Recent Advances in the Synthesis and Application of Three-Dimensional Graphene-Based Aerogels

Hybrid and Single-Component Flexible Aerogels for Biomedical Applications: A Review

The inherent disadvantages of traditional non-flexible aerogels, such as high fragility and moisture sensitivity, severely restrict their applications. To address these issues and make the aerogels efficient, especially for advanced medical applications, different techniques have been used to incorporate flexibility in aerogel materials. In recent years, a great boom in flexible aerogels has been observed, which has enabled them to be used in high-tech biomedical applications. The current study comprises a comprehensive review of the preparation techniques of pure polymeric-based hybrid and single-component aerogels and their use in biomedical applications. The biomedical applications of these hybrid aerogels will also be reviewed and discussed, where the flexible polymeric components in the aerogels provide the main contribution. The combination of highly controlled porosity, large internal surfaces, flexibility, and the ability to conform into 3D interconnected structures support versatile properties, which are required for numerous potential medical applications such as tissue engineering; drug delivery reservoir systems; biomedical implants like heart stents, pacemakers, and artificial heart valves; disease diagnosis; and the development of antibacterial materials. The present review also explores the different mechanical, chemical, and physical properties in numerical values, which are most wanted for the fabrication of different materials used in the biomedical fields.

Size Effect of Graphene Oxide on Graphene-Aerogel-Supported Au Catalysts for Electrochemical CO2 Reduction

The lateral size of graphene nanosheets plays a critical role in the properties and microstructure of 3D graphene as well as their application as supports of electrocatalysts for CO2 reduction reactions (CRRs). Here, graphene oxide (GO) nanosheets with different lateral sizes (1.5, 5, and 14 µm) were utilized as building blocks for 3D graphene aerogel (GA) to research the size effects of GO on the CRR performances of 3D Au/GA catalysts. It was found that GO-L (14 µm) led to the formation of GA with large pores and a low surface area and that GO-S (1.5 µm) induced the formation of GA with a thicker wall and isolated pores, which were not conducive to the mass transfer of CO2 or its interaction with catalysts. Au/GA constructed with a suitable-sized GO (5 µm) exhibited a hierarchical porous network and the highest surface area and conductivity. As a result, Au/GA-M exhibited the highest Faradaic efficiency (FE) of CO (FECO = 81%) and CO/H2 ratio at -0.82 V (vs. a Reversible Hydrogen Electrode (RHE)). This study indicates that for 3D GA-supported catalysts, there is a balance between the improvement of conductivity, the adsorption capacity of CO2, and the inhibition of the hydrogen evolution reaction (HER) during the CRR, which is related to the lateral size of GO.

Recent Progress in Multifunctional Graphene-Based Nanocomposites for Photocatalysis and Electrocatalysis Application

The global energy shortage and environmental degradation are two major issues of concern in today's society. The production of renewable energy and the treatment of pollutants are currently the mainstream research directions in the field of photocatalysis. In addition, over the last decade or so, graphene (GR) has been widely used in photocatalysis due to its unique physical and chemical properties, such as its large light-absorption range, high adsorption capacity, large specific surface area, and excellent electronic conductivity. Here, we first introduce the unique properties of graphene, such as its high specific surface area, chemical stability, etc. Then, the basic principles of photocatalytic hydrolysis, pollutant degradation, and the photocatalytic reduction of CO₂ are summarized. We then give an overview of the optimization strategies for graphene-based photocatalysis and the latest advances in its application. Finally, we present challenges and perspectives for graphene-based applications in this field in light of recent developments.

Characterization of Phase Change Materials Fabricated with Cross-Linked Graphene Aerogels

3D porous graphene aerogel exhibits a high surface area which can hold plenty of pure phase change material (PCM) into the internal space. In order to maintain the flexibility of PCM without volume shrinkage under the external force, cross-linked graphene aerogel was prepared by the cysteamine vapor method. The cross-linked graphene aerogel had a high stress–strain durability and chemical stability for infiltrating PCM to produce a form-stable PCM composite. The latent heat of PCM is one of the elements to estimate the capacity of PCM thermal energy storage (TES) during the phase transition process. The cross-linked graphene aerogel-supported PCM composite showed a great TES to be utilized in thermal-to-electrical energy harvesting. The cross-linked graphene aerogel also had an excellent mechanical property of preventing damage at a high temperature.

Magnetic CuFe2O4 Nanoparticles with Pseudocapacitive Properties for Electrical Energy Storage

This investigation is motivated by increasing interest in the development of magnetically ordered pseudocapacitors (MOPC), which exhibit interesting magnetocapacitive effects. Here, advanced pseudocapacitive properties of magnetic CuFe₂O₄ nanoparticles in negative potential range are reported, suggesting that CuFe₂O₄ is a promising MOPC and advanced negative electrode material for supercapacitors. A high capacitance of 2.76 F cm^-2 is achieved at a low electrode resistance in a relatively large potential window of 0.8 V. The cyclic voltammograms and galvanostatic charge-discharge data show nearly ideal pseudocapacitive behavior. Good electrochemical performance is achieved at a high active mass loading due to the use of chelating molecules of ammonium salt of purpuric acid (ASPA) as a co-dispersant for CuFe₂O₄ nanoparticles and conductive multiwalled carbon nanotube (MCNT) additives. The adsorption of ASPA on different materials is linked to structural features of ASPA, which allows for different interaction and adsorption mechanisms. The combination of advanced magnetic and pseudocapacitive properties in a negative potential range in a single MOPC material provides a platform for various effects related to the influence of pseudocapacitive/magnetic properties on magnetic/pseudocapacitive behavior.

Highly Elastic Melamine Graphene/MWNT Hybrid Sponge for Sensor Applications

The rapidly increased interest in multifunctional nanoelectronic devices, such as wearable monitors, smart robots, and electronic skin, motivated many researchers toward the development of several kinds of sensors in recent years. Flexibility, stability, sensitivity, and low cost are the most important demands for exploiting stretchable or compressible strain sensors. This article describes the formation and characteristics of a flexible, low-cost strain sensor by combining a commercial melamine sponge and a graphene/carbon nanotubes hybrid. The composite that emerged by doping the highly elastic melamine sponge with a highly conductive graphene/carbon nanotubes hybrid showed excellent piezoresistive behavior, with low resistivity of 22 kΩ m. Its function as a piezoresistive material exhibited a high sensitivity of 0.050 kPa⁻¹ that combined with a wide detection area ranging between 0 to 50 kPa.