Self assembled films of porphyrins with amine groups at different positions: influence of their orientation on the corrosion inhibition and the electrocatalytic activity

Ligand Isomerization Driven Electrocatalytic Switching

The prevailing view about molecular catalysts is that the central metal ion is responsible for the reaction mechanism and selectivity, whereas the ligands mainly affect the reaction kinetics. Here, we question this paradigm and show that ligands have a dramatic influence on the selectivity of the product. We show how even a seemingly small change in ligand isomerization sharply alters the selectivity of the well-researched oxygen reduction reaction (ORR) Co phthalocyanine catalyst from an indirect 2e- to a direct 4e- pathway. Detailed analysis reveals that intramolecular hydrogen-bond interactions in the ligand activate the catalytic Co, directing the oxygen binding and thus deciding the final product. The resulting catalyst is the first example of a Co-based molecular catalyst catalyzing a direct 4e- ORR via ligand isomerization, for which it shows an activity close to the benchmark Pt in an actual H2-O2 fuel cell. The effect of the ligand isomerism is demonstrated with different central metal ions, thus highlighting the generalizability of the findings and their potential to open new possibilities in the design of molecular catalysts.

Exploiting Asymmetric Co States in a Co-N-C Catalyst for an Efficient Oxygen Reduction Reaction

Co-NC catalysts have attracted extensive concerns derived from their high oxygen reduction reaction (ORR) activity, but the catalytic mechanism of Co species with different forms remains controversial. Herein, we prepare Co-NC catalysts with a cobalt nanoparticle-supported and nitrogen-doped carbon structure using the ZIF-67 precursor, in which the Co states in the catalyst present an asymmetric state of an exposed carbon coating (Asy-Co) and a symmetric state of buried carbon (Sy-Co). The acid etching process removed the exposed asymmetric cobalt nanoparticles on the surface. The specific role of cobalt nanoparticles with different forms in the Co-NC catalysts was comprehensively clarified through analyzing the chemical coordination environment by XPS and XAFS. The half-wave potential (E1/2 = 0.83 V) and onset potential (Eon = 1.04 V) of the Co-NC catalysts obtained after acid etching decreased significantly. Thus, the cobalt species removed by the acid etching process offered confirmed contributions to the catalytic activity. This work puts forward an important reference for the design and exploitation of non-noble metal catalysts using symmetry-derived motifs.

Efficient Decrease in Corrosion of Steel in 0.1 M HCl Medium Realized by a Coating with Thin Layers of MnTa2O6 and Porphyrins Using Suitable Laser-Type Approaches

The purpose of this research is to meet current technical and ecological challenges by developing novel steel coating systems specifically designed for mechanical equipment used in aggressive acid conditions. Homogeneous sandwich-type layered films on the surface of steel electrodes were realized using a pseudo-binary oxide, MnTa₂O₆, and two different substituted porphyrin derivatives, namely: 5-(4-carboxy-phenyl)-10,15,20-tris (4-methyl-phenyl)-porphyrin and 5-(4-methyl-benzoate)-10,15,20-tris (4-methyl-phenyl)-porphyrin, which are novel investigated compound pairs. Two suitable laser strategies, pulsed laser deposition (PLD) and matrix-assisted pulsed laser evaporation (MAPLE), were applied in order to prevent porphyrin decomposition and to create smooth layers with low porosity that are extremely adherent to the surface of steel. The electrochemical measurements of corrosion-resistant coating performance revealed that in all cases in which the steel electrodes were protected, a significant value of corrosion inhibition efficiency was found, ranging from 65.6 to 83.7%, depending on the nature of the porphyrin and its position in the sandwich layer. The highest value (83.7%) was obtained for the MAPLE/PLD laser deposition of 5-(4-carboxy-phenyl)-10,15,20-tris (4-methyl-phenyl)-porphyrin/MnTa₂O₆(h), meaning that the inhibitors adsorbed and blocked the access of the acid to the active sites of the steel electrodes.

Protoporphyrin Extracted from Biomass Waste as Sustainable Corrosion Inhibitors of T22 Carbon Steel in Acidic Environments

Carbon steel is one of the most employed materials in many industrial sectors due to its unique physical and mechanical properties. However, within a certain period of time, carbon steel-based materials are susceptible to corrosion under operating conditions and corrosion inhibitors are important to extending the limit of use of carbon steel. In this study, the influence of protoporphyrin from animal blood hemin as an eco-friendly corrosion inhibitor for T22 carbon steel in an acidic environment (0.5 M HCl) was conducted. The hemin isolated from animal blood extracts was modified to obtain the protoporphyrin. The dosage of protoporphyrin was varied between 40 and 200 ppm and the temperature influence were studied in the range of 298–318 K. The inhibition efficiency of protoporphyrin in 0.5 M hydrochloric acid reached up to 46.2% at a dose of 160 ppm at a temperature of 298 K. The inhibition efficiency (IE) value further decreases with increasing temperature, thereby showing the process exothermic in nature and the weakening of the inhibitor molecules to adsorb on the surface of the T22 carbon steel. The potentiodynamic polarization measurements indicate that protoporphyrin acts as a mixed-type inhibitor. The adsorption of protoporphyrin on the surface of T22 carbon steel obeys the Langmuir adsorption isotherm. The thermodynamic parameter of adsorption allows us to suggest the adsorption process was dominated by physical adsorption. Thus, these current results present a case study using protoporphyrin as a promising green inhibitor for carbon steel T22 in hydrochloric acid prepared from livestock waste.

Covalent Immobilization of Organic Photosensitizers on the Glass Surface: Toward the Formation of the Light-Activated Antimicrobial Nanocoating

Two highly efficient commercial organic photosensitizers—azure A (AA) and 5-(4-aminophenyl)-10,15,20-(triphenyl)porphyrin (APTPP)—were covalently attached to the glass surface to form a photoactive monolayer. The proposed straightforward strategy consists of three steps, i.e., the initial chemical grafting of 3-aminopropyltriethoxysilane (APTES) followed by two chemical postmodification steps. The chemical structure of the resulting mixed monolayer (MIX_TC_APTES@glass) was widely characterized by X-ray photoelectron (XPS) and Raman spectroscopies, while its photoactive properties were investigated in situ by UV–Vis spectroscopy with α-terpinene as a chemical trap. It was shown that both photosensitizers retain their activity toward light-activated generation of reactive oxygen species (ROS) after immobilization on the glassy surface and that the resulting nanolayer shows high stability. Thanks to the complementarity of the spectral properties of AA and APTPP, the effectiveness of the ROS photogeneration under broadband illumination can be optimized. The reported light-activated nanocoating demonstrated promising antimicrobial activity toward Escherichia coli (E. coli), by reducing the number of adhered bacteria compared to the unmodified glass surface.

Surface Coupling of Octaethylporphyrin with Silicon Tetrachloride

The surface assembly of 2,3,7,8,12,13,17,18-octaethylporphyrin (OEP) using silicon tetrachloride as a coupling agent was investigated using atomic force microscopy (AFM). Nanopatterned films of Si-OEP were prepared by protocols of colloidal lithography to evaluate the morphology, thickness, and molecular orientation for samples prepared on Si(111). The natural self-stacking of porphyrins can pose a challenge for molecular patterning. When making films on surfaces, porphyrins will self-associate to form co-planar configurations of random stacks of molecules. There is a tendency for the flat molecules to orient spontaneously in a side-on arrangement that is mediated by physisorption to the substrate as well as by π-π interactions between macrocycles to form a layered arrangement of packed molecules, analogous to a stack of coins. When silicon tetrachloride is introduced to the reaction vessel, the coupling between the surface and porphyrins is mediated through covalent Si-O bonding. For these studies, surface structures of Si-OEP were formed that are connected with a Si-O-Si motif to a silicon atom coordinated to the center of the porphyrin macrocycles. Protocols of colloidal lithography were used as a tool to prepare surface structures and films of Si-OEP to facilitate surface characterizations. Conceptually, by arranging the macrocycles of porphyrins with defined orientation, local AFM surface measurements can be enabled to help address mechanistic questions about how molecules self-assemble and bind to substrates.

Cobalt Tetrabutano- and Tetrabenzotetraarylporphyrin Complexes: Effect of Substituents on the Electrochemical Properties and Catalytic Activity of Oxygen Reduction Reactions

Three series of cobalt tetraarylporphyrins were synthesized and characterized by electrochemistry and spectroelectrochemistry. The investigated compounds have the general formula (TpYPP)Co, butano(TpYPP)Co^II, and benzo(TpYPP)Co^II, where TpYPP represents the dianion of the meso-substituted porphyrin, Y is a CH₃, H, or Cl substituent on the para position of the four phenyl rings, and butano and benzo are respectively the β- and β'-substituted groups on the four pyrrole rings of the compound. Each porphyrin undergoes one or two reductions depending upon the meso substituent and solvent utilized. Two irreversible reductions are observed for (TpYPP)Co^II and butano(TpYPP)Co^II in CH₂Cl₂ containing 0.1 M tetra-n-butylammonium perchlorate; the first leads to the formation of a highly reactive cobalt(I) porphyrin, which can then rapidly react with a solvent to give a Co^IIICH₂Cl as the product. Only one reversible reduction is seen for benzo(TpYPP)Co^II under the same solution conditions, and the one-electron-reduction product is assigned as a cobalt(II) porphyrin π-anion radical. Three oxidations can be observed for each examined compound in CH₂Cl₂. The first oxidation is metal-centered for the (TpYPP)Co and benzo(TpYPP)Co^II derivatives, leading to generation of a cobalt(III) porphyrin with an intact π-ring system, but this redox process is ring-centered in the case of butano(TpYPP)Co^II and gives a Co^II π-cation radical product. Each porphyrin was also examined as a catalyst for oxygen reduction reactions (ORRs) when adsorbed on a graphite electrode in 1.0 M HClO₄. The number of electrons transferred (n) during ORRs is 2.0 for the butano(TpYPP)Co^II derivatives, consistent with only H₂O₂ being produced as a product for the reaction with O₂. However, the reduction of O₂ using the cobalt benzoporphyrins as catalysts gave n values between 2.6 and 3.1 under the same solution conditions, thus producing a mixture of H₂O and H₂O₂ as the reduction product. This result indicates that the β and β' substituents have a significant effect on the catalytic properties of the cobalt porphyrins for ORRs in acid media.

DFT computational correlations on conformational barriers of Zn2+ and Ni2+ chiral meso-(α,β-unsaturated)- porphyrins

Correlations between DFT and experimental measurements on Zn²⁺ and Ni²⁺ chiral meso-(α,β-unsaturated)- porphyrins were performed using Kohn-Sham methodology. The exchange-correlation Becke88-Perdew86 functional was used in conjunction with double-zeta Slater basis sets. An accurate description of the electronic processes depending on the metal ion (Zn, Ni) or ligand (perilaldehyde and myrtenal) was made, confirming experimental results in terms of structural and electronic modifications. Moreover, this theoretical study provides a stronger knowledge and interpretation of the dynamical conformational features of the free base, Zn and Ni structures. Fundamental links between the central metallic atom and distortions of the porphyrinic core and ligands were demonstrated, in agreement with experimental data. We observed that the core in ZnPeriP and ZnMyrtP species is almost flat, in comparison with the Ni porphyrinic core, which appeared much more distorted. The type of distortion differs between PeriP and MyrtP ligands, with a combined saddled-ruffled characteristic with the former and a pronounced ruffled twisting for the latter. Finally, conformational energy barriers were extracted by spinning one of the arms in steps of 20° in a 360° dihedral angle. The resulted conformational barriers for NiPeriP or NiMyrtP are lower in energy than for ZnPeriP or ZnMyrtP, in agreement with experimental data.

Porphyrins as Corrosion Inhibitors for N80 Steel in 3.5% NaCl Solution: Electrochemical, Quantum Chemical, QSAR and Monte Carlo Simulations Studies

The inhibition of the corrosion of N80 steel in 3.5 wt. % NaCl solution saturated with CO₂ by four porphyrins, namely 5,10,15,20-tetrakis(4-hydroxyphenyl)-21H,23H-porphyrin (HPTB), 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphyrin (T4PP), 4,4′,4″,4‴-(porphyrin-5,10,15,20-tetrayl)tetrakis(benzoic acid) (THP) and 5,10,15,20-tetraphenyl-21H,23H-porphyrin (TPP) was studied using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, scanning electrochemical microscopy (SECM) and scanning electron microscopy (SEM) techniques. The results showed that the inhibition efficiency, η% increases with increasing concentration of the inhibitors. The EIS results revealed that the N80 steel surface with adsorbed porphyrins exhibited non-ideal capacitive behaviour with reduced charge transfer activity. Potentiodynamic polarization measurements indicated that the studied porphyrins acted as mixed type inhibitors. The SECM results confirmed the adsorption of the porphyrins on N80 steel thereby forming a relatively insulated surface. The SEM also confirmed the formation of protective films of the porphyrins on N80 steel surface thereby protecting the surface from direct acid attack. Quantum chemical calculations, quantitative structure activity relationship (QSAR) were also carried out on the studied porphyrins and the results showed that the corrosion inhibition performances of the porphyrins could be related to their E_HOMO, E_LUMO, ω, and μ values. Monte Carlo simulation studies showed that THP has the highest adsorption energy, while T4PP has the least adsorption energy in agreement with the values of σ from quantum chemical calculations.

Stable nano-sized copper and its oxide particles using cobalt tetraamino phthalocyanine as a stabilizer; application to electrochemical activity

CVs showing the electrocatalytic reduction of dioxygen with (a) bare GC; GC modified with (b) CoPTA; (c) metallic oxide nanoparticles after exposing the particles to air for 1 day and (d) CoPTA capped copper nanoparticles.