CALB Immobilized onto Magnetic Nanoparticles for Efficient Kinetic Resolution of Racemic Secondary Alcohols: Long-Term Stability and Reusability

Encapsulation of Candida antarctica lipase B in metal-organic framework under ultrasound and using it to one-pot synthesis of 1,3,4,5-tetrasubstituted pyrazoles

Encapsulating the enzyme in metal-organic frameworks (MOFs) is a convenient method to prepare MOF-enzyme biocomposite. In this study, Candida antarctica lipase B (CAL-B) was chosen to immobilize in Cu-BTC MOF under ultrasound irradiation. CAL-B was immobilized in Cu-BTC under ultrasound at 21 kHz and 11.4 W/cm2 and incubation. 98% of CAL-B was immobilized in Cu-BTC with 99 U/mg activity (threefold more active than the free CAL-B). The prepared biocomposite was characterized using FT-IR, XRD, TGA, SEM, EDX, and BET. The thermal and solvent stability of CAL-B@Cu-BTC was investigated. It was found that at a temperature of 55 ℃, CAL-B@Cu-BTC maintains its activity even after 2 h of incubation. Furthermore, in the presence of 20% and 50% concentrations of MeCN, THF, and DMF, CAL-B@Cu-BTC was found to have an activity of over 80%. A prepared biocatalyst was used to synthesize 1,3,4,5-tetrasubstituted pyrazole derivatives (50-75%) in a one-pot vessel, by adding phenyl hydrazine hydrochlorides, benzaldehydes, and dimethyl acetylenedicarboxylate.

One-Pot Synthesis of 1,3,5-Trisubstitued Pyrazoles via Immobilized Thermomyces lanuginosus Lipase (TLL) on a Metal-Organic Framework

A regioselective enzyme-catalyzed system is selected for the synthesis of 1,3,5-trisubstituted pyrazole derivatives by adding phenyl hydrazines, nitroolefins, and benzaldehydes. The reaction is performed in a one-pot vessel with a yield ranging from 49 to 90%. TLL@MMI, immobilized Thermomyces lanuginosus lipase (TLL) on a multivariate of MOF-5/IRMOF-3 (MMI), showed good performance for the catalysis of this reaction. The prepared biocatalyst was characterized by FTIR, XRD, SEM, and EDX. The thermal and solvent stability of TLL@MMI was investigated in MeOH and EtOH after 24 h incubation. In the presence of 100% concentrations of EtOH, TLL@MMI has 80% activity.

Immobilization of Lipase B from Candida antarctica on Magnetic Nanoparticles Enhances Its Selectivity in Kinetic Resolutions of Chiral Amines with Several Acylating Agents

In lipase-catalyzed kinetic resolutions (KRs), the choice of immobilization support and acylating agents (AAs) is crucial. Lipase B from Candida antarctica immobilized onto magnetic nanoparticles (CaLB-MNPs) has been successfully used for diverse KRs of racemic compounds, but there is a lack of studies of the utilization of this potent biocatalyst in the KR of chiral amines, important pharmaceutical building blocks. Therefore, in this work, several racemic amines (heptane-2-amine, 1-methoxypropan-2-amine, 1-phenylethan-1-amine, and 4-phenylbutan-2-amine, (±)-1a-d, respectively) were studied in batch and continuous-flow mode utilizing different AAs, such as diisopropyl malonate 2A, isopropyl 2-cyanoacetate 2B, and isopropyl 2-ethoxyacetate 2C. The reactions performed with CaLB-MNPs were compared with Novozym 435 (N435) and the results in the literature. CaLB-MNPs were less active than N435, leading to lower conversion, but demonstrated a higher enantiomer selectivity, proving to be a good alternative to the commercial form. Compound 2C resulted in the best balance between conversion and enantiomer selectivity among the acylating agents. CaLB-MNPs proved to be efficient in the KR of chiral amines, having comparable or superior properties to other CaLB forms utilizing porous matrices for immobilization. An additional advantage of using CaLB-MNPs is that the purification and reuse processes are facilitated via magnetic retention/separation. In the continuous-flow mode, the usability and operational stability of CaLB-MNPs were reaffirmed, corroborating with previous studies, and the results overall improve our understanding of this potent biocatalyst and the convenient U-shape reactor used.

Ultra-small magnetic Candida antarctica lipase B nanoreactors for enzyme synthesis of bixin-maltitol ester

Bixin has desirable bioactivities but poor water solubility, which limits its practical applications. Enzymatic transesterification of methyl to alditol groups in bixin by Candida antarctica lipase B (CALB) improves bixin water solubility. Herein, magnetic CALB nanoreactors with diameter of 11.7 nm and CALB layer thickness of 3.5 nm were developed by covalently linking CALB onto silicon covered Fe₃O₄ nanoparticles. The CALB loading capacity in nanoreactors achieved 30%. The Michaelis constant (Km) and maximum reaction rate of magnetic CALB nanoreactors were 56.1 mmol/L and 0.2 mmol/(L·min). Magnetic CALB nanoreactors could circularly catalyze bixin-maltitol ester synthesis and keep catalytic efficiency of 62.6% after eight repetitive enzymatic reactions. Additionally, the optimal bixin-maltitol ester synthesis procedure was heating bixin-maltitol mixture at molar ratio of 1:7 in anhydrous 2-methyl-2-butanol-dimethylsulfoxide (8:2, v/v) at 50 °C for 24 h. Bixin-maltitol ester showed improved water solubility at pH 5.5 and 7.0.

Scalability of U-Shape Magnetic Nanoparticles-Based Microreactor–Lipase-Catalyzed Preparative Scale Kinetic Resolutions of Drug-like Fragments

The production of active pharmaceutical ingredients (APIs) and fine chemicals is accelerating due to the advent of novel microreactors and new materials for immobilizing customized biocatalysts that permit long-term use in continuous-flow reactors. This work studied the scalability of a tunable U-shape magnetic nanoparticles (MNPs)-based microreactor. The reactor consisted of a polytetrafluoroethylene tube (PTFE) of various inner diameters (ID = 0.75 mm, 1.50 mm, or 2.15 mm) and six movable permanent magnets positioned under the tube to create reaction chambers allowing the fluid reaction mixture to flow through and above the enzyme-loaded MNPs anchored by permanent magnets. The microreactors with various tube sizes and MNP capacities were tested with the preparative scale kinetic resolution of the drug-like alcohols 4-(3,4-dihydroisoquinolin-2(1H)-yl)butan-2-ol (±)-1a and 4-(3,4-dihydroquinolin-1(2H)-yl)butan-2-ol (±)-1b, utilizing Lipase B from Candida antarctica immobilized covalently onto MNPs, leading to highly enantioenriched products [(R)-2a,b and (S)-1a,b]. The results in the U-shape MNP flow reactor were compared with reactions in the batch mode with CaLB-MNPs using similar conditions. Of the three different systems, the one with ID = 1.50 mm showed the best balance between the maximum loading capacity of biocatalysts in the reactor and the most effective cross-section area. The results showed that this U-shaped tubular microreactor might be a simple and flexible instrument for many processes in biocatalysis, providing an easy-to-set-up alternative to existing techniques.

High Internal Phase Pickering Emulsion Stabilized by Lipase-Coated ZIF-8 Nanoparticles towards Recyclable Biphasic Biocatalyst

High internal phase Pickering emulsion (Pickering HIPE) stabilized by enzyme-decorated metal-organic frameworks (MOFs) nanoparticles is developed for biphasic biocatalysts to enhance lipase catalysis and recycling. Specifically, enzyme decorated nanoparticles are prepared via ZIF-8 physisorption of a model lipase Candida antarctica Lipase B (CALB), named ZIF-8@CALB, to be both Pickering stabilizer and catalytic sites. An oil-in-water (o/w) Pickering HIPE with oil/water volume ratio of 3 could then be fabricated by homogenizing p-nitrophenyl palmitate (p-NPP) n-heptane solution into the ZIF-8@CALB aqueous dispersion. The biocatalytic hydrolysis of p-NPP is conducted by just standing the biphasic system at room temperature. The Pickering HIPE system achieves a product conversion of up to 48.9% within 0.5 h, whereas the p-NPP n-heptane solution system containing free CALB only achieves a stable product conversion of 6.8% for the same time. Moreover, the ZIF@CALB could be recovered by a simple centrifugation at 800 rpm, and then reused in the next cycle. The hydrolysis equilibrium conversion rate of p-NPP keeps over 40% for all 8 cycles, reflecting the high catalytic efficiency and recyclability of the Pickering HIPE. This study provides a new opportunity in designing Enzyme-MOFs-based Pickering interfacial biocatalyst for practical applications.

Preparation, characterization and stability of cross linked nitrilase aggregates (nitrilase-CLEAs) for hydroxylation of 2-chloroisonicotinonitrile to 2-chloroisonicotinic acid

Nitrilases capable of performing hydroxylation of 2-chloroisonicotinonitrile to 2-chloroisonicotinic acid were screened, and ES-NIT-102 was the best nitrilase for said biotransformation. Nitrilase was immobilized as cross linked enzyme aggregates (nitrilase-CLEAs) by fractional precipitation with iso-propanol, and cross linked with glutaraldehyde. The nitrilase-CLEAs prepared with optimized 35 mM glutaraldehyde for 120 min cross linking time had 82.36 ± 4.45% residual activity, and displayed type-II structural CLEAs formation as confirmed by particle size, SEM, FTIR, and SDS-PAGE analysis. Nitrilase-CLEAs had superior pH and temperature stability, showed a shift in optimal temperature by 5 °C, and retained nearly 1.5 to 1.7 folds activity over free nitrilase at 50 °C and 55 °C after more than 9 h incubation. Nitrilase-CLEAs showed reduced affinity and decreased conversion of substrate as indicated by slightly higher K_m values by 5.19% and reduced V_max by 17%. Furthermore, these nitrilase-CLEAs showed 98% conversion, 94.72 g/L product formation, and 83.30% recovery after 24 h when used for hydroxylation of 2-chloroisonicotinonitrile to 2-chloroisonicotinic acid. Nitrilase-CLEAs were catalytically active for 3 cycles showcasing 81% conversion, 75.53 g/L product formation and 66.42% yield. The recovered product was confirmed by HPLC, FTIR, LC-MS, and ¹H NMR, and displayed > 99% purity.

Intensification of Double Kinetic Resolution of Chiral Amines and Alcohols via Chemoselective Formation of a Carbonate-Enzyme Intermediate

Chiral amines and alcohols are synthons of numerous pharmaceutically-relevant compounds. The previously developed enzymatic kinetic resolution approaches utilize a chiral racemic molecule and achiral acyl donor (or acyl acceptor). Thus, only one enantiodivergent step of the catalytic cycle is engaged, which does not fully exploit the enzyme’s abilities. The first carbonate-mediated example of simultaneous double chemoselective kinetic resolution of chiral amines and alcohols is described. Herein, we established a biocatalytic approach towards four optically-pure compounds (>99% ee, Enantioselectivity: E > 200) via double enzymatic kinetic resolution, engaging chiral organic carbonates as acyl donors. High enantioselectivity was ensured by extraordinary chemoselectivity in lipase-catalyzed formation of unsymmetrical organic carbonates and engaged in a process applicable for the synthesis of enantiopure organic precursors of valuable compounds. This study focused not only on preparative synthesis, but additionally the catalytic mechanism was discussed and the clear impact of this rarely observed carbonate-derived acyl enzyme was shown. The presented protocol is characterized by atom efficiency, acyl donor sustainability, easy acyl group removal, mild reaction conditions, and biocatalyst recyclability, which significantly decreases the cost of the reported process.

Lipase immobilization via cross-linked enzyme aggregates: Problems and prospects - A review

In this review we have focused on the preparation of cross-linked enzyme aggregates (CLEAs) from lipases, as these are among the most used enzyme in bioprocesses. This immobilization method is considered very attractive due to preparation simplicity, non-use of supports and the possibility of using crude enzyme extracts. CLEAs provide lipase stabilization under extreme temperature or pH conditions or in the presence of organic solvents, in addition to preventing enzyme leaching in aqueous medium. However, it presents some problems in the preparation and limitations in their use. The problems in preparation refer mainly to the crosslinking step, and may be solved using an aminated feeder. The problems in handling have been tackled designing magnetic-CLEAs or trapping the CLEAs in particles with better mechanical properties, the substrate diffusion problems has been reduced by producing more porous-CLEAs, etc. The enzyme co-immobilization using combi-CLEAs is also a new tendency. Therefore, this review explores the CLEAs methodology aimed at lipase immobilization and its applications.

Magnetic layered double hydroxide nanosheet as a biomolecular vessel for enzyme immobilization

Magnetic nanoparticle coated with manganese‑aluminum layered double hydroxide (Fe3O4/Mg-Al-CO3-LDH) was prepared and used as porous support for ficin (EC 3.4.22.3) as a model enzyme. Structural characteristics were studied by XRD, FTIR, SEM and light scattering. The quantity of immobilized ficin on the mentioned LDH and non-magnetic LDH was measured and enzyme activity, stability and reusability were compared. Results revealed that the core and shell structure of Fe₃O₄/Mg-Al-CO₃-LDH makes it better dispersion compared to the pristine Mg-Al-CO₃-LDH. Ficin showed strong affinity to absorption of the surface of mentioned LDHs nanosheet especially magnetic LDH, confirmed that the existence of Fe₃O₄ in the core structure of magnetic Fe₃O₄/Mg-Al-CO₃-LDH caused better dispersion of LDH nanocrystal shell compared to pristine LDH moreover, enzyme which immobilized on the magnetic LDH supports, can be recovered by magnetic interaction. The storage stability of free ficin, immobilized ficin on the Mg-Al-CO₃-LDH and Fe₃O₄/Mg-Al-CO₃-LDH during a period of 120 days lost about 75%, 30%, and 20% of their initial activities, respectively.

A lipase-based chiral stationary phase for direct chiral separation in capillary electrochromatography

Candida antarctica lipase B (CALB) is a natural biocatalyst with an intrinsically strong chiral environment and a high degree of enantio-selectivity, which is widely used in the separation of racemates. Here, a facile and efficient covalent immobilization approach was utilized to immobilize CALB onto the capillary inner wall as a novel chiral stationary phase to explore and broaden its application in the direct chiral separation by electrochromatography. The obtained CALB immobilized capillary column was characterized by scanning electron microscopy (SEM), fluorescence imaging and Fourier transform infrared spectroscopy (FT-IR). The enantioseparation property of the CALB immobilized capillary column was confirmed by direct chiral separation of several pairs of monoamine neurotransmitter enantiomers in OT-CEC mode. Outstanding enantioseparation performance for three types of monoamine neurotransmitter enantiomers including epinephrine, norepinephrine and phenylephrine was obtained by the CALB immobilized column. Thanks to the effectiveness of covalent bonding method and the intrinsic stability of CALB, the prepared CALB immobilized capillary columns were quite steady and reproducible. The relative standard deviations for retention times of the enantiomers were as follows: for intra-day (n = 5) runs (≤0.25%), inter-day (n = 3) runs (≤0.72%) and between-columns (n = 3) (≤2.42%). After 90 consecutive runs in CEC mode, the CALB immobilized column still exhibited desirable enantionseparation performance.

Design of novel enzyme biocatalysts for industrial bioprocess: Harnessing the power of protein engineering, high throughput screening and synthetic biology

Biocatalysts have wider applications in various industries. Biocatalysts are generating bigger attention among researchers due to their unique catalytic properties like activity, specificity and stability. However the industrial use of many enzymes is hindered by low catalytic efficiency and stability during industrial processes. Properties of enzymes can be altered by protein engineering. Protein engineers are increasingly study the structure-function characteristics, engineering attributes, design of computational tools for enzyme engineering, and functional screening processes to improve the design and applications of enzymes. The potent and innovative techniques of enzyme engineering deliver outstanding opportunities for tailoring industrially important enzymes for the versatile production of biochemicals. An overview of the current trends in enzyme engineering is explored with important representative examples.

Designing of Nanomaterials-Based Enzymatic Biosensors: Synthesis, Properties, and Applications

Among the many biological entities employed in the development of biosensors, enzymes have attracted the most attention. Nanotechnology has been fostering excellent prospects in the development of enzymatic biosensors, since enzyme immobilization onto conductive nanostructures can improve characteristics that are crucial in biosensor transduction, such as surface-to-volume ratio, signal response, selectivity, sensitivity, conductivity, and biocatalytic activity, among others. These and other advantages of nanomaterial-based enzymatic biosensors are discussed in this work via the compilation of several reports on their applications in different industrial segments. To provide detailed insights into the state of the art of this technology, all the relevant concepts around the topic are discussed, including the properties of enzymes, the mechanisms involved in their immobilization, and the application of different enzyme-derived biosensors and nanomaterials. Finally, there is a discussion around the pressing challenges in this technology, which will be useful for guiding the development of future research in the area.

Preparation of cross-linked enzyme aggregates of lipase from Aspergillus niger: process optimization, characterization, stability, and application for epoxidation of lemongrass oil

Cross-linked enzyme aggregates (CLEAs) of lipase were prepared after fractional precipitation with 40-50% ammonium sulfate and then cross-linking with glutaraldehyde. The process variables for the preparation of lipase-CLEAs such as glutaraldehyde concentration, cross-linking period, and initial pH of medium were optimized. The optimized conditions for the preparation of lipase-CLEAs were 25 mM/80 min/pH 7.0, and 31.62 mM/90 min/pH 6.0 with one factor at a time approach and numerical optimization with central composite design, respectively. Lipase-CLEAs were characterized by particle size analysis, SEM, and FTIR. Cross-linking not only shifted the optimal pH and temperature from 7.0 to 7.5 and 40-45 to 45-50 °C, but also altered the secondary structure. Lipase-CLEAs showed an increase in K_m by 7.70%, and a decrease in V_max by 16.63%. Lipase-CLEAs presented better thermostability than free lipase as evident from thermal inactivation constants (t_1/2, D and E_d value), and thermodynamic parameters (E_d, ΔH°, ΔG°, and ΔS°) in the range of 50-70 °C. Lipase-CLEAs retained more than 65% activity up to four cycles and showed good storage stability for 12 days when stored at 4 ± 2 °C. They were successfully utilized for the epoxidation of lemongrass oil which was confirmed by changes in iodine value, epoxide value, and FTIR spectra.

Immobilized MAS1 Lipase-catalyzed Synthesis of n-3 PUFA-rich Triacylglycerols in Deep Eutectic Solvents

n-3 polyunsaturated fatty acids (PUFA)-rich triacylglycerols (TAG) with many beneficial effects are still difficult to be synthesized efficiently and rapidly by current synthetic techniques. This study reports the fatty acid specificity of immobilized MAS1 lipase and its efficient synthesis of n-3 PUFA-rich TAG by esterification of glycerol with n-3 PUFA in natural deep eutectic solvents (NADES) systems. Immobilized MAS1 lipase showed the highest preference for capric acid [C10:0, the highest specificity constant (1/α)=1] whereas it discriminated strongly against docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA) due to their lowest specificity constants (1/α=0.19 and 0.2). Moreover, the highest n-3 PUFA-rich TAG content (55.8%) with similar n-3 PUFA composition to the substrate was obtained in choline chloride/glycerol (CG) system. There was a 1.38-fold increase of TAG content in CG system compared with that in the solvent-free system. Interestingly, immobilized MAS1 lipase exhibited no regiospecificity in the solvent-free and various NADES systems. Besides, the potential reaction mechanism of immobilized MAS1 lipase-catalyzed esterification of glycerol with n-3 PUFA in NADES systems was described. It was found that the use of NADES as solvents could greatly enhance TAG content, and make it easy to separate the product. These results indicated that immobilized MAS1 lipase is a promising biocatalyst for the efficient synthesis of n-3 PUFA-rich TAG by esterification of glycerol with n-3 PUFA in NADES systems.

Preparation of highly diffusible porous cross-linked lipase B from Candida antarctica conjugates: Advances in mass transfer and application in transesterification of 5-Hydroxymethylfurfural

The present work pronounces the three phase partitioning (TPP)-facilitated preparation of porous cross-linked Candida antarctica lipase B (CaLB) aggregates (pCLEAs) for 5-Hydroxymethylfurfural (HMF) esters synthesis. CLEAs and pCLEAs of CaLB were prepared with eupergit as the support under the optimized conditions of pH 8.0, eupergit/protein ratio of 3.0:1.0, 50 mM cross-linker concentration and 3.3 mg/mL BSA concentration in 4 h. The optimum starch concentration for pCLEAs was 0.20%, m/v. The maximum biocatalytic load was 650 U/g (CLEAs) and 721 U/g (pCLEAs), and the immobilized biocatalysts were stable over a pH range of 6.0-9.0 and temperature range of (40-60)°C. The BET surface area of CLEAs and pCLEAs were 21.3 and 29.1 m²/g, respectively, and the catalytic efficiency of pCLEAs was 2.2-fold higher than that of CLEAs. Subsequently, the pCLEAs of CaLB were utilized for the manufacturing of industrially significant HMF esters. Under the optimized transesterification conditions, HMF conversion with pCLEAs CaLB was 1.41- and 1.25-fold higher than with free and CLEAs CaLB, respectively. The pCLEAs were reused upto 8 consecutive transesterification cycles and the produced HMF esters reduced the surface tension of water from 72 mN/m to 32.6 mN/m, proving its potential application as surface-active compounds.

Tailoring Particle-Enzyme Nanoconjugates for Biocatalysis at the Organic-Organic Interface

Nonaqueous Pickering emulsions (PEs) are a powerful platform for catalysis design, offering both a large interface contact and a preferable environment for water-sensitive synthesis. However, up to now, little progress has been made to incorporate insoluble enzymes into the nonaqueous system for biotransformation. Herein, we present biocatalytically active nonaqueous PEs, stabilized by particle-enzyme nanoconjugates, for the fast transesterification and esterification, and eventually for biodiesel synthesis. Our nanoconjugates are the hybrid biocatalysts tailor-made by loading hydrophilic Candida antarctica lipase B onto hydrophobic silica nanoparticles, resulting in not only catalytically active but highly amphiphilic particles for stabilization of a methanol-decane emulsion. The enzyme activity in these PEs is significantly enhanced, ca. 375-fold higher than in the nonaqueous biphasic control. Moreover, the PEs can be multiply reused without significant loss of enzyme performance. With this proof-of-concept, this system can be expanded for many advanced syntheses using different enzymes in the future.

Properties of immobilized MAS1-H108A lipase and its application in the efficient synthesis of n-3 PUFA-rich triacylglycerols

This study reports the properties of immobilized MAS1-H108A lipase from marine Streptomyces sp. strain W007 on XAD1180 resin and its application in the synthesis of n-3 polyunsaturated fatty acids (PUFA)-rich triacylglycerols (TAG) for the first time. It was found that the optimal temperature and pH for both immobilized MAS1-H108A lipase and free lipase MAS1-H108A were 70 °C and 7.0, respectively. However, immobilized MAS1-H108A lipase exhibited higher thermostability when compared with free lipase MAS1-H108A. It was also interesting that both immobilized MAS1-H108A lipase and free lipase MAS1-H108A showed no regiospecificity in the hydrolysis of triolein. Subsequently, immobilized MAS1-H108A lipase and free lipase MAS1-H108A were employed to catalyze glycerolysis of n-3 PUFA-rich ethyl esters (EE) and esterification of n-3 PUFA with glycerol under vacuum in the solvent-free system. The results showed that n-3 PUFA-rich TAG were synthesized efficiently by non-regiospecific immobilized MAS1-H108A lipase and TAG contents separately reached 92.07% and 76.13% during the esterification and glycerolysis reactions, which were significantly higher than those (71.82% and 39.62%, respectively) obtained by free lipase MAS1-H108A. Besides, TAG exhibited similar n-3 PUFA composition to the substrate. These findings indicated that non-regiospecific immobilized MAS1-H108A lipase is a promising and efficient biocatalyst for the industrial synthesis of n-3 PUFA-rich TAG.

The Use of Ion Liquids as a Trojan Horse Strategy in Enzyme-Catalyzed Biotransformation of (R,S)-Atenolol

The enzymatic method was used for the direct biotransformation of racemic atenolol. The catalytic activities of commercially available lipases from Candida rugosa were tested for the kinetic resolution of (R,S)-atenolol by enantioselective acetylation in various two-phase reaction media containing ionic liquids. The composed catalytic system gave the possibility to easy separate substrates and products of the conducted enantioselective reaction and after specific procedure to reuse utilized enzymes in another catalytic cycle.

Improvement in biochemical characteristics of cross-linked enzyme aggregates (CLEAs) with magnetic nanoparticles as support matrix

Recent developments in novel carriers for enzyme immobilization have led to improvement in the stability and cost-effectiveness of the biocatalysts for their enhanced suitability in the industrial applications. Cross-linked enzyme aggregates (CLEAs), a recent technique developed in the carrier-free type of enzyme immobilization is a simple and straightforward method. Moreover, the magnetic property and the higher surface-to-volume ratio of the maghemite nanoparticles have also been utilized in the present immobilization technique as magnetic nanoparticle-supported CLEAs (Mgnp-CLEAs). The stability studies of the free and immobilized enzyme revealed the Mgnp-CLEAs to have enhanced enzyme stability with an increase in the reusability cycle. The physical characterization of the nanoparticles and immobilized enzymes by the Scanning Electron Microscopy (SEM), Fourier-Transform Infrared spectroscopy (FT-IR) and X-ray diffraction analysis (XRD) showed the successful immobilization of the enzyme for its improved stability.

"Fishing and Hunting"-Selective Immobilization of a Recombinant Phenylalanine Ammonia-Lyase from Fermentation Media

This article overviews the numerous immobilization methods available for various biocatalysts such as whole-cells, cell fragments, lysates or enzymes which do not require preliminary enzyme purification and introduces an advanced approach avoiding the costly and time consuming downstream processes required by immobilization of purified enzyme-based biocatalysts (such as enzyme purification by chromatographic methods and dialysis). Our approach is based on silica shell coated magnetic nanoparticles as solid carriers decorated with mixed functions having either coordinative binding ability (a metal ion complexed by a chelator anchored to the surface) or covalent bond-forming ability (an epoxide attached to the surface via a proper linker) enabling a single operation enrichment and immobilization of a recombinant phenylalanine ammonia-lyase from parsley fused to a polyhistidine affinity tag.

Insight into the Modification of Phosphatidylcholine with n-3 Polyunsaturated Fatty Acids-Rich Ethyl Esters by Immobilized MAS1 Lipase

This study reported the modification of phosphatidylcholine (PC) with n-3 polyunsaturated fatty acids (PUFA)-rich ethyl esters (EE) by immobilized MAS1 lipase-catalyzed transesterification in the solvent-free system. Effects of n-3 PUFA-rich EE/PC mass ratio, enzyme loading, reaction temperature, and water dosage on the incorporation of n-3 PUFA into PC were investigated, respectively. The results indicate that the maximum incorporation of n-3 PUFA into PC reached 33.5% (24 h) under the following conditions: n-3 PUFA-rich EE/PC mass ratio of 6:1, enzyme loading of 20%, reaction temperature of 55 °C, and water dosage of 1.0%. After 72 h of reaction, the incorporation of n-3 PUFA into PC was 43.55% and the composition of the reaction mixture was analyzed by ³¹P nuclear magnetic resonance (NMR). The results show that the reaction product consisted of 32.68% PC, 28.76% 1-diacyl-sn-glycero-3-lysophosphatidylcholine (sn-1 LPC), 4.90% 2-diacyl-sn-glycero-3-lysophosphatidylcholine (sn-2 LPC), and 33.60% sn-glycero-3-phosphatidylcholine (GPC). This study offers insight into the phospholipase activity of immobilized MAS1 lipase and suggests the extended applications of immobilized MAS1 lipase in the modification of phospholipids for industrial purpose.

Enhancing the Thermo-Stability and Anti-Biofilm Activity of Alginate Lyase by Immobilization on Low Molecular Weight Chitosan Nanoparticles

Bacterial biofilm causes severe antibiotic resistance. An extracellular polymeric substance (EPS) is the main component in the bacterial biofilm. Alginate is a key EPS component in the biofilm of Pseudomonas aeruginosa and responsible for surface adhesion and stabilization of biofilm. Alginate lyase has emerged as an efficient therapeutic strategy targeting to degrade the alginate in the biofilm of P. aeruginosa. However, the application of this enzyme is limited by its poor stability. In this study, chitosan nanoparticles (CS-NPs) were synthesized using low molecular weight chitosan and alginate lyase Aly08 was immobilized on low molecular weight chitosan nanoparticles (AL-LMW-CS-NPs). As a result, the immobilization significantly enhanced the thermal stability and reusability of Aly08. In addition, compared with free Aly08, the immobilized AL-LMW-CS-NPs exhibited higher efficiency in inhibiting biofilm formation and interrupting the established mature biofilm of P. aeruginosa, which could reduce its biomass and thickness confirmed by confocal microscopy. Moreover, the biofilm disruption greatly increased the antibiotic sensitivity of P. aeruginosa. This research will contribute to the further development of alginate lyase as an anti-biofilm agent.

Microbial Proteases Applications

The use of chemicals around the globe in different industries has increased tremendously, affecting the health of people. The modern world intends to replace these noxious chemicals with environmental friendly products for the betterment of life on the planet. Establishing enzymatic processes in spite of chemical processes has been a prime objective of scientists. Various enzymes, specifically microbial proteases, are the most essentially used in different corporate sectors, such as textile, detergent, leather, feed, waste, and others. Proteases with respect to physiological and commercial roles hold a pivotal position. As they are performing synthetic and degradative functions, proteases are found ubiquitously, such as in plants, animals, and microbes. Among different producers of proteases, Bacillus sp. are mostly commercially exploited microbes for proteases. Proteases are successfully considered as an alternative to chemicals and an eco-friendly indicator for nature or the surroundings. The evolutionary relationship among acidic, neutral, and alkaline proteases has been analyzed based on their protein sequences, but there remains a lack of information that regulates the diversity in their specificity. Researchers are looking for microbial proteases as they can tolerate harsh conditions, ways to prevent autoproteolytic activity, stability in optimum pH, and substrate specificity. The current review focuses on the comparison among different proteases and the current problems faced during production and application at the industrial level. Deciphering these issues would enable us to promote microbial proteases economically and commercially around the world.