Synthesis of Nucleobase-Modified RNA Oligonucleotides by Post-Synthetic Approach

Control of Solid-Supported Intra- vs Interstrand Stille Coupling Reactions for Synthesis of DNA-Oligophenylene Conjugates

Programmed DNA structures and assemblies are readily accessible, but site-specific functionalization is critical to realize applications in various fields such as nanoelectronics, nanomaterials and biomedicine. Besides pre- and post-DNA synthesis conjugation strategies, on-solid support reactions offer advantages in certain circumstances. We describe on-solid support internucleotide coupling reactions, often considered undesirable, and a workaround strategy to overcome them. Palladium coupling reactions enabled on-solid support intra- and interstrand coupling between single-stranded DNAs (ss-DNAs). Dilution with a capping agent suppressed interstrand coupling, maximizing intrastrand coupling. Alternatively, interstrand coupling actually proved advantageous to provide dimeric organic/DNA conjugates that could be conveniently separated from higher oligomers, and was more favorable with longer terphenyl coupling partners.

RNA nanotechnology on the horizon: Self-assembly, chemical modifications, and functional applications

RNA nanotechnology harnesses the unique chemical and structural properties of RNA to build nanoassemblies and supramolecular structures with dynamic and functional capabilities. This review focuses on design and assembly approaches to building RNA structures, the RNA chemical modifications used to enhance stability and functionality, and modern-day applications in therapeutics, biosensing, and bioimaging.

Selective Arylation of RNA 2'-OH Groups via SNAr Reaction with Trialkylammonium Heterocycles

Small-molecule reactions at the 2'-OH groups of RNA enable useful applications for transcriptome technology and biology. To date, all reactions have involved carbonyl acylation and mechanistically related sulfonylation, limiting the types of modifications and properties that can be achieved. Here we report that electron-deficient heteroaryl species selectively react with 2'-OH groups of RNA in water via SNAr chemistry. In particular, trialkyl-ammonium (TAA)-activated aromatic heterocycles, prepared in one step from aryl chloride precursors, give high conversions to aryl ether adducts with RNAs in aqueous buffer in ~2-3 h. Remarkably, a TAA triazine previously used only for reaction with carboxylic acids, shows unprecedented selectivity for RNA over water, reacting rapidly with 2'-OH groups while exhibiting a half-life in water of >10 days. We further show that a triazine aryl species can be used as a probe at trace-level yields to map RNA structure in vitro. Finally, we prepare a number of functionalized trialkylammonium triazine reagents and show that they can be used to covalently label RNA efficiently for use in vitro and in living cells. This direct arylation chemistry offers a simple and distinct structural scaffold for post-synthetic RNA modification, with potential utility in multiple applications in transcriptome research.

Chemical Synthesis of Modified RNA

Ribonucleic acids (RNAs) play a vital role in living organisms. Many of their cellular functions depend critically on chemical modification. Methods to modify RNA in a controlled manner-both in vitro and in vivo-are thus essential to evaluate and understand RNA biology at the molecular and mechanistic levels. The diversity of modifications, combined with the size and uniformity of RNA (made up of only 4 nucleotides) makes its site-specific modification a challenging task that needs to be addressed by complementary approaches. One such approach is solid-phase RNA synthesis. We discuss recent developments in this field, starting with new protection concepts in the ongoing effort to overcome current size limitations. We continue with selected modifications that have posed significant challenges for their incorporation into RNA. These include deazapurine bases required for atomic mutagenesis to elucidate mechanistic aspects of catalytic RNAs, and RNA containing xanthosine, N4-acetylcytidine, 5-hydroxymethylcytidine, 3-methylcytidine, 2'-OCF3, and 2'-N3 ribose modifications. We also discuss the all-chemical synthesis of 5'-capped mRNAs and the enzymatic ligation of chemically synthesized oligoribonucleotides to obtain long RNA with multiple distinct modifications, such as those needed for single-molecule FRET studies. Finally, we highlight promising developments in RNA-catalyzed RNA modification using cofactors that transfer bioorthogonal functionalities.

Oligonucleotide-Based Photoaffinity Probes: Chemical Tools and Applications for Protein Labeling

A variety of proteins interact with DNA and RNA, including polymerases, histones, ribosomes, transcription factors, and repair enzymes. However, the transient non-covalent nature of these interactions poses challenges for analysis. Introducing a covalent bond between proteins and DNA via photochemical activation of a photosensitive functional group introduced onto nucleic acids offers a means to stabilize these often weak interactions without significantly altering the binding interface. Consequently, photoactivatable oligonucleotides are powerful tools for investigating nucleic acid-protein interactions involved in numerous biological and pathological processes. In this review, we provide a comprehensive overview of the chemical tools developed so far and the different strategies used for incorporating the most commonly used photoreactive reagents into oligonucleotide probes or nucleic acids. Furthermore, we illustrate their application with several examples including protein binding site mapping, identification of protein binding partners, and in cell studies.

Synthesis of fluorescent 5-heteroarylpyrimidine-containing oligonucleotides via post-synthetic trifluoromethyl conversion

Post-synthetic conversion of the trifluoromethyl group to a heteroaryl group at the C5 position of the pyrimidine base in DNA oligonucleotides was achieved. Specifically, the oligonucleotides containing 5-trifluoromethylpyrimidine bases were treated with o-phenylenediamines and o-aminothiophenols as nucleophiles to afford the corresponding 5-(benzimidazol-2-yl)- and 5-(benzothiazol-2-yl)-pyrimidine-modified bases. Furthermore, evaluation of the fluorescence properties of the obtained oligonucleotides revealed that among them the oligonucleotide containing 5-(5-methylbenzimidazol-2-yl)cytosine exhibited the highest fluorescence intensity. These results indicated that post-synthetic trifluoromethyl conversion, which is practical and operationally simple, is a powerful tool for exploring functional oligonucleotides.

Aqueous Activation of RNA 2'-OH for Conjugation with Amines and Thiols

Strategies for covalent modification of RNA are important for enabling biological studies of the biopolymer and for enhancing properties of therapeutic RNAs. While a number of electrophiles have been observed to react with RNA, few methods exist for reaction with nucleophiles. Here, we describe new reagents that enable efficient conjugation of amines and other nucleophiles to unmodified RNA postsynthetically via transient activation of 2'-OH groups. Reaction of single-stranded RNA in aqueous solution with phenolic imidazolecarbamates at room temperature results in stoichiometric and superstoichiometric yields of imidazolecarbonyl group adducts, and control experiments with DNA confirm the site of reaction in RNA as 2'-OH. Subsequent incubation of imidazolecarbonyl-activated RNAs with primary or selected secondary amines results in rapid, high-yield conversion to carbamate conjugates. The activation and subsequent nucleophile reaction can be carried out either stepwise or in a one-pot reaction. Thiols and phenol species react to yield (thio)carbonate adducts, and amino acid sidechains also react, suggesting possible future utility for protein conjugates and analysis of protein-RNA interactions. The activation method is found to be selective to unpaired regions of RNA, and can be directed to a specific location in a strand by use of a loop-inducing helper DNA. The results establish novel and efficient reagents and methods for modifying RNA postsynthetically with nucleophiles.

Post-Synthetic Nucleobase Modification of Oligodeoxynucleotides by Sonogashira Coupling and Influence of Alkynyl Modifications on the Duplex-Forming Ability

Recently, it was reported that the alkynyl modification of nucleobases mitigates the toxicity of antisense oligonucleotides (ASO) while maintaining the efficacy. However, the general effect of alkynyl modifications on the duplex-forming ability of oligonucleotides (ONs) is unclear. In this study, post-synthetic nucleobase modification by Sonogashira coupling in aqueous medium was carried out to efficiently evaluate the physiological properties of various ONs with alkynyl-modified nucleobases. Although several undesired reactions, including nucleobase cyclization, were observed, various types of alkynyl-modified ONs were successfully obtained via Sonogashira coupling of ONs containing iodinated nucleobases. Evaluation of the stability of the duplex formed by the synthesized alkynyl-modified ONs showed that the alkynyl modification of pyrimidine was less tolerated than that of purine, although both the modifications occurred in the major groove of the duplex. These results can be attributed to the bond angle of the alkyne on the pyrimidine and the close proximity of the alkynyl substituents to the phosphodiester backbone. The synthetic method developed in this study may contribute to the screening of the optimal chemical modification of ASO because various alkynyl-modified ONs that are effective in reducing the toxicity of ASO can be easily synthesized by this method.

Non-canonical nucleosides: Biomimetic triphosphorylation, incorporation into mRNA and effects on translation and structure

Recent advances in mRNA therapeutics demand efficient toolkits for the incorporation of nucleoside analogues into mRNA suitable for downstream applications. Herein, we report the application of a versatile enzyme cascade for the triphosphorylation of a broad range of nucleoside analogues, including unprotected nucleobases containing chemically labile moieties. Our biomimetic system was suitable for the preparation of nucleoside triphosphates containing adenosine, cytidine, guanosine, uridine and non-canonical core structures, as determined by capillary electrophoresis coupled to mass spectrometry. This enabled us to establish an efficient workflow for transcribing and purifying functional mRNA containing these nucleoside analogues, combined with mass spectrometric verification of analogue incorporation. Our combined methodology allows for analyses of how incorporation of nucleoside analogues that are commercially unavailable as triphosphates affect mRNA properties: The translational fidelity of the produced mRNA was demonstrated in analyses of how incorporated adenosine analogues impact translational recoding. For the SARS-CoV-2 frameshifting site, analyses of the mRNA pseudoknot structure using circular dichroism spectroscopy allowed insight into how the pharmacologically active 7-deazaadenosine destabilises RNA secondary structure, consistent with observed changes in recoding efficiency.

Fluorescent labeling of RNA and DNA on the Hoogsteen edge using sulfinate chemistry

We have devised a single pot, low-cost method to add azide groups to unmodified nucleic acids without the need for enzymes or chemically modified nucleoside triphosphates. This involves reacting an azide-containing sulfinate salt with the nucleic acid, leading to replacement of C-H bonds on the nucleobase aromatic rings with C-R, where R is the azide-containing linker derived from the original sulfinate salt. With the addition of azide functional groups, the modified nucleic acid can easily be reacted with any alkyne-labeled compound of interest, including fluorescent dyes as shown in this work. This methodology enables the fluorescent labeling of a wide variety of nucleic acids, including natively folded RNAs, under mild conditions with minimal effects upon biochemical function and ribozyme catalysis. To demonstrate this, we show that a pair of labeled complementary ssDNA oligonucleotides (oligos) can hybridize to form dsDNA, even when labeled with multiple fluorophores per oligo. In addition, we also demonstrate that two different group II introns can splice when prelabeled internally with fluorophores, using our method. Broadly, this demonstrates that sulfinate modification of RNA is compatible with ribozyme function and Watson-Crick pairing, while preserving the labile backbone.

Chemical Conversion of 5-Fluoromethyl- and 5-Difluoromethyl-Uracil Bases in Oligonucleotides Using Postsynthetic Modification Strategy

This article describes the postsynthetic modification of oligonucleotides (ONs) containing 2'-deoxy-5-fluoromethyluridine (dU^CH2F ) and 2'-deoxy-5-difluoromethyluridine (dU^CHF2 ). Reactions of fully protected and controlled pore glass (CPG)-attached ONs containing dU^CH2F and dU^CHF2 in basic solutions result in deprotection of all protecting groups except for the 4,4'-dimethoxytrityl group, cleavage from CPG, and conversion of the fluoromethyl or difluoromethyl groups to afford the corresponding ONs containing 5-substituted 2'-deoxyuridines. Moreover, the difluoromethyl group can be converted to formyl, oxime, or hydrazone via the postsynthetic conversion of protection- and CPG-free ON containing dU^CHF2 . © 2023 Wiley Periodicals LLC. Basic Protocol 1: Synthesis of fully protected and CPG-attached oligonucleotides containing 2'-deoxy-5-fluoromethyluridine and 2'-deoxy-5-difluoromethyluridine Basic Protocol 2: Postsynthetic modification of fully protected and CPG-attached oligonucleotides containing 2'-deoxy-5-fluoromethyluridine Basic Protocol 3: Postsynthetic modification of fully protected and CPG-attached oligonucleotide containing 2'-deoxy-5-difluoromethyluridine Basic Protocol 4: Postsynthetic modification of protection- and CPG-free oligonucleotide containing 2'-deoxy-5-difluoromethyluridine Support Protocol: Synthesis of 2'-deoxy-5-fluoromethyluridine and 2'-deoxy-5-difluoromethyluridine phosphoramidites.

Targeted delivery of RNAi to cancer cells using RNA-ligand displaying exosome

Exosome is an excellent vesicle for in vivo delivery of therapeutics, including RNAi and chemical drugs. The extremely high efficiency in cancer regression can partly be attributed to its fusion mechanism in delivering therapeutics to cytosol without endosome trapping. However, being composed of a lipid-bilayer membrane without specific recognition capacity for aimed-cells, the entry into nonspecific cells can lead to potential side-effects and toxicity. Applying engineering approaches for targeting-capacity to deliver therapeutics to specific cells is desirable. Techniques with chemical modification in vitro and genetic engineering in cells have been reported to decorate exosomes with targeting ligands. RNA nanoparticles have been used to harbor tumor-specific ligands displayed on exosome surface. The negative charge reduces nonspecific binding to vital cells with negatively charged lipid-membrane due to the electrostatic repulsion, thus lowering the side-effect and toxicity. In this review, we focus on the uniqueness of RNA nanoparticles for exosome surface display of chemical ligands, small peptides or RNA aptamers, for specific cancer targeting to deliver anticancer therapeutics, highlighting recent advances in targeted delivery of siRNA and miRNA that overcomes the previous RNAi delivery roadblocks. Proper understanding of exosome engineering with RNA nanotechnology promises efficient therapies for a wide range of cancer subtypes.

Modified Nucleotides for Chemical and Enzymatic Synthesis of Therapeutic RNA

In recent years, RNA has emerged as a medium with a broad spectrum of therapeutic potential, however, for years, a group of short RNA fragments was studied and considered therapeutic molecules. In nature, RNA plays both functions, with coding and non-coding potential. For RNA, like any other therapeutic, to be used clinically, certain barriers must be crossed. Among them, there are biocompatibility, relatively low toxicity, bioavailability, increased stability, target efficiency and low off-target effects. In the case of RNA, most of these obstacles can be overcome by incorporating modified nucleotides into its structure. This may be achieved by both, in vitro and in vivo biosynthetic methods, as well as chemical synthesis. Some advantages and disadvantages of each approach are summarized here. The wide range of nucleotide analogues has been tested for their utility as monomers for RNA synthesis. Many of them have been successfully implemented, and a lot of pre-clinical and clinical studies involving modified RNA have been carried out. Some of these medications have already been introduced into clinics. After the huge success of RNA-based vaccines that were introduced into widespread use in 2020, and the introduction to the market of some RNA-based drugs, RNA therapeutics containing modified nucleotides appear to be the future of medicine.

Spin-Labeled Riboswitch Synthesized from a Protected TPA Phosphoramidite Building Block

The nitroxide TPA (2,2,5,5-tetramethyl-pyrrolin-1-oxyl-3-acetylene) is an excellent spin label for EPR studies of RNA. Previous synthetic methods, however, are complicated and require special equipment. Herein, we describe a uridine derived phosphoramidite with a photocaged TPA unit attached. The light sensitive 2-nitrobenzyloxymethyl group can be removed in high yield by short irradiation at 365 nm. Based on this approach, a doubly spin-labeled 27mer neomycin sensing riboswitch was synthesized and studied by PELDOR. The overall thermal stability of the fold is not much reduced by TPA. In-line probing nevertheless detected changes in local mobility.

Paramagnetic Chemical Probes for Studying Biological Macromolecules

Paramagnetic chemical probes have been used in electron paramagnetic resonance (EPR) and nuclear magnetic resonance (NMR) spectroscopy for more than four decades. Recent years witnessed a great increase in the variety of probes for the study of biological macromolecules (proteins, nucleic acids, and oligosaccharides). This Review aims to provide a comprehensive overview of the existing paramagnetic chemical probes, including chemical synthetic approaches, functional properties, and selected applications. Recent developments have seen, in particular, a rapid expansion of the range of lanthanoid probes with anisotropic magnetic susceptibilities for the generation of structural restraints based on residual dipolar couplings and pseudocontact shifts in solution and solid state NMR spectroscopy, mostly for protein studies. Also many new isotropic paramagnetic probes, suitable for NMR measurements of paramagnetic relaxation enhancements, as well as EPR spectroscopic studies (in particular double resonance techniques) have been developed and employed to investigate biological macromolecules. Notwithstanding the large number of reported probes, only few have found broad application and further development of probes for dedicated applications is foreseen.

Overview of Methods for Large-Scale RNA Synthesis

In recent years, it has become clear that RNA molecules are involved in almost all vital cellular processes and pathogenesis of human disorders. The functional diversity of RNA comes from its structural richness. Although composed of only four nucleotides, RNA molecules present a plethora of secondary and tertiary structures critical for intra and intermolecular contacts with other RNAs and ligands (proteins, small metabolites, etc.). In order to fully understand RNA function it is necessary to define its spatial structure. Crystallography, nuclear magnetic resonance and cryogenic electron microscopy have demonstrated considerable success in determining the structures of biologically important RNA molecules. However, these powerful methods require large amounts of sample. Despite their limitations, chemical synthesis and in vitro transcription are usually employed to obtain milligram quantities of RNA for structural studies, delivering simple and effective methods for large-scale production of homogenous samples. The aim of this paper is to provide an overview of methods for large-scale RNA synthesis with emphasis on chemical synthesis and in vitro transcription. We also present our own results of testing the efficiency of these approaches in order to adapt the material acquisition strategy depending on the desired RNA construct.

Structural analysis of an iron-assisted carbon monolayer for delivery of 2-thiouracil

An idea of employing an iron-assisted carbon (FeC) monolayer for delivery of 2-thiouracil (2TU) was examined in this work by analyzing structural features for singular and bimolecular models. Density functional theory (DFT) calculations were performed for optimizing the structures and evaluating molecular and atomic descriptors for analyzing the models systems. Two bimolecular models were obtained assigning by S-FeC and O-FeC models, in which each of S and O atom of 2TU was relaxed towards the Fe region of FeC surface in the mentioned models, respectively. The results indicated that both models were achievable with slightly more favorability for formation of S-FeC model. The obtained molecular orbital properties revealed the dominant role of FeC monolayer for managing future interactions of attached 2TU, which is indeed a major role for employing nanomaterials for targeted drug delivery purposes. In addition to energies and molecular orbital features, atomic quadrupole coupling constants indicated the benefit of employing FeC monolayer for drug delivery of 2TU.

Novel Perspectives towards RNA-Based Nano-Theranostic Approaches for Cancer Management

In the fight against cancer, early diagnosis is critical for effective treatment. Traditional cancer diagnostic technologies, on the other hand, have limitations that make early detection difficult. Therefore, multi-functionalized nanoparticles (NPs) and nano-biosensors have revolutionized the era of cancer diagnosis and treatment for targeted action via attaching specified and biocompatible ligands to target the tissues, which are highly over-expressed in certain types of cancers. Advancements in multi-functionalized NPs can be achieved via modifying molecular genetics to develop personalized and targeted treatments based on RNA interference. Modification in RNA therapies utilized small RNA subunits in the form of small interfering RNAs (siRNA) for overexpressing the specific genes of, most commonly, breast, colon, gastric, cervical, and hepatocellular cancer. RNA-conjugated nanomaterials appear to be the gold standard for preventing various malignant tumors through focused diagnosis and delivering to a specific tissue, resulting in cancer cells going into programmed death. The latest advances in RNA nanotechnology applications for cancer diagnosis and treatment are summarized in this review.

Access to 1'-Amino Carbocyclic Phosphoramidite to Enable Postsynthetic Functionalization of Oligonucleotides

We report a synthesis of a carbocyclic, abasic RNA phosphoramidite decorated with an amino functionality. The building block was efficiently incorporated into an RNA oligonucleotide in a site-specific manner, followed by deprotection to a free amino group. The amino moiety could be further derivatized as exemplified with fluorescein N-hydroxysuccinimide ester. Hence, this convertible building block may provide access to a variety of RNA oligonucleotides via postsynthetic amino group functionalization. In particular, providing a vector toward nucleobase replacements.

A Carbazole-Derived Nitroxide That Is an Analogue of Cytidine: A Rigid Spin Label for DNA and RNA

A variety of semirigid and rigid spin labels comprise a valuable arsenal for measurements of biomolecular structures and dynamics by electron paramagnetic resonance (EPR) spectroscopy. Here, we report the synthesis and characterization of rigid spin labels Ċ and Ċm for DNA and RNA, respectively, that are carbazole-derived nitroxides and analogues of cytidine. Ċ and Ċm were converted to their phosphoramidites and used for their incorporation into oligonucleotides by solid-phase synthesis. Analysis of Ċ and Ċm by single-crystal X-ray crystallography verified their identity and showed little deviation from planarity of the nucleobase. Analysis of the continuous-wave (CW) EPR spectra of the spin-labeled DNA and RNA duplexes confirmed their incorporation into the nucleic acids and the line-shape was characteristic of rigid spin labels. Circular dichroism (CD) and thermal denaturation studies of the Ċ-labeled DNAs and Ċm-labeled RNAs indicated that the labels are nonperturbing of duplex structure.

Cationic oligonucleotide derivatives and conjugates: A favorable approach for enhanced DNA and RNA targeting oligonucleotides

Antisense oligonucleotides (ASOs) have the ability of binding to endogenous nucleic acid targets, thereby inhibiting the gene expression. Although ASOs have great potential in the treatment of many diseases, the search for favorable toxicity profiles and distribution has been challenging and consequently impeded the widespread use of ASOs as conventional medicine. One strategy that has been employed to optimize the delivery profile of ASOs, is the functionalization of ASOs with cationic amine groups, either by direct conjugation onto the sugar, nucleobase or internucleotide linkage. The introduction of these positively charged groups has improved properties like nuclease resistance, increased binding to the nucleic acid target and improved cell uptake for oligonucleotides (ONs) and ASOs. The modifications highlighted in this review are some of the most prevalent cationic amine groups which have been attached as single modifications onto ONs/ASOs. The review has been separated into three sections, nucleobase, sugar and backbone modifications, highlighting what impact the cationic amine groups have on the ONs/ASOs physiochemical and biological properties. Finally, a concluding section has been added, summarizing the important knowledge from the three chapters, and examining the future design for ASOs.

Thermostability, Tunability, and Tenacity of RNA as Rubbery Anionic Polymeric Materials in Nanotechnology and Nanomedicine-Specific Cancer Targeting with Undetectable Toxicity

RNA nanotechnology is the bottom-up self-assembly of nanometer-scale architectures, resembling LEGOs, composed mainly of RNA. The ideal building material should be (1) versatile and controllable in shape and stoichiometry, (2) spontaneously self-assemble, and (3) thermodynamically, chemically, and enzymatically stable with a long shelf life. RNA building blocks exhibit each of the above. RNA is a polynucleic acid, making it a polymer, and its negative-charge prevents nonspecific binding to negatively charged cell membranes. The thermostability makes it suitable for logic gates, resistive memory, sensor set-ups, and NEM devices. RNA can be designed and manipulated with a level of simplicity of DNA while displaying versatile structure and enzyme activity of proteins. RNA can fold into single-stranded loops or bulges to serve as mounting dovetails for intermolecular or domain interactions without external linking dowels. RNA nanoparticles display rubber- and amoeba-like properties and are stretchable and shrinkable through multiple repeats, leading to enhanced tumor targeting and fast renal excretion to reduce toxicities. It was predicted in 2014 that RNA would be the third milestone in pharmaceutical drug development. The recent approval of several RNA drugs and COVID-19 mRNA vaccines by FDA suggests that this milestone is being realized. Here, we review the unique properties of RNA nanotechnology, summarize its recent advancements, describe its distinct attributes inside or outside the body and discuss potential applications in nanotechnology, medicine, and material science.

A Combined Experimental and Computational Study of Halogen and Hydrogen Bonding in Molecular Salts of 5-Bromocytosine

Although natural or artificial modified pyrimidine nucleobases represent important molecules with valuable properties as constituents of DNA and RNA, no systematic analyses of the structural aspects of bromo derivatives of cytosine have appeared so far in the literature. In view of the biochemical and pharmaceutical relevance of these compounds, six different crystals containing proton-transfer derivatives of 5-bromocytosine are prepared and analyzed in the solid-state by single crystal X-ray diffraction. All six compounds are organic salts, with proton transfer occurring to the N_imino atom of the pyridine ring. Experimental results are then complemented with Hirshfeld surface analysis to quantitively evaluate the contribution of different intermolecular interactions in the crystal packing. Furthermore, theoretical calculations, based on different arrangements of molecules extracted from the crystal structure determinations, are carried out to analyze the formation mechanism of halogen bonds (XBs) in these compounds and provide insights into the nature and strength of the observed interactions. The results show that the supramolecular architectures of the six molecular salts involve extensive classical intermolecular hydrogen bonds. However, in all but one proton-transfer adducts, weak to moderate XBs are revealed by C-Br^…O short contacts between the bromine atom in the fifth position, which acts as XB donor (electron acceptor). Moreover, the lone pair electrons of the oxygen atom of adjacent pyrimidine nucleobases and/or counterions or water molecules, which acts as XB acceptor (electron donor).

Amine-to-Azide Conversion on Native RNA via Metal-Free Diazotransfer Opens New Avenues for RNA Manipulations

A major challenge in the field of RNA chemistry is the identification of selective and quantitative conversion reactions on RNA that can be used for tagging and any other RNA tool development. Here, we introduce metal-free diazotransfer on native RNA containing an aliphatic primary amino group using the diazotizing reagent fluorosulfuryl azide (FSO2N3). The reaction provides the corresponding azide-modified RNA in nearly quantitatively yields without affecting the nucleobase amino groups. The obtained azido-RNA can then be further processed utilizing well-established bioortho-gonal reactions, such as azide-alkyne cycloadditions (Click) or Staudinger ligations. We exemplify the robustness of this approach for the synthesis of peptidyl-tRNA mimics and for the pull-down of 3-(3-amino-3-carboxypropyl)uridine (acp3U)- and lysidine (k2C)-containing tRNAs of an Escherichia coli tRNA pool isolated from cellular extracts. Our approach therefore adds a new dimension to the targeted chemical manipulation of diverse RNA species.

Amine-to-Azide Conversion on Native RNA via Metal-Free Diazotransfer Opens New Avenues for RNA Manipulations

A major challenge in the field of RNA chemistry is the identification of selective and quantitative conversion reactions on RNA that can be used for tagging and any other RNA tool development. Here, we introduce metal-free diazotransfer on native RNA containing an aliphatic primary amino group using the diazotizing reagent fluorosulfuryl azide (FSO2 N3 ). The reaction provides the corresponding azide-modified RNA in nearly quantitatively yields without affecting the nucleobase amino groups. The obtained azido-RNA can then be further processed utilizing well-established bioortho-gonal reactions, such as azide-alkyne cycloadditions (Click) or Staudinger ligations. We exemplify the robustness of this approach for the synthesis of peptidyl-tRNA mimics and for the pull-down of 3-(3-amino-3-carboxypropyl)uridine (acp3 U)- and lysidine (k2 C)-containing tRNAs of an Escherichia coli tRNA pool isolated from cellular extracts. Our approach therefore adds a new dimension to the targeted chemical manipulation of diverse RNA species.