Effective Treatment of Acid Mine Drainage with Microbial Fuel Cells: An Emphasis on Typical Energy Substrates

A review of passive acid mine drainage treatment by PRB and LPB: From design, testing, to construction

An extensive volume of acid mine drainage (AMD) generated throughout the mining process has been widely regarded as one of the most catastrophic environmental problems. Surface water and groundwater impacted by pollution exhibit extreme low pH values and elevated sulfate and metal/metalloid concentrations, posing a serious threat to the production efficiency of enterprises, domestic water safety, and the ecological health of the basin. Over the recent years, a plethora of techniques has been developed to address the issue of AMD, encompassing nanofiltration membranes, lime neutralization, and carrier-microencapsulation. Nonetheless, these approaches often come with substantial financial implications and exhibit restricted long-term sustainability. Among the array of choices, the permeable reactive barrier (PRB) system emerges as a noteworthy passive remediation method for AMD. Distinguished by its modest construction expenses and enduring stability, this approach proves particularly well-suited for addressing the environmental challenges posed by abandoned mines. This study undertook a comprehensive evaluation of the PRB systems utilized in the remediation of AMD. Furthermore, it introduced the concept of low permeability barrier, derived from the realm of site-contaminated groundwater management. The strategies pertaining to the selection of materials, the physicochemical aspects influencing long-term efficacy, the intricacies of design and construction, as well as the challenges and prospects inherent in barrier technology, are elaborated upon in this discourse.

Enriching electroactive microorganisms from ferruginous lake waters - Mind the sulfate reducers!

Electroactive microorganisms are pivotal players in mineral transformation within redox interfaces characterized by pronounced oxygen and dissolved metal gradients. Yet, their systematic cultivation from such environments remains elusive. Here, we conducted an anodic enrichment using anoxic ferruginous waters from a post-mining lake as inoculum. Weak electrogenicity (j = ∼5 µA cm-2) depended on electroactive planktonic cells rather than anodic biofilms, with a preference for formate as electron donor. Addition of yeast extract decreased the lag phase but did not increase current densities. The enriched bacterial community varied depending on the substrate composition but mainly comprised of sulfate- and nitrate-reducing bacteria (e.g., Desulfatomaculum spp. and Stenotrophomonas spp.). A secondary enrichment strategy resulted in different bacterial communities composed of iron-reducing (e.g., Klebsiella spp.) and fermentative bacteria (e.g., Paeniclostridium spp.). Secondary electron microscopy and energy-dispersive X-ray spectroscopy results indicate the precipitation of sulfur- and iron-rich organomineral aggregates at the anode surface, presumably impeding current production. Our findings indicate that (i) anoxic waters containing geogenically derived metals can be used to enrich weak electricigens, and (ii) it is necessary to specifically inhibit sulfate reducers. Otherwise, sulfate reducers tend to dominate over EAM during cultivation, which can lead to anode passivation due to biomineralization.

High efficiency electrochemical separation of uranium(VI) from uranium-containing wastewater by microbial fuel cells with different cathodes

As an emerging versatile technology for separating uranium from uranium-containing wastewater (UCW), microbial fuel cell (MFC) offers a novel approach to UCW treatment. Its cathode is essential for the treatment of UCW. To thoroughly investigate the efficacy of MFC in treating UCW, investigations were conducted using MFCs with five materials (containing iron sheet (IP), stainless steel mesh (SSM), carbon cloth (CC), carbon brush (CB), and nickel foam (NF)) as cathodes. The results revealed that each MFC system performed differently in terms of carbon source degradation, uranium removal, and electricity production. In terms of carbon source degradation, CB-MFC showed the best performance. The best uranium removal method was NF-MFC, and the best electricity production method was carbon-based cathode MFC. Five MFC systems demonstrated stable performance and consistent difference over five cycles, with CC-MFC outperforming the others. Furthermore, SEM and XPS characterization of the cathode materials before and after the experiment revealed that a significant amount of U(IV) was generated during the uranium removal process, indicating that uranium ions were primarily removed by electrochemical reduction precipitation. This study confirmed that abiotic cathode MFC had a high UCW removal potential and served as a good guideline for obtaining the best cathode for MFC.

Effect of nickel (II) on the performance of anodic electroactive biofilms in bioelectrochemical systems

The impact of nickel (Ni²⁺) on the performance of anodic electroactive biofilms (EABs) in the bioelectrochemical system (BES) was investigated in this study. Although it has been reported that Ni²⁺ influences microorganisms in a number of ways, it is unknown how its presence in the anode of a BES affects extracellular electron transfer (EET) of EABs, microbial viability, and the bacterial community. Results revealed that the addition of Ni²⁺ decreased power output from 673.24 ± 12.40 mW/m² at 0 mg/L to 179.26 ± 9.05 mW/m² at 80 mg/L. The metal and chemical oxygen demand removal efficiencies of the microbial fuel cells (MFCs) declined as Ni²⁺ concentration increased, which could be attributed to decreased microbial viability as revealed by SEM and CLSM. FTIR analysis revealed the involvement of various microbial biofilm functional groups, including hydroxyl, amides, methyl, amine, and carboxyl, in the uptake of Ni²⁺. The presence of Ni²⁺ on the anodic biofilms was confirmed by SEM-EDS and XPS analyses. CV demonstrated that the electron transfer performance of the anodic biofilms was negatively correlated with the various Ni²⁺ concentrations. EIS showed that the internal resistance of the MFCs increased with increasing Ni²⁺ concentration, resulting in a decrease in power output. High-throughput sequencing results revealed a decrease in Geobacter and an increase in Desulfovibrio in response to Ni²⁺ concentrations of 10, 20, 40, and 80 mg/L. Furthermore, the various Ni²⁺ concentrations decreased the expression of EET-related genes. The Ni²⁺-fed MFCs had a higher abundance of the nikR gene than the control group, which was important for Ni²⁺ resistance. This work advances our understanding of Ni²⁺ inhibition on EABs, as well as the concurrent removal of organic matter and Ni²⁺ from wastewater.

A novel approach for treating acid mine drainage by forming schwertmannite driven by a combination of biooxidation and electroreduction before lime neutralization

Acid mine drainage (AMD) contains abundant iron, sulfates, and various metal ions, and it causes environmental pollution. The traditional AMD lime neutralization forms a layer of iron hydroxide and gypsum on the surface of the lime particles, preventing continuous reaction and leading to excessive lime addition and neutralized sludge production. In this study, an approach for treating AMD using a cyclic process of biooxidation and electroreduction before lime neutralization was proposed, in which the Fe²⁺ in AMD was oxidized to Fe³⁺ and induced to form schwertmannite through Acidithiobacillus ferrooxidans. The remaining Fe³⁺ was reduced to Fe²⁺ using an electric field. After three biooxidation and two electroreduction cycles, 98.2% of Fe and 62.4% of SO₄^2- in AMD precipitated as schwertmannite (Fe₈O₈(OH)_5.16(SO₄)_1.37). The yield of schwertmannite reached 33.98 g/L_AMD, with a high specific surface area of 112.59 m²/g. The lime dosage and sludge yield of the treated AMD in the subsequent neutralization stage (pH = 7.00) decreased by 85.0% and 74.5%, respectively, than those of raw AMD. The pilot test results showed that the integrated treatment of biooxidation-electroreduction cyclic mineralization and lime neutralization has practical applications.

Recovery of heavy metals from industrial wastewater using bioelectrochemical system inoculated with novel Castellaniella species

Water pollution is a global issue that has drastically increased in recent years due to rapid industrial development. Different technologies have been designed for the removal of pollutants from wastewater. However, most of these techniques are expensive, generate new waste, and focus solely on metal removal instead of metal recovery. In this study, novel facultative exoelectrogenic strains designated Castellaniella sp. A5, Castellaniella sp. B3, and Castellaniella sp. A3 were isolated from a microbial fuel cell (MFC). These isolates were utilized as pure and mixed culture inoculums in a bioelectrochemical system (BES) to produce bioelectricity and treat simulated industrial wastewater. A single-chamber MFC inoculated with the mixed culture attained the highest electricity generation (i.e., 320 mW/m² power density and 3.19 A/m² current density), chemical oxygen demand removal efficiency (91.15 ± 0.05%), and coulombic efficiency (54.81 ± 4.18%). In addition, the BES containing biofilms of the mixed culture achieved the highest Cu, Cr, and Cd removal efficiencies of 99.89 ± 0.07%, 99.59 ± 0.53%, and 99.91 ± 0.04%, respectively. The Cr⁶⁺ and Cu²⁺ in the simulated industrial wastewater were recovered via microbial electrochemical reduction as Cr³⁺ and Cu⁰, respectively. However, Cd²⁺ precipitated as Cd (OH)₂ or CdCO₃ on the surface of the cathodes. These results suggest that a mixed culture inoculum of Castellaniella sp. A5, Castellaniella sp. B3, and Castellaniella sp. A3 has great potential as a biocatalyst in BES for heavy metals recovery from industrial wastewater.

Study on the Bacterial Communities of the Biofilms on Titanium, Aluminum, and Copper Alloys at 5,772 m Undersea in Yap Trench

Biofilms formed on metal surfaces strongly affect metallic instruments serving in marine environments. However, due to sampling difficulty, less has been known about the bacterial communities of the biofilm on metallic surfaces in hadal environments, so the failure process of these deep-sea metallic instruments influenced by microbial communities could be hardly predicted. In this research, seven alloys, including titanium, aluminum, and copper alloys, were exposed in Yap Trench hadal environment for 1 year. Thus, the communities of the biofilms formed on metallic surfaces at 5,772 m undersea in Yap Trench were initially reported in previous studies. Then, 16S rRNA gene sequencing was performed to visualize the in situ bacterial communities of the biofilms formed on titanium, aluminum, and copper alloys at 5,772 m undersea in Yap Trench. It was found that Proteobacteria was the dominant phylum in all samples, but distinct genera were discovered on various alloys. The titanium alloy provided a suitable substrate for a mutualistic symbiotic biofilm with abundant bacterial richness. Aluminum alloys without copper components showed the least bacterial richness and formed a cold-adapted and oligotrophic-adapted biofilm containing the genera Sulfurimonas and PS1 Clade, while copper-present alloys showed relatively high bacterial richness with copper-resistant or even copper-utilizing biofilms constituting the genera Stenotrophomonas, Burkholderia-Caballeronia-Paraburkholderia, and Achromobacter on the surfaces. Furthermore, among all the element components contained in alloys investigated in this research, copper element showed the strongest influences on the composition and function of microbial communities in the biofilms formed on various metallic surfaces.

Enhancing microbial fuel cell performance using anode modified with Fe3O4 nanoparticles

Low electricity generation efficiency is one of the key issues that must be addressed for the practical application of microbial fuel cells (MFCs). Modification of microbial electrode materials is an effective method to enhance electron transfer. In this study, magnetite (Fe₃O₄) nanoparticles synthesized by co-precipitation were added to anode chambers in different doses to explore its effect on the performance of MFCs. The maximum power density of the MFCs doped with 4.5 g/L Fe₃O₄ (391.11 ± 9.4 mW/m²) was significantly increased compared to that of the undoped MFCs (255.15 ± 24.8 mW/m²). The COD removal efficiency of the MFCs increased from 85.8 ± 2.8% to 95.0 ± 2.1%. Electrochemical impedance spectroscopy and cyclic voltammetry tests revealed that the addition of Fe₃O₄ nanoparticles enhanced the biocatalytic activity of the anode. High-throughput sequencing results indicated that 4.5 g/L Fe₃O₄ modified anodes enriched the exoelectrogen Geobacter (31.5%), while control MFCs had less Geobacter (17.4%). Magnetite is widely distributed worldwide, which provides an inexpensive means to improve the electrochemical performance of MFCs.

Addition of organic acids to acid mine drainage polluted wetland sediment leads to microbial community structure and functional changes and improved water quality

Acid mine drainage (AMD) is a serious environmental problem worldwide that requires efficient and sustainable remediation technologies including the use of biological mechanisms. A key challenge for AMD bioremediation is to provide optimal conditions for microbial-mediated immobilisation of trace metals. Although organic carbon and oxygen can enhance treatment efficiency, the effect on microbial communities is unclear. In this study, surface sediments from a natural wetland with proven efficiency for AMD bioremediation were artificially exposed to oxygen (by aeration) and/or organic carbon (in the form of mixed organic acids) and incubated under laboratory conditions. In addition to measuring changes in water chemistry, a metagenomics approach was used to determine changes in sediment bacterial, archaeal and fungal community structure, and functional gene abundance. The addition of organic carbon produced major changes in the abundance of microorganisms related to iron and sulfur metabolism (including Geobacter and Pelobacter) and increased levels of particulate metals via sulfate reduction. Aeration resulted in an increase in Sideroxydans abundance but no significant changes in metal chemistry were observed. The study concludes that the utilisation of organic carbon by microorganisms is more important for achieving efficient AMD treatment than the availability of oxygen, yet the combination of oxygen with organic carbon addition did not inhibit the improvements to water quality.

Performance and Mechanisms of PropS-SH/HA Coatings in the Inhibition of Pyrite Oxidation

Acid mine drainage (AMD) entering the environment will cause long-term environmental pollution and ecological damage, the treatment or remediation for which has become a difficult worldwide problem. To control AMD at the source, a novel composite coating, hydroxyapatite (HA) as the filler embedded in a γ-mercaptopropyltrimethoxysilane (PropS-SH) coating, was introduced in this study. The performance and mechanisms of PropS-SH/HA coatings in the inhibition of pyrite oxidation were investigated by chemical leaching testing and material structure characterization. The results of the investigations revealed that the addition of an appropriate amount of HA can enhance the passivation efficiency of the PropS-SH coating. The best coating was obtained from 3% (v/v) of PropS-SH solution with 16 wt % HA, as this coating decreased pyrite oxidation by 78.7% (based on total Fe release). The main mechanism of PropS-SH/HA for the inhibition of pyrite oxidation involved the generation of a PropS-SH network through a polycondensation reaction. The addition of HA increased the stability of the passivation film composed of PropS-SH as well as the combining capacity of PropS-SH/HA through the formation of Si-O-Si and Fe-O-Si bonds, respectively.

An Old Technique with A Promising Future: Recent Advances in the Use of Electrodeposition for Metal Recovery

Although the first published works on electrodeposition dates from more than one century ago (1905), the uses of this technique in the recovery of metals are attracting an increasing interest from the scientific community in the recent years. Moreover, the intense use of metals in electronics and the necessity to assure a second life of these devices in a context of circular economy, have increased the interest of the scientific community on electrodeposition, with almost 3000 works published per year nowadays. In this review, we aim to revise the most relevant and recent publications in the application of electrodeposition for metal recovery. These contributions have been classified into four main groups of approaches: (1) treatment and reuse of wastewater; (2) use of ionic liquids; (3) use of bio-electrochemical processes (microbial fuel cells and microbial electrolysis cells) and (4) integration of electrodeposition with other processes (bioleaching, adsorption, membrane processes, etc.). This would increase the awareness about the importance of the technology and would serve as a starting point for anyone that aims to start working in the field.

Editorial for Special Issue “Novel and Emerging Strategies for Sustainable Mine Tailings and Acid Mine Drainage Management”

Climate change is one of the most pressing problems facing humanity this century [...]

Inhibition of pyrite oxidation using PropS-SH/sepiolite composite coatings for the source control of acid mine drainage

Pyrite, as one of the most abundant sulfide minerals, can be easily oxidized to generate acid mine drainage (AMD). In the present study, a new composite passivator named PropS-SH/sepiolite (PSPT) using γ-mercaptopropyltrimethoxysilane (PropS-SH) as the main passivator and natural sepiolite particles as filler was fabricated and used to suppress the oxidation of pyrite. Electrochemical tests and chemical leaching experiments were carried out to evaluate the passivation performance of PSPT coatings with different amount of sepiolite particles on pyrite oxidation. The results showed that the addition of appropriate sepiolite could significantly improve the inhibition ability of PropS-SH against pyrite oxidation. However, excessive addition of sepiolite particles weakened the inhibition ability of the PSPT coatings owing to aggregations of sepiolite. Additionally, the coating mechanism of PSPT on pyrite was also proposed based on the characterization of FTIR, XPS, and ²⁹SiNMR measurements, which indicated that sepiolite particles could be embedded in PropS-SH network through oxygen bridges, thus improving the stability of the composite coatings.