Performance Evaluation of Fe-Al Bimetallic Particles for the Removal of Potentially Toxic Elements from Combined Acid Mine Drainage-Effluents from Refractory Gold Ore Processing

Effects of acid mine drainage and sediment contamination on soil bacterial communities, interaction patterns, and functions in alkaline desert grassland

Acid mine drainage and sediments (AMD-Sed) contamination pose serious ecological and environmental problems. This study investigated the geochemical parameters and bacterial communities in the sediment layer (A) and buried soil layer (B) of desert grassland contaminated with AMD-Sed and compared them to an uncontaminated control soil layer (CK). The results showed that soil pH was significantly lower and iron, sulfur, and electroconductivity levels were significantly higher in the B layer compared to CK. A and B were dominated by Proteobacteria and Actinobacteriota, while CK was dominated by Firmicutes and Bacteroidota. The pH, Fe, S, and potentially toxic elements (PTEs) gradients were key influences on bacterial community variability, with AMD contamination characterization factors (pH, Fe, and S) explaining 48.6 % of bacterial community variation. A bacterial co-occurrence network analysis showed that AMD-Sed contamination significantly affected topological properties, reduced network complexity and stability, and increased the vulnerability of desert grassland soil ecosystems. In addition, AMD-Sed contamination reduced C/N-cycle functioning in B, but increased S-cycle functioning. The results highlight the effects of AMD-Sed contamination on soil bacterial communities and ecological functions in desert grassland and provide a reference basis for the management and restoration of desert grassland ecosystems in their later stages.

A review of passive acid mine drainage treatment by PRB and LPB: From design, testing, to construction

An extensive volume of acid mine drainage (AMD) generated throughout the mining process has been widely regarded as one of the most catastrophic environmental problems. Surface water and groundwater impacted by pollution exhibit extreme low pH values and elevated sulfate and metal/metalloid concentrations, posing a serious threat to the production efficiency of enterprises, domestic water safety, and the ecological health of the basin. Over the recent years, a plethora of techniques has been developed to address the issue of AMD, encompassing nanofiltration membranes, lime neutralization, and carrier-microencapsulation. Nonetheless, these approaches often come with substantial financial implications and exhibit restricted long-term sustainability. Among the array of choices, the permeable reactive barrier (PRB) system emerges as a noteworthy passive remediation method for AMD. Distinguished by its modest construction expenses and enduring stability, this approach proves particularly well-suited for addressing the environmental challenges posed by abandoned mines. This study undertook a comprehensive evaluation of the PRB systems utilized in the remediation of AMD. Furthermore, it introduced the concept of low permeability barrier, derived from the realm of site-contaminated groundwater management. The strategies pertaining to the selection of materials, the physicochemical aspects influencing long-term efficacy, the intricacies of design and construction, as well as the challenges and prospects inherent in barrier technology, are elaborated upon in this discourse.

Conventional and recent advances in gravity separation technologies for coal cleaning: A systematic and critical review

"Affordable and clean energy" is enshrined in the UN Sustainable Development Goals (SDGs; #7) because of its importance in supporting the sustainable development of society. As an energy source, coal is widely used because it is abundant and its utilization for electricity and heat generation do not require complex infrastructures and technologies, which makes it ideal for the energy needs of low-income and developing countries. Coal is also essential in steel making (as coke) and cement production and will continue to be on high demand for the foreseeable future. However, coal is naturally found with impurities or gangue minerals like pyrite and quartz that could create by-products (e.g., ash) and various pollutants (e.g., CO₂, NO_X, SO_X). To reduce the environmental impacts of coal during combustion, coal cleaning-a kind of pre-combustion clean coal technology-is essential. Gravity separation, a technique that separates particles based on their differences in density, is widely used in coal cleaning due to the simplicity of its operation, low cost, and high efficiency. In this paper, recent studies (from 2011 to 2020) related to gravity separation for coal cleaning were systematically reviewed using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. A total of 1864 articles were screened after removing duplicates, and after a thorough evaluation 189 articles were reviewed and summarized. Among of conventional separation techniques, dense medium separator (DMS), particularly dense medium cyclone (DMC), is the most popular technologies studied, which could be attributed to the growing challenges of cleaning/processing fine coal-bearing materials. In recent years, most of works focused on the development of dry-type gravity technologies for coal cleaning. Finally, gravity separation challenges and future applications to address problems in environmental pollution and mitigation, waste recycling and reprocessing, circular economy, and mineral processing are discussed.

Geochemical audit of a historical tailings storage facility in Japan: Acid mine drainage formation, zinc migration and mitigation strategies

Historical tailings storage facilities (TSFs) are either abandoned or sparsely rehabilitated promoting acid mine drainage (AMD) formation and heavy metal release. To sustainably manage these sites, a geochemical audit coupled with numerical simulation to predict AMD flow paths and heavy metal migration are valuable. In this study, a 40-year-old TSF in Hokkaido, Japan was investigated. Tailings in this historical TSF contain pyrite (FeS₂) while its copper (Cu) and zinc (Zn) contents were 1400-6440 mg/kg and 2800-22,300 mg/kg, respectively. Copper and Zn were also easily released in leaching tests because they are partitioned with the exchangeable phase (29% of Zn; 15% of Cu) and oxidizable fraction (25% of Zn; 33% of Cu). Kinetic modeling results attributed AMD formation to the interactions of pyrite and soluble phases in the tailings with oxygenated groundwater, which is supported by the sequential extraction and leaching results. Calibrations of groundwater/AMD flow and solute transport in the 2D reactive transport model were successfully done using hydraulic heads measured on-site and leaching results, respectively. The model forecasted the quality of AMD to deteriorate with time and AMD formation to continue for 1000 years. It also predicted ~24% AMD flux reduction, including lower Zn release with time when recharge reduction interventions are implemented on-site.

Inactivation of Escherichia coli by dual-functional zerovalent Fe/Al composites in water

A bimetallic Fe/Al disinfection system was developed to examine the feasibility of inactivation of water borne microorganisms. In this study, the effectiveness and mechanisms of the bimetallic Fe/Al system on the inactivation of model bacteria, Escherichia coli (E. coli), were investigated. Results revealed that the Fe/Al system effectively inactivated E. coli to reach nearly 2 logs (99%) removal within 20 min and 4 logs (99.99%) at 24 h, indicating that the Fe/Al composite was able to sustain a long-term disinfection capacity. The inactivation ability resulted from hydroxyl radicals produced by a Fenton reaction through in-situ self-generated Fe²⁺ and H₂O₂ species in the Fe/Al system. In addition to the attack by the radicals, some of E. coli were adsorbed onto the Fe/Al composite (zeta potential of 30-50 mV) as a result of Coulomb interaction. Scanning electron microscope (SEM) images showed that the adsorbed bacteria had damaged pores at the two ends of their rod-like cells. This phenomenon suggested that a micro-electric field between the Fe/Al galvanic couple induced electroporation of the adsorbed E. coli and thus further advanced additional inactivation ability for the bacteria disinfection.

Investigating the Fe0/H2O systems using the methylene blue method: Validity, applications, and future directions

An innovative approach to characterize the reactivity of metallic iron (Fe⁰) for aqueous contaminant removal has been in use for a decade: The methylene blue method (MB method). The approach considers the differential adsorptive affinity of methylene blue (MB) for sand and iron oxides. The MB method characterizes MB discoloration by sand as it is progressively coated by in-situ generated iron corrosion products (FeCPs) to deduce the extent of iron corrosion. The MB method is a semi-quantitative tool that has successfully clarified some contradicting reports on the Fe⁰/H₂O system. Moreover, it has the potential to serve as a powerful tool for routine tests in the Fe⁰ remediation industry, including quality assurance and quality control (QA/QC). However, MB is widely used as a 'molecular probe' to characterize the Fe⁰/H₂O system, for instance for wastewater treatment. Thus, there is scope to avoid confusion created by the multiple uses of MB in Fe⁰/H₂O systems. The present communication aims at filling this gap by presenting the science of the MB method, and its application and limitations. It is concluded that the MB method is very suitable for Fe⁰ material screening and optimization of operational designs. However, the MB method only provides semi-quantitative information, but gives no data on the solid-phase characterization of solid Fe⁰ and its reaction products. In other words, further comprehensive investigations with microscopic and spectroscopic surface and solid-state analyses are needed to complement results from the MB method.

Editorial for Special Issue “Novel and Emerging Strategies for Sustainable Mine Tailings and Acid Mine Drainage Management”

Climate change is one of the most pressing problems facing humanity this century [...]