Fibrous polymeric composites based on alginate fibres and fibres made of poly-ε-caprolactone and dibutyryl chitin for use in regenerative medicine

Computational Mechanics of Form-Fitting 3D-Printed Lattice-Based Wrist-Hand Orthosis for Motor Neuron Disease

Motor neuron disease (MND) patients often experience hand-wrist muscle atrophy resulting in severe social consequences and hampering their daily activities. Although hand-wrist orthosis is commonly used to assist weakened muscles, its effectiveness is limited due to the rapid progression of the disease and the need for customization to suit individual patient requirements. To address these challenges, this study investigates the application of three-dimensional (3D) printing technology to design and fabricate two lattice structures inspired by silkworm cocoons, using poly-ε-caprolactone as feedstock material. Finite element method (FEM) analysis is employed to study the mechanical behavior, enabling control over the geometric configuration incorporated into the hand-wrist orthosis. Through tensile displacement and three-point bending simulations, the stress distribution is examined for both lattice geometries. Geometry-1 demonstrates anisotropic behavior, while geometry-2 exhibits no strict directional dependence due to its symmetry and uniform node positioning. Moreover, the biocompatibility of lattices with human skin fibroblasts is investigated, confirming excellent biocompatibility. Lastly, the study involves semi-structured interviews with MND patients to gather feedback and develop prototypes of form-fitting 3D-printed lattice-based hand-wrist orthosis. By utilizing 3D printing technology, this study aims to provide customized orthosis that can effectively support weakened muscles and reposition the hand for individuals with MND.

A novel organometallic magnesium complexes with aggregation induced emission properties: synthesis, characterization, and fluorescent fibres applications

In this work, a novel organomagnesium complex with outstanding aggregation induced emission (AIE) properties was synthesized using dibenzoylmethane (DBM) as the ligand. The structure of the complex was confirmed to be one magnesium ion coordinated to the diones groups of two DBM molecules, and the magnesium ion adopted a distorted octahedrally geometry. The obvious emission was found for Mg(DBM) 2 powder and not in the solution, which was the first reported organomagnesium complex with AIE property. The properties of complexes were investigated by UV-vis absorption and fluorescence emission spectroscopy, cyclic voltammetry and density functional theory calculations. Moreover, the Mg(DBM) 2 solution dispersed in fifilter paper was nearly colorless, which could be made into a convenient anti-counterfeiting and encryption tool. Mg(DBM) 2 /alginate fibres were prepared by wet-spinning process and further processed into paper, which could be used in the fields of sensor, anti-counterfeiting and encryption. Sweat contains a wealth of chemical information that could potentially indicate the body's deeper biomolecular state. The prepared fluorescent fibres were used to detect sweat due to its non-toxic, low-cost efficient and fast response to analytes.

Fabrication of Biomedical Scaffolds Using Biodegradable Polymers

Degradable polymers are used widely in tissue engineering and regenerative medicine. Maturing capabilities in additive manufacturing coupled with advances in orthogonal chemical functionalization methodologies have enabled a rapid evolution of defect-specific form factors and strategies for designing and creating bioactive scaffolds. However, these defect-specific scaffolds, especially when utilizing degradable polymers as the base material, present processing challenges that are distinct and unique from other classes of materials. The goal of this review is to provide a guide for the fabrication of biodegradable polymer-based scaffolds that includes the complete pathway starting from selecting materials, choosing the correct fabrication method, and considering the requirements for tissue specific applications of the scaffold.

Parametric Finite Element Model and Mechanical Characterisation of Electrospun Materials for Biomedical Applications

Electrospun materials, due to their unique properties, have found many applications in the biomedical field. Exploiting their porous nanofibrous structure, they are often used as scaffolds in tissue engineering which closely resemble a native cellular environment. The structural and mechanical properties of the substrates need to be carefully optimised to mimic cues used by the extracellular matrix to guide cells’ behaviour and improve existing scaffolds. Optimisation of these parameters is enabled by using the finite element model of electrospun structures proposed in this study. First, a fully parametric three-dimensional microscopic model of electrospun material with a random fibrous network was developed. Experimental results were obtained by testing electrospun poly(ethylene) oxide materials. Parameters of single fibres were determined by atomic force microscopy nanoindentations and used as input data for the model. The validation was performed by comparing model output data with tensile test results obtained for electrospun mats. We performed extensive analysis of model parameters correlations to understand the crucial factors and enable extrapolation of a simplified model. We found good agreement between the simulation and the experimental data. The proposed model is a potent tool in the optimisation of electrospun structures and scaffolds for enhanced regenerative therapies.

Wet-spinning of fluorescent fibers based on gold nanoclusters-loaded alginate for sensing of heavy metal ions and anti-counterfeiting

Fluorescent and robust fibers based on gold nanoclusters-loaded alginate were successfully prepared by wet spinning of gold nanoclusters and alginate. The relationship between process conditions, mechanical properties, and fluorescent properties of fibers was investigated. The as-prepared fibers exhibited high mechanical strength (up to 7.09 cN/dtex) and remarkable red emission under ultraviolet excitation. The fibers could be used as a simple, low-cost, and high-selectivity fluorescent sensor for detecting Cu²⁺ and Hg²⁺ among various metal ions in aqueous solution, with a detection limit as low as 187.99 nM for Cu²⁺ and 82.14 nM for Hg²⁺, respectively. Furthermore, the novel fluorescent fibers were used as an anti-counterfeiting label through knitting into textile materials. The wet-spun functional fibers may be applied to the design of smart wearable sensors and flexible optical sensors.

An Overview of Chitosan Nanofibers and their Applications in the Drug Delivery Process

Chitosan is a polycationic natural polymer which is abundant in nature. Chitosan has gained much attention as natural polymer in the biomedical field. The up to date drug delivery as well as the nanotechnology in controlled release of drugs from chitosan nanofibers are focused in this review. Electrospinning is one of the most established and widely used techniques for preparing nanofibers. This method is versatile and efficient for the production of continuous nanofibers. The chitosan-based nanofibers are emerging materials in the arena of biomaterials. Recent studies revealed that various drugs such as antibiotics, chemotherapeutic agents, proteins and anti-inflammatory analgesic drugs were successfully loaded onto electrospun nanofibers. Chitosan nanofibers have several outstanding properties for different significant pharmaceutical applications such as wound dressing, tissue engineering, enzyme immobilization, and drug delivery systems. This review highlights different issues of chitosan nanofibers in drug delivery applications, starting from the preparation of chitosan nanofibers, followed by giving an idea about the biocompatibility and degradation of chitosan nanofibers, then describing how to load the drug into the nanofibers. Finally, the major applications of chitosan nanofibers in drug delivery systems.

Sustained release of N-acetylcysteine by sandwich structured polycaprolactone/collagen scaffolds for wound healing

PCL (poly-caprolactone) nanofibers have good biocompatibility and high porosity, which are usually utilized for application in wound dressings. However, wound healing could be hindered by the overproduction of reactive oxygen species (ROS) and different factors. Pure nanofibers cannot satisfy these requirements of wound healing. N-acetylcysteine (NAC), as an antioxidant, meets the requirements for wound healing by resisting the overproduction of ROS and by promoting angiogenesis and maturation of the epidermis. In this study, we prepared a sandwich structured PCL-Col/NAC scaffold using the molding method, which consisted of PCL nanofibers at the core and NAC-loaded collagen on both sides. The hydroscopicity and tensile modulus of PCL-Col/NAC scaffolds showed best performance of these properties among groups. Meanwhile, the drug release profiles of PCL-Col/NAC scaffolds were investigated using the HPLC method and the results suggested a sustained drug release of NAC for PCL-Col/NAC scaffolds. In addition, PCL-Col/NAC scaffolds presented better properties than the control groups in cell migration and proliferation. The in vivo wound healing therapy effect was studied using an oval (2 × 1 cm) full-thickness skin defect wound model for SD rats. After 21 days, gross view and histological analysis showed a favorable beneficial therapeutic effect as well as better epidermal maturation compared with the control groups. CD31 immunohistology results revealed relatively more new vessels in the PCL-Col/NAC group than the control groups. This study developed novel PCL-Col/NAC scaffolds with an excellent hydroscopicity, tensile modulus and the ability to promote epidermal maturation and angiogenesis, demonstrating its promising potential in wound healing treatment. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2019.

Biological Properties of Low-Toxicity PLGA and PLGA/PHB Fibrous Nanocomposite Implants for Osseous Tissue Regeneration. Part I: Evaluation of Potential Biotoxicity

In response to the demand for new implant materials characterized by high biocompatibility and bioresorption, two prototypes of fibrous nanocomposite implants for osseous tissue regeneration made of a newly developed blend of poly(l-lactide-co-glycolide) (PLGA) and syntheticpoly([R,S]-3-hydroxybutyrate), PLGA/PHB, have been developed and fabricated. Afibre-forming copolymer of glycolide and l-lactide (PLGA) was obtained by a unique method of synthesis carried out in blocksusing Zr(AcAc)₄ as an initiator. The prototypes of the implants are composed of three layers of PLGA or PLGA/PHB, nonwoven fabrics with a pore structure designed to provide the best conditions for the cell proliferation. The bioactivity of the proposed implants has been imparted by introducing a hydroxyapatite material and IGF1, a growth factor. The developed prototypes of implants have been subjected to a set of in vitro and in vivobiocompatibility tests: in vitro cytotoxic effect, in vitro genotoxicity and systemic toxicity. Rabbitsshowed no signs of negative reactionafter implantation of the experimental implant prototypes.

Biodegradable intramedullary nails reinforced with carbon and alginate fibers: In vitro and in vivo biocompatibility

BACKGROUND

Commonly, intramedullary nails are made of nondegradable materials, and hence they need to be removed once the bone fracture is healed. We propose a novel composite material consisting of poly-L-lactide matrix modified with carbon and alginate fibers to be used for biodegradable intramedullary fixation. The aim of this study was to make in vitro and in vivo biocompatibility assessments.

METHODS

In the in vitro conditions, biocompatibility of biomaterials was compared using normal human osteoblasts. After 3 and 7 days, cytotoxicity, viability and proliferation tests were performed, as well as cell morphology and adhesion observations. In the in vivo experiments, Californian rabbits (approx. 9 months old) were used. The composite nails and controls (Kirschner wires) were used for fixation of distal femoral osteotomy. The evaluation was made on the basis of clinical observations, radiographs taken after 2, 4, 6 and 8 weeks post implantation, and macroscopic and histological observations.

RESULTS

Cell tests indicated that both modifiers had a positive influence on cell viability. Biodegradable composite nails led to bony union when used for fixation of distal diaphysis osteotomy in rabbits. Histological analysis showed that the initial focal necrosis should be fully compensated for by the osteoblast proliferation and trabeculae formation.

CONCLUSIONS

Both in vitro and in vivo tests confirmed biocompatibility and potential applicability of novel biodegradable intramedullary nails modified with long carbon and alginate fibers for osteosynthesis of bone epiphysis.

Polylactide/polycaprolactone asymmetric membranes for guided bone regeneration

The aim of this work was to develop bioresorbable, asymmetric membranes for guided bone regeneration (GBR). Two resorbable polymers – polylactide (PLA) and polycaprolactone (PCL) were used in fabrication process. Two different manufacturing methods were applied: electrospinning in the case of PLA and freeze-drying of PCL. Mechanical properties, stability in a water environment and biocompatibility of fabricated membranes were evaluated. Microstructure [scanning electron microscopy (SEM)] of the membranes was assessed in terms of level of porosity, as well as size and shape of the pores. Study showed that combination of electrospinning and freeze-drying methods allows biocompatible PLA/PCL bi-phasic materials of appropriate mechanical properties and diverse microstructure to be produced, that should on the one hand prevent soft tissue growth, and on the other hand be a suitable scaffold for the growth of bone cells.

Emerging biomedical applications of nano-chitins and nano-chitosans obtained via advanced eco-friendly technologies from marine resources

The present review article is intended to direct attention to the technological advances made in the 2010-2014 quinquennium for the isolation and manufacture of nanofibrillar chitin and chitosan. Otherwise called nanocrystals or whiskers, n-chitin and n-chitosan are obtained either by mechanical chitin disassembly and fibrillation optionally assisted by sonication, or by e-spinning of solutions of polysaccharides often accompanied by poly(ethylene oxide) or poly(caprolactone). The biomedical areas where n-chitin may find applications include hemostasis and wound healing, regeneration of tissues such as joints and bones, cell culture, antimicrobial agents, and dermal protection. The biomedical applications of n-chitosan include epithelial tissue regeneration, bone and dental tissue regeneration, as well as protection against bacteria, fungi and viruses. It has been found that the nano size enhances the performances of chitins and chitosans in all cases considered, with no exceptions. Biotechnological approaches will boost the applications of the said safe, eco-friendly and benign nanomaterials not only in these fields, but also for biosensors and in targeted drug delivery areas.