Silica Meets Tannic Acid: Designing Green Nanoplatforms for Environment Preservation

Surface Functionalization of Bamboo via Photo-Grafting Tannic Acid for Enhanced Silver Ion Loading Properties

Photo-grafting is a gentle, simple, and precise approach to incorporating specific functional molecules for the surface functionalization of substrates. In this work, ultraviolet (UV)-induced tannic acid (TA) grafting onto the surface of bamboo was proposed as a viable strategy for functionalizing bamboo. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) clearly indicated that TA was successfully introduced to the bamboo's surface. The optimal conditions for the grafting reaction were determined to be 15 mM Methyl-2-benzoylbenzoate (BB), 30 mM TA, 20 min, and a pH = 8. Under these conditions, the amount of TA grafted onto the bamboo's surface was measured to be 19.98 μg/cm2. Results from Inductively Coupled Plasma (ICP) and Energy Dispersive Spectrometer (EDS) analyses showed that the silver ion loading capacity of tannic acid-grafted bamboo was significantly improved compared to that of raw bamboo and tannic acid-impregnated bamboo. Furthermore, the presence of TA grafted on the bamboo's surface exhibited a positive correlation with the loading of silver ions, indicating that grafted TA plays an important role in the surface functionalization of bamboo. We believe that photo-grafted TA may help generate multifunctional bamboo with diverse properties.

Photocatalytic Degradation of Crystal Violet Dye under Visible Light by Fe-Doped TiO2 Prepared by Reverse-Micelle Sol-Gel Method

A reverse-micelle sol-gel method was chosen for the preparation of Fe-doped TiO₂ samples that were employed in the photodegradation of the crystal violet dye under visible light irradiation in a batch reactor. The dopant amount was varied to assess the optimal photocatalyst composition towards the target dye degradation. The photocatalysts were characterized through a multi-technique approach, envisaging XRPD and QPA as obtained by Rietveld refinement, FE-SEM analysis, DR UV-vis spectroscopy, N₂ adsorption/desorption isotherms measurement at -196 °C, ζ-potential measurement, and XPS analysis. The physical-chemical characterization showed that the adopted synthesis method allows obtaining NPs with uniform shape and size and promotes the introduction of Fe into the titania matrix, finally affecting the relative amounts of the three occurring polymorphs of TiO₂ (anatase, rutile and brookite). By increasing the Fe content, the band gap energy decreases from 3.13 eV (with undoped TiO₂) to 2.65 eV (with both 2.5 and 3.5 wt.% nominal Fe contents). At higher Fe content, surface Fe oxo-hydroxide species occur, as shown by DR UV-vis and XP spectroscopies. All the Fe-doped TiO₂ photocatalysts were active in the degradation and mineralization of the target dye, showing a TOC removal higher than the undoped sample. The photoactivity under visible light was ascribed both to the band-gap reduction (as confirmed by phenol photodegradation) and to dye sensitization of the photocatalyst surface (as confirmed by photocatalytic tests carried out using different visible-emission spectra LEDs). The main reactive species involved in the dye degradation were determined to be positive holes.

Tannic Acid as a Versatile Template for Silica Monoliths Engineering with Catalytic Gold and Silver Nanoparticles

Tannic acid in alkaline solutions in which sol-gel synthesis is usually performed with tetraethoxysilane is susceptible to various modifications, including formation of reactive radicals, oxidation under the action of atmospheric oxygen, self-association, and self-polymerization. Here, a precursor with ethylene glycol residues instead of ethanol was used, which made it possible to synthesize bionanocomposites of tannic acid and silica in one stage in neutral media under normal conditions without the addition of acid/alkali and organic solvents. Silica was fabricated in the form of optically transparent monoliths of various shapes with 2-4 nm pores, the radius of which well correlated with the size of a tannic acid macromolecule in a non-aggregated state. Polyphenol, which was remained in pores of silica matrix, served then as reducing agent to synthesize in situ gold and silver nanoparticles. As shown, these Au@SiO₂ and Ag@SiO₂ nanocomposites possessed localized surface plasmon resonance and high catalytic activity.

Preparation of tannic acid and L-cysteine functionalized magnetic composites for synergistic enrichment of N-glycopeptides followed by mass spectrometric analysis

Glycoprotein is involved in a variety of biological activities and has been linked to a number of diseases. Glycopeptide enrichment prior to mass spectrometry (MS) detection is crucial to reduce interference, improve detection efficiency, and analyze proteomics deeply and comprehensively. Here, we prepared a novel magnetic hydrophilic material combining tannic acid (TA) and L-cysteine (L-Cys) through a simple and fast procedure. Owing to the synergistic hydrophilic interaction of TA and L-Cys, the obtained adsorbent material shows excellent enrichment performance toward N-glycopeptides with low detection limit, high selectivity, and good reusability. Besides, the material can also be utilized for the enrichment of N-glycopeptides in human serum and saliva, which shows its application prospect in complex biological samples.

Shall We Tune? From Core-Shell to Cloud Type Nanostructures in Heparin/Silica Hybrids

Heparin plays multiple biological roles depending on the availability of active sites strongly influenced by the conformation and the structure of polysaccharide chains. Combining different components at the molecular scale offers an extraordinary chance to easily tune the structural organization of heparin required for exploring new potential applications. In fact, the combination of different material types leads to challenges that cannot be achieved by each single component. In this study, hybrid heparin/silica nanoparticles were synthesized, and the role of silica as a templating agent for heparin supramolecular organization was investigated. The effect of synthesis parameters on particles compositions was deeply investigated by Fourier Transform Infrared Spectroscopy (FTIR) and Thermogravimetric Analysis (TGA). Transmission Electron Microscopy (TEM) reveals a different supramolecular organization of both components, leading to amazing organic-inorganic nanoparticles with different behavior in drug encapsulation and release. Furthermore, favorable biocompatibility for healthy human dermal fibroblasts (HDF) and tumor HS578T cells has been assessed, and a different biological behavior was observed, ascribed to different surface charge and morphology of synthesized nanoparticles.