High Homogenization Pressures to Improve Food Quality, Functionality and Sustainability

Potential use of yeast protein in terms of biorefinery, functionality, and sustainability in food industry

A growing demand for sustainable, alternative protein sources that are nutrient-dense, such as microorganisms, and insects, has gradually evolved. When paired with effective processing techniques, yeast cells contain substantial substances that could supply the population's needs for food, medicine, and fuel. This review article explores the potential of yeast proteins as a sustainable and viable alternative to animal and plant-based protein sources. It highlights the various yeast protein extraction methods including both mechanical and non-mechanical methods. The application of nanoparticles is one example of the fast-evolving technology used to damage microbial cells. SiO2 or Al2O3 nanoparticles break yeast cell walls and disrupt membranes, releasing intracellular bioactive compounds. Succinylation of yeast protein during extraction can increase yeast protein extraction rate, lower RNA concentration, raise yeast protein solubility, increase amino acid content, and improve yeast protein emulsification and foaming capabilities. Combining physical and enzymatic extraction methods generates the most representative pool of mannose proteins from yeast cell walls. Ethanol or isoelectric precipitation purifies mannose proteins. Mannoproteins can be used as foamy replacement for animal-derived components like egg whites due to their emulsification, stability, and foaming capabilities. Yeast bioactive peptide was separated by ultrafiltration after enzymatic hydrolysis of yeast protein and has shown hypoglycemic, hypotensive, and oxidative action in vitro studies. Additionally, the review delves into the physicochemical properties and stability of yeast-derived peptides as well as their applications in the food industry. The article infers that yeast proteins are among the promising sources of sustainable protein, with a wide range of potential applications in the food industry.

Design and advanced characterization of quercetin-loaded nano-liposomes prepared by high-pressure homogenization

Quercetin-loaded nano-liposomes were prepared by high-pressure homogenization (HPH) at different pressures (up to 150 MPa) and number of passes (up to 3) to define the best processing conditions allowing the lowest particle size and the highest encapsulation efficiency (EE). The process at 150 MPa for 1 pass was the best, producing quercetin-loaded liposomes with the lowest particle size and 42% EE. Advanced techniques (multi-detector asymmetrical-flow field flow fractionation and analytical ultracentrifugation combined with transmission electron microscopy) were further used for the characterization of the liposomes which were oblong in shape (ca. 30 nm). Results highlight the need for several techniques to study nano-sized, polydisperse samples. The potential of quercetin-loaded liposomes against colon cancer cells was demonstrated. Results prove that HPH is an efficient and sustainable method for liposome preparation and highlight the remarkable role of process optimisation as well as the powerfulness of advanced methodologies for the characterisation of nano-structures.

Brazil Nut (Bertholletia excelsa) Beverage Processed by High-Pressure Homogenization: Changes in Main Components and Antioxidant Capacity during Cold Storage

High-pressure homogenization (HPH) is an emerging technology for obtaining physical and microbial stability of plant-based milks, but there is little information on the effects of this technology on the phytochemical components of the processed plant food beverage and during its cold storage. The effect of three selected HPH treatments (180 MPa/25 °C, 150 MPa/55 °C, and 50 MPa/75 °C) and pasteurization (PAS) (63 °C, 20 min) on minor lipid constituents, total proteins, phenolic compounds, antioxidant capacity, and essential minerals of Brazil nut beverage (BNB) were studied. Additionally, the study of the possible changes in these constituents was carried out during cold storage at 5 °C for 21 days. The fatty acid profile (dominated by oleic acid and linoleic acid), free fatty acid content, protein, and essential minerals (notable source of Se and Cu) of the processed BNB remained almost stable to treatments (HPH and PAS). Specifically, reductions in squalene (22.7 to 26.4%) and γ-γ-tocopherol (28.4 to 36%) were observed in beverages processed via both non-thermal HPH and thermal PAS, but β-sitosterol remained unchanged. Total phenolics were reduced (24 to 30%) after both treatments, a factor that influenced the observed antioxidant capacity. The studied individual phenolics in BNB were gallic acid, catechin, epicatechin, catechin gallate, and ellagic acid, being the most abundant compounds. During cold storage (5 °C) up to 21 days, changes in the content of phytochemicals, minerals, and total proteins were not noticeable for any treated beverages, and no lipolysis processes were promoted. Therefore, after the application of HPH processing, Brazil nut beverage (BNB) maintained almost unaltered levels of bioactive compounds, essential minerals, total protein, and oxidative stability, remarkable characteristics for its potential development as a functional food.

Validation of High-Pressure Homogenization Process to Pasteurize Brazil Nut (Bertholletia excelsa) Beverages: Sensorial and Quality Characteristics during Cold Storage

The effect of high-pressure homogenization (HPH) on the inactivation of Escherichia coli and the stability of the quality properties of Brazil nut beverages were studied. E. coli was used as target microorganism to validate the HPH process (pressures from 50 to 180 MPa and inlet temperatures (Ti) from 25 to 75 °C). Cold storage (5 °C) for 21 days was conducted to establish the shelf-life of BN beverages, in terms of their microbiological, physical, physicochemical, and sensorial stability. HPH-treated samples were compared to pasteurized BN beverages (63 °C for 20 min). The combination of Ti and the pressure of the HPH process (50 to 150 MPa/75 °C and 180 MPa/25 °C) had a significant effect on E. coli inactivation (8.2 log CFU/mL). During storage at 5 °C, the growth of mesophilic aerobes in processed BN beverages was controlled by the HPH process. Oxidative stability (TBAR assay) and physicochemical properties (pH, acidity, and °Brix) were evaluated during cold storage, showing good stability. Additionally, HPH-treated beverages showed a reduction in their particle size and the formation of more stable protein aggregates, which favored the beverages’ whiteness (color). The HPH process could be an alternative to pasteurization to obtain Brazil nut beverages with an acceptable microbiological shelf life (≥21 days at 5 °C) and high-quality characteristics without the use of any additives.

Biotechnological interventions in food waste treatment for obtaining value-added compounds to combat pollution

Over the last few decades, the globe is facing tremendous effects due to the unnecessary piling of municipal solid waste among which food waste holds a greater portion. This practice not only affects the environment in terms of generating greenhouse gas emissions but when left dumped in landfills will also trigger poverty and malnutrition. This review focuses on the global trend in food waste management strategies involved in the effective utilization of food waste to produce various value-added products in a microbiology aspect, thereby diminishing the negative impacts caused by the unnecessary side effects of non-renewable energy sources. The review also detailed the efficiency of microorganisms in the production of various bio-energies as well. Further, recent attempts to the exploitation of genetically modified microorganisms in producing value-added products were enlisted. This also attempted to address food waste valorization techniques, the combined applications of various processes for an enhanced yield of different compounds, and addressed various challenges. Further, the current challenges involved in various processes and the effective measures to tackle them in the future have been addressed. Thus, the present review has successfully addressed the circular bio-economy in food waste valorization.

Comparison of the Effect of Hydrostatic and Dynamic High Pressure Processing on the Enzymatic Activity and Physicochemical Quality Attributes of 'Ataulfo' Mango Nectar

The effects of hydrostatic (HHP) and dynamic (HPH) high-pressure treatments on the activity of pectin methylesterase (PME) and polyphenol oxidase (PPO) as well as the physicochemical quality attributes of ‘Ataulfo’ mango nectar were assessed. HHP reduced PME relative activity by 28% at 100 MPa for 5 min but increased PPO activity almost five-fold. Contrarily, HPH did not affect PME activity, but PPO was effectively reduced to 10% of residual activity at 300 MPa and at three passes. Color parameters (CIEL*a*b*), °hue, and chroma were differently affected by each type of high-pressure processing technology. The viscosity and fluid behavior were not affected by HHP, however, HPH changed the apparent viscosity at low dynamic pressure levels (100 MPa with one and three passes). The viscosity decreased at high shear rates in nectar samples, showing a shear-thinning effect. The results highlight how different effects can be achieved with each high-pressure technology; thus, selecting the most appropriate system for processing and preserving liquid foods like fruit beverages is recommended.

Cellulose Isolation from Tomato Pomace Pretreated by High-Pressure Homogenization

This work proposes a biorefinery approach for the utilization of agri-food residues, such as tomato pomace (TP), through combining chemical hydrolysis with high-pressure homogenization (HPH), aiming to achieve the isolation of cellulose with tailored morphological properties from underused lignocellulose feedstocks, along with the valorization of the value-added compounds contained in the biomass. Cellulose was isolated from TP using sequential chemical hydrolysis in combination with mechanical pretreatment through HPH. The chemical and structural features of cellulose isolated from TP pretreated by HPH were compared with cellulose isolated from untreated TP through light scattering for particle size distribution, optical and scanning electron microscopy, and Fourier-transform infrared spectroscopy (FT-IR) analysis. HPH pretreatment (80 MPa, 10 passes) not only promoted a slight increase in the yield of cellulose extraction (+9%) but contributed to directly obtaining defibrillated cellulose particles, characterized by smaller irregular domains containing elongated needle-like fibers. Moreover, the selected mild chemical process produced side streams rich in bioactive molecules, evaluated in terms of total phenols and reducing activity. The liquors recovered from acid hydrolysis of TP exhibited a higher biological activity than those obtained through a conventional extraction (80% v/v acetone, 25 °C, 24 h at 180 rpm).

Morphological, structural and physicochemical properties of rice starch nanoparticles prepared via ultra-high pressure homogenization

Native rice starches were treated with five periods of ultra-high pressure homogenization (UHPH) under each of 60, 80, 100, 120, 140 and 160 MPa, respectively. The morphological, structural and physicochemical properties of starches treated with UHPH were examined. The mean particle diameter of starch nanoparticles ranged between 154.20 and 260.40 nm. SEM revealed that the granular amorphous region of starch granules was damaged under pressures between 60 and 80 MPa, and the crystalline region was further destroyed under pressures as high as 100–160 MPa. DSC demonstrated that the gelatinization temperatures and enthalpies of nanoparticles reduced. The relative crystallinity reduced from 22.90 to 13.61% as the pressure increased. FTIR showed that the absorbance ratio at 1047/1022 cm−1 decreased, and increased at 1022/995 cm−1. RVA results indicated that the viscosity of starch samples increased between 60 and 120 MPa, and the reverse effect was observed under 140 and 160 MPa.

Emerging Green Techniques for the Extraction of Antioxidants from Agri-Food By-Products as Promising Ingredients for the Food Industry

Nowadays, the food industry is heavily involved in searching for green sources of valuable compounds, to be employed as potential food ingredients, to cater to the evolving consumers’ requirements for health-beneficial food ingredients. In this frame, agri-food by-products represent a low-cost source of natural bioactive compounds, including antioxidants. However, to effectively recover these intracellular compounds, it is necessary to reduce the mass transfer resistances represented by the cellular envelope, within which they are localized, to enhance their extractability. To this purpose, emerging extraction technologies, have been proposed, including Supercritical Fluid Extraction, Microwave-Assisted Extraction, Ultrasound-Assisted Extraction, High-Pressure Homogenization, Pulsed Electric Fields, High Voltage Electrical Discharges. These technologies demonstrated to be a sustainable alternative to conventional extraction, showing the potential to increase the extraction yield, decrease the extraction time and solvent consumption. Additionally, in green extraction processes, also the contribution of solvent selection, as well as environmental and economic aspects, represent a key factor. Therefore, this review focused on critically analyzing the main findings on the synergistic effect of low environmental impact technologies and green solvents towards the green extraction of antioxidants from food by-products, by discussing the main associated advantages and drawbacks, and the criteria of selection for process sustainability.

Potential Use of Vacuum Impregnation and High-Pressure Homogenization to Obtain Functional Products from Lulo Fruit (Solanum quitoense Lam.)

Lulo (Solanum quitoense Lam.) is a Colombian fruit that is mostly used in the preparation of homemade juice as well as natural remedy for hypertension. The aim of this study was to determine physicochemical and antioxidant properties (antioxidant capacity, total phenols, flavonoids and spermidine content, and polyphenolic compounds profile by liquid chromatography-mass spectrometry (LC-MS)) of the lulo fruit and its juice. Additionally, vacuum impregnation (VI) properties of the fruit and the effect of high homogenization pressure (50, 100, and 150 MPa) on the juice properties were studied. The results revealed a good availability and impregnation capacity of the pores in fruits with similar maturity index. The main differences observed between the juice and fruit derive from removing solids and bioactive components in the filtering operation. However, the effect of high-pressure homogenization (HPH) on particle size and bioactive compounds increases the antiradical capacity of the juice and the diversity in polyphenolics when increasing the homogenization pressure.

Sustainable processing of food waste for production of bio-based products for circular bioeconomy

Sustainable development of circular bioeconomy concept is only possible upon adopting potential advanced technologies for food waste valorization. This approach can simultaneously answer resources and environmental challenges incurred due to capital loss and greenhouse gases accumulation. Food waste valorization opens new horizons of economical growth, bringing waste as an opportunity feedstock for bio processes to synthesize biobased products from biological source in a circular loop. Advanced technologies like Ultrasound assisted extraction, Microwave assisted extraction, bioreactors, enzyme immobilization assisted extraction and their combination mitigates the global concern caused due to mismanagement of food waste. Food waste decomposition to sub-zero level using advanced techniques fabricates food waste into bio-based products like bioactive compounds (antioxidants, pigments, polysaccharides, polyphenols, etc.); biofuels (biodiesel, biomethane, biohydrogen); and bioplastics. This review abridges merits and demerits of various advanced techniques extended for food waste valorization and contribution of food waste in revenue generation as value added products.

A comprehensive review on the application of novel disruption techniques for proteins release from microalgae

There is an emergent demand for sustainable and alternative protein sources such as insects and microorganisms that meet the nutritional requirements. Microalgae possess valuable substances that could satisfy the population's dietary requirement, medicinal purpose, and energy, aligned with effective processing techniques. Several disruption techniques were applied to microalgae species for protein recovery and other compounds. The thick microalgae cell wall makes it difficult to recover all the valuable biomolecules through several downstream processes. Thus, forethought key factors need to be considered when choosing a cell lysis method. The most challenging and crucial issue is selecting a technique that requires consideration of their ability to disrupt all cell types, easy to use, purity degree, reproducible, scalable, and energy efficient. This review aims to provide useful information specifically on mechanical and non-mechanical disruption methods, the status and potential in protein extraction capacities, and constraints. Therefore, further attention in the future on potential technologies, namely explosive decompression, microfluidization, pulsed arc technology, is required to supplement the discussed techniques. This article summarizes recent advances in cell disruption methods and demonstrates insights on new directions of the techniques and future developments.

Impact of High-Pressure Homogenization on the Extractability and Stability of Phytochemicals

High-pressure homogenization (HPH) and high-pressure processing (HPP) are emerging technologies for the food industry. Both technologies employ high pressure to preserve foods. However, the principal mechanism of HPH is based on shear stress distribution in a material instead of a decrease in volume due to an increase in pressure as occurring in HPP. HPH can be used in extraction or preservation of bioactive compounds and phytochemicals. This review first describes the mechanism of HPH processing. Next, this review discusses the impact of HPH on extractability and stability of phytochemicals such as carotenoids, vitamin C, polyphenols, and anthocyanins in various food matrices. In general, the use of HPH slightly improved or maintained the extractability of the phytochemicals. Similarly, HPH slightly reduced or maintained the stability of the phytochemicals but this is dependent on the food matrix and type of phytochemical. HPH has a great potential to be used to improve the extractability and maintaining the stability of these phytochemicals or to be used together with milder thermal processing. Besides understanding the impact of HPH on the extractability and stability of phytochemicals, the impact of HPH on the nutritional quality of the food matrices needs to be thoroughly evaluated.

Impact of Innovative Technologies on the Content of Vitamin C and Its Bioavailability from Processed Fruit and Vegetable Products

Nowadays, thermal treatments are used for extending the shelf-life of vegetable and fruit products by inactivating microorganisms and enzymes. On the other hand, heat treatments often induce undesirable changes in the quality of the final product, e.g., losses of nutrients, color alterations, changes in flavor, and smell. Therefore, the food industry is opening up to new technologies that are less aggressive than thermal treatment to avoid the negative effects of thermal pasteurization. Non-thermal processing technologies have been developed during the last decades as an alternative to thermal food preservation. Processing changes the structure of fruit and vegetables, and hence the bioavailability of the nutrients contained in them. In this review, special attention has been devoted to the effects of modern technologies of fruit and vegetable processing, such as minimal processing (MPFV), high-pressure processing (HPP), high-pressure homogenization (HPH), ultrasounds (US), pulsed electric fields (PEF), on the stability and bioavailability of vitamin C.