Immobilization of Metal Hexacyanoferrate Ion-Exchangers for the Synthesis of Metal Ion Sorbents--A Mini-Review

Fabrication of magnetite/GO/potassium copper hexacyanoferrate nanocomposite for removal of radioactive cesium ions

Metal hexacyanoferrates (MHCF) are a class of inorganic adsorbents used for wastewater management due to the presence of interstitial sites for capturing heavy metal ions. In present work, we are reporting the synthesis of magnetic nanocomposite of Fe3O4/graphene oxide/potassium copper hexacyanoferrate via wet chemical and coprecipitation approach. Potassium copper hexacyanoferrate (KCuHCF) and Graphene oxide (GO) both are marvelous adsorbents but their nano-size becomes a major obstacle in their separation process after the adsorption of the radionuclides. Thus, our synthesized nanocomposite Fe3O4/GO/KCuHCF enhances the recovery of KCuHCF even after radioactive Cs+ adsorption with adsorption capacity of 18 mg g-1 coinciding well with the Langmuir adsorption isotherm mechanism. The synthesized adsorbent is characterized thoroughly using UV-Visible spectroscopy, FT-IR, TGA, XPS, Raman spectroscopy, TEM-EDAX and XRD. This synthesized nanocomposite is used for the batch extraction of radioactive Cs+ from low level radioactive waste (LLW). The extraction kinetics followed pseudo-second-order kinetics mechanism.

Decorporation dilemma: Interplay of prussian blue and potassium iodide in radioactive contamination

The expansion of the nuclear industry has led to various radioactive effluents, originating from routine operations or catastrophic incidents such as those at Three Mile Island (USA), Chernobyl (Ukraine), and Fukushima (Japan). Research conducted after these events emphasizes Cesium-137 (137Cs) and iodine 131 (131I) as major contributors to harmful airborne dispersion and fallout. These isotopes infiltrate the human body via inhalation, ingestion, or wounds, posing significant health risks. Understanding contamination mechanisms and devising effective countermeasures are crucial in mitigating nuclear incident consequences. We propose that concurrent administration of Pru-Decorp™/Pru-Decorp-MG and potassium iodide (KI) could synergistically reduce the levels of 137Cs and block uptake of 131I, respectively, in nuclear incident scenarios. Pru-Decorp™ capsules contain insoluble ferric hexacyanoferrate(II) and are equivalent to USFDA-approved Radiogardase®-Cs, offering radiation exposure mitigation for Cs and Tl contamination. Pru-Decorp-MG capsules consist of insoluble PB and magnesium hydroxide, serving as a prophylactic measure to reduce the risk of internal Cs and Tl contamination for rescue responders. Pru-Decorp™/Pru-Decorp-MG binds Cs/Tl ions in the gastrointestinal tract, hindering absorption and promoting excretion, while KI saturates the thyroid gland with stable iodine, decreasing the uptake of radioactive iodine isotopes. Our hypothesis is supported by studies demonstrating the effectiveness of combination therapies, such as calcium alginate, iron(III) ferrocyanide, and KI, in decreasing the retention of radioisotopes in vital organs. To test this hypothesis, we propose a comprehensive research plan, including in vitro studies simulating gastrointestinal conditions, animal studies to evaluate the efficacy of both drugs simultaneously, and safety clinical trials comparing Pru-Decorp™/Pru-Decorp-MG alone, KI alone, and their combination. Expected outcomes include insights into the synergistic effects of Pru-Decorp™/Pru-Decorp-MG and KI, guiding the development of optimized treatment protocols for simultaneous administration during radioactive contamination incidents. This research aims to address significant critical gaps in nuclear incident preparedness by providing evidence-based recommendations for concurrent antidote use in scenarios involving multiple isotope contamination. Ultimately, this will enhance public health and safety during nuclear emergencies.

Radionuclides' Recovery from Seawater Using FIC and FIC A Sorbents

To solve radioecological and oceanological problems (estimate the vertical transport, flows of particulate organic carbon, phosphorus biodynamics, submarine groundwater discharge, etc.), it is necessary to determine the natural values of the radionuclides' activity in seawater and particulate matter. For the first time, the radionuclides' sorption from seawater was studied using sorbents based on activated carbon modified with iron(III) ferrocyanide (FIC) and based on activated carbon modified with iron(III) hydroxide (FIC A-activated FIC) obtained by FIC sorbent treatment with sodium hydroxide solution. The possibility of trace amounts of phosphorus, beryllium, and cesium recovery in laboratory conditions has been investigated. Distribution coefficients, dynamic, and total dynamic exchange capacities were determined. The physicochemical regularities (isotherm and kinetics) of sorption have been studied. The results obtained are characterized via Langmuir, Freindlich, and Dubinin-Radushkevich isotherm equations, as well as pseudo-first and pseudo-second-order kinetic models, intraparticle diffusion, and the Elovich model. Under expeditionary conditions, the sorption efficiency of 137Cs using FIC sorbent, 7Be, 32P, and 33P-using FIC A sorbent with a single-column method by adding a stable tracer, as well as the sorption efficiency of radionuclides 210Pb and 234Th with their natural content by FIC A sorbent in a two-column mode from large volumes of seawater was assessed. High values of efficiency of their recovery by the studied sorbents were achieved.

Nanodispersion of ferrocianides for purification of man-made contaminated water containing caesium

A method of obtaining a nanodispersion of nickel-potassium ferrocyanides intended for purification of man-made polluted waters is proposed. It is applicable to purify effluent and floor drain water at nuclear power plants, which contains caesium, strontium, cobalt, manganese and other transition metals. The optimal conditions for the synthesis of nanodispersion have been determined, which is represented by clusters of nanoparticles associated with water molecules and nitrates dispersed in a dilute solution of nickel and potassium nitrates. On the surface of the formed nanocrystals there are fragments of structures of smaller formations. The mechanism of sorption of ions of alkali, alkaline earth and transition metals is investigated considering the ion charge density. The effect of competing ions (strontium, cobalt, manganese) on the sorption of caesium is taken into account. An integrated method of purification of multi-component man-made solutions including drainage waters of nuclear power plants is based on the use of nanodispersion of nickel-potassium ferrocyanides in combination with bentonite clay, which allows removing caesium from the drainage simulator with an efficiency of 96%, and strontium and transition metal ions (cobalt, manganese, copper, iron) with an efficiency of at least 98%.

Immobilization of 137Cs as a crystalline pollucite surrounded by amorphous aluminosilicate

To date, radiocesium (¹³⁷Cs) has been considered stable in the form of pollucite mineralized through high-temperature heat treatment. This study presented a possibility through experimental results that the entire medium exists as amorphous aluminosilicate at a relatively low temperature, but cesium is partially and preferentially converted from a composite adsorbent into pollucite. Cesium lowers the eutectic point within the system and initiates the nucleation of pollucite prior to other elements. We confirmed that the partial mineral phase of cesium showed the same chemical stability as when the entire medium was converted to pollucite. X-ray absorption spectroscopy provided direct evidence for this phenomenon; also, the stability results of radioactive cesium shown through a series of sintering experiments supported the conclusion. This method can be applied as a method to immobilize radioactive cesium under relatively mild temperature conditions of atmospheric pressure, while eliminating the problem of diffusion due to its volatilization.

Iron-Vanadium Incorporated Ferrocyanides as Potential Cathode Materials for Application in Sodium-Ion Batteries

Sodium-ion batteries (SIBs) are potential replacements for lithium-ion batteries owing to their comparable energy density and the abundance of sodium. However, the low potential and low stability of their cathode materials have prevented their commercialization. Prussian blue analogs are ideal cathode materials for SIBs owing to the numerous diffusion channels in their 3D structure and their high potential vs. Na/Na⁺. In this study, we fabricated various Fe-V-incorporated hexacyanoferrates, which are Prussian blue analogs, via a one-step synthesis. These compounds changed their colors from blue to green to yellow with increasing amounts of incorporated V ions. The X-ray photoelectron spectroscopy spectrum revealed that V³⁺ was oxidized to V⁴⁺ in the cubic Prussian blue structure, which enhanced the electrochemical stability and increased the voltage platform. The vanadium ferrocyanide Prussian blue (VFPB1) electrode, which contains V⁴⁺ and Fe²⁺ in the Prussian blue structure, showed Na insertion/extraction potential of 3.26/3.65 V vs. Na/Na⁺. The cycling test revealed a stable capacity of ~70 mAh g^-1 at a rate of 50 mA g^-1 and a capacity retention of 82.5% after 100 cycles. We believe that this Fe-V-incorporated Prussian green cathode material is a promising candidate for stable and high-voltage cathodes for SIBs.

Polyethylenimine as a Non-Innocent Ligand for Hexacyanoferrates Immobilization

To understand how polyethyleneimine (PEI), as a ligand, affects structure and properties of the transition metals hexacyanoferrates (HCFs) immobilized in cross-linked PEI matrix, we have synthesized Cu(II), Zn(II), and Fe(III) HCFs via successive ion-exchange reactions with metal salts and K₄[Fe^II(CN)₆] or K₃[Fe^III(CN)₆]. The structure and properties of the obtained materials in comparison with the crystalline HCF analogs were investigated with FT-IR, Mössbauer, and UV-Vis spectroscopy. Complete reduction of Fe(III) to Fe(II) by PEI in HCF(III) was confirmed. When synthesis was performed at pH favoring binding of precursor metal ions by PEI, cyano-bridged hybrids rather than polymer-HCFs composites were formed. Although the obtained hybrids did not demonstrate sorption activity toward cesium ions, known for crystalline HCFs, they are of interest for the other applications. SQUID measurements revealed a significant difference in magnetic properties of PEI-HCFs hybrids in comparison with crystalline HCFs. Due to the Fe(III) to Fe(II) reduction in HCF ions, Cu(II) and Fe(III) HCFs(III) lost the molecular magnets properties in PEI matrix, but magnetic ordering, including ferromagnet-antiferromagnet interactions, was observed in all hybrids over the broad temperature range.

Effective removal of sodium ion as efflorescence at soil surface using ammonium salts

The existing methods for reclamation of saline-sodic soils are expensive, time-consuming, and require skilled engineering approaches. Therefore, new and fast techniques should be developed for the reclamation of these soils. This study was undertaken to evaluate if harvesting excessive salts via the soil with ammonium hexacyanoferrate (II) (AH) and ammonium perchlorate (AP) [0, 10, 20 and 40 mmol kg^-1] is possible through dendritic crystal growth above the soil surface. Application of crystallization inhibitors increased the concentration of salts on the outer surface and thereby increased pH_e at the top of the soil. Whereas the pH_e of 0-5 cm layers were obtained as 7.30, 7.36 and 7.84, it increased to 9.94, 9.84 and 8.45 in 15-20 cm layers with 10, 20 and 40 mmol kg^-1 AH application doses, respectively. Except for 5-10 cm of control and 10 mmol kg^-1 AP application, the lowest pH_e values were obtained from the 0-5 cm and gradually increased from bottom to top. For all AH and AP application doses, the highest electrical conductivity (EC_e) values were obtained from the 15-20 cm and significantly increased from bottom to top. Application of AH and AP have transformed exchangeable Na⁺ to water-soluble Na⁺ and this situation has caused an increase in the concentration of water-soluble Na⁺ throughout the soil column. AH and AP applications have decreased exchangeable sodium percentage (ESP) in all of the layers. Whereas the ESP of control was 70.07% in 0-5 cm layer, it decreased to 62.44, 55.63 and 53.76% with 10, 20 and 40 mmol kg^-1 AH application doses, respectively. Similar decreases were obtained for 5-10, 10-15 and 15-20 cm layers. Results obtained have shown that application of AH and AP to saline-sodic soil is an effective reclamation material to remove salts from soil surface within a short time, particularly in arid climates.

Selective and effective adsorption of cesium ions by metal hexacyanoferrates (MHCF, M = Cu, Co, Ni) modified chitosan fibrous biosorbent

Selective and effective adsorptive removal of radiocesium is of great importance in terms of nuclear waste management and environmental remediation, but is still challenging because of its radioactive and non-complexing nature. Herein, metal hexacyanoferrates (MHCF, M = Cu, Co, or Ni) modified fibrous chitosan was prepared by multiple sequential adsorption and self-assembly approach, and applied for the selective and effective adsorption of Cs⁺. The physically supported MHCF in chitosan fibers showed good crystallinity and stability, and the obtained fibrous composite has high specific surface area (18.2-29.4 m² g^-1). Moreover, MHCF crystals endowed the fibrous chitosan-based adsorbent with a high adsorption capacity and selectivity towards Cs⁺. Its adsorption kinetic and isotherm performance followed the pseudo second-order model and the Sips model. The q_m value of three fibrous MHCF/chitosan (M = Cu, Co, or Ni) composites was 24.9-70.3 mg g^-1. The fibrous CuHCF/chitosan composite had the highest q_m among the three composites. In summary, the modified chitosan can selectively and effectively remove Cs⁺ from complicated aqueous solutions.

Cesium ion adsorption and desorption on electrospun mesoporous silica nanofibers immobilized with Prussian blue

To fabricate an efficient Cs ion adsorbent and prevent unexpected loss of Prussian blue (PB) colloidal particles during use, PB was immobilized on the surface of electrospun mesoporous silica nanofibers (MSFs) via a newly developed method of double exposure to Fe (III) ions. To introduce PB on MSFs, the MSFs were functionalized with ethylenediamine moiety to bind to Fe (III) ions, which would firmly anchor PB. MSFs were pretreated with Fe (III) ions and exposed to K₄ [Fe(II) (CN)₆] to form PB. We found that this process did not provide a sufficient PB amount on the MSFs. To increase the PB amount, after initial PB formation, the MSFs were treated with Fe (III) ions again so that the unreacted K₄ [Fe(II) (CN)₆] remaining on the MSFs could become PB. An investigation of the adsorption isotherms and kinetics of the nanofibrous adsorbent indicated that monolayer chemisorption had occurred. The maximum Cs ion adsorption capacity using the method of double exposure to Fe (III) ions was determined to be 14.66 mg/g, which was higher by a factor of 2.24 than the case that was not prepared by this method. Cs ions were selectively adsorbed over other cations and could be removed in both acidic and basic conditions, presumably because of the robust MSFs.

Shape stable poly(vinyl alcohol) hydrogels with immobilized metal hexacyanoferrates for cesium removal from waters

The metal hexacyanoferrates with transition metal ions to replace ferric ions in the face center cubic structure of Prussian blue (PB) crystals are candidate adsorbents for radioactive cesium ions in waters. This study for the first time synthesized the shape stable poly(vinyl alcohol) (PVA) hydrogels with immobilized metal hexacynoferrate (PB analogue) that can be stored at dry and can efficiently adsorb cesium ions from waters after rewetting. A total of eight PB analogue particles in two families M₃[Fe(III)(CN)₆]₂ (MFe(III)) or M₄[Fe(II)(CN)₆]₂ (MFe(II)) with M=Zn, Ni, Cu, or Co were synthesized and were immobilized in the PVA hydrogels following boric acid and sulfate crosslinking. The produced PVA-PB analogue hydrogels are all stable in shape after dry and rewet, and the rewet hydrogels can adsorb cesium ions from waters at much higher rates. As predicted by the diffusion-reaction model, the apparent reaction constants for cesium ion adsorption are 4.2×10^-4 1/s, 3.4×10^-4 1/s, 3.9×10^-4 1/s, 4.1×10^-4 1/s, 4.1×10^-4 1/s, 3.8×10^-4 1/s, 1.1×10^-3 1/s, and 9.6×10^-4 1/s, for ZnFe(III), ZnFe(II), NiFe(III), NiFe(II), CuFe(III), CuFe(II), CoFe(III), and CoFe(II), respectively. The corresponding maximum adsorption capacities based on Langmuir isotherm model at 25 °C are 232.6 mg/g, 389.0 mg/g, 193.9 mg/g, 256.8 mg/g, 388.2 mg/g, 395.1 mg/g, 297.3 mg/g, and 391.2 mg/g, respectively. The use of PVA-CoFe(III) is the candidate for enhanced Cs removal from waters comparing the use of other PB analogues as adsorbent.

Minimization of radioactive waste volume from nuclear power plants using precipitation-membrane technologies

The purpose of this study is the development and experimental testing on simulation solutions of a precipitation-membrane method for fractionation of liquid radioactive waste and sorption post-treatment of the filtrate. The choice of processing method is based on the analysis of factors affecting the efficiency of ion-exchange purification of solutions; properties of complex compounds of polyvalent metals; characteristics of commercially available membrane elements and economic aspects of the preparation and disposal of radioactive waste. The basic idea is to use the internal properties of solutions to isolate polyvalent cations and acidoligands in the form of poorly soluble compounds in the volume of an inert polypropylene element, which will increase the efficiency of ion-exchange post-treatment and reduce the amount of waste. The architecture and operating parameters of the experimental setup are designed to provide favorable conditions for the formation in solution of complexes (ion pairs) of polycharged cations with acid ligands of various nature.

Sorption methods in marine radiochemistry

The review presents the general methodology of using sorption methods to solve problems of marine radiochemistry, including sampling, preconcentration and radiochemical preparation and methods for measuring the activity of radionuclides. The possible methodological errors at various stages of sampling and sample concentration are discussed. The most widely used artificial (90Sr, 134Cs, 137Cs, 239Pu, 240Pu), natural (210Pb, 210Po; radium quartet: 223Ra, 224Ra, 226Ra, 228Ra; thorium isotopes, mainly 234Th) and cosmogenic (7Be, 32P, 33P) radiotracers are considered. The sorption of uranium from seawater is not addressed, since its concentration in seawater is usually calculated from the known dependence of uranium concentration on seawater salinity.

The bibliography includes 200 references.

Composite Zn(II) Ferrocyanide/Polyethylenimine Cryogels for Point-of-Use Selective Removal of Cs-137 Radionuclides

The feasibility of several approaches to the fabrication of monolith composite cryogels containing transition-metal ferrocyanides for Cs⁺ ion uptake has been evaluated. Although in the series of investigated metal ion precursors (Cu(II), Zn(II), Ni(II), and Co(II)), in situ formation of the sorption active phase in polyethyleneimine (PEI) cryogel was feasible only in the case of Zn(II) ferrocyanide, this approach has shown significant advantages over the immobilization of ex situ synthesized ferrocyanide nanoparticles. Nanoparticles of the mixed ferrocyanide Zn_1.85K_0.33[Fe(CN)₆] formed in situ had an average size of 516 ± 146 nm and were homogeneously distributed in the monolith located at the polymer surface rather than embedded in the matrix. The Young modulus of the PEI cryogel increased after modification from 25 to 57 kPa, but composites maintained high permeability to the flow. Sorption of Cs⁺ ions has been investigated at superficial velocity up to 8 m/h. Steep breakthrough profiles and uptake efficiency of >99.5% until breakthrough point confirmed that a supermacroporous structure of the monolith composite assured good mass transfer, so that intraparticle diffusion was not the limiting stage of sorption kinetics. Application of the rate-constant distribution model (RCD model) to analyze the breakthrough curves of Cs⁺ sorption allowed the identification of two types of sorption sites with a difference in sorption rate constants of ~1 log unit. Most likely, sorption on “fast” sorption sites was governed by ion exchange between Cs⁺ ions in solution and K⁺ ions in the ferrocyanide lattice. Cs-137 radionuclide removal was investigated using the monolith composite columns of various geometries at superficial velocity up to the 6.6 m/h; specific gamma activity was reduced from 265 kBq/L to the background level, showing high potential of these materials for POU application.

Effective removal of radioactive cesium from contaminated water by synthesized composite adsorbent and its thermal treatment for enhanced storage stability

A composite adsorbent for the removal of radioactive cesium (¹³⁷Cs) was synthesized by immobilizing potassium cobalt ferrocyanide in the micro pores of the zeolite chabazite. The synthetically optimized composite adsorbent demonstrates a rapid cesium adsorption rate under both salt-free and high-salt conditions with a high distribution coefficient of cesium (≥10⁵ mL/g). Although both components have the same ion-exchange reaction between potassium and cesium, the reaction by ferrocyanide component was predominant, which derived hundred times higher distribution coefficient of the composite adsorbent than that of pure chabazite. A thermal stabilization process was studied for improving the storage and/or disposal stability of the spent adsorbent. The formation of a eutectic system within the spent adsorbent reduced the stabilization temperature to 1000 °C from 1200 °C. Accordingly, the leaching of cesium was remarkably reduced by the remineralization to the stable pollucite. The stable impregnation of ferrocyanide component in the chabazite pores derived the reduction of cesium volatility enabling the high temperature stabilization method. Our experimental results provide evidence that the composite adsorbent has clear advantages on the cesium removal from contaminated water and its stabilization via thermal-treatment.

Caesium adsorption on a zeolitic imidazolate framework (ZIF-8) functionalized by ferrocyanide

¹³⁷Cs is one of the most hazardous radionuclides in nuclear waste owing to its toxicity. Developing an adsorbent for Cs⁺ with a high capacity and selectivity is a challenging task. A metal-organic framework (MOF) is a material with a high surface area that has been widely applied in wastewater treatment. Exploiting the affinity between ferrocyanide (FC) and Cs⁺, zeolitic imidazolate framework-8 (ZIF-8) was chemically functionalized with FC, ZIF-8-FC to selectively capture Cs⁺. After functionalization, ZIF-8-FC has a hollow morphology and small FC related crystals, which might result in better migration of Cs⁺ inside ZIF-8-FC. This synergistic effect was proven by the Q_max of ZIF-8-FC, 422.42 mg g^-1, which is 15.9 times higher than that of ZIF-8. Additionally, ZIF-8-FC retained its good adsorption performance within a pH range of 3-11 and an excellent Cs⁺ selectivity even in artificial seawater conditions. The structure of ZIF-8-FC after adsorption proves its stability. Furthermore, the thermodynamic adsorption implied that higher temperatures are more favorable for Cs⁺ uptake. This work demonstrates the remarkable adsorption and selectivity of ZIF-8-FC, which make it a promising candidate for remediation of radioactive Cs⁺.

Distinct ionic adsorption sites in defective Prussian blue: a 3D-RISM study

Ferric hexacyanoferrate (FeHCF) or Prussian blue (PB) exhibits selective alkali ion adsorption and has great potential for use in various applications. In the present work, alkali ion (Li⁺, Na⁺, K⁺, and Cs⁺) and water configurations in defective PB (d-PB) were studied by using the statistical mechanics of molecular liquids. The three-dimensional (3D) distribution functions of the ions and water were determined by solving the 3D-reference interaction site model (RISM) equation of systems of a unit lattice of d-PB in electrolyte solutions, i.e., LiCl, NaCl, KCl, and CsCl. The results show the difference in the ion-water configurations and distributions between small (Li⁺ and Na⁺) and large ions (K⁺ and Cs⁺). The adsorption sites of Li⁺ and Na⁺ are located off-center and lie on the diagonal axis. By contrast, the larger ions, K⁺ and Cs⁺, are adsorbed at the center of the unit cell. The degree of dehydration due to the adsorption of alkali ions indicates that there was no water exchange during Li⁺ and Na⁺ adsorption, whereas two and three water molecules were removed after adsorption of K⁺ or Cs⁺ in the unit cell.

Surface modification of poly(vinyl alcohol) sponge by acrylic acid to immobilize Prussian blue for selective adsorption of aqueous cesium

Prussian blue (PB) is known to be an effective cesium adsorbent, but the direct application of PB is limited by the difficulty of its recovery from solution. In this study, PB was immobilized on a porous support media, poly(vinyl alcohol) (PVA) sponge, for use as a selective material for cesium adsorption. The commercially available PVA sponge was functionalized by the addition of poly(acrylic acid) (PAA) (i.e., PAA-PVA) to enhance the PB immobilization, which increased both PB loading and binding strength. The AA functionalization changed the major functional groups from hydroxyl to carboxylic, as confirmed by Fourier-transform infrared spectroscopy. PB was further synthesized in the PAA-PVA using layer-by-layer (LBL) assembly, which contributed to more stable PB formation, and reduced detachment of PB during washing. The prepared adsorbent, PAA-L@PVA-PB, was tested for cesium adsorption capability. Cesium adsorption was equilibrated within three hours, and the maximum cesium adsorption capacity was 4.082 mg/g, which was 5.7 times higher than Pure-L@PVA-PB. The observed decrease in solution pH during cesium adsorption inhibited overall cesium uptake, however, this was minimized by buffering. The prepared PAA-L@PVA-PB was used as a column filling material and its potential use as a countermeasure for removing radioactive cesium from a contaminated water stream was demonstrated.

Activated Carbon/Transition Metal (Ni, In, Cu) Hexacyanoferrate Nanocomposites for Cesium Adsorption

Transition metal hexacyanoferrate/microporous activated carbon composites were obtained using a simple successive impregnation approach. The effect of metal type (nickel, indium, or copper), and the carbon oxidation on the composite characteristics (porosity, metal structure, and particle size), as well as on the removal efficiency of cesium from aqueous solution was investigated. Successful formation of the desired metal hexacyanoferrate phase was achieved and the size of the metallic nanoparticles and their dispersion in the carbon network was found to depend on the metal type, with the indium and nickel-based materials exhibiting the smallest particle size distribution (< 10 nm). Adsorption tests performed under batch conditions demonstrate that the copper hexacyanoferrate/activated carbon composite present the highest cesium removal capacity from aqueous solution (74.7 mg·g⁻¹) among the three studied metal-based nanocomposites. The carbon oxidation treatment leads to the increase in the number of functional groups to the detriment of the porosity but allows for an improvement in the Cs adsorption capacity. This indicates that the Cs adsorption process is governed by the carbon surface chemistry and not its porosity. Moreover, combining oxidized carbon support with copper hexacyanoferrate induces the highest cesium adsorption capacity (101.5 mg·g⁻¹). This could be related to synergistic effects through two absorption mechanisms, i.e., a cation exchange mechanism of Cs with the metallic hexacyanoferrate phase and Cs adsorption via carbon oxygen surface groups, as demonstrated using X-ray photoelectron spectroscopy (XPS) analyses.

Titanium Silicates Precipitated on the Rice Husk Biochar as Adsorbents for the Extraction of Cesium and Strontium Radioisotope Ions

The aim of the work was the development of cheap and effective adsorbents based on titanium silicates deposited on the products of thermochemical processing of rice husk to extract cesium and strontium radioisotopes from aqueous media. Synthesis of adsorbents was carried out using the cheapest and widely used titanium water-soluble reagent, titanium sulfate (an intermediate product of white rutile pigment production), as feedstock. After treatment with titanium sulfate and neutralization, hydrothermal treatment was carried out in various ways. The traditional method of processing in an autoclave was used, as well as the blowing at different temperatures by steam. The distribution coefficients and the adsorption capacity for cesium and strontium ions on these sorbents were studied. Along with the chemical composition of adsorbents obtained by those ways, the type and the temperature of hydrothermal treatment also affected the adsorption properties. It was found that the adsorbent obtained by hydrothermal treatment in an autoclave has the highest degree of cesium ions extraction (Kd = 27,500). The highest degree of strontium ions extraction (Kd = 2,095,000) has an adsorbent obtained by hydrothermal treatment with water vapor blowing.

Preparation, characterization and application in cobalt ion adsorption using nanoparticle films of hybrid copper-nickel hexacyanoferrate

Different mole ratios (n Cu : n Ni = x : y) of hybrid copper-nickel metal hexacyanoferrates (Cu x Ni y HCFs) were prepared to explore their morphologies, structure, electrochemical properties and the feasibility of electrochemical adsorption of cobalt ions. Cyclic voltammetry (CV), field emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) indicated that the x : y ratio of Cu x Ni y HCF nanoparticles can be easily controlled as designed using a wet chemical coprecipitation method. The crystallite size and formal potential of Cu x Ni y HCF films showed an insignificant change when 0 ≤ x : y < 0.3. Given the shape of the CV curves, this might be due to Cu2+ ions being inserted into the NiHCF framework as countercations to maintain the electrical neutrality of the structure. On the other hand, crystallite size depended linearly on the x : y ratio when x : y > 0.3. This is because Cu tended to replace Ni sites in the lattice structure at higher molar ratios of x : y. Cu x Ni y HCF films inherited good electrochemical reversibility from the CuHCFs, in view of the cyclic voltammograms; in particular, Cu1Ni2HCF exhibited long-term cycling stability and high surface coverage. The adsorption of Co2+ fitted the Langmuir isotherm model well, and the kinetic data can be well described by a pseudo-second order model, which may imply that Co2+ adsorption is controlled by chemical adsorption. The diffusion process was dominated by both intraparticle diffusion and surface diffusion.

Amino-functionalized magnetic chitosan beads to enhance immobilization of potassium copper hexacyanoferrate for selective Cs+ removal and facile recovery

Potassium copper hexacyanoferrate (KCuHCF)-incorporated magnetic chitosan beads (HMC) were synthesized for both selective Cs⁺ removal in aqueous solutions and facile recovery of the spent adsorbent. To disperse and immobilize large amounts of the KCuHCF, methyl acrylate and diethylenetriamine were sequentially grafted onto the one-step synthesized magnetic chitosan beads. The additional introduction of amino functionality led to the enriched Cu²⁺ ions on the bead surface to incorporate KCuHCF into the grafting matrix. Consequently, the HMC exhibited a high Cs⁺ capacity calculated to be 136.47 mg g⁻¹ from the Langmuir model, and the equilibrium was established within 4 h. Moreover, the HMC exhibited excellent stability in a wide pH range from 4 to 11 and an outstanding Cs⁺ selectivity (>97%) in seawater (1.11 mg L⁻¹ Cs⁺). From a practical point of view, the HMC was stable during five successive adsorption cycles and easily recovered by magnets, enabling continuous operation to decontaminate a large volume of wastewater.

The magnetic chitosan beads were amino-functionalized by grafting and showed an outstanding removal performance for radioactive Cs⁺.