A Concise Review on the Physicochemical Properties of Biopolymer Blends Prepared in Ionic Liquids

Ionic Liquids as Reconditioning Agents for Paper Artifacts

This research explores the potential of ionic liquids (ILs) in restoring paper artifacts, particularly an aged book sample. Three distinct ILs-1-ethyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide, 1-methyl-3-pentylimidazolium bis(trifluoromethylsulfonyl)imide, and 1-methyl-3-heptylimidazolium bis(trifluoromethylsulfonyl)imide -both in their pure form and isopropanol mixtures, were examined for their specific consumption in conjunction with paper, with 1-ethyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide displaying the highest absorption. Notably, the methyl-3-heptylimidazolium ionic liquid displayed pronounced deacidification capabilities, elevating the paper pH close to a neutral 7. The treated paper exhibited significant color enhancements, particularly with 1-heptyl-3-methylimidazolium and 1-pentyl-3-methylimidazolium ILs, as evidenced by CIE-Lab* parameters. An exploration of ILs as potential UV stabilizers for paper unveiled promising outcomes, with 1-heptyl-3-methylimidazolium IL demonstrating minimal yellowing post-UV irradiation. FTIR spectra elucidated structural alterations, underscoring the efficacy of ILs in removing small-molecular additives and macromolecules. The study also addressed the preservation of inked artifacts during cleaning, showcasing ILs' ability to solubilize iron gall ink, particularly the one with the 1-ethyl-3-propylimidazolium cation. While exercising caution for prolonged use on inked supports is still recommended, ILs are shown here to be valuable for cleaning ink-stained surfaces, establishing their effectiveness in paper restoration and cultural heritage preservation.

An atomistic scale simulation study of structural properties in the silk-fibrohexamerin complex

The use of Bombyx mori silk fibroin in composite materials has been extensively explored in many studies, owing to its remarkable mechanical properties. Recently, the N-glycan-engineered P25 protein was utilized to improve the mechanical properties of silk. However, the mechanism by which N-glycan-engineered P25 protein enhances the mechanical properties of silk remains unclear. This study analyzed the interaction between the P25 protein and silkworm silk using quantum mechanics/molecular mechanics multiscale simulations and discovered stronger hydrogen bonding between the amorphous domain and the P25 protein. The results confirmed that glycoengineering of the mannose molecule in N-glycan in orders of three, five, and seven increased the hydrogen bonding of the amorphous structures. However, P25 has fewer binding interactions with the crystalline domain. Silk amino acids and mannose molecules were analyzed using QM simulations, and hydroxyl and charged amino acids in the amorphous domains were found to have relatively higher reactivity with mannose molecules in N-glycans than basic and aliphatic amino acids in the crystalline domain. This study demonstrates how the N-glycan-engineered P25 protein can improve the mechanical properties of silk fibroin and identifies a key factor for N-glycan-engineered proteins.

Biodegradable Cellulose/Polycaprolactone/Keratin/Calcium Carbonate Mulch Films Prepared in Imidazolium-Based Ionic Liquid

Ionic liquid 1-butyl-3-methylimidazolium chloride [BMIM][Cl] was used to prepare cellulose (CELL), cellulose/polycaprolactone (CELL/PCL), cellulose/polycaprolactone/keratin (CELL/PCL/KER), and cellulose/polycaprolactone/keratin/ground calcium carbonate (CELL/PCL/KER/GCC) biodegradable mulch films. Attenuated Total Reflectance Fourier-Transform Infrared (ATR-FTIR) spectroscopy, optical microscopy, and Field-Emission Scanning Electron Microscopy (FE-SEM) were used to verify the films' surface chemistry and morphology. Mulch film made of only cellulose regenerated from ionic liquid solution exhibited the highest tensile strength (75.3 ± 2.1 MPa) and modulus of elasticity of 944.4 ± 2.0 MPa. Among samples containing PCL, CELL/PCL/KER/GCC is characterized by the highest tensile strength (15.8 ± 0.4 MPa) and modulus of elasticity (687.5 ± 16.6 MPa). The film's breaking strain decreased for all samples containing PCL upon the addition of KER and KER/GCC. The melting temperature of pure PCL is 62.3 °C, whereas that of CELL/PCL film has a slight tendency for melting point depression (61.0 °C), which is a characteristic of partially miscible polymer blends. Furthermore, Differential Scanning Calorimetry (DSC) analysis revealed that the addition of KER or KER/GCC to CELL/PCL films resulted in an increment in melting temperature from 61.0 to 62.6 and 68.9 °C and an improvement in sample crystallinity by 2.2 and 3.0 times, respectively. The light transmittance of all studied samples was greater than 60%. The reported method for mulch film preparation is green and recyclable ([BMIM][Cl] can be recovered), and the inclusion of KER derived by extraction from waste chicken feathers enables conversion to organic biofertilizer. The findings of this study contribute to sustainable agriculture by providing nutrients that enhance the growth rate of plants, and hence food production, while reducing environmental pressure. The addition of GCC furthermore provides a source of Ca²⁺ for plant micronutrition and a supplementary control of soil pH.

Multifunctional Applications of Ionic Liquids in Polymer Materials: A Brief Review

As a new generation of green media and functional materials, ionic liquids (ILs) have been extensively investigated in scientific and industrial communities, which have found numerous ap-plications in polymeric materials. On the one hand, much of the research has determined that ILs can be applied to modify polymers which use nanofillers such as carbon black, silica, graphene oxide, multi-walled carbon nanotubes, etc., toward the fabrication of high-performance polymer composites. On the other hand, ILs were extensively reported to be utilized to fabricate polymeric materials with improved thermal stability, thermal and electrical conductivity, etc. Despite substantial progress in these areas, summary and discussion of state-of-the-art functionalities and underlying mechanisms of ILs are still inadequate. In this review, a comprehensive introduction of various fillers modified by ILs precedes a systematic summary of the multifunctional applications of ILs in polymeric materials, emphasizing the effect on vulcanization, thermal stability, electrical and thermal conductivity, selective permeability, electromagnetic shielding, piezoresistive sensitivity and electrochemical activity. Overall, this review in this area is intended to provide a fundamental understanding of ILs within a polymer context based on advantages and disadvantages, to help researchers expand ideas on the promising applications of ILs in polymer fabrication with enormous potential.

Valorisation of keratinous wastes: A sustainable approach towards a circular economy

The valorisation of keratinous wastes involves biorefining and recovering the bioresource materials from the keratinous wastes to produce value-added keratin-based bioproducts with a broad application, distribution, and marketability potential. Valorisation of keratinous wastes increases the value of the wastes and enables more sustainable waste management towards a circular bioeconomy. The abundance of keratinous wastes as feedstock from agro-industrial processing, wool processing, and grooming industry benefits biorefinery and extraction of keratins, which could be the optimal solution for developing an ecologically and economically sustainable keratin-based economy. The transition from the current traditional linear models that are deleterious to the environment, which end energy and resources recovery through disposal by incineration and landfilling, to a more sustainable and closed-loop recycling and recovery approach that minimises pollution, disposal challenges, loss of valuable bioresources and potential revenues are required. The paper provides an overview of keratinous wastes and the compositional keratin proteins with the descriptions of the various keratin extraction methods in biorefinery and functional material synthesis, including enzymatic and microbial hydrolysis, chemical hydrolysis (acid/alkaline hydrolysis, dissolution in ionic liquids, oxidative and sulphitolysis) and chemical-free hydrolysis (steam explosion and ultrasonic). The study describes various uses and applications of keratinases and keratin-based composites fabricated through various manufacturing processes such as lyophilisation, compression moulding, solvent casting, hydrogel fabrication, sponge formation, electrospinning, and 3D printing for value-added applications.

Recent Research Progress of Ionic Liquid Dissolving Silks for Biomedicine and Tissue Engineering Applications

Ionic liquids (ILs) show a bright application prospect in the field of biomedicine and energy materials due to their unique recyclable, modifiability, structure of cation and anion adjustability, as well as excellent physical and chemical properties. Dissolving silk fibroin (SF), from different species silkworm cocoons, with ILs is considered an effective new way to obtain biomaterials with highly enhanced/tailored properties, which can significantly overcome the shortcomings of traditional preparation methods, such as the cumbersome, time-consuming and the organic toxicity caused by manufacture. In this paper, the basic structure and properties of SF and the preparation methods of traditional regenerated SF solution are first introduced. Then, the dissolving mechanism and main influencing factors of ILs for SF are expounded, and the fabrication methods, material structure and properties of SF blending with natural biological protein, inorganic matter, synthetic polymer, carbon nanotube and graphene oxide in the ILs solution system are introduced. Additionally, our work summarizes the biomedicine and tissue engineering applications of silk-based materials dissolved through various ILs. Finally, according to the deficiency of ILs for dissolving SF at a high melting point and expensive cost, their further study and future development trend are prospected.

Biopolymer-Based Films from Sodium Alginate and Citrus Pectin Reinforced with SiO2

Blend films based on sodium alginate (SA) and citrus pectin (P) reinforced with different concentrations of SiO₂ (0–10% w/w) were developed in this study. From the morphological (SEM) and structural (FT-IR) evaluation, it was verified that the incorporation of the reinforcing agent did not drastically modify the microstructure of the films, nor did new chemical bonds form. However, the XRD results suggested a slight reduction in the crystallinities of the blends by the incorporation of SiO₂. Among the formulations prepared, the addition of a 5% reinforcing agent was responsible for the simultaneous improvement of mechanical and barrier properties. Comparing the control sample (SA/P) with the SA/P/5.0%SiO₂ film, the tensile strength increased from 27.7 ± 3.7 to 40.6 ± 4.5 MPa, and the water-vapor transmission rate decreased from 319.8 ± 38.7 to 288.9 ± 23.5 g m⁻² day⁻¹. Therefore, SiO_2, as a reinforcing agent in SA/P blends, represents a simple and effective strategy for improving the properties of biopolymer-based films in applications, such as packaging.

Pure Chitosan-Based Fibers Manufactured by a Wet Spinning Lab-Scale Process Using Ionic Liquids

Ionic liquids offer alternative methods for the sustainable processing of natural biopolymers like chitosan. The ionic liquid 1-butyl-3-methylimidazolium acetate (BmimOAc) was successfully used for manufacturing of pure chitosan-based monofilaments by a wet spinning process at lab-scale. Commercial chitosan with 90% deacetylation degree was used for the preparation of spinning dopes with solids content of 4–8 wt.%. Rheology tests were carried out for the characterization of the viscometric properties. BmimOAc was used as a solvent and deionized water as coagulation and washing medium. Optical (scanning electron microscope (SEM), light microscope) and textile physical tests were used for the evaluation of the morphological and mechanical characteristics. The manufactured chitosan monofilaments a homogeneous structure with a diameter of ~150 μm and ~30 tex yarn count. The mechanical tests show tensile strengths of 8 cN/tex at Young’s modulus up to 4.5 GPa. This work represents a principal study for the manufacturing of pure chitosan fibers from ionic liquids and provides basic knowledge for the development of a wet spinning process.

Properties and applications of cellulose regenerated from cellulose/imidazolium-based ionic liquid/co-solvent solutions: A short review

An improvement of ecological conscience currently has increased the consciousness of researchers in reducing the processing time and cost of solvent for the dissolution of cellulose. Latterly, ionic liquids have been employed to process cellulose as they are recyclable and nonvolatile. Besides that, biopolymers such as chitosan, chitin, starch, protein, and cellulose acetate can also be processed by using ionic liquids for diverse applications. In this short review, examples of imidazolium-based ionic liquids that are commonly used for the dissolution of cellulose are implied. Furthermore, examples of organic liquids that are utilized as co-solvents for ionic liquids were revealed. In addition, examples of imidazolium-based ionic liquid/co-solvent mixtures utilized in the dissolution of cellulose and other biopolymers are also demonstrated. The properties and applications of cellulose and its blends regenerated from different types of cellulose/imidazolium-based ionic liquid/co-solvent solutions are also shortly reviewed. The information acquired from this review gives a better understanding of the changes in the properties of regenerated cellulose and regenerated cellulose blends. In addition, this short review serves as a model basis for the creation of novel applications of regenerated cellulose and regenerated cellulose blends by utilizing imidazolium-based ionic liquid/co-solvent mixtures.

Enhancing the Thermal Stability of Ionogels: Synthesis and Properties of Triple Ionic Liquid/Halloysite/MCC Ionogels

In this study, an ionic liquid (IL), 1-butyl-3-methylimidazolium acetate, was used to prepare ionogels with microcrystalline cellulose (MCC) and halloysite (Hal). SEM, XRD, TG, DSC, FTIR spectroscopy, conductometry and mechanical tests were used to study the morphology, structure, thermal behaviour and electrophysical and mechanical characteristics of synthesised ionogels. XRD analysis showed a slight decrease in the interlayer space of halloysite in ionogels containing MCC, which may have been associated with the removal of residual water molecules resulting from hydrophilic IL anions and polymer macromolecules. A change in conductivity and glass-transition temperature of the ionic liquid was revealed due to intercalation into halloysite (a confinement effect) and modification with cellulose. For triple IL/Hal/MCC ionogels, the characteristic thermal degradation temperatures were higher than the corresponding values for IL/Hal composites. This indicates that the synthesised IL/Hal/MCC ionogels are characterised by a greater thermal stability than those of IL/Hal systems.

Jamil SNA, Abdan K. A Brief Review on the Influence of Ionic Liquids on the Mechanical, Thermal, and Chemical Properties of Biodegradable Polymer Composites

Biodegradable polymers are an exceptional class of polymers that can be decomposed by bacteria. They have received significant interest from researchers in several fields. Besides this, biodegradable polymers can also be incorporated with fillers to fabricate biodegradable polymer composites. Recently, a variety of ionic liquids have also been applied in the fabrication of the polymer composites. In this brief review, two types of fillers that are utilized for the fabrication of biodegradable polymer composites, specifically organic fillers and inorganic fillers, are described. Three types of synthetic biodegradable polymers that are commonly used in biodegradable polymer composites, namely polylactic acid (PLA), polybutylene succinate (PBS), and polycaprolactone (PCL), are reviewed as well. Additionally, the influence of two types of ionic liquid, namely alkylimidazolium- and alkylphosphonium-based ionic liquids, on the mechanical, thermal, and chemical properties of the polymer composites, is also briefly reviewed. This review may be beneficial in providing insights into polymer composite investigators by enhancing the properties of biodegradable polymer composites via the employment of ionic liquids.

A Succinct Review on the PVDF/Imidazolium-Based Ionic Liquid Blends and Composites: Preparations, Properties, and Applications

Poly(vinylidene fluoride) (PVDF) is a versatile thermoplastic fluoropolymer with intriguing characteristics, which is receiving considerable attention from researchers in many areas. Recently, PVDF and its copolymer, such as poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) have been blended with ionic liquids to produce blend and composite materials for target applications. In this succinct review, two types of ionic liquids that are utilized for the preparation of PVDF and PVDF-HFP blends and composites, namely, hydrophilic and hydrophobic imidazolium-based ionic liquids, are reviewed. In addition, the effect of the ionic liquids on the physicochemical properties of the PVDF and PVDF-HFP blends and composites, is described as well. On top of that, a multitude of applications of the blends and composites are also succinctly reviewed. This review may give inspirations to the polymer blend and composite researchers in diversifying the applications of thermoplastic fluoropolymers through the utilization of ionic liquids.

Application of Quaternary Ammonium Compounds as Compatibilizers for Polymer Blends and Polymer Composites—A Concise Review

A wide variety of quaternary ammonium compounds (QACs) have escalated the attraction of researchers to explore the application of QACs. The compounds have frequently been synthesized through alkylation or quaternization of tertiary amines with alkyl halides. Recently, QACs have been applied to compatibilize polymer blends and polymer composites in improving their thermo-mechanical properties. This concise review concentrates on the application of two types of QACs as compatibilizers for polymer blends and polymer composites. The types of QACs that were effectively applied in the blends and composites are quaternary ammonium surfactants (QASs) and quaternary ammonium ionic liquids (QAILs). They have been chosen for the discussion because of their unique chemical structure which can interact with the polymer blend and composite components. The influence of QASs and QAILs on the thermo-mechanical properties of the polymer blends and polymer composites is also described. This review could be helpful for the polymer blend and polymer composite researchers and induce more novel ideas in this research area.

Processes and Properties of Ionic Liquid-Modified Nanofiller/Polymer Nanocomposites—A Succinct Review

Ionic liquids can typically be synthesized via protonation, alkylation, metathesis, or neutralization reactions. The many types of ionic liquids have increased their attractiveness to researchers for employment in various areas, including in polymer composites. Recently, ionic liquids have been employed to modify nanofillers for the fabrication of polymer nanocomposites with improved physicochemical properties. In this succinct review, four types of imidazolium-based ionic liquids that are employed as modifiers—specifically alkylimidazolium halide, alkylimidazolium hexafluorophosphate, alkylimidazolium tetrafluoroborate, and alkylimidazolium bistriflimide—are reviewed. Additionally, three types of ionic liquid-modified nanofiller/polymer nanocomposites—namely ionic liquid-nanofiller/thermoplastic nanocomposites, ionic liquid-nanofiller/elastomer nanocomposites, and ionic liquid-nanofiller/thermoset nanocomposites—are described as well. The effect of imidazolium-based ionic liquids on the thermo-mechanico-chemical properties of the polymer nanocomposites is also succinctly reviewed. This review can serve as an initial guide for polymer composite researchers in modifying nanofillers by means of ionic liquids for improving the performance of polymer nanocomposites.