Poly(β-cyclodextrin)-Activated Carbon Gel Composites for Removal of Pesticides from Water

Multifaceted Hydrogel Scaffolds: Bridging the Gap between Biomedical Needs and Environmental Sustainability

Hydrogels are dynamically evolving 3D networks composed of hydrophilic polymer scaffolds with significant applications in the healthcare and environmental sectors. Notably, protein-based hydrogels mimic the extracellular matrix, promoting cell adhesion. Further enhancing cell proliferation within these scaffolds are matrix-metalloproteinase-triggered amino acid motifs. Integration of cell-friendly modules like peptides and proteins expands hydrogel functionality. These exceptional properties position hydrogels for diverse applications, including biomedicine, biosensors, environmental remediation, and the food industry. Despite significant progress, there is ongoing research to optimize hydrogels for biomedical and environmental applications further. Engineering novel hydrogels with favorable characteristics is crucial for regulating tissue architecture and facilitating ecological remediation. This review explores the synthesis, physicochemical properties, and biological implications of various hydrogel types and their extensive applications in biomedicine and environmental sectors. It elaborates on their potential applications, bridging the gap between advancements in the healthcare sector and solutions for environmental issues.

Cyclodextrin-silica hybrid materials: synthesis, characterization, and application in pesticide aqueous removal

Introduction

Overusing and misusing pesticides, including paraquat (PQ), have led to numerous environmental contamination complications. PQ is an emerging bio-accumulative contaminant that is present in environmental aqueous matrices. Adsorption techniques are part of a set of technologies applied in ecological remediation, known for their high effectiveness in removing aqueous PQ. A study of the PQ adsorption capacity of three cyclodextrin-silica nanocomposites (α-CDSi, β-CDSi, and γ-CDSi) from contaminated waters is presented in this paper.

Methods

The cyclodextrin-silica nanocomposites were synthesized via an esterification reaction between the inorganic matrix and cyclodextrins (CDs) (α, β, and γ) and were characterized physicochemically by spectroscopic, thermal, and surface methods. Their PQ removal performance from contaminated aqueous media was studied under different experimental conditions.

Results and Discussion

The results showed a fast adsorptive response in removal treatment studies over time. Adsorption capacities of 87.22, 57.17, and 77.27 mg.g-1 were found for α-CDSi, β-CDSi, and γ-CDSi, respectively, at only 30 min of treatment. Thermodynamic studies indicated spontaneous and exothermic adsorption processes. The removal assays responded mainly to physisorption mechanisms with contributions from chemisorption mechanisms. Spectroscopic assays showed a strong interaction of PQ with the adsorbents used. Innovative CDSi nanocomposites have proven to be highly efficient in applying aqueous PQ remediation, thus proving to be sustainable adsorbents of contaminants of emerging importance worldwide.

Biopolymer-based beads for the adsorptive removal of organic pollutants from wastewater: Current state and future perspectives

Among biopolymer-based adsorbents, composites in the form of beads have shown promising results in terms of high adsorption capacity and ease of separation from the effluents. This review addresses the potential of biopolymer-based beads to remediate wastewaters polluted with emerging organic contaminants, for instance dyes, active pharmaceutical ingredients, pesticides, phenols, oils, polyaromatic hydrocarbons, and polychlorinated biphenyls. High adsorption capacities up to 2541.76 mg g-1 for dyes, 392 mg g-1 for pesticides and phenols, 1890.3 mg g-1 for pharmaceuticals, and 537 g g-1 for oils and organic solvents have been reported. The review also attempted to convey to its readers the significance of wastewater treatment through adsorption by providing an overview on decontamination technologies of organic water contaminants. Various preparation methods of biopolymer-based gel beads and adsorption mechanisms involved in the process of decontamination have been summarized and analyzed. Therefore, we believe there is an urge to discuss the current state of the application of biopolymer-based gel beads for the adsorption of organic pollutants from wastewater and future perspectives in this regard since it is imperative to treat wastewater before releasing into freshwater bodies.

Removal of emergent pollutants: A review on recent updates and future perspectives on polysaccharide-based composites vis-à-vis traditional adsorbents

There is a growing incidence in the presence of emergent pollutants like the pesticides and pharmaceuticals in water bodies. The matter of environmental concern is their synthetic and persistent nature which has resulted in induced toxicity/damaging effect to the vital functioning of the different organs in the aquatic community. Traditional adsorbents have exhibited limitations like low stability and minimum reuse ability. Composites of such adsorbents with polysaccharides have demonstrated distinct features like improved surface area, porosity, adsorptivity; improved reusability and structural integrity; improved mechanical strength, thermal stability when applied for the removal of the emergent pollutants. The biocompatibility and biodegradability of such fabricated composites is established; thereby making the water treatment process cost effective, sustainable and environmentally friendly. The present review has dealt with an in-depth, up-dated literature compilation of traditional as well as polysaccharide based composite adsorbents and addressed their performance evaluation for the removal of pharmaceuticals and pesticides from wastewater. A comparative study has revealed the merits of polysaccharide based composites and discussions have been made with a focus on future research directions in the related area.

Fabrication of β-cyclodextrin-polyacrylamide/covalent organic framework hydrogel at room temperature for the efficient removal of triazole fungicides from environmental water

Triazole is frequently-used fungicide, which can leach into surface water through farmland and cause serious environmental pollution. Continuous exposure to triazole fungicides may cause harm to human health. Herein, β-cyclodextrin-polyacrylamide/covalent organic framework (β-CD-PAAM/TFPB-BD) hydrogel was fabricated at room temperature and used for the efficient removal of triazole fungicides. It displayed a short adsorption equilibrium time (50 min) and a total qe of 79.92 mg g-1. The adsorption process for triazole fungicides on β-CD-PAAM/TFPB-BD hydrogel conforms to the pseudo-second-order kinetic model and Freundlich model. The prepared hydrogel was recyclable and resistant to salt, high temperature, acid, and alkali. The reusability of fabricated sorbent can be achieved (i.e., five extraction cycles) for removal of target fungicides. Moreover, the β-CD-PAAM/TFPB-BD hydrogel was successfully applied to remove triazole fungicides in environmental water with removal efficiency ranging from 79.4% to 99.0%.

Remediation technologies for neonicotinoids in contaminated environments: Current state and future prospects

Neonicotinoids (NEOs) are synthetic insecticides with broad-spectrum insecticidal activity and outstanding efficacy. However, their extensive use and persistence in the environment have resulted in the accumulation and biomagnification of NEOs, posing significant risks to non-target organisms and humans. This review provides a summary of research history, advancements, and highlighted topics in NEOs remediation technologies and mechanisms. Various remediation approaches have been developed, including physiochemical, microbial, and phytoremediation, with microbial and physicochemical remediation being the most extensively studied. Recent advances in physiochemical remediation have led to the development of innovative adsorbents, photocatalysts, and optimized treatment processes. High-efficiency degrading strains with well-characterized metabolic pathways have been successfully isolated and cultured for microbial remediation, while many plant species have shown great potential for phytoremediation. However, significant challenges and gaps remain in this field. Future research should prioritize isolating, domesticating or engineering high efficiency, broad-spectrum microbial strains for NEO degradation, as well as developing synergistic remediation techniques to enhance removal efficiency on multiple NEOs with varying concentrations in different environmental media. Furthermore, a shift from pipe-end treatment to pollution prevention strategies is needed, including the development of green and economically efficient alternatives such as biological insecticides. Integrated remediation technologies and case-specific strategies that can be applied to practical remediation projects need to be developed, along with clarifying NEO degradation mechanisms to improve remediation efficiency. The successful implementation of these strategies will help reduce the negative impact of NEOs on the environment and human health.

Preparation and characterization of activated carbon from agricultural wastes and their ability to remove chlorpyrifos from water

Chlorpyrifos is an organophosphate insecticide linked to neurological dysfunctions, endocrine disturbance, cardiovascular illness, genotoxicity, histopathological abnormalities, immunotoxicity, and oxidative stress. Therefore, the aim of this study was to prepare activated carbon from agricultural waste to adsorb and remove chlorpyrifos from aqueous solutions, as well as to study the physicochemical characteristics of the prepared activated carbon.Activated carbon was prepared from agricultural waste (banana peels, orange peels, pomegranate peels and date stones). The activated carbon prepared showed an exterior surface that was irregular and full of cavities with Brunauer-Emmett-Teller(BET) surface areas of 94.26, 111.75, 183.89, and 289.86 m²/g for activated carbon prepared from orange peels, date stone, pomegranate peels, and banana peels respectively. The Scanning Electron Microscope (SEM) image revealed that the activated carbon's exterior surface was irregular and full of various shapes and sizes of cavities.The Energy Dispersive X-Ray (EDX) indicated the existence of carbon, oxygen, silicon and potassium in banana peels-derived activated carbon, whereas carbon, oxygen, silicon and potassium, in addition to aluminium, were detected in the pomegranate peels-derived activated carbon. The Fourier-Transform Infrared Spectroscopy (FTIR) analysis of prepared activated carbon revealed several functional groups, including carboxylic acid, carbon dioxide, and aromatic compounds. Results also showed that the activated carbon significantly removed chlorpyrifos from water, recording 97.6%, 90.6%, 71.48%, and 52.00 % for activated carbon prepared from pomegranate peels, banana peels, date stones and orange peels, respectively. The study concluded that agricultural waste-derived activated carbon could be employed as an alternative pesticide adsorbent.

Synthesis of β-cyclodextrin-based nanosponges for remediation of 2,4-D polluted waters

Two cyclodextrin-based nanosponges (CD-NSs) were synthesized using diamines with 6 and 12 methylene groups, CDHD6 and CDHD12, respectively, and used as adsorbents to remove 2,4-D from aqueous solutions. The physico-chemical characterization of the CD‒NSs demonstrated that, when using the linker with the longest chain length, the nanosponges show a more compact structure and higher thermal stability, probably due to hydrophobic interactions. SEM micrographs showed significant differences between the two nanosponges used. The adsorption of 2,4-D was assessed in terms of different parameters, including solid/liquid ratio, pH, kinetics and isotherms. Adsorption occurred preferentially at lower pH values and for short-chain crosslinked nanosponges; while the former is explained by the balance of acid-base characteristics of the adsorbent and adsorbate, the latter can be justified by the increase in the crosslinker-crosslinker interactions, predominantly hydrophobic, rather than adsorbent-adsorbate interactions. The maximum adsorption capacity at the equilibrium (q_e) was 20,903 mmol/kg, obtained using CDHD12 with an initial 2,4-D concentration of 2 mmol/L. An environmentally friendly strategy, based on alkali desorption, was developed to recycle and reuse the adsorbents. On the basis of the results obtained, cyclodextrin-based nanosponges appear promising materials for an economically feasible removal of phenoxy herbicides, to be used as potential adsorbents for the sustainable management of agricultural wastewaters.

Cyclodextrin-Based Nanosponges: Overview and Opportunities

Nanosponges are solid cross-linked polymeric nano-sized porous structures. This broad concept involves, among others, metal organic frameworks and hydrogels. The focus of this manuscript is on cyclodextrin-based nanosponges. Cyclodextrins are cyclic oligomers of glucose derived from starch. The combined external hydrophilicity with the internal hydrophobic surface constitute a unique "microenvironment", that confers cyclodextrins the peculiar ability to form inclusion host‒guest complexes with many hydrophobic substances. These complexes may impart beneficial modifications of the properties of guest molecules such as solubility enhancement and stabilization of labile guests. These properties complemented with the possibility of using different crosslinkers and high polymeric surface, make these sponges highly suitable for a large range of applications. Despite that, in the last 2 decades, cyclodextrin-based nanosponges have been developed for pharmaceutical and biomedical applications, taking advantage of the nontoxicity of cyclodextrins towards humans. This paper provides a critical and timely compilation of the contributions involving cyclodextrins nanosponges for those areas, but also paves the way for other important applications, including water and soil remediation and catalysis.

Sustainable materials in the removal of pesticides from contaminated water: Perspective on macro to nanoscale cellulose

Recently, over utilization of pesticides in agrarian and non- agrarian sectors has resulted in a significant increment in the deposition of their remnants in different segments of the environmental media. The presence of pesticides and transportation of their different metabolites in rivers, ponds, lakes, soils, air, groundwater sources and drinkable water sources has demonstrated a high threat to human wellbeing and the climate. Thus, the removal of pesticides and their metabolites from contaminated water is imperative to lessen the ill effects of pesticides on human beings. In the present article, we have appraised recent advances in pesticides removal utilizing low cost pristine and functionalized cellulose biomass-based derivatives. One of the key focus has been on better understand the destiny of pesticides in the environment as well as their behaviour in the water. In addition, the impact of magnetite cellulose nanocomposites, cellulose derived photo nano-catalyst, cellulose/clay nano composites, CdS/cellulose nanocomposites and activated carbons/biochar on percent removal of pesticides have also been a part of the current review. The impact of different parameters such as adsorbent dosage, pH, time of contact and initials pesticide concentration on adsorption capacity and adsorption kinetics followed during absorption by different cellulosic bio-adsorbents has also been given. The cellulosic biomass is highly efficient in the removal of pesticides and their efficiency further increases upon functionalization or their conversion into activated carbons forms. Nano particles loaded cellulosic materials have in general found to be less efficient than raw, functionalized cellulosic materials and activated carbons. Further, among different nano particles loaded with cellulose-based materials, cellulose/MnO₂ photonanocatalyst were noticed to be more effective. So considerable efforts should be given to determine the finest practices that relate to the dissipation of different pesticides from the water.

Pesticide remediation with cyclodextrins: a review

The aim of this review is to highlight and provide an update on the current development of pesticide remediation methods, focusing on the utilization of different cyclodextrin (CD) molecules. Because of less environmental impact and non-toxic nature, CDs are beneficial for pesticide remediation, reducing environmental risk and health hazards. They are advantageous for the removal of pesticides from contaminated areas, as well as for better pesticide formulation and, posing significant effects on the hydrolysis or degradation of pesticides. The review focuses on the current trend and innovations regarding the methods and strategies employed for using CDs in designing pesticide remediation. Nowadays, in addition to the conventional experimental techniques, molecular simulation approaches are significantly contributing to the study of such phenomena and hence are recognized as a widely used tool.

Partially Reduced Graphene Oxide Modified with Polyacrylonitrile for the Removal of Sm3+ from Water

An in situ emulsion polymerization method was used for the synthesis of polyacrylonitrile nanoparticles amino-functionalized partially reduced graphene oxide (PAN-PRGO). After that, hydrolyzed polyacrylonitrile nanoparticles amino-functionalized partially reduced graphene oxide (HPAN-PRGO) nanocomposite was achieved by the modification of nitrile groups of the composite polymer chains to carboxylic groups, aminoethylene diamine, and amidoxime functional groups through partial hydrolysis using a basic solution of sodium hydroxide for 20 min. Different synthesized materials were characterized and compared using well-known techniques including transmission electron microscope (TEM), scanning electron microscope (SEM), Fourier-transform infrared spectroscopy (FT-IR), Raman spectra, and X-ray diffraction (XRD). The nanocomposite was structured through the interaction between acrylonitrile’s (AN) nitrile groups and amino-functionalized graphene oxide nanosheets’ amino groups to successfully graft polyacrylonitrile over the surface of functionalized nanosheets as approved by characterization techniques. The synthesized composite was examined for the removal of samarium ions (Sm3+) from water. Different experimental conditions including pH, contact time, initial concentration, and adsorbent dose were investigated to determine the optimum conditions for the metal capture from water. The optimum conditions were found to be a contact time of 15 min, pH 6, and 0.01 g of adsorbent dosage. The experimental results found, in a good agreement with the Langmuir isotherm model, the maximum adsorption capacity of Sm3+ uptake was equal to 357 mg/g. A regeneration and reusability study of synthesized composite up to six cycles indicated the ability to use HPAN-PRGO nanocomposite several times for Sm3+ uptake. The obtained results prove that this polymer-based composite is a promising adsorbent for water treatment that must be studied for additional pollutants removal in the future.