Synthesis and Application of Scaffolds of Chitosan-Graphene Oxide by the Freeze-Drying Method for Tissue Regeneration

Developmental prospects of carrageenan-based wound dressing films: Unveiling techno-functional properties and freeze-drying technology for the development of absorbent films - A review

This review explores the intricate wound healing process, emphasizing the critical role of dressing material selection, particularly for chronic wounds with high exudate levels. The aim is to tailor biodegradable dressings for comprehensive healing, focusing on maximizing moisture retention, a vital element for adequate recovery. Researchers are designing advanced wound dressings that enhance techno-functional and bioactive properties, minimizing healing time and ensuring cost-effective care. The study delves into wound dressing materials, highlighting carrageenan biocomposites superior attributes and potential in advancing wound care. Carrageenan's versatility in various biomedical applications demonstrates its potential for tissue repair, bone regeneration, and drug delivery. Ongoing research explores synergistic effects by combining carrageenan with other novel materials, aiming for complete biocompatibility. As innovative solutions emerge, carrageenan-based wound-healing medical devices are poised for global accessibility, addressing challenges associated with the complex wound-healing process. The exceptional physico-mechanical properties of carrageenan make it well-suited for highly exudating wounds, offering a promising avenue to revolutionize wound care through freeze-drying techniques. This thorough approach to evaluating the wound healing effectiveness of carrageenan-based films, particularly emphasizing the development potential of lyophilized films, has the potential to significantly improve the quality of life for patients receiving wound healing treatments.

Biological activity of lyophilized chitosan scaffolds with inclusion of chitosan and zinc oxide nanoparticles

The constant demand for biocompatible and non-invasive materials for regenerative medicine in accidents and various diseases has driven the development of innovative biomaterials that promote biomedical applications. In this context, using sol-gel and ionotropic gelation methods, zinc oxide nanoparticles (NPs-ZnO) and chitosan nanoparticles (NPs-CS) were synthesized with sizes of 20.0 nm and 11.98 nm, respectively. These nanoparticles were incorporated into chitosan scaffolds through the freeze-drying method, generating a porous morphology with small (<100 μm), medium (100-200 μm), and large (200-450 μm) pore sizes. Moreover, the four formulations showed preliminary bioactivity after hydrolytic degradation, facilitating the formation of a hydroxyapatite (HA) layer on the scaffold surface, as evidenced by the presence of Ca (4%) and P (5.1%) during hydrolytic degradation. The scaffolds exhibited average antibacterial activity of F1 = 92.93%, F2 = 99.90%, F3 = 74.10%, and F4 = 88.72% against four bacterial strains: K. pneumoniae, E. cloacae, S. enterica, and S. aureus. In vivo, evaluation confirmed the biocompatibility of the functionalized scaffolds, where F2 showed accelerated resorption attributed to the NPs-ZnO. At the same time, F3 exhibited controlled degradation with NPs-CS acting as initiation points for degradation. On the other hand, F4 combined NPs-CS and NPs-ZnO, resulting in progressive degradation, reduced inflammation, and an organized extracellular matrix. All the results presented expand the boundaries in tissue engineering and regenerative medicine by highlighting the crucial role of nanoparticles in optimizing scaffold properties.

Varying the degree of oxidation of graphite: effect of oxidation time and oxidant mass

In this work, we employ a fast and less toxic modified Hummers' method to develop graphene oxide (GO) with varying degrees of oxidation and investigate the effect of the latter on the structure and the thermal properties of the synthesized materials. Two different key parameters, the time of the oxidation reaction and the mass of the oxidation agent, were systematically altered in order to fine tune the oxidation degree. All graphene oxides were characterized by a plethora of experimental techniques, like X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) as well as infrared spectroscopy (IR) and X-ray photoelectron spectroscopy (XPS) for their structural, thermal and chemical identification. The results revealed that for a certain amount of oxidant, the time does not affect the final degree of oxidation of the materials, at least for the examined reaction times, because very similar structural patterns and thermal properties were obtained. At the same time, the oxygen-containing functional groups were found very similar. On the other hand, the degree of oxidation was found highly dependent on the mass of the oxidizing agent. XRD analysis showed a systematic increase of the interlayer distance of the synthesized GOs with the increase of the oxidant mass, whereas both the enthalpy of reduction and the % weight loss were increased. Moreover, XPS measurements provided a quantitative evaluation of the amount of carbon and oxygen in the materials; the increase of the oxidant mass led to a decrease of the total carbon content with the concurrent increase of the total oxygen amount.

Graphene in 3D Bioprinting

Three-dimensional (3D) bioprinting is a fast prototyping fabrication approach that allows the development of new implants for tissue restoration. Although various materials have been utilized for this process, they lack mechanical, electrical, chemical, and biological properties. To overcome those limitations, graphene-based materials demonstrate unique mechanical and electrical properties, morphology, and impermeability, making them excellent candidates for 3D bioprinting. This review summarizes the latest developments in graphene-based materials in 3D printing and their application in tissue engineering and regenerative medicine. Over the years, different 3D printing approaches have utilized graphene-based materials, such as graphene, graphene oxide (GO), reduced GO (rGO), and functional GO (fGO). This process involves controlling multiple factors, such as graphene dispersion, viscosity, and post-curing, which impact the properties of the 3D-printed graphene-based constructs. To this end, those materials combined with 3D printing approaches have demonstrated prominent regeneration potential for bone, neural, cardiac, and skin tissues. Overall, graphene in 3D bioprinting may pave the way for new regenerative strategies with translational implications in orthopedics, neurology, and cardiovascular areas.

Chitosan scaffolds: Expanding horizons in biomedical applications

Chitosan, a natural polysaccharide from chitin, shows promise as a biomaterial for various biomedical applications due to its biocompatibility, biodegradability, antibacterial activity, and ease of modification. This review overviews "chitosan scaffolds" use in diverse biomedical applications. It emphasizes chitosan's structural and biological properties and explores fabrication methods like gelation, electrospinning, and 3D printing, which influence scaffold architecture and mechanical properties. The review focuses on chitosan scaffolds in tissue engineering and regenerative medicine, highlighting their role in bone, cartilage, skin, nerve, and vascular tissue regeneration, supporting cell adhesion, proliferation, and differentiation. Investigations into incorporating bioactive compounds, growth factors, and nanoparticles for improved therapeutic effects are discussed. The review also examines chitosan scaffolds in drug delivery systems, leveraging their prolonged release capabilities and ability to encapsulate medicines for targeted and controlled drug delivery. Moreover, it explores chitosan's antibacterial activity and potential for wound healing and infection management in biomedical contexts. Lastly, the review discusses challenges and future objectives, emphasizing the need for improved scaffold design, mechanical qualities, and understanding of interactions with host tissues. In summary, chitosan scaffolds hold significant potential in various biological applications, and this review underscores their promising role in advancing biomedical science.

Graphene oxide-alginate hydrogel-based indicator displacement assay integrated with diaper for non-invasive Alzheimer's disease screening

Pyrocatechol violet/copper ion-graphene oxide/alginate (PV/Cu2+-GO/Alg) hydrogel was fabricated and applied as a colorimetric sensor for monitoring urinary cysteine via an indicator-displacement assay (IDA) and Cu2+-cysteine affinity pair. The hydrogel-based sensor was formed by Ca2+ cations cross-linked PV/Cu2+-GO/Alg. The morphologies of hydrogel were characterized by field-emission scanning electron microscopy with energy-dispersive X-ray spectroscopy and Fourier-transform Raman spectroscopy. Incorporating GO into the hydrogel improved its uniformity of porosity, large surface area, and compressive strength, leading to amplified colorimetric signals of the hydrogel sensor. Under optimal conditions, this sensor offered a linear range of 0.0-0.5 g/L with a detection limit of 0.05 g/L for cysteine without interfering effects in urine. Furthermore, this hydrogel-based sensor was applied for urinary cysteine detection and validated with laser desorption ionization mass spectrometry. This platform could be used to determine cysteine at its cutoff (0.25 g/L) in human urine, which was distinguishable between normal and abnormal individuals, to evaluate an early stage of Alzheimer's disease. Eventually, this system was integrated with diapers for a wearable cysteine sensor.

Resorbable Membranes for Guided Bone Regeneration: Critical Features, Potentials, and Limitations

Lack of horizontal and vertical bone at the site of an implant can lead to significant clinical problems that need to be addressed before implant treatment can take place. Guided bone regeneration (GBR) is a commonly used surgical procedure that employs a barrier membrane to encourage the growth of new bone tissue in areas where bone has been lost due to injury or disease. It is a promising approach to achieve desired repair in bone tissue and is widely accepted and used in approximately 40% of patients with bone defects. In this Review, we provide a comprehensive examination of recent advances in resorbable membranes for GBR including natural materials such as chitosan, collagen, silk fibroin, along with synthetic materials such as polyglycolic acid (PGA), polycaprolactone (PCL), polyethylene glycol (PEG), and their copolymers. In addition, the properties of these materials including foreign body reaction, mechanical stability, antibacterial property, and growth factor delivery performance will be compared and discussed. Finally, future directions for resorbable membrane development and potential clinical applications will be highlighted.

Chitosan-Based Scaffolds for the Treatment of Myocardial Infarction: A Systematic Review

Cardiovascular diseases (CVD), such as myocardial infarction (MI), constitute one of the world's leading causes of annual deaths. This cardiomyopathy generates a tissue scar with poor anatomical properties and cell necrosis that can lead to heart failure. Necrotic tissue repair is required through pharmaceutical or surgical treatments to avoid such loss, which has associated adverse collateral effects. However, to recover the infarcted myocardial tissue, biopolymer-based scaffolds are used as safer alternative treatments with fewer side effects due to their biocompatibility, chemical adaptability and biodegradability. For this reason, a systematic review of the literature from the last five years on the production and application of chitosan scaffolds for the reconstructive engineering of myocardial tissue was carried out. Seventy-five records were included for review using the "preferred reporting items for systematic reviews and meta-analyses" data collection strategy. It was observed that the chitosan scaffolds have a remarkable capacity for restoring the essential functions of the heart through the mimicry of its physiological environment and with a controlled porosity that allows for the exchange of nutrients, the improvement of the electrical conductivity and the stimulation of cell differentiation of the stem cells. In addition, the chitosan scaffolds can significantly improve angiogenesis in the infarcted tissue by stimulating the production of the glycoprotein receptors of the vascular endothelial growth factor (VEGF) family. Therefore, the possible mechanisms of action of the chitosan scaffolds on cardiomyocytes and stem cells were analyzed. For all the advantages observed, it is considered that the treatment of MI with the chitosan scaffolds is promising, showing multiple advantages within the regenerative therapies of CVD.

Synthesis and characterization of a novel, pH-responsive sustained release nanocarrier using polyethylene glycol, graphene oxide, and natural silk fibroin protein by a green nano emulsification method to enhance cancer treatment

In this study, for the first time, by employing a simple and efficient double nano-emulsification method and using sweet almond oil as the organic phase, polyethylene glycol (PEG)/graphene oxide (GO)/silk fibroin (SF) hydrogel-nanocomposite was synthesized. The aim of the research was to fabricate a biocompatible targeted pH-sensitive sustained release carrier, improve the drug loading capacity and enhance the anticancer effect of doxorubicin (DOX) drug. The obtained values for the entrapment (%EE) and loading efficacy (%LE) were 87.75 ± 0.7 % and 46 ± 1 %, respectively, and these high values were due to the use of GO with a large specific surface area and the electrostatic interaction between the drug and SF. The Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analyses confirmed the presence of all the components in the nanocomposite and the suitable interaction between them. Based on the results of dynamic light scattering analysis (DLS) and zeta potential analysis, the mean size of the carrier particles and its surface charge were 293.7 nm and -102.9 mV, respectively. The high negative charge was caused by the presence of hydroxyl groups in GO and SF and it caused proper stability of the nanocomposite. The spherical core-shell structure with its homogeneous surface was also observed in the field emission scanning electron microscopy (FE-SEM) image. The cumulative release percentage of the nanocarrier reached 95.75 after 96 h and it is higher in the acidic environment at all times. The results of fitting the release data to the kinetic models suggested that the mechanism of release was dissolution-controlled anomalous at pH 7.4 and diffusion-controlled anomalous at pH 5.4. The results of 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay and flow cytometry showed an increase in toxicity on MCF-7 cells and improved apoptotic cell death compared to the free drug. Consequently, the findings of this research introduced and confirmed PEG/GO/SF nanocomposite as an attractive novel drug delivery system for pH-sensitive and sustained delivery of chemotherapeutic agents in biomedicine.

Aligned TiO2 Scaffolds in the Presence of a Galactopyranose Matrix by Sol-Gel Process

In this work, titanium dioxide scaffolds were synthesized. Titanium isopropoxide (IV) was used as a precursor in its formation, using a polymeric network of galactopyranose as a template. The powder sample obtained was evaluated by scanning tunneling microscopy (STM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) analysis, and thermal gravimetric analysis (TGA-DTA). According to the results, it was found that these scaffolds can be successfully synthesized in solution using the sol-gel method. The synthesized scaffolds have diameters from 50 nm with porosity of approximately 0.3-10 nm. Important parameters, such as pH and the concentration of the metallic precursors, were optimized in this solution. The values of maximum average roughness R(max) and roughness value (Ra) were 0.50 and 1.45, respectively. XRD diffraction analysis shows the formation of crystalline phases in the TiO₂ scaffold at 700 °C. The use of biological polymers represents an alternative for the synthesis of new materials at low cost, manipulating the conditions in the production processes and making the proposed system more efficient.

The Entrapment and Concentration of SARS-CoV-2 Particles with Graphene Oxide: An In Vitro Assay

Previous studies have suggested that graphene oxide (GO) has some antiviral capacity against some enveloped viruses, including SARS-CoV-2. Given this background, we wanted to test the in vitro antiviral ability to GO using the viral plaque assay technique. Two-dimensional graphene oxide (GO) nanoparticles were synthesized using the modified Hummers method, varying the oxidation conditions to achieve nanoparticles between 390 and 718 nm. The antiviral activity of GO was evaluated by experimental infection and plaque formation units assay of the SARS-CoV-2 virus in VERO cells using a titrated viral clinical isolate. It was found that GO at concentrations of 400 µg/mL, 100 µg/mL, 40 µg/mL, and 4 µg/mL was not toxic to cell culture and also did not inhibit the infection of VERO cells by SARS-CoV-2. However, it was evident that GO generated a novel virus entrapment phenomenon directly proportional to its concentration in the suspension. Similarly, this effect of GO was maintained in assays performed with the Zika virus. A new application for GO nanoparticles is proposed as part of a system to trap viruses in surgical mask filters, air conditioning equipment filters, and air purifier filters, complemented with the use of viricidal agents that can destroy the trapped viruses, an application of broad interest for human beings.

Scaffold Fabrication Techniques of Biomaterials for Bone Tissue Engineering: A Critical Review

Bone tissue engineering (BTE) is a promising alternative to repair bone defects using biomaterial scaffolds, cells, and growth factors to attain satisfactory outcomes. This review targets the fabrication of bone scaffolds, such as the conventional and electrohydrodynamic techniques, for the treatment of bone defects as an alternative to autograft, allograft, and xenograft sources. Additionally, the modern approaches to fabricating bone constructs by additive manufacturing, injection molding, microsphere-based sintering, and 4D printing techniques, providing a favorable environment for bone regeneration, function, and viability, are thoroughly discussed. The polymers used, fabrication methods, advantages, and limitations in bone tissue engineering application are also emphasized. This review also provides a future outlook regarding the potential of BTE as well as its possibilities in clinical trials.

Eco-friendly method for construction of superhydrophobic graphene-based coating on copper substrate and its corrosion resistance performance

In this work, Ni and Ni-graphene, Ni-G, films were electrodeposited on copper substrate by potentiostatic deposition. To achieve superhydrophobicity, myristic acid, MA, was used to modify the surface of the electrodeposited coatings. The manufactured Ni film modified with myristic acid, Ni-MA, and the Ni-G film modified with myristic acid, Ni-G-MA, show excellent superhydrophobic, SHP, properties with a water contact angle of 159° and 162°, respectively. The surface morphology of the prepared SHP films was investigated using a Scanning Electron Microscope, and the results revealed micro-nano structures in both Ni-MA and Ni-G-MA films. The Fourier Transform Infrared Spectrophotometer data showed that the Ni-MA and Ni-G-MA films were successfully grafted on the copper metal. The Ni-G-MA film possessed higher chemical stability and mechanical abrasion resistance than Ni-MA. The Ni-MA and Ni-G-MA films exhibit long-term durability in the outdoor environment for more than four months. The potentiodynamic polarization and electrochemical impedance spectroscopy results demonstrated that the SHP films on the copper substrate exhibit remarkable corrosion resistance in 0.5 M NaCl.

Generation of Graphene oxide and nano-bioglass based scaffold for Bone tissue regeneration

Nanocomposite biocompatible graphene oxide-based scaffolds Ch-G-NBG-go were successfully fabricated by lyophilization technique. The fabricated nano-biocomposite scaffolds were crosslinked with EDC-NHS to achieve water- stabilized structure. Then, these scaffolds were tested through X-Ray diffraction, Fourier Transform Infrared Spectroscopy, High-Resolution Scanning Electron microscopy, Thermogravimetric analysis and Differential Scanning Colorimetry to analyze their physicochemical properties. The average pore size for Ch-G-NBG-go scaffolds with different concentrations was observed in the range of 120-160μm. After GO incorporation, the reduced weight loss was observed in thermogravimetric analysis, revealing its effect over developed scaffolds. In the Lysozyme -PBS solution, the GO-based scaffolds were found firmly stable at room temperature even after a long duration of 28 days also. However, the degradation rate increased after the 21st day highly in the 90% go based scaffold, yet the water retention capacity improved after GO addition in the Ch-G-NBG scaffolds. The scaffold’s potential for bone tissue engineering was evaluated by MG-63 cell culture. It revealed suitable cell attachment and proliferation of cells compared to the Ch-G-NBG scaffold. ALP activity suggested improved osteogenic differentiation of MG-63 cells over GO scaffolds. Based on these results, the nano-biocomposite scaffold appears to have the potential for utilization in bone tissue restoration, replacement and regeneration.

A Fast Adsorption of Azithromycin on Waste-Product-Derived Graphene Oxide Induced by H-Bonding and Electrostatic Interactions

Graphene oxide (GO) was prepared from the graphite electrode of waste dry cells, and the application of the prepared GO as a potential adsorbent for rapid and effective removal of an antibiotic, azithromycin (AZM), has been investigated. The synthesis process of GO is very simple, cost-effective, and eco-friendly. As-prepared GO is characterized by field-emission scanning electron microscopy, energy-dispersive X-ray, transmission electron microscopy, X-ray diffractometry, Fourier transform infrared spectroscopy, elemental analysis, Brunauer-Emmett-Teller sorptometry, and zeta potential analysis. The obtained GO has been employed for removal of the widely used AZM antibiotic from an aqueous solution. The quantitative analysis of AZM before and after adsorption has been carried out by liquid chromatography tandem mass spectrometry. The adsorption of AZM by GO was performed in a batch of experiments where the effects of adsorbent (GO) dose, solution pH, temperature, and contact time were investigated. Under optimum conditions (pH = 7.0, contact time = 15 min, and adsorbent dose = 0.25 g/L), 98.8% AZM was removed from the aqueous solution. The rapid and effective removal of AZM was significantly controlled by the electrostatic attractions and hydrogen bonding on the surface of GO. Adsorption isotherms of AZM onto GO were fitted well with the Freundlich isotherm model, while the kinetic data were fitted perfectly with the pseudo-second order. Therefore, the simple, cost-effective, and eco-friendly synthesis of GO from waste material could be applicable to fabricate an effective and promising low-cost adsorbent for removal of AZM from aqueous media.

Novel advances in strategies and applications of artificial articular cartilage

Artificial articular cartilage (AC) is extensively applied in the repair and regeneration of cartilage which lacks self-regeneration capacity because of its avascular and low-cellularity nature. With advances in tissue engineering, bioengineering techniques for artificial AC construction have been increasing and maturing gradually. In this review, we elaborated on the advances of biological scaffold technologies in artificial AC including freeze-drying, electrospinning, 3D bioprinting and decellularized, and scaffold-free methods such as self-assembly and cell sheet. In the following, several successful applications of artificial AC built by scaffold and scaffold-free techniques are introduced to demonstrate the clinical application value of artificial AC.

Fabrication And In Vitro Evaluation Of 3D Printed Porous Silicate Substituted Calcium Phosphate Scaffolds For Bone Tissue Engineering

Silicate-substituted calcium phosphate (Si-CaP) ceramics, alternative materials for autogenous bone grafting, exhibit excellent osteoinductivity, osteoconductivity, biocompatibility and biodegradability; thus, they have been widely used for treating bone defects. However, the limited control over the spatial structure and weak mechanical properties of conventional Si-CaP ceramics hinder their wide application. Here, we used digital light processing (DLP) printing technology to fabricate a novel porous 3D printed Si-CaP scaffold to enhance the scaffold properties. Scanning electron microscopy, compression tests, and computational fluid dynamics simulations of the 3D printed Si-CaP scaffolds revealed a uniform spatial structure, appropriate mechanical properties, and effective interior permeability. Furthermore, compared to Si-CaP groups, 3D printed Si-CaP groups exhibited sustained release of silicon (Si), calcium (Ca) and phosphorus (P) ions. Furthermore, 3D printed Si-CaP groups had more comprehensive and persistent osteogenic effects due to increased osteogenic factor expression and calcium deposition. Our results show that the 3D printed Si-CaP scaffold successfully improved bone marrow mesenchymal stem cell (BMSCs) adhesion, proliferation and osteogenic differentiation and possessed a distinct apatite mineralization ability. Overall, with the help of DLP printing technology, Si-CaP ceramic materials facilitate the fabrication of ideal bone tissue engineering scaffolds with essential elements, providing a promising approach for bone regeneration. This article is protected by copyright. All rights reserved.

Superhydrophobic Cobalt–Graphene Composite for the Corrosion Protection of Copper Bipolar Plates in Proton Exchange Membrane Fuel Cells

Superhydrophobic cobalt and cobalt–graphene films were fabricated on copper bipolar plates (BPPs) using potentiostatic electrodeposition to improve their corrosion resistance and surface conductivity. A scanning electron microscope (SEM) was used to study the surface morphology of the prepared superhydrophobic films. The results show that the cobalt film modified by stearic acid (Co-SA) and cobalt–graphene composite modified by stearic acid (Co–G-SA) exhibit micro–nano structures. The results of the Fourier transforming infrared (FTIR) spectrophotometer confirm that the copper substrate was coated by Co-SA and Co–G-SA films. The wettability results of the prepared superhydrophobic films demonstrate that the films display superhydrophobicity, where the fabricated Co-SA and Co–G-SA films have contact angles (CAs) of 159 deg and 165 deg, respectively. Chemical stability, mechanical abrasion resistance, surface conductivity, and corrosion resistance in a simulated proton exchange membrane fuel cells (PEMFCs) environment are significantly higher for copper coated by Co–G-SA film. Because the copper coated with Co–G-SA has a low interfacial contact resistance (ICR) value and a high corrosion resistance, it is thought to be a good choice for PEMFC bipolar plates.

Fabrication of eco-friendly graphene-based superhydrophobic coating on steel substrate and its corrosion resistance, chemical and mechanical stability

Superhydrophobic coatings were successfully fabricated on steel substrates using potentiostatic electrodeposition of Ni and Ni-graphene, Ni-G, coatings followed by immersion in an ethanolic solution of stearic acid, SA. Rice straw, an environmentally friendly biomass resource, was used to synthesize high-quality graphene. The Raman spectra proved the high quality of the produced graphene. The Fourier transform infrared spectroscopy, FTIR, results showed that the Ni coating grafted with stearic acid, Ni-SA, and the Ni-G composite grafted with stearic acid, Ni-G-SA, were successfully deposited on the steel substrate. The scanning electron microscope, SEM, results showed that the prepared superhydrophobic coatings exhibit micro-nano structures. The wettability results revealed that the values of contact angles, CAs, for Ni-SA and Ni-G-SA coatings are 155.7° and 161.4°, while the values of sliding angles, SAs, for both coatings are 4.0° and 1.0°, respectively. The corrosion resistance, chemical stability, and mechanical abrasion resistance of the Ni-G-SA coating were found to be greater than those of the Ni-SA coating.

Corrosion performance of a steel surface modified by a robust graphene-based superhydrophobic film with hierarchical roughness

Potentiostatic deposition of cobalt film and cobalt-graphene, Co-G, composite, followed by modification with low surface energy stearic acid (SA), was used to fabricate superhydrophobic films on a steel substrate successfully. A scanning electron microscope was used to analyze the surface morphology of the prepared superhydrophobic cobalt film modified by stearic acid, Co-SA, and the cobalt-graphene film modified by stearic acid, Co-G-SA. The findings show that both the fabricated films have micro-nanostructures. The Co-G-SA film shows a higher roughness due to the network structures of graphene and so exhibits higher superhydrophobicity. The Fourier transform infrared spectrophotometer, FTIR, results confirm the formation of Co-SA and Co-G-SA films on the steel surface. The wettability of the prepared films shows that they exhibit superhydrophobicity, where the Co-SA and Co-G-SA films have contact angles of 155° and 158°, respectively. The Potentiodynamic polarization results show that the value of the corrosion current density for steel coated with Co-SA (0.7094 µA) is lower than that of bare steel (0.1457 mA), while the coated steel with Co-G-SA film has the lowest value (0.1732 µA). The electrochemical impedance spectroscopy, EIS, results show that the charge transfer resistance for steel coated with Co-SA is 38 times that of bare steel, while steel coated with Co-SA is 57 times that of bare steel. Potentiodynamic polarization and EIS results show that the prepared Co-G-SA film superhydrophobic films exhibit higher corrosion resistance. Co-G-SA film has higher mechanical stability (maintains superhydrophobicity until 900 abrasion cycles), chemical stability (has superhydrophobicity in the pH range 1–13), and long-term stability (retains superhydrophobicity after 30 days in a 0.5 M NaCl solution) in 0.5 M NaCl solution.

Graphene Oxide-Reinforced Alginate Hydrogel for Controlled Release of Local Anesthetics: Synthesis, Characterization, and Release Studies

In pain relief, lidocaine has gained more attention as a local anesthetic. However, there are several side effects that limit the use of local anesthetics. Therefore, it is hypothesized that a hydrogel system with facile design can be used for prolonged release of lidocaine. In this study, we developed a formulation comprises of sodium alginate (SA) and graphene oxide (GO) to prolong the release of lidocaine. The gelation was induced by physically crosslinking the alginate with Ca2+ ions. The formation of blank SA and GO-reinforced SA hydrogels was investigated with different concentration of Ca2+ ions. The controlled release of lidocaine hydrochloride (LH) on both hydrogel systems was studied in PBS solution. The GO-reinforced SA hydrogels exhibited more sustained release than SA hydrogels without GO. In vitro biocompatibility test in L929 fibroblast cells confirmed the non-toxic property of hydrogels. Furthermore, to prove the in-situ gelation and biodegradability of hydrogels the hydrogels were injected on mice model and confirmed the stable gel formation. The hydrogels implanted onto the subcutaneous tissue of hydrogels retained over one week. These results indicate that LH-loaded GO-reinforced SA hydrogel can be a potential biomaterial for controlled release of local anesthetics.

Fabrication and characterization of PHEMA–gelatin scaffold enriched with graphene oxide for bone tissue engineering

Background

Growing investigations demonstrate that graphene oxide (GO) has an undeniable impact on repairing damaged bone tissue. Moreover, it has been stated in the literatures that poly(2-hydroxyethyl methacrylate) (PHEMA) and gelatin could provide a biocompatible structure.

Methods

In this research, we fabricated a scaffold using freeze-drying method comprised of PHEMA and gelatin, combined with GO. The validation of the successful fabrication of the scaffolds was performed utilizing Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction assay (XRD). The microstructure of the scaffolds was observed using scanning electron microscopy (SEM). The structural properties of the scaffolds including mechanical strength, hydrophilicity, electrical conductivity, and degradation rate were also evaluated. Human bone marrow‐derived mesenchymal stem cells (hBM-MSCs) were used to evaluate the cytotoxicity of the prepared scaffolds. The osteogenic potential of the GO-containing scaffolds was studied by measuring the alkaline phosphatase (ALP) activity after 7, 14, and 21 days cell culturing.

Results

SEM assay showed a porous interconnected scaffold with approximate pore size of 50–300 μm, appropriate for bone regeneration. The increase in GO concentration from 0.25 to 0.75% w/v exhibited a significant improvement in scaffolds compressive modulus from 9.03 ± 0.36 to 42.82 ± 1.63 MPa. Conventional four-probe analysis confirmed the electrical conductivity of the scaffolds in the semiconductor range. The degradation rate of the samples appeared to be in compliance with bone healing process. The scaffolds exhibited no cytotoxicity using MTT assay against hBM-MSCs. ALP analysis indicated that the PHEMA–Gel–GO scaffolds could efficiently cause the differentiation of hBM-MSCs into osteoblasts after 21 days, even without the addition of the osteogenic differentiation medium.

Conclusion

Based on the results of this research, it can be stated that the PHEMA–Gel–GO composition is a promising platform for bone tissue engineering.

F-GO/sodium alginate composite hydrogels for tissue regeneration and antitumor applications

Biopolymers have attracted tremendous attention for wound applications. Since sodium alginate is a biopolymer, they offer excellent therapeutic options with long-term drug release and low side effects. To prepare multifunctional composite hydrogels with anticancer and tissue regeneration capabilities, sodium alginate (SA) and graphene oxide (GO) were covalently linked and crosslinked with tetraethyl orthosilicate (TEOS) by the solvothermal method. The structural and morphological results show that the hydrogels exhibit the desired functionality and porosity. The swelling of hydrogels in an aqueous and PBS medium was investigated. SGT-4 had the highest swelling in both aqueous and PBS media. Swelling and biodegradation of the hydrogel were inversely related. The drug release of SGT-4 was determined in different pH media (pH 6.4, 7.4, and 8.4) and the kinetics of drug release was determined according to the Higuchi model (R2 = 0.93587). Antibacterial activities were evaluated against severe infectious agents. Uppsala (U87) and osteoblast (MC3T3-E1) cell lines were used to determine the anticancer and biocompatibility of the composite hydrogels, respectively. These results suggest that the composite hydrogels could be used as wound dressings.

Evaluation and Preparation of a Designed Kartogenin Drug Delivery System (DDS) of Hydrazone-Linkage-Based pH Responsive mPEG-Hz-b-PCL Nanomicelles for Treatment of Osteoarthritis

Osteoarthritis (OA) is a chronic disease caused by the damage of articular cartilage. Kartogenin (KGN) is a well-recognized small molecule which could induce MSCs chondrogenesis and promote cartilage repair treatments. Nano-level micells could be a suitable drug carrier technology for the treatments. In this study, the acid-responsive methoxy poly(ethylene oxide)-hydrazone-poly(ε-caprolactone) copolymers, mPEG-Hz-b-PCL, were synthesized. The structure was characterized by ¹H NMR. The evaluation of a designed kartogenin drug delivery system (DDS) of hydrazone-linkage-based pH responsive mPEG-Hz-b-PCL nanomicelles for treatment of osteoarthritis could be carried out.

Microstructural, functional groups and textural analysis of expanded polyethylene reinforced polystyrene composites with recycled aluminium as ternary component

The aim of this study is to utilise recycled aluminium, expanded polyethylene (EPE) and expanded polystyrene (EPS) to develop a ternary composite. The study was a preliminary investigation into the microstructural, functional groups and textural properties of the novel material. The material was characterised by Fourier Transform Infra-Red Spectroscopy (FTIR), Scanning Electron Microscopy with Energy Dispersive X-ray analysis (SEM-EDX) and Branueur-Emmet-Teller analysis (BET). The shifts in the FTIR peaks for each of the polymer feedstock in comparison with the binary composite indicated chemical interactions between them. For the ternary composites, there were shifting of peaks as the proportion of the aluminium increased in the composites, suggesting the influence of aluminium on the curing process. Beyond 20% Al filler, there were no significant functional group changes in the composite. SEM revealed that an increase in aluminium filler percentage led to better interfacial adhesion and dispersion. BET revealed that the blend of polystyrene and powdered EPE reduces the surface area, while the introduction of the aluminium particles within the range observed increases the surface area of the hybrid composites formed. As the dispersion of aluminium increased, pore volume increased while pore size decreased.

Biomedical applications of chitosan-graphene oxide nanocomposites

Chitosan (CS) and graphene oxide (GO) nanocomposites have received wide attention in biomedical fields due to the synergistic effect between CS which has excellent biological characteristics and GO which owns great physicochemical, mechanical, and optical properties. Nanocomposites based on CS and GO can be fabricated into a variety of forms, such as nanoparticles, hydrogels, scaffolds, films, and nanofibers. Thanks to the ease of functionalization, the performance of these nanocomposites in different forms can be further improved by introducing other functional polymers, nanoparticles, or growth factors. With this background, the current review summarizes the latest developments of CS-GO nanocomposites in different forms and compositions in biomedical applications including drug and biomacromolecules delivery, wound healing, bone tissue engineering, and biosensors. Future improving directions and challenges for clinical practice are proposed as well.

Advancements in Fabrication and Application of Chitosan Composites in Implants and Dentistry: A Review

Chitosan is a biopolymer that is found in nature and is produced from chitin deacetylation. Chitosan has been studied thoroughly for multiple applications with an interdisciplinary approach. Antifungal antibacterial activities, mucoadhesion, non-toxicity, biodegradability, and biocompatibility are some of the unique characteristics of chitosan-based biomaterials. Moreover, chitosan is the only widely-used natural polysaccharide, and it is possible to chemically modify it for different applications and functions. In various fields, chitosan composite and compound manufacturing has acquired much interest in developing several promising products. Chitosan and its derivatives have gained attention universally in biomedical and pharmaceutical industries as a result of their desired characteristics. In the present mini-review, novel methods for preparing chitosan-containing materials for dental and implant engineering applications along with challenges and future perspectives are discussed.

Fabrication of graphene-based porous materials: traditional and emerging approaches

The anisotropic nature of ‘graphenic’ nanosheets enables them to form stable three-dimensional porous materials. The use of these porous structures has been explored in several applications including electronics and batteries, environmental remediation, energy storage, sensors, catalysis, tissue engineering, and many more. As method of fabrication greatly influences the final pore architecture, and chemical and mechanical characteristics and performance of these porous materials, it is essential to identify and address the correlation between property and function. In this review, we report detailed analyses of the different methods of fabricating porous graphene-based structures – with a focus on graphene oxide as the base material – and relate these with the resultant morphologies, mechanical responses, and common applications of use. We discuss the feasibility of the synthesis approaches and relate the GO concentrations used in each methodology against their corresponding pore sizes to identify the areas not explored to date.

Due to their anisotropic nature, graphene nanosheets can be used to form 3-dimensional porous materials using template-free and template-directed methodologies. These fabrication strategies are found to influence the properties of the final structure.

A rational design of NixCoyP@C cocatalyst for enhanced overall water splitting based on g-C3N4 photocatalyst — the synergy of carbon-shell modification and bimetal modulation

Enhanced photocatalytic H2 evolution by bimetal cocatalyst of NiCoP@C.

In situcontrol of graphene oxide dispersions with a small impedance sensor

Carbon-based nanomaterials (CBNs), such as graphene and carbon nanotubes, display advanced physical and chemical properties, which has led to their widespread applications. One of these applications includes the incorporation of CBNs into cementitious materials in the form of aqueous dispersions. The main issue that arises in this context is that currently no established protocol exists as far as characterizing the dispersions. In the present article, an innovative method for quick evaluation and quantification of graphene oxide (GO) dispersions is proposed. The proposed method is electrical impedance spectroscopy (EIS) with an impedance sensor. The novelty lies on the exploitation of a small sensor for on-site (field) direct dielectric measurements with the application of alternating current. Five different concentrations of GO dispersions were studied by applying EIS and for various accumulated ultrasonic energies. The low GO concentration leads to high impedance values due to low formed current network. Two opposing mechanisms were revealed during the accumulation of ultrasonic energy, that are taking place simultaneously: breakage of the agglomerates that facilitates the flow of the electric current due to the formation of a better dispersed network, nevertheless the surface hydrophilic structure of the GO is damaged with the high accumulated ultrasonic energy. The dielectric measurements were exploited to express an appropriate quantitative 'quality index' to facilitate with the dispersion control of the nanostructures. An intermediate concentration of GO is suggested (about 0.15 wt% of the binder materials) to be optimal for the specific engineering application, ultrasonicated at approximately 30 to 65 kJ. The investigated methodology is highly novel and displays a high potential to be applied in-field applications where CBNs must be incorporated in building materials.

Green Synthesized Gold Nanoparticles Using Viola betonicifolia Leaves Extract: Characterization, Antimicrobial, Antioxidant, and Cytobiocompatible Activities

Introduction

Viola betonicifolia is a rich source of numerous secondary metabolites, such as alkaloids, flavonoids, tannins, phenolic compounds, saponins, triterpenoids, and so on, that are biologically active towards different potential biomedical applications. To broaden the potential use of Viola betonicifolia in the realm of bionanotechnology, we investigated the plant's ability to synthesize gold nanoparticles (Au NPs) in a green and efficient manner for the very first time.

Methods

The gold nanoparticles (VB-Au NPs) were synthesized using the leaves extract of Viola betonicifolia, in which plant's secondary metabolites function as both reducing and capping agents. The VB-Au NPs were successfully characterized with spectroscopic techniques. The antimicrobial properties of the VB-Au NPs were further explored against bacterial and mycological species. Additionally, their antioxidant, cytotoxic, and cytobiocompatibility properties were examined in vitro against linoleic acid peroxidation, MCF-7 cancer cells, and human mesenchymal stem cells (hMSCs), respectively.

Results

Results demonstrated that VB-Au NPs presented excellent antibacterial, antifungal, and biofilm inhibition performance against all the tested microbial species compared to plant leaves extract and commercially purchased chemically synthesized gold NPs (CH-Au NPs). Moreover, they also exhibited significant antioxidant potential, comparable to the external standard. The VB-Au NPs displayed good cytobiocompatibility with hMSCs and demonstrated excellent cytotoxic potential against MCF-7 cancer cells compared to CH-Au NPs. The current work presents a green method for synthesizing VB-Au NPs with enhanced antioxidant, antimicrobial, cytotoxic and biofilm inhibition efficacy compared to CH-Au NPs might be attributed to the synergistic effect of the nanoparticle's physical properties and the adsorbed biologically active phytomolecules from the plant leaves extract on their surface.

Conclusion

Thus, our study establishes a novel ecologically acceptable route for nanomaterials' fabrication with increased and/or extra medicinal functions derived from their herbal origins.

Nanocomposites of Chitosan/Graphene Oxide/Titanium Dioxide Nanoparticles/Blackberry Waste Extract as Potential Bone Substitutes

New technologies based on nanocomposites of biopolymers and nanoparticles inspired by the nature of bone structure have accelerated their application in regenerative medicine, thanks to the introduction of reinforcing properties. Our research incorporated chitosan (CS) covalently crosslinked with glutaraldehyde (GLA) beads with graphene oxide (GO) nanosheets, titanium dioxide nanoparticles (TiO₂), and blackberry processing waste extract (BBE) and evaluated them as partial bone substitutes. Skullbone defects in biomodels filled with the scaffolds showed evidence through light microscopy, scanning electron microscopy, histological studies, soft tissue development with hair recovery, and absence of necrotic areas or aggressive infectious response of the immune system after 90 days of implantation. More interestingly, newly formed bone was evidenced by elemental analysis and Masson trichromacy analysis, which demonstrated a possible osteoinductive effect from the beads using the critical size defect experimental design in the biomodels. The results of this research are auspicious for the development of bone substitutes and evidence that the technologies for tissue regeneration, including chitosan nanocomposites, are beneficial for the adhesion and proliferation of bone cells.

Dataset on in-vitro study of chitosan-graphene oxide films for regenerative medicine

Chitosan (CS) is well-known for its biological properties, especially its ability to induce tissue cicatrization. However, considerable research proved that CS presents a high inflammatory response and poor mechanical properties. For these reasons, we decided to use chitosan (CS) functionalized GO by a covalent bond (CS-GO). Due to the resistant structure of the GO and the high presence of oxygen functional groups on it, it will enhance the biocompatibility of the material. The data obtained in this investigation aimed to prove the possible application of CS-GO in regenerative medicine. For this reason, it was performed an In vitro analysis using brine shrimp to prove materials biocompatibility and gingival fibroblasts for a cell growth test.

Inflammatory Modulation of Polyethylene Glycol-AuNP for Regulation of the Neural Differentiation Capacity of Mesenchymal Stem Cells

A nanocomposite composed of polyethylene glycol (PEG) incorporated with various concentrations (~17.4, ~43.5, ~174 ppm) of gold nanoparticles (Au) was created to investigate its biocompatibility and biological performance in vitro and in vivo. First, surface topography and chemical composition was determined through UV-visible spectroscopy (UV-Vis), Fourier-transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), scanning electron microscopy (SEM), free radical scavenging ability, and water contact angle measurement. Additionally, the diameters of the PEG-Au nanocomposites were also evaluated through dynamic light scattering (DLS) assay. According to the results, PEG containing 43.5 ppm of Au demonstrated superior biocompatibility and biological properties for mesenchymal stem cells (MSCs), as well as superior osteogenic differentiation, adipocyte differentiation, and, particularly, neuronal differentiation. Indeed, PEG-Au 43.5 ppm induced better cell adhesion, proliferation and migration in MSCs. The higher expression of the SDF-1α/CXCR4 axis may be associated with MMPs activation and may have also promoted the differentiation capacity of MSCs. Moreover, it also prevented MSCs from apoptosis and inhibited macrophage and platelet activation, as well as reactive oxygen species (ROS) generation. Furthermore, the anti-inflammatory, biocompatibility, and endothelialization capacity of PEG-Au was measured in a rat model. After implanting the nanocomposites into rats subcutaneously for 4 weeks, PEG-Au 43.5 ppm was able to enhance the anti-immune response through inhibiting CD86 expression (M1 polarization), while also reducing leukocyte infiltration (CD45). Moreover, PEG-Au 43.5 ppm facilitated CD31 expression and anti-fibrosis ability. Above all, the PEG-Au nanocomposite was evidenced to strengthen the differentiation of MSCs into various cells, including fat, vessel, and bone tissue and, particularly, nerve cells. This research has elucidated that PEG combined with the appropriate amount of Au nanoparticles could become a potential biomaterial able to cooperate with MSCs for tissue regeneration engineering.

Characteristics and Preparation of Designed Alginate-Based Composite Scaffold Membranes with Decellularized Fibrous Micro-Scaffold Structures from Porcine Skin

Alginate-based composite scaffold membranes with various ratios of decellularized extracellular matrices could be designed and obtained from porcine skin tissue by using supercritical carbon dioxide fluid technology. Retention of decellularized extracellular matrix (dECM) and scaffold-structure integrity was observed. This work provides a simple and time-saving process for the preparation of biomedical alginate-based composite scaffold membranes with fibrous dECM micro-scaffolds, which were further characterized by Fourier transform infrared spectroscopy (FTIR), thermo-gravimetric analysis (TGA), and scanning electron microscope (SEM). The introduction of fibrous dECM micro-scaffolds enhanced the thermal stability and provided expected effects on the biological properties of the designed composite scaffold membranes in regenerative applications.

Solution-Based Processing for Scaffold Fabrication in Tissue Engineering Applications: A Brief Review

The fabrication of 3D scaffolds is under wide investigation in tissue engineering (TE) because of its incessant development of new advanced technologies and the improvement of traditional processes. Currently, scientific and clinical research focuses on scaffold characterization to restore the function of missing or damaged tissues. A key for suitable scaffold production is the guarantee of an interconnected porous structure that allows the cells to grow as in native tissue. The fabrication techniques should meet the appropriate requirements, including feasible reproducibility and time- and cost-effective assets. This is necessary for easy processability, which is associated with the large range of biomaterials supporting the use of fabrication technologies. This paper presents a review of scaffold fabrication methods starting from polymer solutions that provide highly porous structures under controlled process parameters. In this review, general information of solution-based technologies, including freeze-drying, thermally or diffusion induced phase separation (TIPS or DIPS), and electrospinning, are presented, along with an overview of their technological strategies and applications. Furthermore, the differences in the fabricated constructs in terms of pore size and distribution, porosity, morphology, and mechanical and biological properties, are clarified and critically reviewed. Then, the combination of these techniques for obtaining scaffolds is described, offering the advantages of mimicking the unique architecture of tissues and organs that are intrinsically difficult to design.

Synthesis and fabrication of films including graphene oxide functionalized with chitosan for regenerative medicine applications

Graphene oxide (GO) has recently gained attention as a scaffold reinforcing agent for tissue engineering. Biomechanical and biological properties through a synergistic effect can be strengthened when combined with other materials such as chitosan (CS). For that reason, chitosan was used for Graphene Oxide (GO) functionalization through an amide group whose formation was evident by bands around 1600 cm⁻¹ in the FTIR analysis. Furthermore, bands located at 1348 cm⁻¹ (D band), 1593 cm⁻¹ (G band), and 2416 cm⁻¹ (2D band) in the RAMAN spectrum, and the displacement of the signal at 87.03 ppm (C5) in solid-state ¹³C-NMR confirmed the amide formation. Films including the CS-GO compound were prepared and characterized by thermogravimetric analysis (TGA), where CS-GO film presented a lighter mass loss (~10% less loosed) than CS due probably to the covalent functionalization with GO, providing film thermal resistance. The CS-GO films synthesized were implanted in Wistar rats' subdermal tissue as a first approximation to the biological response. In vivo tests showed a low inflammatory response, good cicatrization, and advanced resorption at 60 days of implantation, as indicated by histological images. It was evidenced that the covalent union between CS and GO increased biocompatibility and the degradation/resorption capacity, demonstrating tissue regeneration with typical characteristics and tiny remnants of implanted material surrounded by a type III collagen capsule. These results show the potential application of the new synthesized films, including the CS-GO compound, in tissue engineering.

In situ formation of nanocomposite double-network hydrogels with shear-thinning and self-healing properties

Nanocomposite double-network hydrogels (ncDN hydrogels) are recently introduced to address the limitations of traditional DN hydrogels, such as the lack of diversity in the network structure and the restricted functionalities. However, two challenges remain, including the time-consuming preparation and the lack of shear-thinning and self-healing properties. Here, our approach to developing versatile ncDN hydrogels is through the use of multiple interfacial crosslinking chemistries (i.e., noncovalent interactions of electrostatic interaction and hydrogen bonds as well as dynamic covalent interactions of imine bonds and boronate ester bonds) and surface functionalized nanomaterials (i.e. phenylboronic acid modified reduced graphene oxide (PBA-rGO)). PBA-rGO was used as a multivalent gelator to further crosslink the two polymer chains (i.e. triethylene glycol-grafted chitosan (TEG-CS) and polydextran aldehyde (PDA)) in DN hydrogels, forming the TEG-CS/PDA/PBA-rGO ncDN hydrogels in seconds. The microstructures (i.e. pore size) and properties (i.e. rheological, mechanical, and swelling properties) of the ncDN hydrogels can be simply modulated by changing the amount of PBA-rGO. The dynamic bonds in the polymeric network provided the shear-thinning and self-healing properties to the ncDN hydrogels, allowing the hydrogels to be injected and molded into varied shapes as well as self-repair the damaged structure. Besides, the designed TEG-CS/PDA/PBA-rGO ncDN hydrogels were cytocompatible and also exhibited antibacterial activity. Taken together, we hereby provide a nanomaterial approach to fabricate a new class of ncDN hydrogels with tailorable networks and favorite properties for specific applications.

Chitosan-Based Biomimetically Mineralized Composite Materials in Human Hard Tissue Repair

Chitosan is a natural, biodegradable cationic polysaccharide, which has a similar chemical structure and similar biological behaviors to the components of the extracellular matrix in the biomineralization process of teeth or bone. Its excellent biocompatibility, biodegradability, and polyelectrolyte action make it a suitable organic template, which, combined with biomimetic mineralization technology, can be used to develop organic-inorganic composite materials for hard tissue repair. In recent years, various chitosan-based biomimetic organic-inorganic composite materials have been applied in the field of bone tissue engineering and enamel or dentin biomimetic repair in different forms (hydrogels, fibers, porous scaffolds, microspheres, etc.), and the inorganic components of the composites are usually biogenic minerals, such as hydroxyapatite, other calcium phosphate phases, or silica. These composites have good mechanical properties, biocompatibility, bioactivity, osteogenic potential, and other biological properties and are thus considered as promising novel materials for repairing the defects of hard tissue. This review is mainly focused on the properties and preparations of biomimetically mineralized composite materials using chitosan as an organic template, and the current application of various chitosan-based biomimetically mineralized composite materials in bone tissue engineering and dental hard tissue repair is summarized.