A Self-Healing Polymer with Fast Elastic Recovery upon Stretching

A variable-stiffness and healable pneumatic actuator

Pneumatic-powered actuators are receiving increasing attention due to their widespread applications. However, their inherent low stiffness makes them incompetent in tasks requiring high load capacity or high force output. On the other hand, soft pneumatic actuators are susceptible to damage caused by over-pressuring or punctures by sharp objects. In this work, we designed and synthesized a coordination adaptable network (PETMP-AIM-Cu) with high mechanical rigidity (Young's modulus of 1.9 GPa and elongation <2% before fracturing) as well as excellent variable stiffness property (soft-rigid switching ability σ as high as 3 268 000 when ΔT = 90 °C). Combining PETMP-AIM-Cu with a self-healing elastomer based on dynamic disulfide bonds (LP-PDMS), we fabricated a new pneumatic actuator which shows high load capacity at room temperature, but can also easily deform upon heating and thus can be actuated pneumatically. Benefiting from the excellent self-healing ability of PETMP-AIM-Cu and LP-PDMS, the entire pneumatic actuator can still be actuated after being cut and healed. Such a variable-stiffness and healable pneumatic actuator would be useful for complex environmental applications.

Self-Healing of Polymers and Polymer Composites

This review is devoted to the description of methods for the self-healing of polymers, polymer composites, and coatings. The self-healing of damages that occur during the operation of the corresponding structures makes it possible to extend the service life of the latter, and in this case, the problem of saving non-renewable resources is simultaneously solved. Two strategies are considered: (a) creating reversible crosslinks in the thermoplastic and (b) introducing a healing agent into cracks. Bond exchange reactions in network polymers (a) proceed as a dissociative process, in which crosslinks are split into their constituent reactive fragments with subsequent regeneration, or as an associative process, the limiting stage of which is the interaction of the reactive end group and the crosslink. The latter process is implemented in vitrimers. Strategy (b) is associated with the use of containers (hollow glass fibers, capsules, microvessels) that burst under the action of a crack. Particular attention is paid to self-healing processes in metallopolymer systems.

From passive to emerging smart silicones

Amassing remarkable properties, silicones are practically indispensable in our everyday life. In most classic applications, they play a passive role in that they cover, seal, insulate, lubricate, water-proof, weather-proof etc. However, silicone science and engineering are highly innovative, seeking to develop new compounds and materials that meet market demands. Thus, the unusual properties of silicones, coupled with chemical group functionalization, has allowed silicones to gradually evolve from passive materials to active ones, meeting the concept of “smart materials”, which are able to respond to external stimuli. In such cases, the intrinsic properties of polysiloxanes are augmented by various chemical modifications aiming to attach reactive or functional groups, and/or by engineering through proper cross-linking pattern or loading with suitable fillers (ceramic, magnetic, highly dielectric or electrically conductive materials, biologically active, etc.), to add new capabilities and develop high value materials. The literature and own data reflecting the state-of-the art in the field of smart silicones, such as thermoplasticity, self-healing ability, surface activity, electromechanical activity and magnetostriction, thermo-, photo-, and piezoresponsivity are reviewed.

Preparation of conductive self-healing hydrogels via an interpenetrating polymer network method

Conductive self-healing hydrogels and related soft sensor devices are gaining extensive attention from academia to industry because of their impacts on the lifetime and ergonomic design of artificial skins and soft robotics, as well as health monitoring systems. However, so far the development of such a material has been limited considering performance and availability. In this work, we developed composite hydrogels of acrylamide, polyacrylamide, dialdehyde-functionalized poly(ethylene glycol) and conductive carbon black through an interpenetrating polymer network strategy. After optimizing the composition ratio, the resultant hydrogel exhibited self-healing reversibility mechanically and electrically when cut and self-healed. We used ¹H NMR and FT-IR spectroscopy to determine the self-healing mechanism of the system, thus demonstrating that the cooperative effect of the dynamic covalent and noncovalent interactions contributes to the self-healing capability of the gel. Rheology, scanning electron microscopy and light-emitting diode circuits were carried out to examine its macroscopic and microscopic properties, making it possible to apply in soft and conformable electronics.

A new type of conductive interpenetrating polymer network hydrogel exhibited self-healing reversibility mechanically and electrically when cut and self-healed, making it possible to apply in soft and conformable electronics.

Self-Healing Mechanisms for 3D-Printed Polymeric Structures: From Lab to Reality

Existing self-healing mechanisms are still very far from full-scale implementation, and most published work has only demonstrated damage cure at the laboratory level. Their rheological nature makes the mechanisms for damage cure difficult to implement, as the component or structure is expected to continue performing its function. In most cases, a molecular bond level chemical reaction is required for complete healing with external stimulations such as heating, light and temperature change. Such requirements of external stimulations and reactions make the existing self-healing mechanism almost impossible to implement in 3D printed products, particularly in critical applications. In this paper, a conceptual description of the self-healing phenomenon in polymeric structures is provided. This is followed by how the concept of self-healing is motivated by the observation of nature. Next, the requirements of self-healing in modern polymeric structures and components are described. The existing self-healing mechanisms for 3D printed polymeric structures are also detailed, with a special emphasis on their working principles and advantages of the self-healing mechanism. A critical discussion on the challenges and limitations in the existing working principles is provided at the end. A novel self-healing idea is also proposed. Its ability to address current challenges is assessed in the conclusions.