Biomimetic silica microspheres in biosensing

Impact of poly(ethylene glycol) functionalized lipids on ordering and fluidity of colloid supported lipid bilayers

Colloid supported lipid bilayers (CSLBs) are highly appealing building blocks for functional colloids. In this contribution, we critically evaluate the impact on lipid ordering and CSLB fluidity of inserted additives. We focus on poly(ethylene glycol) (PEG) bearing lipids, which are commonly introduced to promote colloidal stability. We investigate whether their effect on the CSLB is related to the incorporated amount and chemical nature of the lipid anchor. To this end, CSLBs were prepared from lipids with a low or high melting temperature (T_m), DOPC, and DPPC, respectively. Samples were supplemented with either 0, 5 or 10 mol% of either a low or high T_m PEGylated lipid, DOPE-PEG₂₀₀₀ or DSPE-PEG₂₀₀₀, respectively. Lipid ordering was probed via differential scanning calorimetry and fluidity by fluorescence recovery after photobleaching. We find that up to 5 mol% of either PEGylated lipids could be incorporated into both membranes without any pronounced effects. However, the fluorescence recovery of the liquid-like DOPC membrane was markedly decelerated upon incorporating 10 mol% of either PEGylated lipids, whilst insertion of the anchoring lipids (DOPE and DSPE without PEG₂₀₀₀) had no detectable impact. Therefore, we conclude that the amount of incorporated PEG stabilizer, not the chemical nature of the lipid anchor, should be tuned carefully to achieve sufficient colloidal stability without compromising the membrane dynamics. These findings offer guidance for the experimental design of studies using CSLBs, such as those focusing on the consequences of intra- and inter-particle inhomogeneities for multivalent binding and the impact of additive mobility on superselectivity.

Reconstitution of Membrane-associated Components of a G-protein Signaling Pathway on Membrane-coated Nanoparticles (Lipobeads)

G-protein coupled signaling pathways are organized into multi-protein complexes called signalosomes that are located within and on cellular membranes. We describe the use of silica nanoparticles coated with a unilamellar phospholipid bilayer (lipobeads) to reconstitute the activated photoreceptor G-protein α-subunit (Gtα*) with its cognate effector (phosphodiesterase-6; PDE6) for biochemical and structural studies of the activation mechanism regulating this GPCR signaling pathway. Lipobeads are prepared by resuspending dried-down phospholipid mixtures with monodisperse 70 nm silica particles, followed by extrusion through a 100 nm membrane filter. This uniform and supported liposomal preparation is easily sedimented, permitting the separation of soluble from membrane-associated proteins. Upon loading lipobeads with Gtα* and PDE6, we find that activation of PDE6 catalysis by Gtα* occurs much more efficiently than in the absence of membranes. Chemical cross-linking of membrane-confined proteins allows detection of changes in protein-protein interactions, resulting from G-protein activation of PDE6. The advantages of using lipobeads over partially purified membrane preparations or traditional liposomal preparations are generally applicable to the study of other membrane-confined signal transduction pathways.

Lipid exchange enhances geometric pinning in multicomponent membranes on patterned substrates

Experiments on supported lipid bilayers featuring liquid ordered/disordered domains have shown that the spatial arrangement of the lipid domains and their chemical composition are strongly affected by the curvature of the substrate. Furthermore, theoretical predictions suggest that both these effects are intimately related with the closed topology of the bilayer. In this work, we test this hypothesis by fabricating supported membranes consisting of colloidal particles of various shapes lying on a flat substrate. A single lipid bilayer coats both colloids and substrate, allowing local lipid exchange between them, thus rendering the system thermodynamically open, i.e. able to exchange heat and molecules with an external reservoir in the neighborhood of the colloid. By reconstructing the Gibbs phase diagram for this system, we demonstrate that the free-energy landscape is directly influenced by the geometry of the colloid. In addition, we find that local lipid exchange enhances the pinning of the liquid disordered phase in highly curved regions. This allows us to provide estimates of the bending moduli difference of the domains. Finally, by combining experimental and numerical data, we forecast the outcome of possible experiments on catenoidal and conical necks and show that these geometries could greatly improve the precision of the current estimates of the bending moduli.

Colloid supported lipid bilayers for self-assembly

The use of colloid supported lipid bilayers (CSLBs) has recently been extended to create colloidal joints, that enable the assembly of structures with internal degrees of flexibility, and to study lipid membranes on curved and closed geometries. These novel applications of CSLBs rely on previously unappreciated properties: the simultaneous fluidity of the bilayer, lateral mobility of inserted (linker) molecules and colloidal stability. Here we characterize every step in the manufacturing of CSLBs in view of these requirements using confocal microscopy and fluorescence recovery after photobleaching (FRAP). Specifically, we have studied the influence of different particle properties (roughness, surface charge, chemical composition, polymer coating) on the quality and mobility of the supported bilayer. We find that the insertion of lipopolymers in the bilayer can affect its homogeneity and fluidity. We improve the colloidal stability by inserting lipopolymers or double-stranded inert DNA into the bilayer. We include surface-mobile DNA linkers and use FRAP to characterize their lateral mobility both in their freely diffusive and bonded state. Finally, we demonstrate the self-assembly of flexibly linked structures from the CSLBs modified with surface-mobile DNA linkers. Our work offers a collection of experimental tools for working with CSLBs in applications ranging from controlled bottom-up self-assembly to model membrane studies.

Transport of biomolecules to binding partners displayed on the surface of microbeads arrayed in traps in a microfluidic cell

Arrays of probe molecules integrated into a microfluidic cell are utilized as analytical tools to screen the binding interactions of the displayed probes against a target molecule. These assay platforms are useful in enzyme or antibody discovery, clinical diagnostics, and biosensing, as their ultraminiaturized design allows for high sensitivity and reduced consumption of reagents and target. We study here a platform in which the probes are first grafted to microbeads which are then arrayed in the microfluidic cell by capture in a trapping course. We examine a course which consists of V-shaped, half-open enclosures, and study theoretically and experimentally target mass transfer to the surface probes. Target binding is a two step process of diffusion across streamlines which convect the target over the microbead surface, and kinetic conjugation to the surface probes. Finite element simulations are obtained to calculate the target surface concentration as a function of time. For slow convection, large diffusive gradients build around the microbead and the trap, decreasing the overall binding rate. For rapid convection, thin diffusion boundary layers develop along the microbead surface and within the trap, increasing the binding rate to the idealized limit of untrapped microbeads in a channel. Experiments are undertaken using the binding of a target, fluorescently labeled NeutrAvidin, to its binding partner biotin, on the microbead surface. With the simulations as a guide, we identify convective flow rates which minimize diffusion barriers so that the transport rate is only kinetically determined and measure the rate constant.

Cancer Nanotechnology: Opportunities for Prevention, Diagnosis, and Therapy

Nanotechnological innovations over the last 16 years have brought about the potential to revolutionize specific therapeutic drug delivery to cancer tissue without affecting normal tissues. In addition, there are new nanotechnology-based platforms for diagnosis of cancers and for theranostics, i.e., integrating diagnosis with therapy and follow-up of effectiveness of therapy. This chapter presents an overview of these nanotechnology-based advancements in the areas of prevention, diagnosis, therapy, and theranostics for cancer. In addition, we stress the need to educate bio- and medical students in the field of nanotechnology.

POPC Bilayers Supported on Nanoporous Substrates: Specific Effects of Silica-Type Surface Hydroxylation and Charge Density

Recent advances in nanotechnology bring to the forefront a new class of extrinsic constraints for remodeling lipid bilayers. In this next-generation technology, membranes are supported over nanoporous substrates. The nanometer-sized pores in the substrate are too small for bilayers to follow the substrate topology; consequently, the bilayers hang over the pores. Experiments demonstrate that nanoporous substrates remodel lipid bilayers differently from continuous substrates. The underlying molecular mechanisms, however, remain largely undetermined. Here we use molecular dynamics (MD) simulations to probe the effects of silica-type hydroxylation and charge densities on adsorbed palmitoyl-oleoylphosphatidylcholine (POPC) bilayers. We find that a 50% porous substrate decorated with a surface density of 4.6 hydroxyls/nm(2) adsorbs a POPC bilayer at a distance of 4.5 Å, a result consistent with neutron reflectivity experiments conducted on topologically similar silica constructs under highly acidic conditions. Although such an adsorption distance suggests that the interaction between the bilayer and the substrate will be buffered by water molecules, we find that the substrate does interact directly with the bilayer. The substrate modifies several properties of the bilayer-it dampens transverse lipid fluctuations, reduces lipid diffusion rates, and modifies transverse charge densities significantly. Additionally, it affects lipid properties differently in the two leaflets. Compared to substrates functionalized with sparser surface hydroxylation densities, this substrate adheres to bilayers at smaller distances and also remodels POPC more extensively, suggesting a direct correspondence between substrate hydrophilicity and membrane properties. A partial deprotonation of surface hydroxyls, as expected of a silica substrate under mildly acidic conditions, however, produces an inverse effect: it increases the substrate-bilayer distance, which we attribute to the formation of an electric double layer over the negatively charged substrate, and restores, at least partially, leaflet asymmetry and headgroup orientations. Overall, this study highlights the intrinsic complexity of lipid-substrate interactions and suggests the prospect of making two surface attributes-dipole densities and charge densities-work antagonistically toward remodeling lipid bilayer properties.

Infrared and fluorescence spectroscopic studies of a phospholipid bilayer supported by a soft cationic hydrogel scaffold

Polarized attenuated total reflection (ATR-IR) spectroscopy and fluorescence microscopy techniques were used to characterize a 1,2-diphytanoyl-sn-glycero-3-phosphocholine (DPhPC) membrane supported on porous, cationic hydrogel beads. Fluorescence microscopy images showed that the DPhPC coated the external surface of the hydrogel scaffold. In addition, a fluorescence assay of the emission intensity of the Tb(3+)/dipicolinic acid complex demonstrated that the DPhPC coating acted as a barrier to Tb(3+) efflux from the scaffolded vesicle and successfully sealed the porous hydrogel bead. Fluorescence quenching and ATR-IR spectroscopic measurements revealed that the lipid coating has a bilayer structure. The phytanoyl chains were found to exhibit significant trans-gauche isomerization, characteristic of the fluid liquid phase. However, no lipid lateral mobility was observed by fluorescence recovery after photobleaching (FRAP) measurements. The phosphocholine headgroup was found to be well hydrated and oriented such that the cationic choline group tucked in behind the anionic phosphate group, consistent with an electrostatic attraction between the cationic scaffold and zwitterionic lipid. The absence of lipid lateral mobility may be due to the strength of this attraction.

Imaging and Functional Analysis of γ-Secretase and Substrate in a Proteolipobead System with an Activity-Based Probe

Investigation of intramembranal protease catalysis demands the generation of intact biomembrane assemblies with structural integrity and lateral mobility. Here, we report the development of a microsphere supported-biomembrane platform enabling characterization of γ-secretase and substrate within proteolipobead assemblies via microscopy and flow cytometry. The active enzyme loading levels were tracked using an activity-based probe, with the biomembranes delineated by carbocyanine lipid reporters. Proteolipobeads formed from HeLa proteoliposomes gave rise to homogeneous distributions of active γ-secretase within supported biomembranes with native-like fluidity. The substrate loading into supported biomembranes was detergent-dependent, as evidenced by even colocalization of substrate and lipid tracers in confocal 3D imaging of individual proteolipobeads. Moreover, the loading level was tunable with bulk substrate concentration. γ-Secretase substrate cleavage and its inhibition within γ-secretase proteolipobeads were observed. This platform offers a means to visualize enzyme and substrate loading, activity, and inhibition in a controllable biomembrane microenvironment.

Interfacing living cells and spherically supported bilayer lipid membranes

Spherically supported bilayer lipid membranes (SS-BLMs) exhibiting co-existing membrane microdomains were created on spherical silica substrates. These 5 μm SiO2-core SS-BLMs are shown to interact dynamically when interfaced with living cells in culture, while keeping the membrane structure and lipid domains on the SS-BLM surface intact. Interactions between the SS-BLMs and cellular components are examined via correlating fluorescently labeled co-existing microdomains on the SS-BLMs, their chemical composition and biophysical properties with the consequent organization of cell membrane lipids, proteins, and other cellular components. This approach is demonstrated in a proof-of-concept experiment involving the dynamic organization of cellular cytoskeleton, monitored as a function of the lipid domains of the SS-BLMs. The compositional versatility of SS-BLMs provides a means to address the relationship between the phenomenon of lipid phase separation and the other contributors to cell membrane lateral heterogeneity.

Mass transfer in the biomolecular binding of a target against probe molecules on the surface of microbeads sequestered in wells in a microfluidic cell

Diagnostic tools which screen the binding interactions of a protein target against a display of biomolecular probes to identify molecules which bind the target are central to cell proteomic studies, and to diagnostic assays. Here, we study a microfluidic design for screening interactions in which the probe molecules are hosted on microbeads sequestered in wells arranged at the bottom of a microfluidic flow channel. Assays are undertaken by streaming an analyte solution with a fluorescently labelled target through the cell, and identifying the fluorescing beads. Numerical simulations are first constructed for the analyte flow over the microbeads in the well array, and the increase in the target concentration on the microbead surface. The binding profile is expressed as a function of the ratio of the convective to the diffusive transport rates (Peclet number or Pe), and the ratio of the kinetic to the diffusive rates (Damkohler number, Da). For any Pe, as Da becomes small enough, the transport is determined by the intrinsic kinetic binding rate. As Pe increases, a thin concentration boundary layer develops over the top surface of the microbead because of the convective flow, and target binds more rapidly. However, the relatively stagnant layers of liquid in the well provide a diffusion barrier which slows the target transport, and for any Da and Pe the transport is slower than equivalent patches of probes arranged on the channel wall. Experiments are also undertaken at high Pe, using the binding of fluorescently labelled NeutrAvidin as a target to probes of its binding partner, biotin, on the microbead surface. The binding profile is compared to the simulations to measure the kinetic rate constant, and this comparison shows that the transport in the cell is not kinetically limited because of the diffusion barriers created by the stagnant liquid layer in the well. Simulations and experiments on microbeads which are only partially recessed in the well demonstrate an increase in the mass transfer rate as more of the microbead surface intersects the flow and the diffusion limitation due to the stagnant layer of liquid surrounding the bottom part of the microbead is minimized.

Spectroscopic and permeation studies of phospholipid bilayers supported by a soft hydrogel scaffold

Polarized attenuated total reflection infrared (ATR-IR) spectroscopy, fluorescence microscopy, and fluorescence spectroscopy were used to characterize a lipid coating composed of 70 mol % 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 30 mol % cholesterol, supported on a spherical hydrogel scaffold. The fluorescence microscopy images show an association between the lipid coating and the hydrogel scaffold. Fluorescence permeability measurements revealed that the phospholipid coating acts as a permeability barrier, exhibiting characteristics of a lamellar bilayer coating structure. Variable evanescent wave penetration depth ATR-IR spectroscopy studies validated the determination of quantitative molecular orientation information for a lipid coating supported on a spherical scaffold. These polarized ATR-IR studies measured an average DMPC acyl chain tilt angle of ∼21-25°, with respect to the surface normal.

A lipobead microarray assembled by particle entrapment in a microfluidic obstacle course and used for the display of cell membrane receptors

Platforms which can display cell membrane ligands and receptors as a microarray library of probes for screening against a target are essential tools in drug discovery, biomarker identification, and pathogen detection. Membrane receptors and ligands require their native bilayer environment to retain their selectivity and binding affinity, and this complicates displaying them in a microarray platform. In this study, a design is developed in which the probes are first incorporated in supported lipid bilayers formed around micron-sized particles (lipobeads), and the microbeads themselves are then arrayed on a surface by hydrodynamic capture in a microfluidic obstacle course of traps. The traps are "V" shaped open enclosures, which are arranged in a wide channel of a microfluidic device, and capture the lipobeads (slightly smaller than the channel height) as they are streamed through the course. Screening assays are undertaken directly in the device after assembly, by streaming a fluorescently labeled target through the device and detecting the bead fluorescence. Conditions are first established for which the supported bilayers on the bead surface remain intact during the capture and assay steps, using fluorescent tags in the bilayer to infer bilayer integrity. Numerical calculations of the hydrodynamic drag coefficient on the entrapped beads are presented in conjunction with the stability experiments to develop criteria for the bilayer stability as a function of the screening assay perfusion rate. Simulations of the flow streamlines are also presented to quantify the trapping efficiency of the obstacle course. Screening assays are illustrated, assaying fluorescently labeled NeutrAvidin with biotin, and labeled cholera toxin with its ganglioside binding ligand, GM1. Sequential capturing of sets of lipobeads (one at a time, and with each set bearing a different probe), followed by indexing the bead positions after each set is entrapped, allows for the construction of an indexed array of multiple probes without the need for particle encoding and is illustrated using the NeutrAvidin-biotin pair. Finally, the lipobead platform is used for quantitatively measuring the kinetic rate constants for the binding of a probe (biotin) to a target (NeutrAvidin).

Tether-supported biomembranes with α-helical peptide-based anchoring constructs

The strict requirement of constructing a native lipid environment to preserve the structure and functionality of membrane proteins is the starting constraint when building biomaterials and sensor systems from these biomolecules. To enhance the viability of supported biomembranes systems and build new ligand display interfaces, we apply rationally designed peptides partitioned into the lipid bilayer interface. Peptides designed to form membrane-spanning α-helical anchoring domains are synthesized using solid-phase peptide synthesis. K(3)A(4)L(2)A(7)L(2)A(3)K(2)-FITC is synthesized on the 100 mg scale for use as a biomembrane anchoring molecule, where orthogonal side-chain modifications allow us to introduce probes enabling peptide localization within supported bilayers. The peptides are found to form α-helical domains within liposomes as assessed with circular dichroism spectroscopy. These peptides are designed to be incorporated into lipid bilayers supported by microspheres and serve as biomembrane anchoring moieties to amino-terminated surfaces. Here, the silica bead surface (4.7 μm diameter) is activated with homobifunctional NHS-PEG(3000)-NHS as "polymer cushion" spacers. This tethering to a subset of the K(3)A(4)L(2)A(7)L(2)A(3)K(2)-FITC molecules present in the bilayer is achieved by the fusion of liposomes followed by coupling of the peptide amino groups to the NHS presented from the silica microsphere surfaces. The biomembrane distributions of tethered and untethered K(3)A(4)L(2)A(7)L(2)A(3)K(2)-FITC are probed with confocal microscopy and are found to give 3D reconstructions consistent with largely homogeneous supported biomembranes. The fluidity of the untethered fraction of peptides within supported membranes is quantified using the fluorescence recovery after photobleaching (FRAP) technique. The presence of the PEG(3000) polymer cushion facilitated a 28.9% increase in peptide diffusivity over untethered bilayers at the lowest peptide to lipid ratio we examined. We show that rationally designed peptide-based anchors can be used to tether lipid bilayers, creating a polymer-cushioned lipid microenvironment on surfaces with high lateral mobility and facilitating the development of a new platform for ligand displays.

Nonintercalating nanosubstrates create asymmetry between bilayer leaflets

The physical properties of lipid bilayers can be remodeled by a variety of environmental factors. Here we investigate using molecular dynamics simulations the specific effects of nanoscopic substrates or external contact points on lipid membranes. We expose palmitoyl-oleoyl phosphatidylcholine bilayers unilaterally and separately to various model nanosized substrates differing in surface hydroxyl densities. We find that a surface hydroxyl density as low as 10% is sufficient to keep the bilayer juxtaposed to the substrate. The bilayer interacts with the substrate indirectly through multiple layers of water molecules; however, despite such buffered interaction, the bilayers exhibit certain properties different from unsupported bilayers. The substrates modify transverse lipid fluctuations, charge density profiles, and lipid diffusion rates, although differently in the two leaflets, which creates an asymmetry between bilayer leaflets. Other properties that include lipid cross-sectional areas, component volumes, and order parameters are minimally affected. The extent of asymmetry that we observe between bilayer leaflets is well beyond what has been reported for bilayers adsorbed on infinite solid supports. This is perhaps because the bilayers are much closer to our nanosized finite supports than to infinite solid supports, resulting in a stronger support-bilayer electrostatic coupling. The exposure of membranes to nanoscopic contact points, therefore, cannot be considered as a simple linear interpolation between unsupported membranes and membranes supported on infinite supports. In the biological context, this suggests that the exposure of membranes to nonintercalating proteins, such as those belonging to the cytoskeleton, should not always be considered as passive nonconsequential interactions.

Synthetic protocells interact with viral nanomachinery and inactivate pathogenic human virus

We present a new antiviral strategy and research tool that could be applied to a wide range of enveloped viruses that infect human beings via membrane fusion. We test this strategy on two emerging zoonotic henipaviruses that cause fatal encephalitis in humans, Nipah (NiV) and Hendra (HeV) viruses. In the new approach, artificial cell-like particles (protocells) presenting membrane receptors in a biomimetic manner were developed and found to attract and inactivate henipavirus envelope glycoprotein pseudovirus particles, preventing infection. The protocells do not accumulate virus during the inactivation process. The use of protocells that interact with, but do not accumulate, viruses may provide significant advantages over current antiviral drugs, and this general approach may have wide potential for antiviral development.

On the role of anionic lipids in charged protein interactions with membranes

We investigate the role of anionic lipids in the binding to, and subsequent movement of charged protein groups in lipid membranes, to help understand the role of membrane composition in all membrane-active protein sequences. We demonstrate a small effect of phosphatidylglycerol (PG) lipids on the ability of an arginine (Arg) side chain to bind to, and cross a lipid membrane, despite possessing a neutralizing charge. We observe similar membrane deformations in lipid bilayers composed of phosphatidylcholine (PC) and PC/PG mixtures, with comparable numbers of water and lipid head groups pulled into the bilayer hydrocarbon core, and prohibitively large ~20 kcal/mol barriers for Arg transfer across each bilayer, dropping by just 2-3 kcal/mol due to the binding of PG lipids. We explore the causes of this small effect of introducing PG lipids and offer an explanation in terms of the limited membrane interaction for the choline groups of PC lipids bound to the translocating ion. Our calculations reveal a surprising lack of preference for Arg binding to PG lipids themselves, but a small increase in interfacial binding affinity for lipid bilayers containing PG lipids. These results help to explain the nature of competitive lipid binding to charged protein sequences, with implications for a wide range of membrane binding domains and cell perturbing peptides.