Spotlight on Biomimetic Systems Based on Lyotropic Liquid Crystal

Heterogeneous micellar solubilization within lyotropic liquid crystals interfaces

The solubilization of sodium diclofenac (Na-DFC) in a glycerol monooleate-based emulsion triggers series of structural changes. Incorporation of Na-DFC, leads to formation of a reverse hexagonal mesophase between 2 and 5 wt% Na-DFC. Between 6 and 9 wt% Na-DFC, the hexagonal symmetry gradually transitions to a disordered lamellar mesophase. These structural shifts impact the system's storage modulus, structuring enthalpy, and structural diffusivity. Despite these transitions, the driving force for Na-DFC release remains consistent, leading to hypothesize that the interfacial structure remains unchanged during Na-DFC release. The nano-structural modifications imposed by the Na-DFC load and release were assessed by small-angle X-ray diffraction (SAXD), spin-probe electron paramagnetic resonance (EPR), and nuclear quadrupole resonance (NQR). The selective solubilization of Na-DFC was demonstrated by SAXD peak fittings, revealing an increase of hexagonally oriented rods at the expense of non-oriented micelles, rather than gradual micellar elongation. Computation of the EPR spectra also showcased the selective solubilization of Na-DFC at an enhanced free energy interface (γ), evidenced by step-wise variations in polarity, microviscosity, and order parameters. Additionally, NQR analysis highlighted a higher anisotropy for sodium compared to deuterium, linking the selective solubilization of Na-DFC to heterogeneous structural transformations. These findings underscore the heterogeneous nature of solubilization-release processes, driven by locally increased micellar free energy. Consequently, the loaded Na-DFC interfaces maintain a constant γ, ensuring a consistent release driving force despite the structural transitions affecting the matrix. The ability to selectively solubilize guest molecules may herald a new era in the utilization of selective molecular interfacial loading.

Molecular Orientation Behavior of Lyotropic Liquid Crystal-Carbon Dot Hybrids in Microfluidic Confinement

Lyotropic liquid crystals represent an important class of anisotropic colloid systems. Their integration with optically active nanoparticles can provide us with responsive luminescent media that offer new fundamental and applied solutions for biomedicine. This paper analyzes the molecular-level behavior of such composites represented by tetraethylene glycol monododecyl ether and nanoscale carbon dots in microfluidic channels. Microfluidic confinement allows for simultaneously applying multiple factors, such as flow dynamics, wall effects, and temperature, for the precise control of the molecular arrangement in such composites and their resulting optical properties. The microfluidic behavior of composites was characterized by a set of analytical and modeling tools such as polarized and fluorescent microscopy, dynamic light scattering, and fluorescent spectroscopy, as well as image processing in Matlab. The composites were shown to form tunable anisotropic intermolecular structures in microchannels with several levels of molecular ordering. A predominant lamellar structure of the composites was found to undergo additional ordering with respect to the microchannel axis and walls. Such an alignment was controlled by applying shear and temperature factors to the microfluidic environment. The revealed molecular behavior of the composite may contribute to the synthesis of hybrid organized media capable of polarized luminescence for on-chip diagnostics and biomimetics.

Computational Analysis on the Performance of Elongated Liquid Crystal Biosensors

Elongated ellipsoidal liquid crystal microdroplet reorientation dynamics are discussed in this paper for biosensor applications. To investigate the effect of elongated droplets on nematic liquid crystal droplet biosensors, we simulated a model of a liquid crystal droplet using ellipse geometry. Director reorientation is examined in relation to the elongated droplet shape. In addition, we examined aspect ratio as a factor affecting biosensor response time in relation to surface viscosity and anchoring energy. Finally, the findings suggest that the aspect ratio should be taken into account when designing biosensors. These results can be used to develop more effective biosensors for a variety of applications. This model then predicts the director reorientation angle, which is dependent on the anchoring energy and surface viscosity. This model further suggests that both surface viscosity and homeotropic anchoring energy play an important role when it comes to the director reorientation angle. We developed and applied a nonlinear unsteady-state mathematical model utilizing torque balance and Frank free energy according to the Leslie-Ericksen continuum theory for simulating elongated nematic liquid crystal biosensor droplets with aqueous interfaces. Using the Euler-Lagrange equation, a transient liquid crystal-aqueous interface realignment is modeled by changing the easy axis when surfactant molecules are added to the interface. The realignment at the surface of the droplet is assumed to be driven by the effect of the surfactant, which causes an anchoring transition. According to the results, the response time of the biosensor depends on the aspect ratio. Therefore, the elongation has the potential to control biosensing response time. The result of our study provides a better understanding of director reorientation in elongated liquid crystal droplets in biosensing applications through the numerical results which are presented in this paper.

Utilization of Lyotropic Liquid Crystalline Gels for Chronic Wound Management

Management of chronic wounds is becoming a serious health problem worldwide. To treat chronic wounds, a suitable healing environment and sustained delivery of growth factors must be guaranteed. Different therapies have been applied for the treatment of chronic wounds such as debridement and photodynamic therapy. Among them, growth factors are widely used therapeutic drugs. However, at present, growth factor delivery systems cannot meet the demand of clinical practice; therefore new methods should be developed to meet the emerging need. For this reason, researchers have tried to modify hydrogels through some methods such as chemical synthesis and molecule modifications to enhance their properties. However, there are still a large number of limitations in practical use like byproduct problems, difficulty to industrialize, and instability of growth factor. Moreover, applications of new materials like lyotropic liquid crystalline (LLC) on chronic wounds have emerged as a new trend. The structure of LLC is endowed with many excellent properties including low cost, ordered structure, and excellent loading efficiency. LLC can provide a moist local environment for the wound, and its lattice structure can embed the growth factors in the water channel. Growth factor is released from the high-concentration carrier to the low-concentration release medium, which can be precisely regulated. Therefore, it can provide sustained and stable delivery of growth factors as well as a suitable healing environment for wounds, which is a promising candidate for chronic wound healing and has a broad prospective application. In conclusion, more reliable and applicable drug delivery systems should be designed and tested to improve the therapy and management of chronic wounds.

Prolonged local delivery of doxorubicin to cancer cells using lipid liquid crystalline system

Exploring efficient strategies to eradicate the tumor tissue and enhance patient outcomes still remained a serious challenge. Systemic toxicity of the current chemotherapeutics and their low concentration in the tumor site limited reaching a practical approach in their administration and combinational therapy. Besides, complicated delivery platforms could not receive the marketing approval due to difficulties in scale up procedures. To this aim, we developed a simple injectable local delivery platform which provided a sufficient dose of the chemotherapeutic in the cancerous tissue with sustained release properties. Herein, various injectable in situ forming LLC formulations loaded with doxorubicin (DOX) were developed. Although there were many previous studies on lipid liquid crystal (LLC) based formulations, their performance as an injectable intratumoral depot system for local chemotherapy has not been extensively investigated yet. In the current study we developed 18 formulations of DOX loaded LLCs using Box-Behnken method via different ratios of phosphatidyl choline: sorbitan monooleate (PC: SMO), N-Methyl-2-pyrrolidone (NMP), and tween 80. The physicochemical properties of the formulations were investigated and their in vivo tumor inhibition efficiencies in C26 tumor bearing mouse model was further studied. The results indicated that DOX loaded PC: SMO/NMP/Tween 80 (50:50/50/2 w/w%) and DOX loaded PC: SMO/NMP (50:50/50 w/w%) formulations were syringeable with pseudoplastic behavior. Also, they could release the cargo in a sustained manner for 60 days. Compared to intravascular administration of DOX, intratumoral injection of the developed formulations led to a significant decrease in tumor volume and enhancement of the survival rate in murine tumor model. Additionally, animal imaging studies proved their prolonged accumulation in the tumor site. Histopathological studies showed that treatment with the DOX-loaded LLC formulations did not cause any systemic toxicity to vital organs. Taken together, we believe that the developed simple and efficient local delivery platform can be further used in combinational therapies and treatment of various solid tumors.

Effects of Green Tea and Green Tea Incorporated in Nanoparticle Lyotropic Liquid Crystal on Exercise Adaptations: A High-Intensity Interval Training Pre-Clinical Study

Green tea (GT) is a natural antioxidant, sensitive to oxidation after preparation. Lyotropic liquid crystals (LLCs) are nanostructured systems used to incorporate bioactive compounds. High-intensity interval training (HIIT) is a workout modality that increases the production of reactive oxygen species (ROS). Thus, this research aimed to compare the effects of GT and GT loaded in LLC in animals subjected to HIIT, considering hematological, biochemical and histological parameters, redox status, and body mass. Monoolein, GT in infusion and Poloxamer 407 were mixed to obtain nanoparticles of LLC (NP-LLC). Healthy male rats were randomized into six groups (n = 6/group): Control (C), GT, GT-NP-LLC, Exercise (Ex), GT+Ex, GT-NP-LLC+Ex. Body weight was significantly lower in all groups subjected to HIIT compared to C. The percentages of body mass reduction were 11.3, 13.0, 10.0 and 11.0% for Ex, GT+Ex, GT-NP-LLC and GT-NP-LLC+Ex, respectively, compared to control. GT-NP-LLC and Ex reduced triglycerides compared to C. GT and GT-NP-LLC supplementation combined with HIIT presented higher muscle hypertrophy (25 and 21%, respectively), better physical conditioning, and reduced body weight gain rate compared to HIIT by itself. Moreover, the effects of GT-NP-LLC itself on body mass and biochemical parameters are promising, suggesting NP-LLC could improve the bioavailability of GT.

Lyotropic liquid crystals for parenteral drug delivery

The necessity for long-term treatments of chronic diseases has encouraged the development of novel long-acting parenteral formulations intending to improve drug pharmacokinetics and therapeutic efficacy. Lately, one of the novel approaches has been developed based on lipid-based liquid crystals. The lyotropic liquid crystal (LLC) systems consist of amphiphilic molecules and are formed in presence of solvents with the most common types being cubic, hexagonal and lamellar mesophases. LC injectables have been recently developed based on polar lipids that spontaneously form liquid crystal nanoparticles in aqueous tissue environments to create the in-situ long-acting sustained-release depot to provide treatment efficacy over extended periods. In this manuscript, we have consolidated and summarized the various type of liquid crystals, recent formulation advancements, analytical evaluation, and therapeutic application of lyotropic liquid crystals in the field of parenteral sustained release drug delivery.

Emerging Developments on Nanocellulose as Liquid Crystals: A Biomimetic Approach

Biomimetics is the field of obtaining ideas from nature that can be applied in science, engineering, and medicine. The usefulness of cellulose nanocrystals (CNC) and their excellent characteristics in biomimetic applications are exciting and promising areas of present and future research. CNCs are bio-based nanostructured material that can be isolated from several natural biomasses. The CNCs are one-dimensional with a high aspect ratio. They possess high crystalline order and high chirality when they are allowed to assemble in concentrated dispersions. Recent studies have demonstrated that CNCs possess remarkable optical and chemical properties that can be used to fabricate liquid crystals. Research is present in the early stage to develop CNC-based solvent-free liquid crystals that behave like both crystalline solids and liquids and exhibit the phenomenon of birefringence in anisotropic media. All these characteristics are beneficial for several biomimetic applications. Moreover, the films of CNC show the property of iridescent colors, making it suitable for photonic applications in various devices, such as electro-optical devices and flat panel displays.

Physicochemical Evaluation and Pharmacodynamics of Itraconazole-loaded Liquid Crystal Precursor for Vaginal Delivery

PURPOSE

To develop liquid crystal (LC) precursor that can be used as a novel vaginal delivery system for Itraconazole (ITZ) and evaluate its pharmacodynamics. Methods: The LC precursor was prepared by using phytantriol (PYT) as lipid matrix and N, N-dimethylformamide (DMAC) as solvent. Swelling studies were performed to assess the phase conversion ability. The formulations were characterized by crossed polarized light microscopy (CPLM), small-angle X-ray scatterin (SAXS). Moreover, the rheological and in vitro drug release behavior were investigated. Then the vaginal retention time of ITZ in the optimal prescription was evaluated. Finally, the pharmacodynamics studies of the ITZ-loaded LC precursor were performed in a mouse model of vulvovaginal candidiasis (VVC). Results: The LC precursor could transform to LC gels after administration into the vagina. Based on PLM and SAXS, the LC gels, formed after phase-conversion, were cubic LC. The LC precursor was Non-Newtonian, while the LC gels exhibited a pseudo-plastic fluid behavior. In vitro release results revealed that F2 (68.0 %) had a higher cumulative drug release than that of F1 (59.17 %) at 72 h. Most of the LC gels could be retained in the vagina of mice for 24 - 36 h. Pharmacodynamics studies showed that there was only mild inflammation or no inflammatory stimulation in the control group. The ITZ-loaded LC precursor significantly improved the symptoms of vaginitis in mice and had a better therapeutic effect than that of positive control group. Conclusions: The ITZ-loaded LC precursor would be a promising formulation for vaginal drug delivery.

A novel drug delivery system -- Drug crystallization encapsulated liquid crystal emulsion

Liquid crystals (LCs) are widely used for drug delivery due to their controlled and sustained drug release properties. In this paper, drug crystallization encapsulated liquid crystal emulsion, a novel drug delivery system, was proposed. The lamellar liquid crystals formed by hydrogenated lecithin, which are similar to the skin stratum corneum lipid structure, are adopted as the drug carrier to encapsulate non-steroidal anti-inflammatory drugs (NSAIDs). As the model drug, ketoprofen exists in the hydrophobic core of emulsion as a drug crystal when squalane is used as the oil phase. The microstructure, sustained drug release behaviors, physicochemical property and biocompatibility of the system were examined by polarized light microscopy, rheological measurements, differential scanning calorimetry, X-ray diffraction, small-angle X-ray scattering, in vitro release study, and in vitro cellular cytotoxicity assay. The results have shown that the novel system lowers the drug crystal melting point and improves the thermal stability of liquid crystal structure. Besides, the excellent biocompatibility and sustained release property through the additional dissolution step of drug crystal show its application potentials in the topical cosmeceuticals. The results will also be helpful for in-depth understanding of the physical state of encapsulated drug in the liquid crystal carrier systems.

Preclinical study of methotrexate-based hydrogels versus surfactant based liquid crystal systems on psoriasis treatment

Psoriasis is an autoimmune, inflammatory and chronic skin disease in which cell growth and proliferation are increased, causing erythema, lesions and skin's peeling. Oral methotrexate (MTX) is the first-choice drug when phototherapy or retinoid treatment are not effective. Topical administration can be advantageous to better orientate the drug's delivery; however, the stratum corneum performs as a barrier for hydrofilic drugs penetration. This study sought to evaluate two different types of vehicles for MTX on the psoriasis treatment - hydrogel and liquid crystal systems (LCs). Lamellar and hexagonal liquid crystalline phases were selected from a ternary phase diagram based on polysorbate 80, isopropyl miristate and water. The hydrogel was based on alkylated carbomer (ACH). Rheological analysis showed ACH was more elastic than lamellar and hexagonal phases. ACH interacted better with pig skin than LCs in bioadhesion assay. Preclinical study revealed the ACH decreased inflammation in mice with induced psoriasis, being as effective as dexamethasone to regulate epidermis thickness, COX-2 and myeloperoxidase activity and TNF-α level, while LCs demonstrated inflammatory effect. Therefore, MTX-loaded hydrogel based platforms are indicated for local treatment of psoriasis and present great potential for further studies.

From n-layer planar ordering to the monolayer homeotropic structure of confined hard rods: The effect of shape anisotropy and wall-to-wall separation

Using the Parsons-Lee theory, we examined the effect of shape anisotropy and the wall-to-wall separation (H) on the phase behavior of the hard parallelepiped rods with dimensions L, D, and D (L>D) in such narrow slitlike pores which only one homeotropic layer can form. The phase structures, including biaxiality, planar nematic layering transition as well as planar to homeotropic, were studied for some separations in the range 2.5D≤H≤10.0D for H-D≤L<H.

Liquid crystalline nanodispersion functionalized with cell-penetrating peptides improves skin penetration and anti-inflammatory effect of lipoic acid after in vivo skin exposure to UVB radiation

In this study, the development and the performance of a new targeted liquid crystalline nanodispersion (LCN) by the attachment of cell-penetrating peptides (CPP) onto their surfaces to improve skin delivery of lipoic acid (LA) were evaluated. For that, the synthesis and characterization of this new platform as well as its spatiotemporal analysis from in vitro and in vivo topical application were explored and extensively discussed in this paper. The TAT or D4 peptides were chosen as CPP due to specific target strategies by the charge grouping on the skin surface or target the overexpressed epidermal growth factor receptor (EGFR) of cell membrane of keratinocytes, respectively. Thus, the nanoparticle characterization results when taken together suggested that designed LCNs maintained their hexagonal phase structure, nanoscale particle size, and low polydispersity index even after drug, lipopolymers, and peptide additions, which are proved to be favorable for topical skin delivery. There were no statistical differences among the LCNs investigated, except for superficial charge of LCN conjugated with TAT which may have altered the LCN zeta potential due to cationic charge of TAT amino acid sequence compared with D4. The cumulative amounts of LA retained into the skin were determined to be even higher coming from the targeted LCNs. Moreover, the exogenous antioxidant application of the LA from the LCNs can prevent ROS damage, which was demonstrated by this study with the less myeloperoxidase (MPO) activity and decrease in cytokine levels (TNF-alpha and IL-1β) generated by the oxidative stress modulation. Together, the data presented highlights the potential of these targeted LCNs, and overall, opens new frontiers for preclinical trials.

Lyotropic Liquid Crystal-Based Membranes for Water Remediation: Fabrication, Characterization and Performance Evaluation

In water remediation, biomimetic membranes are gaining much attention due to their selectivity, dynamic stability, nontoxicity, and biocompatibility. Lyotropic liquid crystals (LLCs) are self-organizing networks that can conform to an array of geometries with high pore densities. As such, LLCs are excellent membrane materials for water applications because they are water insoluble and are manipulated to conform to an array of morphologies that provide natural water channels that are readily tunable in size. They have the ability to create uniform pores, between the range of 1 and 5 nm, with large surface areas. Thus, this work focuses on the design, fabrication, and characterization of LLC-modified Janus-type membranes for forward osmosis applications. Physical characterization of the membranes was performed using scanning electron microscopy (SEM), and the results show an open-pore radius and the presence of both finger- and sponge-like pores depending on membrane preparation. The contact angle assessment indicates that as the membranes are further modified with other polymers (e.g., PAN), higher hydrophilicity and surface energy are achieved. Moreover, the Brunauer-Emmett-Teller (BET) analysis showed a significant variation in the pore distribution between membranes. Functionalized membranes presented satisfactory water flux and superior salt rejection compared to nonfunctionalized membranes. SupPACMoDS membranes are 83% more efficient at preventing salt back flux than the nonmodified version. This is credited to the thickness and pore structure provided by the PAN support layer in the membrane.

Novel Trends in Lyotropic Liquid Crystals

We introduce and shortly summarize a variety of more recent aspects of lyotropic liquid crystals (LLCs), which have drawn the attention of the liquid crystal and soft matter community and have recently led to an increasing number of groups studying this fascinating class of materials, alongside their normal activities in thermotopic LCs. The diversity of topics ranges from amphiphilic to inorganic liquid crystals, clays and biological liquid crystals, such as viruses, cellulose or DNA, to strongly anisotropic materials such as nanotubes, nanowires or graphene oxide dispersed in isotropic solvents. We conclude our admittedly somewhat subjective overview with materials exhibiting some fascinating properties, such as chromonics, ferroelectric lyotropics and active liquid crystals and living lyotropics, before we point out some possible and emerging applications of a class of materials that has long been standing in the shadow of the well-known applications of thermotropic liquid crystals, namely displays and electro-optic devices.

A Novel Phytantriol-Based In Situ Liquid Crystal Gel for Vaginal Delivery

The purpose of this paper was to evaluate the potential of in situ liquid crystal (LC) gels based on phytantriol (PYT) for vaginal delivery. The PYT-based in situ liquid crystal gels (PILGs) were prepared by a vortex method using PYT, ethanol (ET), and water (in the ratio of 64:16:20, w/w). The internal structures of PILGs and cubic LC gels (formed by PILG phase conversion) were confirmed by crossed polarized light microscopy (PLM) and small-angle X-ray scattering (SAXS). And the rheological tests showed that PILGs had small viscosity and excellent fluidity. The viscosities of cubic LC gels were 4~5 orders of magnitude higher than PILGs. In vitro phase conversion experiment showed that PILGs required little vaginal fluid (64.56 μL/100 mg) and time (3.92 s) to transform to LC gels. Furthermore, cubic LC gels could reside in the vaginas for more than 12 h in vivo. The in vitro release revealed that sinomenine hydrochloride (SMH) could be sustained released from the cubic gels over a period of 144 h, which was prior to SMH solution and carbomer gels. An in vivo vaginal mucosa irritation study indicated that PILGs were nonirritant and might be suitable for various vaginal applications. In conclusion, PILGs might represent a potential vaginal delivery strategy to overcome the limitations of traditional treatments.

Rapid detection of pathogens using lyotropic liquid crystals

Lyotropic liquid crystals play an important role in many biological environments, such as micelles, liposomes, and phospholipid bilayers of cell membranes. In this work, we explore the performance of lyotropic liquid crystals as biosensors for macromolecules, proteins and whole microorganisms in hydrophilic media, i.e., the natural media where these specimens exist. The aim is to detect specific targets employing simple, unpowered sensors that can be used in the field, with minimum additional equipment. A number of different structures have been explored. The novelty in this work is the inclusion of a new optical effect, flow enhanced amplification, that allows for the semiquantitative detection of microscopic targets in lyotropic liquid crystal cells using the naked eye only.

Characterization of Lipid-Based Lyotropic Liquid Crystal and Effects of Guest Molecules on Its Microstructure: a Systematic Review

Liquid crystals (LCs) are conventionally divided into thermotropic or lyotropic, based on the organization and sequence of the controlled molecular system. Lipid-based lyotropic liquid crystal (LLC), such as lamellar (Lα), bicontinuous cubic (Q_II), or hexagonal (H_II) phases, have attracted wide interest in the last few decades due to their practical potential in diverse applications and notable structural complexity. Various guest molecules, such as biopharmaceuticals, chemicals, and additives, can be solubilized in either aqueous or oily phase. And the LLC microstructure can be altered to affect the rate of drug release eventually. To utilize these microstructural variations to adjust the drug release in drug delivery system (DDS), it is crucial to understand the structure variations of the LLC caused by different types of guest molecules. Therefore, in this article, we review the effect of guest molecules on lipid-based LLC microstructures. In particular, we focus on the different characterization methods to evaluate this change caused by guest substances, such as polarized light microscopy (PLM), small-angle X-ray scattering (SAXS), Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), self-diffusion nuclear magnetic resonance (SD-NMR), and so on.

Thermotropic Liquid Crystal-Assisted Chemical and Biological Sensors

In this review article, we analyze recent progress in the application of liquid crystal-assisted advanced functional materials for sensing biological and chemical analytes. Multiple research groups demonstrate substantial interest in liquid crystal (LC) sensing platforms, generating an increasing number of scientific articles. We review trends in implementing LC sensing techniques and identify common problems related to the stability and reliability of the sensing materials as well as to experimental set-ups. Finally, we suggest possible means of bridging scientific findings to viable and attractive LC sensor platforms.