection, enabling daily monitoring at home and facilitating rapid disease screening in the community. This review aims to systematically categorize and provide detailed descriptions of the notable achievements and emerging technologies in UA optical sensors over the past five years. The review highlights the advantages of each sensor while also identifying their limitations in on-site applications. Furthermore, recent progress in instrumentation and the application of UA on-site detection in body fluids is discussed, along with the existing challenges and prospects for future development. The review serves as an informative resource, offering technical insights and promising directions for future research in the design and application of on-site optical sensors for UA detection.

A colorimetric and fluorometric dual-mode probe for Cu2+detection based on functionalized silver nanoparticles

A novel colorimetric/fluorescent probe (AgNPs-GSH-Rh6G2) was prepared by linking silver nanoparticles (AgNPs) with rhodamine 6G derivative (Rh6G2) using glutathione (GSH) as a linker molecule. The prepared probe showed obvious fluorescence change and colorimetric response after adding copper ions. Based on this phenomenon, a colorimetric/fluorescence dual-mode detection method was constructed to recognize copper ions. The linear ranges of fluorescence detection and colorimetric detection were 0.10 to 0.45 mM and 0.15 to 0.65 mM, respectively, and the limit of detection were 0.18 μM and 24.90 μΜ. In addition, the dual-mode probe has achieved satisfactory results in the detection of copper ions in sediment samples. The successful construction of AgNPs-GSH-Rh6G2 not only provide a reliable tool for the detection of copper ions, but also shed light on a new idea for the multi-mode development of the detection platform.

Advances in Portable Heavy Metal Ion Sensors

Heavy metal ions, one of the major pollutants in the environment, exhibit non-degradable and bio-chain accumulation characteristics, seriously damage the environment, and threaten human health. Traditional heavy metal ion detection methods often require complex and expensive instruments, professional operation, tedious sample preparation, high requirements for laboratory conditions, and operator professionalism, and they cannot be widely used in the field for real-time and rapid detection. Therefore, developing portable, highly sensitive, selective, and economical sensors is necessary for the detection of toxic metal ions in the field. This paper presents portable sensing based on optical and electrochemical methods for the in situ detection of trace heavy metal ions. Progress in research on portable sensor devices based on fluorescence, colorimetric, portable surface Raman enhancement, plasmon resonance, and various electrical parameter analysis principles is highlighted, and the characteristics of the detection limits, linear detection ranges, and stability of the various sensing methods are analyzed. Accordingly, this review provides a reference for the design of portable heavy metal ion sensing.

Electrochemical and Optical Sensors for the Detection of Chemical Carcinogens Causing Leukemia

The incidence and mortality due to neoplastic diseases have shown an increasing tendency over the years. Based on GLOBOCAN 2020 published by the International Agency for Research on Cancer (IARC), leukemias are the thirteenth most commonly diagnosed cancer in the world, with 78.6% of leukemia cases diagnosed in countries with a very high or high Human Development Index (HDI). Carcinogenesis is a complex process initiated by a mutation in DNA that may be caused by chemical carcinogens present in polluted environments and human diet. The IARC has identified 122 human carcinogens, e.g., benzene, formaldehyde, pentachlorophenol, and 93 probable human carcinogens, e.g., styrene, diazinone. The aim of the following review is to present the chemical carcinogens involved or likely to be involved in the pathogenesis of leukemia and to summarize the latest reports on the possibility of detecting these compounds in the environment or food with the use of electrochemical sensors.

Naphthalimide-Piperazine Derivatives as Multifunctional "On" and "Off" Fluorescent Switches for pH, Hg2+ and Cu2+ Ions

Novel 1,8-naphthalimide-based fluorescent probes NI-1 and NI-2 were designed and screened for use as chemosensors for detection of heavy metal ions. Two moieties, methylpyridine (NI-1) and hydroxyphenyl (NI-2), were attached via piperazine at the C-4 position of the napthalimide core resulting in a notable effect on their spectroscopic properties. NI-1 and NI-2 are pH sensitive and show an increase in fluorescence intensity at around 525 nm (switch "on") in the acidic environment, with pK_a values at 4.98 and 2.91, respectively. Amongst heavy metal ions only Cu²⁺ and Hg²⁺ had a significant effect on the spectroscopic properties. The fluorescence of NI-1 is quenched in the presence of either Cu²⁺ or Hg²⁺ which is attributed to the formation of 1:1 metal-ligand complexes with binding constants of 3.6 × 10⁵ and 3.9 × 10⁴, respectively. The NI-1 chemosensor can be used for the quantification of Cu²⁺ ions in sub-micromolar quantities, with a linear range from 250 nM to 4.0 μM and a detection limit of 1.5 × 10^-8 M. The linear range for the determination of Hg²⁺ is from 2 μM to 10 μM, with a detection limit of 8.8 × 10^-8 M. Conversely, NI-2 behaves like a typical photoinduced electron transfer (PET) sensor for Hg²⁺ ions. Here, the formation of a complex with Hg²⁺ (binding constant 8.3 × 10³) turns the green fluorescence of NI-2 into the "on" state. NI-2 showed remarkable selectivity towards Hg²⁺ ions, allowing for determination of Hg²⁺ concentration over a linear range of 1.3 μM to 25 μM and a limit of detection of 4.1 × 10^-7 M.