Biomimetic-Functionalized, Tannic Acid-Templated Mesoporous Silica as a New Support for Immobilization of NHase

A critical review on biomass-based sustainable biorefineries using nanobiocatalysts: Opportunities, challenges, and future perspectives

Biocatalysts, including live microbial cells/enzymes, have been considered a predominant and advantageous tool for effectively transforming biomass into biofuels and valued biochemicals. However, high production costs, separation, and reusability limit its practical application. Immobilization of single and multi-enzymes by employing different nano-supports have gained massive attention because of its elevated exterior domain and high enzymatic performance. Application of nanobiocatalyst can overcome the drawbacks mainly, stability and reusability, thus reflecting the importance of biomass-based biorefinery to make it profitable and sustainable. This review provides an in-depth, comprehensive analysis of nanobiocatalysts systems concerning nano supports and biocatalytic performance characteristics. Furthermore, the effects of nanobiocatalyst on waste biomass to biofuel and valued bioproducts in the biorefinery approach and their critical assessment are discussed. Lastly, this review elaborates commercialization and market outlooks of the bioconversion process using nanobiocatalyst, followed by different strategies to overcome the limitations and future research directions on nanobiocatalytic-based industrial bioprocesses.

Facile preparation of MOF-derived MHCo3O4&Co/C with a hierarchical porous structure for entrapping enzymes: having both high stability and catalytic activity

MHCo3O4&Co/C with hierarchical porous structure are functionally modified with “polydopamine (PDA)” bionic membrane for entrapping horseradate peroxidase (HRP).

Effect of tannic acid-templated mesoporous silica nanoparticles on iron-induced oxidative stress and liver toxicity in rats

The present study sought to investigate the effects of amino-functionalized tannic acid-templated mesoporous silica nanoparticles (TA-MS-NH₂ NPs) on giving rats protection against iron-induced liver toxicity. To this end, the TA-MS-NH₂ NPs were characterized using field-emission scanning electron microscope (FE-SEM), transmission electron microscopy (TEM), dynamic light scattering (DLS), and Fourier-transform infrared spectroscopy (FTIR). Moreover, 50 Wistar rats were randomly divided into one control group (group 1) and four experimental groups (groups 2- 5) (n = 10), each of which received 100 mg/kg oral normal saline and FeSO₄, respectively. Then, post-exposure hepatotoxicity and oxidative stress markers were measured in two intervals, i.e., after 4 and 24 h, followed by the measurement of the acute iron toxicity. Furthermore, hepatotoxicity markers, including the alanine aminotransferase (ALT), aspartate aminotransferase (AST), alkaline phosphatase (ALP), and total antioxidant capacity (TAC), were measured via Ferric Reducing Antioxidant Power (FRAP) and 2,2,1-diphenyl-1-picrylhydrazyl (DPPH) assays. Also, malondialdehyde (MDA), total thiol groups, advanced oxidation protein products (AOPP), and nitrite/nitrate (NOx) levels were measured as oxidative stress markers in the serum samples. The results indicated that oral administration of iron significantly elevated the liver enzymes and altered the level of oxidative stress markers. It was also found that treatment with TA-MS-NH₂ NPs meaningfully protected against hepatotoxicity, decreased ALT, AST, ALP, and significantly improved oxidative stress markers by decreasing MDA, AOPP, and NOx levels and increasing TAC and thiol group contents, proving that TA-MS-NH₂ NPs could protect rats against iron-induced acute liver toxicity through their antioxidant features.

Recent progress in magnetic nanoparticles and mesoporous materials for enzyme immobilization: an update

Enzymes immobilized onto substrates with excellent selectivity and activity show a high stability and can withstand extreme experimental conditions, and their performance has been shown to be retained after repeated uses. Applications of immobilized enzymes in various fields benefit from their unique characteristics. Common methods, including adsorption, encapsulation, covalent attachment and crosslinking, and other emerging approaches (e.g., MOFs) of enzyme immobilization have been developed mostly in recent years. In accordance with these immobilization methods, the present review elaborates the application of magnetic separable nanoparticles and functionalized SBA-15 and MCM-41 mesoporous materials used in the immobilization of enzymes.

Short-Term Soil Flushing with Tannic Acid and Its Effect on Metal Mobilization and Selected Properties of Calcareous Soil

Cadmium, Cu, Ni, Pb, and Zn removal via soil flushing with tannic acid (TA) as a plant biosurfactant was studied. The soil was treated for 30 h in a column reactor at a constant TA concentration and pH (3%, pH 4) and at variable TA flow rates (0.5 mL/min or 1 mL/min). In the soil leachates, pH, electrical conductivity (EC), total dissolved organic carbon, and metal concentrations were monitored. Before and after flushing, soil pH, EC, organic matter content, and cation exchange capacity (CEC) were determined. To analyze the organic matter composition, pyrolysis as well as thermally assisted hydrolysis and methylation coupled with gas chromatography-mass spectrometry were used. Metal fractionation in unflushed and flushed soil was analyzed using a modified sequential extraction method. The data on cumulative metal removal were analyzed using OriginPro 8.0 software (OriginLab Corporation, Northampton, MA, USA) and were fitted to 4-parameter logistic sigmoidal model. It was found that flushing time had a stronger influence on metal removal than flow rate. The overall efficiency of metal removal (expressed as the ratio between flushed metal concentration and total metal concentration in soil) at the higher flow rate decreased in this order: Cd (86%) > Ni (44%) > Cu (29%) ≈ Zn (26%) > Pb (15%). Metals were removed from the exchangeable fraction and redistributed into the reducible fraction. After flushing, the soil had a lower pH, EC, and CEC; a higher organic matter content; the composition of the organic matter had changed (incorporation of TA structures). Our results prove that soil flushing with TA is a promising approach to decrease metal concentration in soil and to facilitate carbon sequestration in soil.

Lipase Immobilization in Mesoporous Silica Nanoparticles for Biofuel Production

Lipases are ubiquitous enzymes whose physiological role is the hydrolysis of triacylglycerol into fatty acids. They are the most studied and industrially interesting enzymes, thanks to their versatility to promote a plethora of reactions on a wide range of substrates. In fact, depending on the reaction conditions, they can also catalyze synthesis reactions, such as esterification, acidolysis and transesterification. The latter is particularly important for biodiesel production. Biodiesel can be produced from animal fats or vegetable oils and is considered as a biodegradable, non-toxic and renewable energy source. The use of lipases as industrial catalysts is subordinated to their immobilization on insoluble supports, to allow multiple uses and use in continuous processes, but also to stabilize the enzyme, intrinsically prone to denaturation with consequent loss of activity. Among the materials that can be used for lipase immobilization, mesoporous silica nanoparticles represent a good choice due to the combination of thermal and mechanical stability with controlled textural characteristics. Moreover, the presence of abundant surface hydroxyl groups allows for easy chemical surface functionalization. This latter aspect has the main importance since lipases have a high affinity with hydrophobic supports. The objective of this work is to provide an overview of the recent progress of lipase immobilization in mesoporous silica nanoparticles with a focus on biodiesel production.

Nitrile hydratase mediated green synthesis of lactamide by immobilizing Rhodococcus pyridinivorans NIT-36 cells on N, N'-Methylene bis-acrylamide activated chitosan

In this paper green synthesis of an important commodity chemical lactamide has been undertaken using chitosan immobilized Rhodococcus pyridinivorans NIT-36 harbouring nitrile hydratase (NHase) enzyme. The cells immobilization (300 mg/g) is based on the partial entrapment of cells by suspension cross-linking technique facilitated by N, N'-Methylene bis-acrylamide. In the repeated-use experiments, the immobilized cells retained 80% of its initial activity when stored at 4 °C for 30 days. NHase activity of free and immobilized cells was studied over temperature ranging from 25 °C to 60 °C. The activity for free cells showed a sharp decline of 70% when the reaction temperature was elevated from 45 °C to 50 °C whereas chitosan immobilized cells retained their activity in the same temperature range. A fed-batch reaction was designed and the immobilized cells showed 100% similar enzymatic pattern for five consecutive rounds which gradually decreased in following cycles. A volumetric productivity of 20 g/L and catalytic productivity of 8.33 g/g dcw/h for lactamide were achieved.

Nanoantioxidant-Based Silica Particles as Flavonoid Carrier for Drug Delivery Applications

Nanosystems used in pharmaceutical formulations have shown promising results in enhancing the administration of drugs of difficult formulations. In particular, porous silica nanoparticles have demonstrated excellent properties for application in biological systems; however, there are still several challenges related to the development of more effective and biocompatible materials. An interesting approach to enhance these nanomaterials has been the development of nanoantioxidant carriers. In this work, a hybrid nanoantioxidant carrier based on porous silica nanoplatform with rosmarinic acid antioxidant immobilized on its surface were developed and characterized. Techniques such as dynamic light scattering (DLS), zeta potential, transmission electron microscopy (TEM), N2 adsorption-desorption measurements, differential scanning calorimetry (DSC), Fourier transform-infrared spectroscopy (FT-IR), and 2,2-diphenyl-1-picrylhydrazyl (DPPH●) assay were used to characterize and evaluate the antioxidant activity of nanocarriers. In addition, drug release profile was evaluated using two biorelevant media. The antioxidant activity of rosmarinic acid was maintained, suggesting the correct disposition of the moiety. Kinetic studies reveal that more morin is released in the simulated intestinal fluid than in the gastric one, while an anomalous non-Fickian release mechanism was observed. These results suggest a promising antioxidant nanocarrier suitable for future application in drug delivery.

Comparative study of ASNase immobilization on tannic acid-modified magnetic Fe3O4/SBA-15 nanoparticles to enhance stability and reusability

Herein, we report the preparation of tannic acid-modified magnetic Fe₃O₄/SBA-15 nanoparticles and their application as a carrier matrix for immobilization of ASNase, an anticancer enzyme-drug.

Comparison study between mesoporous silica nanoscale microsphere and active carbon used as the matrix of shape-stabilized phase change material

Mesoporous silica nanoscale microsphere (MSNM), with a special morphology, high porosity, large pore volume and specific surface area, was successfully prepared and used as the matrix material of lauric acid (LA) to prepare a favorable shape-stabilized phase change material (LA/MSNM). The porous network structure of MSNM is effective to prevent the leakage and enhance the thermal stability of LA/MSNM. For comparison, shape-stabilized phase change material of LA/AC, which contained commercially purchased active carbon (AC) and LA, was prepared by the same method. Characterizations of LA/MSNM and LA/AC, such as chemical properties, structure, thermal properties and crystallization properties were studied. The mechanisms of interaction between LA molecules and MSNM or AC were explicated. The results of TGA test showed that the LA/MSNM and LA/AC had superior thermal stability, and however, the melting and solidification enthalpies of LA/MSNM were much higher than that of LA/AC, which was attributed that the loading capacity of MSNM was better than that of LA/AC. All of the study results demonstrated that the mesoporous silica nanoscale microspheres of MSNM synthesized in this study possessed the potential for practical applications as a suitable supporter of organic phase change materials.

The effect of pore morphology on the catalytic performance of β-glucosidase immobilized into mesoporous silica

β-Glucosidase (BG) was immobilized by adsorption on wrinkled silica nanoparticles (WSNs) and on tannic acid-templated mesoporous silica nanoparticles (TA-MSNPs). The effect induced by a different morphology of the pores of the sorbent on the catalytic performance of β-glucosidase was investigated. A complete textural and morphological characterization of the two samples was performed by Brunauer–Emmett–Teller (BET) method, Fourier Transform Infrared (FT-IR) and transmission electron microscopy (TEM). The results demonstrated that the catalytic performance of the immobilized enzyme depends on the pores size of sorbent but a key factor is the pores morphology. In fact, the BG immobilized on WSNs and TA-MSNPs (BG/WSNs and BG/TA-MSNPs) shows in both cases good catalytic performances in cellobiose hydrolysis, but the catalyst with the best performance is BG/WSNs, in which the support exhibits a central-radial pore structure and a hierarchical trimodal micro-mesoporous pore size. This peculiar morphology allows the enzyme to settle in a place where the interactions with the walls are maximized, increasing its conformational rigidity. Furthermore, the enzyme is prevalently collocated in the interior of pore so that the pores are not completely capped.