Multicomponent Synthesis and Evaluation of New 1,2,3-Triazole Derivatives of Dihydropyrimidinones as Acidic Corrosion Inhibitors for Steel

Plant mediated synthesis of flower-like Cu2O microbeads from Artimisia campestris L. extract for the catalyzed synthesis of 1,4-disubstituted 1,2,3-triazole derivatives

This study presents a novel method for synthesizing 1,4-disubstituted 1,2,3-triazole derivatives through a one-pot, multi-component addition reaction using flower-like Cu2O microbeads as a catalyst. The flower-like Cu2O microbeads were synthesized using an aqueous extract of Artimisia Campestris L. This extract demonstrated the capability to reduce and stabilize Cu2O particles during their initial formation, resulting in the formation of a porous flower-like morphology. These Cu2O microbeads exhibit distinctive features, including a cubic close-packed (ccp) crystal structure with an average crystallite size of 22.8 nm, bandgap energy of 2.7 eV and a particle size of 6 µm. Their catalytic activity in synthesizing 1,4-disubstituted 1,2,3-triazole derivatives was investigated through systematic exploration of key parameters such as catalyst quantity (1, 5, 10, 15, 20, and 30 mg/mL), solvent type (dimethylformamide/H2O, ethanol/H2O, dichloromethane/H2O, chloroform, acetone, and dimethyl sulfoxide), and catalyst reusability (four cycles). The Cu2O microbeads significantly increased the product yield from 20% to 85.3%. The green synthesis and outstanding catalytic attributes make these flower-like Cu2O microbeads promising, efficient, and recyclable catalysts for sustainable and effective chemical transformations.

Biginelli Reaction Synthesis of Novel Multitarget-Directed Ligands with Ca2+ Channel Blocking Ability, Cholinesterase Inhibition, Antioxidant Capacity, and Nrf2 Activation

Novel multitarget-directed ligands BIGI 4a-d and BIGI 5a-d were designed and synthesized with a simple and cost-efficient procedure via a one-pot three-component Biginelli reaction targeting acetyl-/butyrylcholinesterases inhibition, calcium channel antagonism, and antioxidant ability. Among these multitarget-directed ligands, BIGI 4b, BIGI 4d, and BIGI 5b were identified as promising new hit compounds showing in vitro balanced activities toward the recognized AD targets. In addition, these compounds showed suitable physicochemical properties and a good druglikeness score predicted by Data Warrior software.

Fluorescence turn-on probes for intracellular DNA/RNA distribution based on asymmetric bis(styryl) dyes

Two bis(styryl) dyes, varying in type of spacer between two mono(styryl) units, were tested for interactions with ct-DNA or cl-RNA. Both compounds showed strong affinity toward ds-DNA/ss-RNA, the binding mode of the interaction is shifting between DNA groove binding to RNA intercalation. Consequently, interaction with DNA shows a stronger flare-up of fluorescence (151 times for dye 1 and 118 times for dye 2) than when binding with RNA (23 times and 36 times correspondingly). The presence of energy transfer in the bis(styryl) system increases the Stokes shift of the dye, so when irradiating the system in the region of 370-380 nm, fluorescence is detected at 610-620 nm. The biological experiments showed that the efficient intracellular fluorescence quench was observed in the DNase digest test suggested that dyes can be applied by recognition of DNA in the presence of RNA molecules.

Flavone-1,2,3-triazole derivatives as potential α-glucosidase inhibitors: Synthesis, enzyme inhibition, kinetic analysis and molecular docking study

α-Glucosidase inhibitors are considered prime therapeutics in the management of type-2 diabetes and are preferred due to their localized action ushered by limited side effects. In this regard, nineteen new flavone-1,2,3-triazole derivatives have been designed and synthesized via utilizing an efficient click reaction protocol, and screened for the inhibition of the α-glucosidase enzyme. The reaction conditions were mild, good yielding and required easy work up. All the synthesized flavone-triazole derivatives were found more active against the yeast α-glucosidase with IC₅₀ values ranging from 24.37 ± 0.55-168.44 ± 0.77 μ M as compared to standard inhibitor acarbose (IC₅₀ = 844.81 ± 0.53 μM). The derivatives with 2,5‑dichloro 9k (IC₅₀ = 24.37 ± 0.55 μM) and 4‑chloro 9d (IC₅₀ = 24.77 ± 0.30 μM) substituent bearing an amide linkage were the most active. In the kinetic study of most active derivatives 9k and 9d, they were found to be mixed and uncompetitive inhibitors, respectively. In molecular docking studies, blind docking of the most active compounds was accomplished to find the interactions between the compounds and α-glucosidase that further confirms the mixed or uncompetitive nature of the inhibitors.

Synthesis and Antiproliferative Activity of Novel Quercetin-1,2,3-Triazole Hybrids using the 1,3-Dipolar Cycloaddition (Click) Reaction

Twenty-three new quercetin-1,2,3-triazole hybrids were synthesized in good to quantitative yields via Cu(I)-catalyzed azide-alkyne cycloaddition reaction under microwave irradiation. These new hybrids contain a 1,4-disubstituted 1,2,3-triazole ring at the 3-OH position of quercetin whilst the remaining hydroxyl groups were either protected as methyl or benzyl groups or left unprotected. All the quercetin-1,2,3-triazole hybrids I–IV were evaluated against REM-134 canine mammary cancer cell line, which is used as a translational model for human breast cancer. These new analogues exhibit potent antiproliferative activity against this cancer cell line. Furthermore, the results show that some of the new quercetin-1,2,3-triazole hybrids have better activity than quercetin. Our best inhibitors displayed IC50 values in the range of 41–180 nM, and undoubtedly will have an important impact on the treatment of both canine and human breast cancer.

An Overview on the Performance of 1,2,3-Triazole Derivatives as Corrosion Inhibitors for Metal Surfaces

This review accounts for the most recent and significant research results from the literature on the design and synthesis of 1,2,3-triazole compounds and their usefulness as molecular well-defined corrosion inhibitors for steels, copper, iron, aluminum, and their alloys in several aggressive media. Of particular interest are the 1,4-disubstituted 1,2,3-triazole derivatives prepared in a regioselective manner under copper-catalyzed azide-alkyne cycloaddition (CuAAC) click reactions. They are easily and straightforwardly prepared compounds, non-toxic, environmentally friendly, and stable products to the hydrolysis under acidic conditions. Moreover, they have shown a good efficiency as corrosion inhibitors for metals and their alloys in different acidic media. The inhibition efficiencies (IEs) are evaluated from electrochemical impedance spectroscopy (EIS) parameters with different concentrations and environmental conditions. Mechanistic aspects of the 1,2,3-triazoles mediated corrosion inhibition in metals and metal alloy materials are also overviewed.

Mechanistic understanding of the Cu(i)-catalyzed domino reaction constructing 1-aryl-1,2,3-triazole from electron-rich aryl bromide, alkyne, and sodium azide: a DFT study

The mechanism of the Cu(i)-catalyzed domino reaction furnishing 1-aryl-1,2,3-triazole assisted by CuI and 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) is explored with density functional theory (DFT) calculations.

Dihydropyrimidinones Scaffold as a Promising Nucleus for Synthetic Profile and Various Therapeutic Targets: A Review

BACKGROUND

This review elaborates the updated synthetic and pharmacological approaches of a known group of dihydropyrimidinones/thiones from the multi-component reaction like Biginelli reaction, which was named Pietro Biginelli in 1891. This review consists of the reaction of an aromatic aldehyde, urea and ethyl acetoacetate leading to dihydropyrimidinone/thione. Currently, the scientific movement to develop economically viable green methods using compounds that are reusable, non-volatile, easily obtained, etc. Objective: This review covers the recent synthesis and pharmacological advancement of dihydropyrimidinones/ thiones moiety, along with covering the structure-activity relationship of the most potent compounds, which may prove to become better, more efficacious and safer agents. Thus, this review may help the researchers in drug designing and development of new Dihydropyrimidinones entities.

CONCLUSION

This review focuses on the wide application of dihydropyrimidinone/thione review reports the design, synthesis and pharmacological activities of nitrogen-sulphur containing dihydropyrimidinone moiety by using multi-component reaction. Dihydropyrimidinones (DHPM) pharmacophore is an important heterocyclic ring in medicinal chemistry. It is derived from multi-component reactions, "Biginelli reaction" and plays a critical role as anticancer, antioxidant, antimicrobial, anti-inflammatory, anti-HIV-1, antimalarial, anti-inflammatory, antihypertensive and anti-tubercular agents. Exhaustive research has led to its vast biological profile, with a wide range of therapeutic application.

Cu-Al mixed oxide-catalysed multi-component synthesis of gluco- and allofuranose-linked 1,2,3-triazole derivatives

A series of carbohydrate-linked 1,2,3-triazole derivatives were synthesized in good yields from glucofuranose and allofuranose diacetonides using as key step a three-component 1,3-dipolar azide-alkyne cycloaddition catalysed by a Cu-Al mixed oxide. In this multi-component reaction, Cu-Al mixed oxide/sodium ascorbate system serves as a highly reactive, recyclable and efficient heterogeneous catalyst for the regioselective synthesis of 1,4-disubstituted 1,2,3-triazoles. The reported protocol has significant advantages over classical CuI/N,N-diisopropylethylamine (DIPEA) or CuSO4/sodium ascorbate conditions in terms of efficiency and reduced synthetic complexity. In addition, the selective deprotection of synthesized di-O-isopropylidene derivatives was also carried out leading to the corresponding mono-O-isopropylidene products in moderate yields. Some of the synthesized triazole glycoconjugates were tested for their in vitro antimicrobial activity using the disc diffusion method against Gram-positive bacteria (Staphylococcus aureus and Bacillus subtilis), Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa), as well as fungus (Aspergillus niger) and yeast (Candida utilis). The results revealed that these compounds exhibit moderate to good antimicrobial activity mainly against Gram-negative bacteria.

Expeditious Synthesis of 2-Amino-4H-chromenes and 2-Amino-4H-pyran-3- carboxylates Promoted by Sodium Malonate

BACKGROUND

Chromenes and pyran annulated heterocycles are the most common frameworks existing in various biologically active molecules. Due to their beneficial and biological properties, they are eyecatching synthetic targets in the arsenal of organic chemistry. Thus, finding green and efficient methods, as well as searching for a new catalyst for the synthesis of these heterocycles is of interest to organic chemistry researchers.

OBJECTIVE

Sodium malonate as a readily available catalyst was employed aimed at the multicomponent synthesis of numerous 2-amino-4H-chromenes and 2-amino-4H-pyrans in water as a green medium reaction.

METHODS

The reaction was performed via treatment of aldehydes (1 mmol) with malononitrile/ethyl cyanoacetate (1 mmol) and β-dicarbonyl compounds (1 mmol)/or resorcinol (1 mmol) in water (4 mL) in the presence of sodium malonate (10 mol %) at 70°C. On completion of the reaction (monitored by TLC analysis), the reaction mixture was gradually cooled at room temperature, and the resulting precipitates were collected by filtration, washed with cold ethanol and air-dried to give the corresponding pure products. The solvent was evaporated from the filtrate to recover the catalyst, and the catalyst was reused for subsequent reactions.

RESULTS

In the initial stages, we explored the best reaction conditions using three-component reaction of benzaldehyde, malononitrile, and dimedone as the model reaction. The effects of catalyst loading, temperature, and solvents were explored for this reaction. It was found that the best results were obtained for the synthesis of 2-amino-4H-chromenes and 2-amino-4H-pyran when the three-component reaction was carried out with equivalent molar quantities of each of the reactants in water containing 10 mol% sodium malonate at 70°C for 15 min in 96% yield. After finding optimal conditions, these conditions apply to other reactants and the target heterocyclic products were obtained with excellent yields.

CONCLUSION

This study describes an efficient, environmentally benign, and clean one-pot, three-component synthesis of 2-amino-4H-chromenes and 2-amino-4H-pyran-3-carboxylates in the presence of sodium malonate as the commercially available catalyst in an aqueous medium at 70°C. High yields, mild reaction conditions, relatively shorter reaction times, use of simple reagents, and no requirement of the ultrasound, microwave, and ball milling techniques are the salient features and benefits of the present method. In addition, the present process is smooth and green.

Ethyl 6-Methyl-2-oxo-4-{4-[(1-phenyl-1H-1,2,3-triazol-4-yl)methoxy]phenyl}-1,2,3,4-tetrahydropyrimidine-5-carboxylate

The Biginelli reaction is an acid-catalyzed, three-component reaction between an aldehyde, a hydrogen methylene active compound, and urea (or its analogue) and constitutes a rapid and easy synthesis of highly functionalized heterocycles. Synthesis of ethyl 6-methyl-2-oxo-4-{4-[(1-phenyl-1H-1,2,3-triazol-4-yl)methoxy]phenyl}-1,2,3,4-tetrahydropyrimidine-5-carboxylate, identified by our laboratory code LaSOM® 293, was achieved using the Biginelli reaction as the key step, followed by the Huisgen 1,3-dipolar cycloaddition in a convergent four-step route. The product LaSOM® 293 was obtained with a yield of 84%.

Adsorption and corrosion inhibition behaviour of new theophylline-triazole-based derivatives for steel in acidic medium

The design and synthesis of a series of theophylline derivatives containing 1,2,3-triazole moieties are presented. The corrosion inhibition activities of these new triazole-theophylline compounds were evaluated by studying the corrosion of API 5 L X52 steel in 1 M HCl medium. The results showed that an increase in the concentration of the theophylline-triazole derivatives also increases the charge transference resistance (R ct) value, enhancing inhibition efficiency and decreasing the corrosion process. The electrochemical impedance spectroscopy under static conditions studies revealed that the best inhibition efficiencies (approx. 90%) at 50 ppm are presented by the all-substituted compounds. According to the Langmuir isotherm, the compounds 4 and 5 analysed exhibit physisorption-chemisorption process, with exception of the hydrogen 3, bromo 6 and iodo 7 substituted compounds, which exhibit chemisorption process. The corrosion when submerging a steel bar in 1 M HCl was studied using SEM-EDS. This experiment showed that the corrosion process decreases considerably in the presence of 50 ppm of the organic inhibitors. Finally, the theoretical study showed a correlation between EHOMO, hardness (η), electrophilicity (W), atomic charge and the inhibition efficiency in which the iodo 7 substituted compound presents the best inhibitor behaviour.

Synthesis of polyheterocycles via multicomponent reactions

Polyheterocycles are one of the most desired synthetic targets due to their numerous and valuable applications in various fields. Multicomponent reactions (MCRs) are highly convergent one-pot processes, in which three or more reagents are combined sequentially to construct complex products, with almost all the atoms coming from the starting reagents. In this context, the syntheses of 'heterocycles' via MCR-based processes have been reviewed a number of times. However, there is not a single review (recent or otherwise) covering the synthesis of 'polyheterocycles' via a direct MCR or via a one-pot process involving MCRs coupled to further cyclizations (via ionic, metal-catalyzed, pericyclic, or free-radical-mediated cyclizations). This issue is consequently the main topic of the present review, which considers work from the last decade. The work is categorized according to the key processes involved in the syntheses of polyheterocycles, aiming to give readers an easy understanding of this MCR-based chemistry and to provide insights for further investigations. The reaction mechanisms providing novel elements to these MCR-based methods for the synthesis of polyheterocycles are also discussed.

Synthesis of new mixed-bistriarylmethanes and novel 3,4-dihydropyrimidin-2(1H)one derivatives

Formylated-triarylmethanes were realized as ideal precursors for the design and synthesis of mixed-bistriarylmethanes and 3,4-dihydropyrimidin-2(1H)one-triarylmethane hybrid derivatives.

Synthesis of novel perillyl-dihydropyrimidinone hybrids designed for antiproliferative activity

A series of fifteen novel dihydropyrimidinone hybrid compounds were synthesized in good yields via a multicomponent reaction combined with the Huisgen reaction. The antiproliferative activity was investigated against nine tumor cell lines, and four hybrid compounds (TGI < 10 μM) showed promising antiproliferative activity against the tumor cell lines OVCAR-3 (ovarian), UACC-62 (melanoma) and U251 (glioma). Several hybrid compounds assayed have high TGI values (TGI 147.92-507.82) for the human keratinocyte cell line (HaCat), which reveals selectivity to cancer cells.

Synthesis and Liquid Crystalline Properties of a New Homologous Series of 4,5-Disubstituted 2H-[1,2,3]-Triazoles via Azide-Chalcone Oxidative Cycloaddition Reaction

A new homologous series of 4,5-disubstituted 2H-[1,2,3]-triazole derivatives were synthesized from chalcones and sodium azide via oxidative cycloaddition reaction; CuI was used as catalyst. Flexibility in the synthesized molecules was provided by attaching straight alkoxy chains. The synthesized compounds were characterized by elemental analysis, and 1H NMR and 13C NMR and LC-MS spectroscopies . The stability and range of the mesophases increased with the length of the chain on the triazoles. The melting point, transition temperatures, and enantiotropic liquid crystal morphologies were determined by differential scanning calorimetry (DSC) and polarizing optical microscopy (POM) equipped with a hot stage.

Hydrazino-methoxy-1,3,5-triazine Derivatives' Excellent Corrosion Organic Inhibitors of Steel in Acidic Chloride Solution

The corrosion inhibition performance of 2-hydrazino-4,6-dimethoxy-1,3,5-tirazine (DMeHT), 2,4-dihydrazino-6-methoxy-1,3,5-triaizine (DHMeT), and 2,4,6-tridydrazino-1,3,5-triaizne (TH₃) on steel corrosion in acidic media was examined using electrochemical techniques. The results showed 2,4-Ddihydrazino-6-methoxy-1,3,5-triaizine (DHMeT) gave the best corrosion protection performance among the other hydrazino derivatives even at a low concentration of 25 ppm (95%). The number of hydrazino groups play an important role in the corrosion inhibition, where the two hydrazine groups increased the electrostatic interactions between the protonated tested compounds, the negatively charged steel surface resulted from the adsorption of the chloride anions, and the presence of the methoxy group made the compound more reliable for formation of film protection on the surface of steel through the lone pair of oxygen atoms. Electrochemical Impedance Spectroscopy (EIS) measurements suggested that the corrosion process of steel in presence of the hydrazino-s-triazine derivatives (TH₃, DMeHT and DHMeT) were being controlled by the charge transfer reaction. Polarization curves indicated that the examined TH₃, DMeHT and DHMeT behaved as mixed type inhibitors.

Electrochemical assessment of phenol and triazoles derived from phenol (BPT) on API 5L X52 steel immersed in 1 M HCl

The phenol-derived triazoles beginning at 10 ppm show excellent inhibition against corrosion when immersed in 1 M HCl.