Coumarins as Powerful Photosensitizers for the Cationic Polymerization of Epoxy-Silicones under Near-UV and Visible Light and Applications for 3D Printing Technology

Fabrication of a Liquid Scintillator based on 7-Diethylamino-4-Methylcoumarin for Radiation Detection

Organic liquid scintillation detectors are widely used to measure the presence of radiation. With these devices, there are advantages in that they are easy to manufacture, large in size, and have a short fluorescence decay time. However, they are not suitable for gamma spectroscopy because they are composed of a low-atomic-number material. In this regard, alternative materials for the secondary solute used in basic organic liquid scintillators have been investigated, and the applicability of alternative materials, the detection characteristics, and neutron/gamma identification tests were all assessed. 7-Diethylamino-4-methylcoumarin (DMC), selected as an alternative material, is a benzopyrone derivative in the form of colorless crystals with high fluorescence, a high quantum yield in the visible region, and excellent light stability. In addition, it has a large Stokes shift, and solubility in a solvent is good. Through an analysis in this study, it was found that the absorption wavelength range of DMC coincides with the emission wavelength range of PPO, which is the primary solute used with DMC. Finally, it was confirmed that the optimal concentration of DMC was 0.08 wt%. As a result of performing gamma and neutron measurement tests using a DMC-based liquid scintillator, it was found to perform well (FOM = 1.42) compared to a commercial liquid scintillator, BC-501A.

Synthesis, Antioxidant and Antiproliferative Evaluation, Molecular Docking and DFT Studies of Some Novel Coumarin and Fused Coumarin Derivatives

N'-[(4-Chloro-2-oxo-2H-chromen-3-yl)methylene]-2-cyanoacetohydrazide (3) was synthesized in excellent yield from the condensation of 4-Chloro-2-oxo-2H-chromene-3-carbaldehyde with cyanoacetohydrazide. Compound 3 was utilized as a building block to synthesize novel coumarin and heterocycle-fused coumarin derivatives. The chemical structures of all the new coumarin compounds were identified by spectral analyses. Some of the new coumarins compounds were screened in human cancer cell lines (HEPG-2, MCF-7, HCT-116 and PC-3) to learn about their cytotoxic effects in addition to the study of their DNA damage and antioxidant activity. Three of these compounds exhibited remarkable antioxidant and anti-proliferative activities. Moreover, they have the capability to protect DNA from damage induced by bleomycin. Molecular docking, DFT and molecular electrostatic potential studies were performed on the compounds in vitro.

Phototriggered structures: Latest advances in biomedical applications

Non-invasive control of the drug molecules accessibility is a key issue in improving diagnostic and therapeutic procedures. Some studies have explored the spatiotemporal control by light as a peripheral stimulus. Phototriggered drug delivery systems (PTDDSs) have received interest in the past decade among biological researchers due to their capability the control drug release. To this end, a wide range of phototrigger molecular structures participated in the DDSs to serve additional efficiency and a high-conversion release of active fragments under light irradiation. Up to now, several categories of PTDDSs have been extended to upgrade the performance of controlled delivery of therapeutic agents based on well-known phototrigger molecular structures like o-nitrobenzyl, coumarinyl, anthracenyl, quinolinyl, o-hydroxycinnamate and hydroxyphenacyl, where either of one endows an exclusive feature and distinct mechanistic approach. This review conveys the design, photochemical properties and essential mechanism of the most important phototriggered structures for the release of single and dual (similar or different) active molecules that have the ability to quickly reason of the large variety of dynamic biological phenomena for biomedical applications like photo-regulated drug release, synergistic outcomes, real-time monitoring, and biocompatibility potential.

Synthesis and antimicrobial activity of new series of thiazoles, pyridines and pyrazoles based on coumarin moiety

Microbial infections are currently a widespread disease in hospitals and community health centres and are a major cause of death worldwide. In pursuit of searching new antimicrobial agents, coumarin linked to thiazoles, pyridines and pyrazoles have been developed and evaluated for their antimicrobial properties against two Gram + bacteria, two Gram - bacteria as well as two fungi. Some of the prepared coumarins displayed high to moderate activity against the tested microorganisms with respect to the reference drugs. However, compound 3 exhibited antimicrobial effect equal to the reference drug Ciprofloxacin for Gram - baceria Enterobacter cloacae. Compound 12 was found to be the most potent compound against Bacillus pumilis with MIC of 7.69 (µmol/ml). Compounds 3, 4 and 12 showed remarkable activity against Streptococcus faecalis with MIC of 14.34, 3.67 and 15.36 (µmol/ml), respectively. Regarding Escherichia coli, most compounds recorded high to moderate MIC values (4.73-45.46 µmol/ml). Moreover, in case of E. cloacae compound 9 was the most potent compound with MIC value of 22.76 (µmol/ml).

Ynamides in Radical Reactions: A Route to Original Persubstituted 2-Aminofurans

Mn(OAc)₃/Cu(OAc)₂-mediated reaction between ynamides, derived from oxazolidone or 3-methylindole carboxylate, and cyclic α-dicarbonyl radicals led to the one-pot synthesis of 2-aminofurans. The transformation involves addition of the α-dicarbonyl radical to ynamide, oxidation to ketene-iminium, and polar cyclization steps to provide original persubstituted 2-aminofurans in good to excellent yields. This work represents the first radical route for the synthesis of furans from ynamides.

3D printing of bone and cartilage with polymer materials

Damage and degeneration to bone and articular cartilage are the leading causes of musculoskeletal disability. Commonly used clinical and surgical methods include autologous/allogeneic bone and cartilage transplantation, vascularized bone transplantation, autologous chondrocyte implantation, mosaicplasty, and joint replacement. 3D bio printing technology to construct implants by layer-by-layer printing of biological materials, living cells, and other biologically active substances in vitro, which is expected to replace the repair mentioned above methods. Researchers use cells and biomedical materials as discrete materials. 3D bio printing has largely solved the problem of insufficient organ donors with the ability to prepare different organs and tissue structures. This paper mainly discusses the application of polymer materials, bio printing cell selection, and its application in bone and cartilage repair.

Recent progress in the development of highly active dyeing photoinitiators based on 1,3-bis(p-substituted phenylamino)squaraines for radical polymerization of acrylates

The photopolymerization is a very popular technique used in the production of various polymeric materials. The key role in the light induced polymerization processes plays a photoinitiator. One of the...

Recent Advances in bis-Chalcone-Based Photoinitiators of Polymerization: From Mechanistic Investigations to Applications

Over the past several decades, photopolymerization has become an active research field, and the ongoing efforts to develop new photoinitiating systems are supported by the different applications in which this polymerization technique is involved-including dentistry, 3D and 4D printing, adhesives, and laser writing. In the search for new structures, bis-chalcones that combine two chalcones' moieties within a unique structure were determined as being promising photosensitizers to initiate both the free-radical polymerization of acrylates and the cationic polymerization of epoxides. In this review, an overview of the different bis-chalcones reported to date is provided. Parallel to the mechanistic investigations aiming at elucidating the polymerization mechanisms, bis-chalcones-based photoinitiating systems were used for different applications, which are detailed in this review.

3-Carboxylic Acid and Formyl-Derived Coumarins as Photoinitiators in Photo-Oxidation or Photo-Reduction Processes for Photopolymerization upon Visible Light: Photocomposite Synthesis and 3D Printing Applications

In this paper, nine organic compounds based on the coumarin scaffold and different substituents were synthesized and used as high-performance photoinitiators for free radical photopolymerization (FRP) of meth(acrylate) functions under visible light irradiation using LED at 405 nm. In fact, these compounds showed a very high initiation capacity and very good polymerization profiles (both high rate of polymerization (Rp) and final conversion (FC)) using two and three-component photoinitiating systems based on coum/iodonium salt (0.1%/1% w/w) and coum/iodonium salt/amine (0.1%/1%/1% w/w/w), respectively. To demonstrate the efficiency of the initiation of photopolymerization, several techniques were used to study the photophysical and photochemical properties of coumarins, such as: UV-visible absorption spectroscopy, steady-state photolysis, real-time FTIR, and cyclic voltammetry. On the other hand, these compounds were also tested in direct laser write experiments (3D printing). The synthesis of photocomposites based on glass fiber or carbon fiber using an LED conveyor at 385 nm (0.7 W/cm²) was also examined.

Past, Present, and Future of Soft-Tissue Prosthetics: Advanced Polymers and Advanced Manufacturing

Millions of people worldwide experience disfigurement due to cancers, congenital defects, or trauma, leading to significant psychological, social, and economic disadvantage. Prosthetics aim to reduce their suffering by restoring aesthetics and function using synthetic materials that mimic the characteristics of native tissue. In the 1900s, natural materials used for thousands of years in prosthetics were replaced by synthetic polymers bringing about significant improvements in fabrication and greater realism and utility. These traditional methods have now been disrupted by the advanced manufacturing revolution, radically changing the materials, methods, and nature of prosthetics. In this report, traditional synthetic polymers and advanced prosthetic materials and manufacturing techniques are discussed, including a focus on prosthetic material degradation. New manufacturing approaches and future technological developments are also discussed in the context of specific tissues requiring aesthetic restoration, such as ear, nose, face, eye, breast, and hand. As advanced manufacturing moves from research into clinical practice, prosthetics can begin new age to significantly improve the quality of life for those suffering tissue loss or disfigurement.

Recent Advances on Copper Complexes as Visible Light Photoinitiators and (Photo) Redox Initiators of Polymerization

Metal complexes are used in numerous chemical and photochemical processes in organic chemistry. Metal complexes have not been excluded from the interest of polymerists to convert liquid resins into solid materials. If iridium complexes have demonstrated their remarkable photochemical reactivity in polymerization, their high costs and their attested toxicities have rapidly discarded these complexes for further developments. Conversely, copper complexes are a blooming field of research in (photo) polymerization due to their low cost, easy syntheses, long-living excited state lifetimes, and their remarkable chemical and photochemical stabilities. Copper complexes can also be synthesized in solution and by mechanochemistry, paving the way towards the synthesis of photoinitiators by Green synthetic approaches. In this review, an overview of the different copper complexes reported to date is presented. Copper complexes are versatile candidates for polymerization, as these complexes are now widely used not only in photopolymerization, but also in redox and photoassisted redox polymerization processes.