Influence of Solid Drug Delivery System Formulation on Poorly Water-Soluble Drug Dissolution and Permeability

Lipid-based systems with precipitation inhibitors as formulation approach to improve the drug bioavailability and/or lower its dose: a review

Lipid-based systems, such as self-microemulsifying systems (SMEDDS) are attracting strong attention as a formulation approach to improve the bioavailability of poorly water-soluble drugs. By applying the "spring and parachute" strategy in designing supersaturable SMEDDS, it is possible to maintain the drug in the supersaturated state long enough to allow absorption of the complete dose, thus improving the drug's bio-availability. As such an approach allows the incorporation of larger amounts of the drug in equal or even lower volumes of SMEDDS, it also enables the production of smaller final dosage forms as well as decreased gastrointestinal irritation, being of particular importance when formulating dosage forms for children or the elderly. In this review, the technological approaches used to prolong the drug supersaturation are discussed regarding the type and concentration of polymers used in liquid and solid SMEDDS formulation. The addition of hypromellose derivatives, vinyl polymers, polyethylene glycol, polyoxyethylene, or polymetacrylate copolymers proved to be effective in inhibiting drug precipitation. Regarding the available literature, hypromellose has been the most commonly used polymeric precipitation inhibitor, added in a concentration of 5 % (m/m). However, the inhibiting ability is mainly governed not only by the physicochemical properties of the polymer but also by the API, therefore the choice of optimal precipitation inhibitor is recommended to be evaluated on an individual basis.

Hard Gelatin Capsules Containing Hot Melt Extruded Solid Crystal Suspension of Carbamazepine for improving dissolution: Preparation and In vitro Evaluation

Aqueous solubility is one of the key parameters for achieving the desired drug concentration in systemic circulation for better therapeutic outcomes. Carbamazepine (CBZ) is practically insoluble in water, is a BCS class II drug, and exhibits dissolution-dependent oral bioavailability. This study explored a novel application of hot-melt extrusion in the manufacture and development of a thermodynamically stable solid crystal suspension (SCS) to improve the solubility and dissolution rate of CBZ. The SCSs were prepared using sugar alcohols, such as mannitol or xylitol, as crystalline carriers. The drug-sugar blend was processed by hot melt extrusion up to 40 % (w/w) drug loading. The extruded SCS was evaluated for drug content, saturation solubility, differential scanning calorimetry (DSC), Fourier-transform infrared (FTIR) spectroscopy, powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), in vitro release, and stability studies. The physicochemical characterization revealed the highly crystalline existence of pure drug, pure carriers, and extruded SCS. FTIR analysis did not reveal any physical or chemical incompatibilities between the drug and sugar alcohols and showed a homogeneous CBZ distribution within respective crystalline carriers. The SEM micrographs of the solidified SCS revealed the presence of approximately 100 μm crystalline agglomerates. In vitro dissolution and solubility studies showed that the CBZ dissolution rate and solubility were improved significantly from both crystalline carriers for all tested drug loads. The SCSs showed no significant changes in drug content, in vitro release profiles, and thermal characteristics over 3 months of storage at accelerated stability conditions (40±2°C/75±5% RH). As a result, it can be inferred that the SCS strategy can be employed as a contemporary alternative technique to improve the dissolution rate of BCS class II drugs via HME technology.

Insightful vibrational imaging study on the hydration mechanism of carbamazepine

Anhydrous carbamazepine (CBZ) is an anti-convulsant drug commonly used to treat epilepsy and relieve trigeminal neuralgia. The presence of the dihydrate form in commercial CBZ tablets can change the dissolution rate of the active pharmaceutical ingredient (API), thus decreasing its activity. The hydration transformation can occur during wet granulation or storage, within a few weeks, depending on the ambient conditions. This work aims to investigate the effect of relative humidity (RH) in the transition of pure anhydrous CBZ (CBZ III) into the hydrate form by using confocal Raman microscopy with cluster analysis (CA). Firstly, several tablets of pure CBZ III containing different amounts of CBZ DH (50%, 10%, 1%, 0.5%) were prepared and analyzed by Raman imaging with CA. Our results show that CBZ DH crystals can be detected in the CBZ III tablets, at as low a concentration as 0.5%, giving distinct Raman features for the analysed polymorphs. The stability of pure anhydrous (CBZ III) tablets was then monitored by Raman imaging at room temperature (20-22 °C) and different RH (6%, 60% and 89%). The Raman imaging with CA showed that the anhydrous CBZ tablets start to convert into the hydrate form after 48 h, and it completely changes after 120 hours (5 days) at RH 89%. The tablets exposed to RH 6% and 60% did not demonstrate the presence of CBZ DH after 1 week of exposure. The exposure time was extended for 9 months in the former, and no CBZ DH was observed. A comparative study using IR imaging was also performed, demonstrating the viability of these vibrational imaging techniques as valuable tools to monitor the hydration process of active pharmaceutical ingredients.

Mechanism of the enhancing effect of glycyrrhizin on nifedipine penetration through a lipid membrane

The saponin glycyrrhizin from liquorice root shows the ability to enhance the therapeutic activity of other drugs when used as a drug delivery system. Due to its amphiphilic properties, glycyrrhizin can form self-associates (dimers, micelles) and supramolecular complexes with a wide range of hydrophobic drugs, which leads to an increase in their solubility, stability and bioavailability. That is why the mechanism of the biological activity of glycyrrhizin is of considerable interest and has been the subject of intensive physical and chemical research in the last decade. Two mechanisms have been proposed to explain the effect of glycyrrhizin on drug bioavailability, namely, the increase in drug solubility in water and enhancement of the membrane permeability. Interest in the membrane-modifying ability of glycyrrhizic acid (GA) is also growing at present due to its recently discovered antiviral activity against SARS-CoV-2 Bailly and Vergoten (2020) [1]. In the present study, the passive permeability of the DOPC lipid membrane for the calcium channel blocker nifedipine was elucidated by parallel artificial membrane permeability assay (PAMPA) and full atomistic molecular dynamics (MD) simulation with free energy calculations. PAMPA experiments show a remarkable increase in the amount of nifedipine (NF) permeated with glycyrrhizin compared to free NF. In previous studies, we have shown using MD techniques that glycyrrhizin molecules can integrate into the lipid bilayer. In this study, MD simulation demonstrates a significant decrease in the energy barrier of NF penetration through the lipid bilayer in the presence of glycyrrhizin both in the pure DOPC membrane and in the membrane with cholesterol. This effect can be explained by the formation of hydrogen bonds between NF and GA in the middle of the bilayer.

A Mechanistic Study of Drug Mass Transport from Supersaturated Solutions Across PAMPA Membranes

There is an increasing shift from dissolution testing to dissolution-permeation testing of formulations during formulation development and this has led increasing application of permeability measurements using parallel artificial membrane permeability assay (PAMPA) membranes. However, there is a lack of thorough analysis of the impact of variabilities in the PAMPA setup on the mass flow rate outcomes, particularly for complex solubility-enabling formulations. In this study, we investigated the impact of amorphous drug-rich nanodroplets, formed in supersaturated solutions by liquid-liquid phase separation, on membrane transport by measuring mass flow rate across PAMPA membranes. In addition, we explored the impact of PAMPA variants such as lipid composition, hydrophobicity and pore size of the filter support, as well as receiver sink properties on membrane mass flow rates of solutions containing amorphous nanodroplets. Filter properties and lipid composition did not show a notable influence on the mass flow rates for lipophilic molecules, while a marked impact was observed for hydrophilic molecules. High sink conditions in the receiver compartment, arising from addition of micellar surfactant, altered the membrane integrity for lipid-impregnated hydrophilic membranes. In contrast, no such effect was observed for a hydrophobic filter support. Membrane integrity tests also suggested that monitoring water transport may be an improved approach over using Lucifer yellow. Furthermore, high sink conditions in the receiver compartment resulted in an increase in the overall mass flow rate. This was due to the effect of asymmetric conditions, generated across the membrane, on mass transport kinetics. Linearity between mass flow rate and donor concentration was observed until the donor concentration reached the amorphous solubility. Above the amorphous solubility, a gradual increase in mass flow rate was observed i.e., with an increasing number of nanodroplets in the solution. This was attributed to decrease in the permeability barrier across unstirred water layer due to reduction of the concentration gradient as nanodroplets dissolved to replenish absorbed drug. Observations made in this study provide insights into the mechanisms associated with mass transport of supersaturated solutions across PAMPA membranes, which are critical for improved evaluation of enabling formulations.

Topical Nanoemulgel for the Treatment of Skin Cancer: Proof-of-Technology

The present study is a mechanistic validation of ‘proof-of-technology’ for the effective topical delivery of chrysin nanoemulgel for localized, efficient treatment of melanoma-affected skin. Background: Currently available treatments for skin cancer are inefficient due to systemic side effects and poor transcutaneous permeation, thereby presenting a formidable challenge for the development of novel nanocarriers. Methods: We opted for a novel approach and formulated a nanocomplex system composed of hydrophobic chrysin dissolved in a lipid mix, which was further nanoemulsified in Pluronic^® F-127 gel to enhance physicochemical and biopharmaceutic characteristics. Chrysin, a flavone extracted from passion flowers, exhibits potential anti-cancer activities; however, it has limited applicability due to its poor solubility. Pseudo-ternary phase diagrams were constructed to identify the best self-nanoemulsifying region by varying the compositions of oil, Caproyl^® 90 surfactant, Tween^® 80, and co-solvent Transcutol^® HP. Chrysin-loaded nanoemulsifying compositions were characterized for various physicochemical properties. Results: This thermodynamically stable, self-emulsifying drug delivery system showed a mean droplet size of 156.9 nm, polydispersity index of 0.26, and viscosity of 9100 cps after dispersion in gel. Mechanical characterization using Texture Analyzer exhibited that the gel had a hardness of 487 g and adhesiveness of 500 g. Ex vivo permeation through rat abdominal skin revealed significant improvement in percutaneous absorption measured as flux, the apparent permeability coefficient, the steady-state diffusion coefficient, and drug deposition. In vitro cytotoxicity on A375 and SK-MEL-2 cell lines showed a significantly improved therapeutic effect, thus ensuring reduction in dose. The safety of the product was established through biocompatibility testing on the L929 cell line. Conclusion: Aqueous, gel-based, topical, nanoemulsified chrysin is a promising technology approach for effective localized transcutaneous delivery that will help reduce the frequency and overall dose usage and ultimately improve the therapeutic index.

Biowaiver Monograph for Immediate-Release Solid Oral Dosage Forms: Carbamazepine

Literature relevant to assessing whether BCS-based biowaivers can be applied to immediate release (IR) solid oral dosage forms containing carbamazepine as the single active pharmaceutical ingredient are reviewed. Carbamazepine, which is used for the prophylactic therapy of epilepsy, is a non-ionizable drug that cannot be considered "highly soluble" across the range of pH values usually encountered in the upper gastrointestinal tract. Furthermore, evidence in the open literature suggests that carbamazepine is a BCS Class 2 drug. Nevertheless, the oral absolute bioavailability of carbamazepine lies between 70 and 78% and both in vivo and in vitro data support the classification of carbamazepine as a highly permeable drug. Since the therapeutic and toxic plasma level ranges overlap, carbamazepine is considered to have a narrow therapeutic index. For these reasons, a BCS based biowaiver for IR tablets of carbamazepine cannot be recommended. Interestingly, in nine out of ten studies, USP dissolution conditions (900 mL water with 1% SLS, paddle, 75 rpm) appropriately discriminated among bioinequivalent products and this may be a way forward to predicting whether a given formulation will be bioequivalent to the comparator product.

Orally Administered Drug Solubility-Enhancing Formulations: Lesson Learnt from Optimum Solubility-Permeability Balance

Although oral drug delivery is considered as most acceptable route for administering the active pharmaceutical ingredients to patients of all age-groups with the exceptions of bed-ridden patients and infants, the extent and rate of drug reaching the systemic circulation (in other word, drug bioavailability) always depends on many factors such as drug solubility in gastrointestinal fluids and drug permeation into intraluminal epithelial membrane structure, absence (fasting state) and presence (fed state) of food materials in the gastrointestinal tract, and individual variations in gastric emptying time. Taking the most influential factors like drug solubility and its permeability into consideration, these two factors play a pivotal role and even act as the litmus test for the formulation scientists who involve in oral dosage form development. It is very clear that there should be an optimum solubility and permeability balance to be reachable for getting the desired drug bioavailability to exert the intended therapeutic activity. The objectives of current review are (1) to provide an overview of two-different categories of poorly water soluble API molecules, (2) to describe briefly three-different case studies taken from drug solubility-enhancing formulations dealing with interplay between solubility and permeability, and (3) to showcase selected examples of solubility-permeability interplay phenomena arising out from the various orally administrable dosage forms. The lessons learnt from the past and current literatures are certainly encouraging to go ahead for oral dosage form development but with the prior knowledge about the possible existence of solubility-permeability interplay/tradeoff phenomenon.

Investigating Cocrystallization of Carbamazepine with Structurally Compatible Coformers: New Cocrystal and Eutectic Phases with Enhanced Dissolution

In this work, carbamazepine (CBZ), an anticonvulsant drug was cocrystallized with several structurally complement coformers (coformers with amide, acid and hydrazide functional groups) to enhance its dissolution. CBZ formed a cocrystal phase with acetamide (ACE) when mixtures of CBZ and ACE (containing CBZ mole fractions, X_CBZ of 0.25, 0.33, 0.5, and 0.67) were subjected to solid-state grinding (SSG), evaporative crystallization (EC), slurry conversion (SC), and slow cooling crystallization (SLC). Upon heating, the CBZ-ACE cocrystal phase formed from CBZ-ACE mixtures containing X_CBZ of 0.25, 0.33 and 0.67 underwent solid-state phase transition to CBZ form I and CBZ cocrytsal phase obtained from the CBZ-ACE mixture containing X_CBZ of 0.5 converted to CBZ form III. Interestingly, slow cooling cocrystallization experiments resulted in crystallization of a cocrystal as well as the CBZ dihydrate forms. The powder dissolution studies demonstrated that among the different CBZ-ACE-SSG cocrystal phases, CBZ-ACE-SSG-X_CBZ-0.33 cocrystal exhibited 7.47 times improved dissolution whereas the CBZ eutectic phase with nicotinic acid hydrazide (NAH) exhibited 4.93 times increased dissolution when compared to raw CBZ.

Organic Salts Based on Isoniazid Drug: Synthesis, Bioavailability and Cytotoxicity Studies

Tuberculosis is one of the ten causes of morbidity and mortality worldwide caused by Mycobacterium tuberculosis complex. Some of the anti-tuberculosis drugs used in clinic studies, despite being effective for the treatment of tuberculosis, present serious adverse effects as well as poor bioavailability, stability, and drug-resistance problems. Thus, it is important to develop approaches that could provide shorter drug regimens, preventing drug resistance, toxicity of the antibiotics, and improve their bioavailability. Herein, we reported the use of organic salts based on the isoniazid drug, which can act as an organic cation combined with suitable organic anions such as alkylsulfonate-based (mesylate, R or S-Camphorsulfonate), carboxylate-based (glycolate, vanylate) and sacharinate. The synthesis, characterization, and cytotoxicity studies comparing with the original isoniazid drug have been performed. The possibility to explore dicationic salts seems promising in order to improve original bioavailability, and promote the elimination of polymorphic forms as well as higher stability, which are relevant characteristics that the pharmaceutical industry pursues.

Amelioration of lipophilic compounds in regards to bioavailability as self-emulsifying drug delivery system (SEDDS)

Background

High lipophilicity and poor aqueous solubility are the endemic problems of new drug molecules. Sixty to seventy percent of these drugs are unable to solubilize completely in aqueous media, or have very low permeability. This hampers their oral absorption and further leads to their poor bioavailability. Various researches are in progress to overcome these limitations. Novel technologies like nano-carrier systems have become popular for improving the solubility of drugs.

Main body

Lipid-based formulations, among nano systems, are taking pace for the enhancement of solubility, oral absorption, and hence the bioavailability of drugs. Among the lipid formulations, self-emulsification systems are gaining popularity by offering various advantages to delivery systems. Self-emulsifying drug delivery systems (SEDDS) are isotropic blends of oil and surfactant/co-surfactants. These ingredients upon gentle agitation in aqueous media results in the formation of o/w emulsion. In spite of many works published in SEDDS, the major concerns of this article are to discuss the various approaches to formulate a good lipid-based carrier system for poorly aqueous soluble drugs, role of various polymers, and their categories used in the formulation along-with the modern technologies used for enhancing the stability of liquid SEDDS. This review majorly focuses upon the problems related to the poor aqueous solubility of the newer lipid molecules and the solutions to overcome their solubility and in addition bioavailability.

Conclusion

As per the researches done in formulation and optimization of SEDDS for the enhancement of bioavailability of lipophilic molecules, it can be stated that the aqueous solubility as well as bioavailability can be increased by many folds compared to their marketed or other oral formulations.

Vibrational Dynamics of Carbamazepine: Studies Based on Two-Dimensional Correlation Spectroscopy and X-ray Diffraction

Fourier transform infrared spectroscopy as well as X-ray diffraction (XRD) were employed to thoroughly study phase transitions taking place during heating-cooling-heating cycle of carbamazepine (CBZ), a well known and commonly used antiepileptic drug. Both techniques revealed cold crystallization taking place during second heating. Moreover, XRD studies for the first time proved the coexistence of CBZ (form I) and iminostilbene (product of the degradation of CBZ) after a heating-cooling cycle. Moving window two-dimensional correlation (MW 2D-COS) spectroscopy and two-dimensional correlation spectroscopy were shown to be effective tools to reveal phase sequences and to provide information about the order of sequential changes of bands' intensities during each phase transition, respectively.

Modulating tumor immunity by metronomic dosing of oxaliplatin incorporated in multiple oral nanoemulsion

In this study, a system for oral delivery of oxaliplatin (OXA) was prepared for metronomic chemotherapy to enhance antitumor efficacy and modulate tumor immunity. OXA was complexed with N^α-deoxycholyl-l-lysyl-methylester (DCK) (OXA/DCK) and formulated as a nanoemulsion (OXA/DCK-NE). OXA/DCK-NE showed 3.35-fold increased permeability across a Caco-2 cell monolayer, resulting in 1.73-fold higher oral bioavailability than free OXA. In addition, treatment of the B16F10.OVA cell line with OXA/DCK-NE resulted in successful upregulation of immunogenic cell death (ICD) markers both in vitro and in vivo. In a B16F10.OVA tumor-bearing mouse model, treatment with OXA/DCK-NE substantially impeded tumor growth by 63.9 ± 13.3% compared to the control group, which was also greater than the intravenous (IV) OXA group. Moreover, treatment with a combination of oral OXA/DCK-NE and anti-programmed cell death protein-1 (αPD-1) antibody resulted in 78.3 ± 9.67% greater inhibition compared to controls. More important, OXA/DCK-NE alone had immunomodulatory effects, such as enhancement of tumor antigen uptake, activation of dendritic cells in tumor-draining lymph nodes, and augmentation of both the population and function of immune effector cells in tumor tissue as well as in the spleen; no such effects were seen in the OXA IV group. These observations provide a rationale for combining oral metronomic OXA with immunotherapy to elicit synergistic antitumor effects.

Applications of Fourier transform infrared spectroscopy to pharmaceutical preparations

Introduction: Various pharmaceutical preparations are widely used for clinical treatment. Elucidation of the mechanisms of drug release and evaluation of drug efficacy in biological samples are important in drug design and drug quality control.Areas covered: This review classifies recent applications of Fourier transform infrared (FTIR) spectroscopy in the field of medicine to comprehend drug release and diffusion. Drug release is affected by many factors of preparations, such as drug delivery system and microstructure polymorphism. The applications of FTIR imaging and nano-FTIR technique in biological samples lay a foundation for studying drug mechanism in vivo.Expert opinion: FTIR spectroscopy meets the research needs on preparations to understand the processes and mechanisms underlying drug release. The combination of attenuated total reflectance-FTIR imaging and nano-FTIR accompanied by chemometrics is a potent tool to overcome the deficiency of conventional infrared detection. FTIR shows an enormous potential in drug characterization, drug quality control, and bio-sample detection.

Nanoformulation strategies for improving intestinal permeability of drugs: A more precise look at permeability assessment methods and pharmacokinetic properties changes

The therapeutic efficacy of orally administered drugs is often restricted by their inherent limited oral bioavailability. Low water solubility, limited permeability through the intestinal barrier, instability in harsh environment of the gastrointestinal (GI) tract and being substrate of the efflux pumps and the cytochrome P450 (CYP) can impair oral drug bioavailability resulting in erratic and variable plasma drug profile. As more drugs with low membrane permeability are developed, new interest is growing to enhance their intestinal permeability and bioavailability. A wide variety of nanosystems have been developed to improve drug transport and absorption. Sufficient evidence exists to suggest that nanoparticles are able to increase the transepithelial transport of drug molecules. However, key questions remained unanswered. What types of nanoparticles are more efficient? What are preclinical (or clinical) achievements of each type of nanoformulation in terms of pharmacokinetic (PK) parameters? Addressing this issue in this paper, we have reviewed the current literature regarding permeability enhancement, permeability assessment methods and changes in PK parameters following administration of various nanoformulations. Although permeability enhancement by various nanoformulations holds great promise for oral drug delivery, many challenges still need to be addressed before development of more clinically successful nanoproducts.

Enhanced oral bioavailability and anti-diabetic activity of canagliflozin through a spray dried lipid based oral delivery: a novel paradigm

AIM

Canagliflozin (CFZ), a novel SGLT II antagonist, exhibits erratic absorption after oral administration. The current study entails development and evaluation of spray dried lipid based formulation (solid SMEDDS) for enhancing oral bioavailability and anti-diabetic activity of CFZ.

METHODS

Solid SMEDDS developed through spray drying containing Neusilin US2 as an adsorbent. The formed solid SMEDDS were characterized for physicochemical and solid state attributes. Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) were used to confirm the spherical morphology. In vitro dissolution, ex vivo permeability and in vivo pharmacokinetic studies were conducted to determine the release rate, permeation rate and absorption profile of CFZ, respectively. Pharmacodynamic studies were done as per standard protocols.

RESULTS

The optimized solid SMEDDS exhibited acceptable practical yield and flow properties and is vouched with enhanced amorphization, nanoparticulate distribution and acceptable drug content. The spherical morphology of solid SMEDDS and reconstituted SMEDDS were confirmed in SEM and TEM, respectively. In vitro dissolution studies revealed multi-fold release behavior in CFZ in various dissolution media, whereas, remarkable permeability was observed in jejunum segment of rat intestine. Pharmacokinetic studies of CFZ in solid SMEDDS demonstrated 2.53 and 1.43 fold enhancement in C_max and 2.73 and 1.98 fold in AUC _0-24h, as compared to pure API and marketed formulation, respectively. Pharmacological evaluation of solid SMEDDS revealed enhanced anti-diabetic activity of CFZ through predominant SGLT II inhibition in rats, as evident from evaluation of biochemical levels, urinary glucose excretion studies and SGLT II expression analysis.

CONCLUSION

The current work describes significant improvement biopharmaceutical properties of CFZ in solid SMEDD formulation. Graphical abstract Graphical Abstract: Enhanced oral bioavailability and anti-diabetic activity of canagliflozin through a spray dried lipid based oral delivery: a novel paradigm.

In-Vitro and In-Vivo Evaluation of Supersaturable Self-Nanoemulsifying Drug Delivery System (SNEDDS) of Dutasteride

OBJECTIVE

A novel, Supersaturable Self-Nanoemulsifying Drug Delivery System (S-SNEDDS) has been prepared to improve the Dutasteride's poor aqueous solubility.

METHODS

By adding Hydroxy Propyl Methyl Cellulose (HPMC) as a precipitation inhibitor to conventional SNEDDS, a supersaturable system was prepared. Firstly, the prepared SNEDDS played an important role in increasing the aqueous solubility and hence oral absorption due to nano-range size. Secondly, the S-SNEDDS found to be advantageous over SNEDDS for having a higher drug load and inhibition of dilution precipitation of Dutasteride. Formulated S-SNEDDS (F1-F9) ranged from 37.42 ± 1.02 to 68.92 ± 0.09 nm with PDI 0.219-0.34 and drug loading of over 95 percent.

RESULTS

The study of in-vitro dissolution revealed higher dissolution for S-SNEDDS compared to SNEDDS and Avodart soft gelatin capsule as a commercial product. In addition, higher absorption was observed for S-SNEDDS showing approximately 1.28 and 1.27 fold AUC (0-24h) and Cmax compared to commercial products. Therefore, S-SNEDDS has proven as a novel drug delivery system with a higher drug load, higher self-emulsification efficiency, higher stability, higher dissolution and pronounced absorption.

CONCLUSION

In conclusion, S-SNEDDS could be a newly emerging approach to enhance aqueous solubility in many folds for drugs belonging to BCS Class II and IV and thus absorption and oral bioavailability.

New Insight Into Thermodynamical Stability of Carbamazepine

Carbamazepine (CBZ)-an antiepileptic drug-belongs to Biopharmaceutics Classification System II Class. It has low solubility and consequently limited bioavailability. One of the ways to improve drugs solubility is amorphization of their structure. Herein, cooling CBZ-at different cooling rates-was investigated as a way to obtain glassy, better soluble form. During preliminary differential scanning calorimetry experiments, some peculiar behavior of the examined material, different from those stated in the literature, was observed. Further investigations using differential scanning calorimetry, thermogravimetric analysis, and polarizing optical microscope revealed that decomposition temperature of CBZ is about 30°C lower than previously assumed. Moreover, high-resolution thermogravimetric measurements indicate that some decomposition processes could start even below the temperature reported as the melting point of the form I of CBZ.

Properties of Therapeutic Deep Eutectic Solvents of l-Arginine and Ethambutol for Tuberculosis Treatment

The treatment for tuberculosis infection usually involves a prolonged regimen of multiple antibacterial drugs, which might lead to various secondary effects. For preventing drug resistance and side-effects of anti-tuberculosis drugs, new methods for improving the bioavailability of APIs were investigated. The strategy proposed consists of the preparation of therapeutic deep eutectic solvents (THEDES), that incorporate l-arginine and ethambutol. The eutectic mixtures were prepared by mixing the components at a certain molar ratio, until a clear liquid solution was formed. The prepared mixtures were characterized by differential scanning calorimetry (DSC), polarized optical microscopy (POM) and nuclear magnetic resonance spectroscopy (¹H and ¹³C-NMR). The solubility and permeability of the drugs when they are in the THEDES form was evaluated at 37 °C, in phosphate buffered saline (PBS). Solubility studies showed an increase of the solubility of ethambutol when incorporated in the eutectic system. The cytotoxicity was evaluated using a model cell line (Caco-2), comparing the cytotoxicity of the API incorporated in the eutectic system. We observed that the cell viability in the THEDES was affected by the presence of citric acid, and higher cytotoxicity values were observed. Nonetheless, these findings do not compromise the possibility to use these systems as new delivery systems for ethambutol and arginine.

Armamentarium of nanoscaled lipid drug delivery systems customized for oral administration: In silico docking patronage, absorption phenomenon, preclinical status, clinical status and future prospects

Poor drug solubility and bioavailability remain a significant and frequently encountered concern for pharmaceutical scientists. Nanoscaled lipid drug delivery systems (NSLDDS) have exhibited great potentials in oral delivery of poorly water-soluble drugs, primarily for lipophilic drugs, with several successful clinical products. In the past few years, we have find out that optimized composition of drug in lipid, surfactant, or mixture of lipid and surfactant omits the solubility, permeability and bioavailability issues, which are potential limitations for oral absorption of poorly water-soluble drugs. Lipids not only vary in structures and physiochemical properties, but also in their digestibility and absorption pathway; therefore selection of lipid excipients and dosage form has a pronounced effect on biopharmaceutical aspects of drug absorption and distribution both in vitro and in vivo. Therefore, in current critical review, a comprehensive overview of the different lipid based nanostructured drug delivery systems intended for oral administration has been presented. In addition, implication of in silico docking in designing of NSLDDS as well as mechanism of absorption of different lipid based nanoformulations through intestinal absorption window has also been offered. Moreover, attention has also been paid to NSLDDS that are currently undergoing preclinical or clinical analysis.

Measuring the emulsification dynamics and stability of self-emulsifying drug delivery systems

Self-emulsifying drug delivery systems (SEDDS) are one of the most promising technologies in the drug delivery field, particularly for addressing solubility and bioavailability issues of drugs. The development of these drug carriers excessively relies in visual observations and indirect determinations. The present manuscript intended to describe a method able to measure the emulsification of SEDDS, both micro and nano-emulsions, able to measure the droplet size and to evaluate the physical stability of these formulations. Additionally, a new process to evaluate the physical stability of SEDDS after emulsification was also proposed, based on a cycle of mechanical stress followed by a resting period. The use of a multiparameter continuous evaluation during the emulsification process and stability was of upmost value to understand SEDDS emulsification process. Based on this method, SEDDS were classified as fast and slow emulsifiers. Moreover, emulsification process and stabilization of emulsion was subject of several considerations regarding the composition of SEDDS as major factor that affects stability to physical stress and the use of multicomponent with different properties to develop a stable and robust SEDDS formulation. Drug loading level is herein suggested to impact droplets size of SEDDS after dispersion and SEDDS stability to stress conditions. The proposed protocol allows an online measurement of SEDDS droplet size during emulsification and a rationale selection of excipients based on its emulsification and stabilization performance.

Lipid-based nanosystem of edaravone: development, optimization, characterization and in vitro/in vivo evaluation

Edaravone (EDR) is a well-recognized lipophilic free radical scavenger for diseases including neurodegenerative disease, cardiovascular disease, and cancer. However, its oral use is restricted due to poor oral bioavailability (BA). The aim of present research was to enable its oral use by developing a lipid-based nanosystem (LNS). The components of LNS including oil, surfactants, and co-surfactants were selected based on their potential to maximize the solubilization in gastrointestinal (GI) fluids, reduce its glucuronidation and improve transmembrane permeability. The liquid LNS (L-LNS) with Capryol™ PGMC (Oil), Cremophor® RH 40:Labrasol®:TPGS 1000 (1:0.8:0.2) (Surfactant) and Transcutol P® (Co-surfactant) were optimized to form microemulsion having droplet size (16.25 nm), polydispersity index (0.039), % Transmittance (99.85%), and self-emulsification time (32 s). It significantly improved the EDR loading as well as its metabolism and permeability profile during transport across the GI tract. To overcome the possible drawbacks of L-LNS, Aerosil® 200 was used to formulate solid LNS (S-LNS), and its concentration was optimized based on flow properties. S-LNS possessed all quality attributes of L-LNS confirmed by solid-state characterization, reconstitution ability, and stability study. The dissolution rate of EDR was significantly enhanced with L-LNS and S-LNS in simulated gastric, and intestinal fluids. The pharmacokinetic study revealed significant improvement in relative BA, Cmax, and t1/2 with L-LNS and S-LNS against EDR suspension. Moreover, S-LNS showed superior cellular uptake and neuroprotective effect compared to EDR in SH-SY5Y695 cell line. An appropriate selection of the components of LNS could enable effective oral delivery of challenging therapeutics that are conventionally used by the parenteral administration.

Solubility and in vitro drug permeation behavior of ethenzamide cocrystals regulated in physiological pH environments

Drug release behavior of few ethenzamide cocrystals was investigated at different pH buffers. Change in lipophilic behavior and conformational adjustment of drug along with supramolecular synthons were probed for their improved drug efficacy.

Study on the physicochemical properties and anti-inflammatory effects of paeonol in rats with TNBS-induced ulcerative colitis

Paeonol, an active component from Paeonia suffruticosa Andr., has a variety of biological activities, such as vascular endothelial cell protection, anti-oxidation, and anti-inflammation. The aim of this study was to investigate the basic physicochemical properties of paeonol, including solubility, oil-water partition coefficient, and permeability. Then evaluated the anti-inflammatory effects of paeonol were evaluated on 2,4,6-trinitrobenzenesulfonic acid-induced ulcerative colitis in rats. The rats were divided randomly into 6 groups, namely, normal, model, paeonol-treated (100, 200, and 400mg/kg), and positive. Each group had 10 rats. Inhibition effects were evaluated by the disease activity index (DAI), colon weight/length ratio, as well as macroscopical and histological evaluations. Serum interleukin (IL)-17, IL-6 and transforming growth factor beta 1 (TGF-β1) levels were determined by enzyme-linked immunosorbent assay. The solubility and oil-water partition coefficient of paeonol in different phosphate buffer solutions were 284.06-598.23 and 461.97-981.17μg/mL, respectively. The effective passive permeability value Pe was 23.49×10^-6cm/s. In terms of anti-inflammatory results, compared with the model group, treatment with 200 and 400mg/kg doses of paeonol had significantly decreased DAI, colon weight/length ratio, and macroscopic and histopathological scores. Furthermore, the serum levels of IL-17 and IL-6 were significantly reduced, whereas the TGF-β1 level was increased in the two paeonol-treated groups (medium- and high-dose group). Therefore, paeonol had poor water solubility, but oral absorption was good. In addition, paeonol had therapeutic effects on ulcerative colitis, and the therapeutic efficacy was dose dependent. The results presented in this study provide evidence for the development of a novel therapeutic agent in the treatment of UC. However, whether this agent could have therapeutic benefit or adverse effects in human IBD remains to be fully explored.

Effect of Cyclodextrin Types and Co-Solvent on Solubility of a Poorly Water Soluble Drug

The aim of the study was to investigate the solubility of piroxicam (Prx) depending on the inclusion complexation with various cyclodextrins (CDs) and on ethanol as a co-solvent. The phase-solubility method was applied to determine drug solubility in binary and ternary systems. The results showed that in systems consisting of the drug dissolved in ethanol–water mixtures, the drug solubility increased exponentially with a rising concentration of ethanol. The phase solubility measurements of the drug in aqueous solutions of CDs, β-CD and γ-CD exhibited diagrams of A_L-type, whereas 2,6-dimethyl-β-CD revealed A_P-type. The destabilizing effect of ethanol as a co-solvent was observed for all complexes regardless of the CD type, as a consequence of it the lowering of the complex formation constants. In systems with a higher concentration of ethanol, the drug solubility was increased in opposition to the decreasing complex formation constants. According to this study, the type of CDs played a more important role on the solubility of Prx, and the use of ethanol as a co-solvent exhibited no synergistic effect on the improvement of Prx solubility. The Prx solubility was increased again due to the better solubility in ethanol.

In vitro screening of nanomedicines through the blood brain barrier: A critical review

The blood-brain barrier accounts for the high attrition rate of the treatments of most brain disorders, which therefore remain one of the greatest health-care challenges of the twenty first century. Against this background of hindrance to brain delivery, nanomedicine takes advantage of the assembly at the nanoscale of available biomaterials to provide a delivery platform with potential to raising brain levels of either imaging or therapeutic agents. Nevertheless, to prevent later failure due to ineffective drug levels at the target site, researchers have been endeavoring to develop a battery of in vitro screening procedures that can predict earlier in the drug discovery process the ability of these cutting-edge drug delivery platforms to cross the blood-brain barrier for biomedical purposes. This review provides an in-depth analysis of the currently available in vitro blood-brain barrier models (both cell-based and non-cell-based) with the focus on their suitability for understanding the biological brain distribution of forthcoming nanomedicines. The relationship between experimental factors and underlying physiological assumptions that would ultimately lead to a more predictive capacity of their in vivo performance, and those methods already assayed for the evaluation of the brain distribution of nanomedicines are comprehensively discussed.