Different Role of Bisulfite/Sulfite in UVC-S(IV)-O2 System for Arsenite Oxidation in Water

New insight into wastewater treatment by activation of sulfite with humic acid under visible light irradiation

Sulfite (S(IV)), as an alternative to persulfate, has demonstrated its cost-effectiveness and environmentally friendly nature, garnering increasing attention in Advanced Oxidation Processes (AOPs). Dissolved organic matter (DOM) commonly occurred in diverse environments and was often regarded as an interfering factor in sulfite-based AOPs. However, less attention has been paid to the promotion of the activation of sulfite by excited DOM, which could produce various reactive intermediates. The study focused on the activation of sulfite using visible light (VL) - excited humic acid (HA) to efficiently degrade many common organic pollutants, which was better than peroxydisulfate (PDS) and peroxymonosulfate (PMS) systems. Quenching experiments and electron paramagnetic resonance (EPR) analysis revealed that the triplet states of HA (3HA*) activated sulfite through energy transfer, resulting in the production of SO4·-, O2·-, and 1O2. The most significant active species found in the degradation of roxarsone (ROX) was 1O2, which was a non-radical pathway and exhibits high selectivity for pollutant degradation. This non-radical pathway was not commonly observed in traditional sulfite-based AOPs. Additionally, the coexistence of various inorganic anions, such as NO3-, Cl-, SO42-, CO32-, and PO43-, had little effect on the degradation of ROX. Furthermore, DOM from different natural water demonstrated efficient activation of S(IV) under light conditions, opening up new possibilities for applying sulfite-based advanced oxidation to the remediation of organic pollution in diverse sites and water bodies. In summary, this research offered promising insights into the potential application of sulfite-based AOPs, facilitated by photo-excited HA, as a new strategy for efficiently degrading organic pollutants in various environmental settings.

Sulfite Poses a Risk of Hexavalent Chromium Rebound in Vadose Zone: A Challenge of the Stability of CrxFe1-x(OH)3

Cr(VI) rebound is the primary risk associated with the reduction remediation of Cr(VI)-contaminated soil. The potential impact of sulfites, which can be produced by microbial activities or originate from sulfur-containing remediation agents, on the Cr(VI) rebound in the vadose zone has been overlooked. When sulfites are present, the stability of CrxFe1-x(OH)3 is compromised and significantly inferior to that of Cr(OH)3, as demonstrated in this paper. First, Fe acts as a catalyst for the conversion of adsorbed sulfite to SO4·-, which subsequently triggers the oxidation of Cr(III) and results in the rebound of Cr(VI). The heterogeneous catalysis by Fe on the surface of CrxFe1-x(OH)3 plays a predominant role, contributing to 78% of the actual oxidation of Cr(III) among all employed catalytic processes. The presence of ambient Cl- can exacerbate the rebound effect of Cr(VI) by promoting the generation of HOCl. Furthermore, a portion of released Cr(VI) was reduced to Cr(III) by dissolved sulfite in the presence of dissolved Fe as a catalyst, thereby increasing the dissolution and migration risk associated with CrxFe1-x(OH)3. Hence, the presence of sulfites results in a significant increase in the Cr(VI) rebound and Cr(III) release from CrxFe1-x(OH)3. This challenges the conventional understanding of the stability of CrxFe1-x(OH)3.

Advanced electrocatalytic redox processes for environmental remediation of halogenated organic water pollutants

Halogenated organic compounds are widespread, and decades of heavy use have resulted in global bioaccumulation and contamination of the environment, including water sources. Here, we introduce the most common halogenated organic water pollutants, their classification by type of halogen (fluorine, chlorine, or bromine), important policies and regulations, main applications, and environmental and human health risks. Remediation techniques are outlined with particular emphasis on carbon-halogen bond strengths. Aqueous advanced redox processes are discussed, highlighting mechanistic details, including electrochemical oxidations and reductions of the water-oxygen system, and thermodynamic potentials, protonation states, and lifetimes of radicals and reactive oxygen species in aqueous electrolytes at different pH conditions. The state of the art of aqueous advanced redox processes for brominated, chlorinated, and fluorinated organic compounds is presented, along with reported mechanisms for aqueous destruction of select PFAS (per- and polyfluoroalkyl substances). Future research directions for aqueous electrocatalytic destruction of organohalogens are identified, emphasizing the crucial need for developing a quantitative mechanistic understanding of degradation pathways, the improvement of analytical detection methods for organohalogens and transient species during advanced redox processes, and the development of new catalysts and processes that are globally scalable.

Treasuring industrial sulfur by-products: A review on add-value to reductive sulfide and sulfite for contaminant removal and hydrogen production

Reductive sulfur-containing by-products (S-BPs) released from industrial process mainly exist in the simple form of sulfide and sulfite. In this study, recent advances to remove and make full use of reductive S-BPs to achieve efficient contaminant removal and hydrogen production are critically reviewed. Sulfide, serves as both reductant and nucleophile, can form intermediates with the catalyst surface functional group through chemical interaction, efficiently promoting the catalytic reduction process to remove contaminants. Sulfite assisted catalytic process could be classified to the advanced reduction processes (ARPs) and advanced oxidation processes (AOPs), mainly depending on the presence of dissolved oxygen (DO) in the solution. During ARPs, sulfite could generate reductive active species including hydrated electron (e_aq^-), hydrogen radical (H·), and sulfite radical (SO₃^•-) under the irradiation of UV light, leading to the efficient reduction removal of a variety of contaminants. During AOPs, sulfite could first produce SO₃^•- under the action of the catalyst or energy, initiating a series of reactions to produce oxysulfur radicals. Various contaminants could be effectively removed under the role of these oxidizing active species. Sulfides and sulfites could also be removed along with promoting hydrogen production via photocatalytic and electrocatalytic processes. Besides, the present limitations and the prospects for future practical applications of the process with these S-BPs are proposed. Overall, this review gives a comprehensive summary and aims to provide new insights and thoughts in promoting contaminant removal and hydrogen production through taking full advantage of reductive S-BPs.

Strengthening arsenite oxidation in water using metal-free ultrasonic activation of sulfite

Although sulfite-based advanced oxidation processes (AOPs) have received renewed attention due to the production of oxysulfur radicals, the feasibility of using ultrasound (US) to activate sulfite remains unknown. In this work, low frequency ultrasound has been applied for the first time to develop a novel sulfite activation process (US-S(IV)) for enhanced oxidation of arsenite (As(III)). Our results showed that the US-S(IV) process with 1 mM sulfite addition and 20 kHz 650 W ultrasound can achieve approximately 2.9-fold increase in As(III) oxidation rate compared to the US process at pH 7. The mechanisms underpinning the US-S(IV) process have been probed through radical-scavenging experiments and electron spin resonance (ESR) spectrometry. Direct ultrasonolysis of sulfite has been demonstrated to be the predominant pathway producing the primary sulfite radical (SO₃⁻) in the US-S(IV) process. Besides, the US-S(IV) process also works well in the treatment process of natural water, suggesting that this process could be promising in commercial scale application. This work not only provides a new application of ultrasound in sulfite-based AOP, but also provides further insights into how sulfite impacts the US process.

Efficient destruction of emerging contaminants in water by UV/S(IV) process with natural reoxygenation: Effect of pH on reactive species

UV/sulfite systems with oxygen have recently been considered as advanced oxidation processes in view of the participation of oxysulfur radicals. However, the contribution of •OH and the efficiency of destructing emerging contaminants (ECs) in water remain largely unclear. Here, the UV/S(IV) process was applied with natural reoxygenation to degrade two typical ECs, diethyl phthalate (DEP) and bisphenol A (BPA) showing different properties. Solution pH played the key role in determining the reactive species, and both DEP and BPA were more favorably degraded at more alkaline conditions with higher utilization efficiency of SO₃^2-. Specifically, the H•, O₂^•-, •OH and SO₃^•- were identified at acidic condition, but the amount of •OH accumulated significantly with the elevation of pH. Competitive quenching experiments showed that e_aq^- and •OH dominated the degradation of DEP and BPA at alkaline condition, respectively. Besides, DEP showed higher quantum efficiency for the indirect photolysis and mineralization degree than that of BPA at pH 9.2 mainly due to the direct use of the primary photoproduct. The possible transformation mechanisms of S(IV) and mineralization routes of both pollutants were proposed. This study may provide new insights into the mechanisms involved in UV/S(IV) process and a promising alternative for efficient removal of ECs in water.

Sulfite enhanced transformation of iopamidol by UV photolysis in the presence of oxygen: Role of oxysulfur radicals

UV/sulfite process in the absence of oxygen was previously applied as an advanced reduction process for the removal of many halogenated organics and inorganics in water and wastewater. Here, it was found that UV/sulfite process in the presence of oxygen could act as an advanced oxidation process. Specifically, the oxysulfur radicals (including sulfate radical (SO₄^·-) and sulfite/peroxomonosulfate radicals (SO₃^·-/SO₅^·-)) played important roles on the degradation of iopamidol (IPM) as a typical iodinated contrast media (ICM). Furthermore, the contribution of SO₄^·- on IPM removal gradually increased as pH increased from 5 to 7 and that of SO₃^·-/SO₅^·- decreased. Besides, all water quality parameters (i.e., chloride (Cl^-), iodide (I^-) and natural organic matter (NOM)) investigated here exhibited inhibitory effect on IPM removal. Three inorganic iodine species (i.e., I^-, reactive iodine species and iodate (IO₃^-)) were detected in UV/sulfite process in the presence of oxygen, while only I^- was detected in that without oxygen. During UV/sulfite/ethanol, UV photolysis and UV/peroxydisulfate (PDS)/tert-butyl alcohol (TBA) processes, thirteen transformation products including eleven deiodinated products of IPM were identified by ultra HPLC quadrupole time of flight-mass spectrometry (UPLC-Q-TOF-MS). Besides, these products generated by direct UV photolysis, SO₄^·- and SO₃^·-/SO₅^·- were further distinguished. The acute toxicity assay of Vibrio fischeri indicated that transformation products by UV/sulfite under aerobic conditions were less toxic than that by direct UV photolysis.