Mechanochemical Catalytic Transfer Hydrogenation of Aromatic Nitro Derivatives

Synthesis, X-ray structure and anticancer activity evaluation of a binuclear La(III) complex with anthranilic acid

A binuclear La(III) complex {[La2(HA)4(H2O)4(C2H5OH)2Cl2]Cl4 (C1)} with 2-aminobenzoic acid (HA) was prepared from the ligand and heptahydrated lanthanum chloride. The complex was characterised by X-ray crystallography that revealed anti-prismatic geometry around both of the lanthanum. In the complex, the four 2-aminobenzoic acid ligands are zwitter ionic and the two lanthanum(III) ions net charge is only counterbalanced by chloride ions. The complex cytotoxicity was determined against human breast (MDA-MB-231), prostate (PC-3) and bladder (T-24) cancer cells. This complex afforded cytotoxicity towards the T-24 bladder cancer cells with an IC50 value of 383.5 µg/mL (319 µM). In contrary, activities by the lanthanum complex with IC50 values of 1124 µg/mL (934 µM) and 739 µg/mL (614 µM) were, respectively, shown against the MDA-MB-231 and PC-3 cancer cells. This means the complex is more cytotoxic against the T-24 cells, despite that its activity is less compared with activities shown by classical drugs.

Synthesis, Solid State Structure, and Cytotoxic Activity of a Complex Dimer of Yttrium with Anthranilic Acid against Cancer Cells

This paper presents the synthesis and isolation of a new binuclear complex of yttrium with anthranilic acid (HA). The complex [Y2(HA)6(H2O)4] Cl6.2C2H5OH (C1) was obtained as single crystals that its X-ray analysis revealed its triclinic P-1 space group in addition to anti-prismatic geometry around each of the yttrium ions. In the complex, the anthranilic acid ligands are bidentate, zwitter ionic and neutral, and the yttrium ions' charge is only compensated by six chloride ions. The cytotoxicity of this complex against human breast cancer MDA-MB-231 cells, prostate cancer PC-3 cells, and bladder cancer T-24 cells was evaluated. This yttrium complex displayed more cytotoxic activity against the bladder cancer cells with an IC50 value of 307.7 μg/ml (223 μM). On the other hand, the activities of complex C1 against the MDA-MB-231 and PC-3 cells were less significant respectively with IC50 values of 1097 μg/ml (796 μM) and 921 μg/ml (669 μM).

Recent applications of mechanochemistry in synthetic organic chemistry

The promotion of chemical reactions by an unconventional energy source, mechanical energy (mechanochemistry) has increasing number of applications in organic synthesis. The advantages of mechanochemistry are versatile, from reduction of solvent use, increase of reaction efficiency to better environmental sustainability. This paper gives a short review on the recent developments in the fast growing field of organic mechanochemistry which are illustrated by selected examples.

Cu(II)-Catalyzed Multicomponent Reaction of Pyridine Derivatives/Isoquinolines with Iodonium Ylide and 1,4-Quinones Using Mechanochemistry

An efficient copper-catalyzed solvent-free multicomponent reaction for pyridine derivatives, iodonium ylides, and 1,4-quinones is developed via a room-temperature ball milling technique. The reported protocol provides a sustainable synthesis of isoindolo[2,1-a]pyridine/isoquinoline class of molecules in good to excellent yield in a mixer mill (RETSCH MM400) engaging the commercially available copper acetate (Cu(OAc)₂) as a catalyst without the use of organic solvents. It tolerates a myriad of electron-rich and electron-deficient functionalities on the pyridine moiety. The scalability of the protocol was illustrated by successfully performing the reaction in the gram scale. The photoluminescence and related cellular study revealed that these can be used as a fluorescent chromophore-based cellular probe. A clean reaction profile and a facile experimental setup that is devoid of anhydrous reaction conditions and toxic organic solvents have established the advantages of this strategy over the reported process.

Complementarity of solution and solid state mechanochemical reaction conditions demonstrated by 1,2-debromination of tricyclic imides

The solution phase 1,2-debromination of polycyclic imides using the Zn/Ag couple was successfully transferred to solid state mechanochemical conditions. The Zn/Ag couple was replaced by the Zn/Cu couple which was prepared without any metal activation by in situ ball milling of zinc and copper dusts. The advantage of the ball milling process is that the whole procedure is operationally very simplified. The reactive alkene generated was trapped in situ by several dienes and the respective Diels-Alder cycloadducts were obtained. It was demonstrated that mechanochemical milling offers complementary conditions to solution (thermal) reaction by allowing chemical transformations to proceed which were not possible in solution and vice versa.

Transfer hydrogenation of nitroarenes using cellulose filter paper-supported Pd/C by filtration as well as sealed methods

A reductive filter paper for selective nitro reduction has been prepared by modification of a pristine cellulose filter paper by Pd/C nanoparticles, as a portable catalyst. The reaction was performed in two different set-ups including (i) filtration and (ii) sealed systems, in the presence of ammonium formate and ex situ generated hydrogen gas reducing agents, respectively. In the sealed system in the presence of H2 gas, the halogenated nitroarenes were completely reduced, while in the filtration system, different derivatives of the nitroarenes were selectively reduced to aryl amines. In both systems, the reduction of nitroarenes to aryl amines was performed with high efficiency and selectivity, comparable to a heterogeneous system. Reaction parameters were comprehensively designed using Design Expert software and then studied. The properties of the catalytic filter paper were studied in detail from the points of view of swellability, shrinkage, reusability, and stability against acidic, alkaline, and oxidative reagents.

Nano Ag/AgCl wires-photocatalyzed hydrogen production and transfer hydrogenation of Knoevenagel-type products

An investigation of the relationship between the morphology of Ag/AgCl nanostructured composites with their catalytic performance has been reported.

Ammonium Formate-Pd/C as a New Reducing System for 1,2,4-Oxadiazoles. Synthesis of Guanidine Derivatives and Reductive Rearrangement to Quinazolin-4-Ones with Potential Anti-Diabetic Activity

1,2,4-Oxadiazole is a heterocycle with wide reactivity and many useful applications. The reactive O-N bond is usually reduced using molecular hydrogen to obtain amidine derivatives. NH4CO2H-Pd/C is here demonstrated as a new system for the O-N reduction, allowing us to obtain differently substituted acylamidine, acylguanidine and diacylguanidine derivatives. The proposed system is also effective for the achievement of a reductive rearrangement of 5-(2'-aminophenyl)-1,2,4-oxadiazoles into 1-alkylquinazolin-4(1H)-ones. The alkaloid glycosine was also obtained with this method. The obtained compounds were preliminarily tested for their biological activity in terms of their cytotoxicity, induced oxidative stress, α-glucosidase and DPP4 inhibition, showing potential application as anti-diabetics.

In Situ Stabilisation of Silver Nanoparticles at Chitosan-Functionalised Graphene Oxide for Reduction of 2,4-Dinitrophenol in Water

This investigation reports the in situ growth of silver nanoparticles onto covalently bonded graphene oxide-chitosan, which serve as supported nanocatalysts for the NaBH4 reduction of 2,4-dinitrophenol in aqueous systems. Fumaryl chloride reacted with chitosan in an acidic environment to yield a tailored polymeric material. The latter was, in turn, treated with the pre-synthesised graphene oxide sheets under acidic conditions to generate the GO-functionalised membrane (GO-FL-CS). The adsorption of Ag+ from aqueous media by GO-FL-CS yielded a set of membranes that were decorated with silver nanoparticles (Ag NPs@GO-FL-CS) without any reducing agent. Various analytical tools were used to characterise these composites, including Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller surface area analysis, X-ray diffraction, scanning electron microscopy/energy-dispersive X-ray analysis, inductively coupled plasma-mass spectrometry, and transmission electron microscopy. The silver-loaded materials were further used for the remediation of 2,4-dinitrophenol from aqueous solutions under batch operation. The BET analysis revealed that the functionalisation of GO with chitosan and Ag NPs (average size 20-60 nm) resulted in a three-fold increased surface area. The optimised catalyst (Ag mass loading 16.95%) displayed remarkable activity with an apparent pseudo-first-order rate constant of 13.5 × 10-3 min-1. The cyclic voltammetry experiment was conducted to determine the nitro-conversion pathway. The reusability/stability test showed no significant reduction efficiency of this metal-laden composite over six cycles. Findings from the study revealed that Ag NPs@GO-FL-CS could be employed as a low-cost and recyclable catalyst to convert toxic nitroaromatics in wastewater.

Mechanochemistry for sustainable and efficient dehydrogenation/hydrogenation

Hydrogenation and dehydrogenation reactions are one of the pillars of the chemical industry, with applications from bulk chemicals to pharmaceuticals manufacturing. The ability to selectively add hydrogen across double and (or) triple bonds is key in the chemist’s toolbox and the enabling component in the development of sustainable processes. Traditional solution-based approaches to these reactions are tainted by significant consumption of energy and production of solvent waste. This review highlights the development and applications of recently emerged solvent-free approaches to conduct the hydrogenation of organic molecules using mechanochemistry, i.e., chemical transformations induced or sustained by mechanical force. In particular, we will show mechanochemical techniques such as ball-milling enabled catalytic or stoichiometric metal-mediated hydrogenation and dehydrogenation reactions that are simple, fast, and conducted under significantly milder conditions compared with traditional solution routes. Importantly, we highlight the current challenges and opportunities in this field, while also identifying exciting cases in which mechanochemical hydrogenation strategies lead to new, unique targets and reactivity.

Highly Efficient Solid-State Hydrolysis of Waste Polyethylene Terephthalate by Mechanochemical Milling and Vapor-Assisted Aging

Despite significant methodological and technological advancements in chemical recycling of synthetic polymers, an efficient and quantitative conversion of post-consumer polyethylene terephthalate (PET) into terephthalic acid (TPA) under ambient conditions of temperature and pressure still remains a challenge. In this respect, the application of mechanochemistry and multiple advantages offered by solid-state ball milling and vapor-assisted aging have remained insufficiently explored. To further expand their potential, the implementation of organic solvent-free milling as a superior methodology for successful alkaline depolymerization of waste PET (e. g., bottles and textile) into TPA monomer in near-quantitative yields was reported herein. The solid-state alkaline PET hydrolysis was also shown to proceed in excellent yields under aging conditions in humid environment or in the presence of alcohol vapors. Moreover, the performance of mechanochemical ball milling and aging in the gram-scale depolymerization of PET into TPA was demonstrated.

Green synthesis of fluorescent Schiff bases: chemo-photophysical characterization, X-ray structures, and their bioimaging

Two Schiff bases have been prepared by mechano- and ultrasound-assisted synthesis and their structures were elucidated by X-ray diffraction. One of them showed good fluorescent cell staining in vitro and low cytotoxicity.

Mechanochemical P-derivatization of 1,3,5-Triaza-7-Phosphaadamantane (PTA) and Silver-Based Coordination Polymers Obtained from the Resulting Phosphabetaines

We have described earlier that in aqueous solutions, the reaction of 1,3,5-triaza-7-phosphaadamantane (PTA) with maleic acid yielded a phosphonium-alkanoate zwitterion. The same reaction with 2-methylmaleic acid (citraconic acid) proceeded much slower. It is reported here, that in the case of glutaconic and itaconic acids (constitutional isomers of citraconic acid), formation of the corresponding phosphabetaines requires significantly shorter reaction times. The new phosphabetaines were isolated and characterized by elemental analysis, multinuclear NMR spectroscopy and ESI-MS spectrometry. Furthermore, their molecular structures in the solid state were determined by single crystal X-ray diffraction (SC-XRD). Synthesis of the phosphabetaines from PTA and unsaturated dicarboxylic acids was also carried out mechanochemically with the use of a planetary ball mill, and the characteristics of the syntheses in solvent and under solvent-free conditions were compared. In aqueous solutions, the reaction of the new phosphabetaines with Ag(CF3SO3) yielded Ag(I)-based coordination polymers. According to the SC-XRD results, in these polymers the Ag(I)-ion coordinates to the N and O donor atoms of the ligands; however, Ag(I)-Ag(I) interactions were also identified. The Ag(I)-based coordination polymer (CP1.2) formed with the glutaconyl derivative of PTA (1) showed considerable antimicrobial activity against both Gram-negative and Gram-positive bacteria and yeast strains.

Direct Mechanocatalysis: Using Milling Balls as Catalysts

Direct mechanocatalysis describes catalytic reactions under the involvement of mechanical energy with the distinct feature of milling equipment itself being the catalyst. This novel type of catalysis features no solubility challenges of the catalysts nor the substrate and on top offering most facile way of separation.

On-Demand, Ultraselective Hydrogenation System Enabled by Precisely Modulated Pd-Cd Nanocubes

The pursuit of efficient hydrogenation nanocatalysts with a desirable selectivity toward intricate substrates is state-of-the-art research but remains a formidable challenge. Herein, we report a series of novel PdCd_x nanocubes (NCs) for ultraselective hydrogenation reactions with flexible tuning features. Obtaining a desirable conversion level of the substrates (e.g., 4-nitrophenylacetylene (NPA), 4-nitrobenzaldehyde (NBAD), and 4-nitrostyrene (NS)) and competitive selectivity for all potential hydrogenation products have been achieved one by one under optimized hydrogenation conditions. The performance of these PdCd_x NCs displays an evident dependence on both the composition and the use of Cd and a need for a distinct hydrogen source (H₂ or HCOONH₄). Additionally, for the selectivity of hydrogen to be suitably high, the morphology of the NCs has a very well-defined effect. Density functional theory calculations confirmed the variation of adsorption energy for the substrate and hydrogenation products by carefully controlled introduction of Cd, leading to a desirable level of selectivity for all potential hydrogenation products. The PdCd_x NCs also exhibit excellent reusability with negligible activity/selectivity decay and structural/composition changes after consecutive reactions. The present study provides an advanced strategy for the rational design of superior hydrogenation nanocatalysts to achieve a practical application for desirable and selective hydrogenation reaction efficiency.

Michael Addition Reaction Catalyzed by Imidazolium Chloride to Protect Amino Groups and Construct Medium Ring Heterocycles

An effective approach for amino protection and construction of a seven-membered ring has been developed. The method uses imidazolium chloride to carry out the Michael addition reaction at low temperatures and perform amino deprotection or construction of a seven-membered ring at high temperatures.

Mechanochemical Friedel-Crafts acylations

Friedel–Crafts (FC) acylation reactions were exploited in the preparation of ketone-functionalized aromatics. Environmentally more friendly, solvent-free mechanochemical reaction conditions of this industrially important reaction were developed. Reaction parameters such as FC catalyst, time, ratio of reagents and milling support were studied to establish the optimal reaction conditions. The scope of the reaction was explored by employment of different aromatic hydrocarbons in conjunction with anhydrides and acylation reagents. It was shown that certain FC-reactive aromatics could be effectively functionalized by FC acylations carried out under ball-milling conditions without the presence of a solvent. The reaction mechanism was studied by in situ Raman and ex situ IR spectroscopy.

A solvent-free mechanochemical synthesis of polyaromatic hydrocarbon derivatives

Polyaromatic hydrocarbons are central molecules in the future of nanotechnology. However, the synthesis of these molecules is limited by their lack of solubility in solvents, especially green solvents, their ease of oxidation in solution and use of harmful reagents. Solvent-free mechanochemistry has been shown to have excellent potential for these types of molecules and should provide a much more environmentally benign approach for the synthesis of this very important class of molecules. This report details the use of mechanochemistry on an iterative strategy for the synthesis of polyaromatic hydrocarbon derivatives.

A solvent-free use of mechanochemistry on an iterative strategy for the synthesis of polyaromatic hydrocarbon derivatives.