Preconcentration and Determination of Perfluoroalkyl Substances (PFASs) in Water Samples by Bamboo Charcoal-Based Solid-Phase Extraction Prior to Liquid Chromatography-Tandem Mass Spectrometry

Application of magnetic carbon nanotube composite nanospheres in magnetic solid-phase extraction of trace perfluoroalkyl substances from environmental water samples

The layer-by-layer assembly technique was used to synthesize novel multiwalled carbon nanotubes (MWCNTs) on magnetic carbon (Fe₃O₄@C) nanospheres, which were then used to extract six perfluoroalkyl substances (PFAS) in environmental real water samples using ultra high-performance liquid chromatography coupled to tandem mass spectrometry. The as-synthesized sorbent MWCNTs@Fe₃O₄@C was employed for magnetic solid-phase extraction (MSPE). The as-prepared MWCNTs@Fe₃O₄@C was characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and vibrating sample magnetometer (VSM). The main extraction parameters were systematically optimized by Box-Behnken design. Under optimal conditions, excellent results were achieved. The synthesized sorbent showed wide linear ranges (0.1-1000 ng L^-1), low detection limits (0.03-0.09 ng L^-1) and good repeatability (3.80%-9.52%) for extracting and detecting six PFAS. The developed method was also applied to analyze six PFAS from environmental water samples. This study indicated that MWCNTs@Fe₃O₄@C composites are promising materials for the extraction and determination of PFAS from water samples.

Detection methods for sub-nanogram level of emerging pollutants - Per and polyfluoroalkyl substances

Per- and polyfluoroalkyl substances (PFAS) are organofluorine compounds has been manufactured for more than five decades and used in different purposes. Among persistent organic pollutants, PFAS are toxic, bioaccumulative in humans, wildlife, and global environment. As per environmental protection agency (EPA) guidelines, the perfluorooctanoate and perfluorooctane sulfonate permissible limit was 0.07 ng/L in drinking water. When the concentration exceeds the acceptable limit, it has negative consequences for humans. In such a case, PFAS monitoring is critical, and a quick detection technique are highly needed. Health departments and regulatory agencies have interests in monitoring of PFAS presences and exposures. For the detection of PFAS, numerous highly precise and sensitive chromatographic methods are available. However, the drawbacks of analytical techniques include timely sample preparations and the lack of on-site applicability. As a result, there is an increasing demand for simple sensor systems for monitoring of PFAS in real field samples. In this review, we first describe the sample pre-treatment and analytical techniques for the detection of PFAS. Second, we broadly discussed available sensor system for the quantification of PFAS in different filed samples. Finally, future trends in PFASs sensor are also presented.

Recent advances in mass spectrometry analytical techniques for per- and polyfluoroalkyl substances (PFAS)

The ubiquitous presence of per- and polyfluoroalkyl substances (PFAS) in various environments has led to increasing concern, and these chemicals have been confirmed as global contaminants. Following the chemical regulatory restrictions imposed, PFAS alternatives that are presumed to be less toxic have been manufactured to replace the traditional ones in the market. However, owing to the original release and alternative usage, continuous accumulation of PFAS has been reported in environmental and human samples, with uncertain consequences for ecosystem and human health. It is crucial to promote and improve existing analytical techniques to facilitate the detection of trace amounts of PFAS in diverse environmental matrices. This review summarizes analytical methods that have been applied to and advanced for targeted detection and suspect screening of PFAS, which mainly include (i) sampling and sample preparation methods for various environment matrices and organisms, and quality assurance/quality control during the analysis process, and (ii) quantitative methods for targeted analysis and automated suspect screening strategies for non-targeted PFAS analysis, together with their applications, advantages, shortcomings, and need for new method development.

Detection and removal of poly and perfluoroalkyl polluting substances for sustainable environment

PFAs (poly and perfluoroalkyl compounds) are hazardous and bioaccumulative chemicals that do not readily biodegrade or neutralize under normal environmental conditions. They have various industrial, commercial, domestic and defence applications. According to the Organization for Economic Co-operation and Development, there are around 4700 PFAs registered to date. They are present in every stream of life, and they are often emerging and are even difficult to be detected by the standard chemical methods. This review aims to focus on the sources of various PFAs and the toxicities they impose on the environment and especially on humankind. Drinking water, food packaging, industrial areas and commercial household products are the primary PFAs sources. Some of the well-known treatment methods for remediation of PFAs presented in the literature are activated carbon, filtration, reverse osmosis, nano filtration, oxidation processes etc. The crucial stage of handling the PFAs occurs in determining and analysing the type of PFA and its remedy. This paper provides a state-of-the-art review of determination & tools, and techniques for remediation of PFAs in the environment. Improving new treatment methodologies that are economical and sustainable are essential for excluding the PFAs from the environment.

Room-temperature synthesis of amino-functionalized magnetic covalent organic frameworks for efficient extraction of perfluoroalkyl acids in environmental water samples

The novel amino-functionalized magnetic covalent organic framework nanocomposites (Fe₃O₄@[NH₂]-COFs) were fabricated at room temperature, which were explored as a magnetic adsorbent for magnetic solid-phase extraction (MSPE). On the basis of the hydrophobic surfaces of magnetic nanocomposites and introduction of primary amines into the COFs shell, Fe₃O₄@[NH₂]-COFs displayed excellent enrichment capacity in "catching" ultratrace perfluoroalkyl acids (PFAAs) from water samples because of the synergistic combination of hydrophobic and electrostatic interactions between PFAAs and Fe₃O₄@[NH₂]-COFs. Under the optimized pretreatment and instrumental parameters, the proposed pretreatment approach, which hybridized MSPE using Fe₃O₄@[NH₂]-COFs and HPLC-MS/MS, displayed favorable linearity (10-10,000 ng L^-1) with R² (0.9990-0.9999), low limits of detection (0.05-0.38 ng L^-1), and excellent repeatability (3.7-9.2%). Moreover, the established approach was successfully utilized to determine PFAAs in real water samples with spiked recoveries ranging from 72.1% to 115.4%. Results indicated that Fe₃O₄@[NH₂]-COFs would be a potential alternative for MSPE of PFAAs at ultra-low levels.

Organophosphate Flame Retardants and Perfluoroalkyl Substances in Drinking Water Treatment Plants from Korea: Occurrence and Human Exposure

In this study, the concentrations of organophosphate flame retardants (OPFR) and perfluoroalkyl substances (PFAS) were investigated in raw water and treated water samples obtained from 18 drinking water treatment plants (DWTPs). The ∑13OPFR concentrations in the treated water samples (29.5-122 ng/L; median 47.5 ng/L) were lower than those in the raw water (37.7-231 ng/L; median 98.1 ng/L), which indicated the positive removal rates (0-80%) of ∑13OPFR in the DWTPs. The removal efficiencies of ∑27PFAS in the DWTPs ranged from -200% to 50%, with the ∑27PFAS concentrations in the raw water (4.15-154 ng/L; median 32.0 ng/L) being similar to or lower than those in the treated water (4.74-116 ng/L; median 42.2 ng/L). Among OPFR, tris(chloroisopropyl) phosphate (TCIPP) and tris(2-chloroethyl) phosphate (TCEP) were dominant in both raw water and treated water samples obtained from the DWTPs. The dominant PFAS (perfluorooctanoic acid (PFOA) and perfluorohexanoic acid (PFHxA)) in the raw water samples were slightly different from those in the treated water samples (PFOA, L-perfluorohexane sulfonate (L-PFHxS), and PFHxA). The 95-percentile daily intakes of ∑13OPFR and ∑27PFAS via drinking water consumption were estimated to be up to 4.9 ng/kg/d and 0.22 ng/kg/d, respectively. The hazard index values of OPFR and PFAS were lower than 1, suggesting the risks less than known hazardous levels.

Recent Developments of PFAS-Detecting Sensors and Future Direction: A Review

Per- and poly-fluoroalkyl substances (PFASs) have recently been labeled as toxic constituents that exist in many aqueous environments. However, traditional methods used to determine the level of PFASs are often not appropriate for continuous environmental monitoring and management. Based on the current state of research, PFAS-detecting sensors have surfaced as a promising method of determination. These sensors are an innovative solution with characteristics that allow for in situ, low-cost, and easy-to-use capabilities. This paper presents a comprehensive review of the recent developments in PFAS-detecting sensors, and why the literature on determination methods has shifted in this direction compared to the traditional methods used. PFAS-detecting sensors discussed herein are primarily categorized in terms of the detection mechanism used. The topics covered also include the current limitations, as well as insight on the future direction of PFAS analyses. This paper is expected to be useful for the smart sensing technology development of PFAS detection methods and the associated environmental management best practices in smart cities of the future.