Application of Photocatalysis and Sonocatalysis for Treatment of Organic Dye Wastewater and the Synergistic Effect of Ultrasound and Light

Metallic nanoparticles unveiled: Synthesis, characterization, and their environmental, medicinal, and agricultural applications

Metallic nanoparticles (MNPs) have attracted great interest among scientists and researchers for years due to their unique optical, physiochemical, biological, and magnetic properties. As a result, MNPs have been widely utilized across a variety of scientific fields, including biomedicine, agriculture, electronics, food, cosmetics, and the environment. In this regard, the current review article offers a comprehensive overview of recent studies on the synthesis of MNPs (metal and metal oxide nanoparticles), outlining the benefits and drawbacks of chemical, physical, and biological methods. However, the biological synthesis of MNPs is of great importance considering the biocompatibility and biological activity of certain MNPs. A variety of characterization techniques, including X-ray diffraction, transmission electron microscopy, UV-visible spectroscopy, scanning electron microscopy, dynamic light scattering, atomic force microscopy, Fourier transform infrared spectroscopy, and others, have been discussed in depth to gain deeper insights into the unique structural and spectroscopic properties of MNPs. Furthermore, their unique properties and applications in the fields of medicine, agriculture, and the environment are summarized and deeply discussed. Finally, the main challenges and limitations of MNPs synthesis and applications, as well as their future prospects have also been discussed.

Hybridization of Polymer-Encapsulated MoS2-ZnO Nanostructures as Organic-Inorganic Polymer Films for Sonocatalytic-Induced Dye Degradation

The development of environmentally friendly technology is vital to effectively address the issues related to environmental deterioration. This work integrates ZnO-decorated MoS2 (MZ) to create a high-performing PVDF-based PVDF/MoS2-ZnO (PMZ) hybrid polymer composite film for sonocatalytic organic pollutant degradation. An efficient synergistic combination of MZ was identified by altering the ratio, and its influence on PVDF was assessed using diverse structural, morphological, and sonocatalytic performances. The PMZ film demonstrated very effective sonocatalytic characteristics by degrading rhodamine B (RhB) dye with a degradation efficiency of 97.23%, whereas PVDF only degraded 17.7%. Combining MoS2 and ZnO reduces electron-hole recombination and increases the sonocatalytic degradation performance. Moreover, an ideal piezoelectric PVDF polymer with MZ enhances polarization to improve redox processes and dye degradation, ultimately increasing the degradation efficiency. The degradation efficiency of RhB was seen to decrease while employing isopropanol (IPA) and p-benzoquinone (BQ) due to the presence of reactive oxygen species. This suggests that the active species •O2- and •OH are primarily responsible for the degradation of RhB utilizing PMZ2 film. The PMZ film exhibited improved reusability without substantially decreasing its catalytic activity. The superior embellishment of ZnO onto MoS2 and effective integration of MZ into the PVDF polymer film results in improved degrading performance.

Sonophotocatalytic degradation of sulfamethoxazole using lanthanum ferrite perovskite oxide anchored on an ultrasonically exfoliated porous graphitic carbon nitride nanosheet

The lanthanum ferrite perovskite (La0.8FO) was synthesized using a citric combustion route and then modified with a porous graphitic nitride nanosheet via the wet impregnation-assisted ultrasonic method to produce La0.8FO@PgNS. Various techniques such as Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX) spectroscopy, X-ray photoelectron spectroscopy (XPS), ultraviolet diffuse reflectance spectroscopy (UV-DRS), and Tauc plot analysis were employed to confirm the functional moieties, crystallinity, phase change, morphology, composition, and bandgap of La.0.8FO and La0.8FO@PgNS. La0.8FO and La0.8FO@PgNS were used for the sonophotocatalytic oxidative degradation of sulfamethoxazole (SMX) under low energy and ultrasound wave frequency in the presence of visible light. La0.8FO and La0.8FO@PgNS exhibited a sonophotocatalytic degradation capacity of 52.06 and 99.60%, respectively. Furthermore, the rate constant at the optimum condition of pH 7 and 5 mg L-1 concentration was 0.01343 and 0.01494 min-1 for La0.8FO and La0.8FO@PgNS, respectively. The integration of sonolysis and photocatalysis in the remediation process of SMX resulted in a synergy of 2.5-fold. Ultrasonic waves and hydroxyl and superoxide radicals are the main species governing the degradation process while La0.8FO@PgNS was stable over 8 cycles, proving to be a sustainable material for environmental remediation.

Ultrasonic cavitation: Tackling organic pollutants in wastewater

Environmental pollution and energy shortages are global issues that significantly impact human progress. Multiple methods have been proposed for treating industrial and dyes containing wastewater. Ultrasonic degradation has emerged as a promising and innovative technology for organic pollutant degradation. This study provides a comprehensive overview of the factors affecting ultrasonic degradation and thoroughly examines the technique of acoustic cavitation. Furthermore, this study summarizes the fundamental theories and mechanisms underlying cavitation, emphasizing its efficacy in the remediation of various water pollutants. Furthermore, potential synergies between ultrasonic cavitation and other commonly used technologies are also explored. Potential challenges are identified and future directions for the development of ultrasonic degradation and ultrasonic cavitation technologies are outlined.

Efficient Photocatalytic Luminous Textile for Simulated Real Water Purification: Advancing Economical and Compact Reactors

The growing worldwide problem of wastewater management needs sustainable methods for conserving water supplies while addressing environmental and economic considerations. With the depletion of freshwater supplies, wastewater treatment has become critical. An effective solution is needed to efficiently treat the organic contaminants departing from wastewater treatment plants (WWTPs). Photocatalysis appears to be a viable method for eliminating these recalcitrant micropollutants. This study is focused on the degradation of Reactive Black 5 (RB5), a typical contaminant from textile waste, using a photocatalytic method. Titanium dioxide (TiO2) was deposited on a novel luminous fabric and illuminated using a light-emitting diode (LED). The pollutant degrading efficiency was evaluated for two different light sources: (i) a UV lamp as an external light source and (ii) a cold LED. Interestingly, the LED UV source design showed more promising results after thorough testing at various light levels. In fact, we note a 50% increase in mineralization rate when we triple the number of luminous tissues in the same volume of reactor, which showed a clear improvement with an increase in compactness.

Capability of TiO2 and Fe3O4 nanoparticles loaded onto Algae (Scendesmus sp.) as a novel bio-magnetic photocatalyst to degration of Red195 dye in the sonophotocatalytic treatment process under ultrasonic/UVA irradiation

In this study, the magnetic photocatalyst Scendesmus/Fe3O4/TiO2 was synthesized, and its sonophotocatalytic properties in relation to the degradation of the Red195 dye were evaluated. Particles were characterized using a scanning electron microscope (SEM), Fourier's transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), and a vibrating-sample magnetometer (VSM). At a pH of 5, a photocatalyst dosage of 100 mg, an initial R195 concentration of 100 mg/l, an ultrasound power of 38W, and an exposure time of 20 min, the maximum Red195 removal efficiency (100%) was achieved. After five cycles of recycling, the composite's sonophotocatalytic degradation stability for R195 remains above 95%. Experiments on scavenging indicate that electrons (h+) and hydroxyls (OH-) are indispensable decomposition agents. The removal of R195 by Scendesmus/Fe3O4/TiO2 is consistent with the pseudo-first-order kinetic, Freundlich, and Henderson's isotherm models, as determined by kinetic and isotherm investigations. The negative activation enthalpy of the standard (ΔH°) illuminates the exothermic adsorption mechanism. The increase in standard Gibbs activation free energy (ΔG°) with increasing temperature reveals the process is not spontaneous. As indicated by the negative value of the standard entropy of activation (ΔS°), activation of the reactants resulted in a loss of freedom.

Advances on sonophotocatalysis as a water and wastewater treatment technique: efficiency, challenges and process optimisation

Due to water shortage and increased water pollution, various methods are being explored to improve water quality by treating contaminants. Sonophotocatalysis is a combination of two individual water treatment processes i.e., photocatalysis and sonocatalysis. With advantages including shorter reaction times and enhanced activity, this technique shows possible futuristic applications as an efficient water treatment technology. Herein, background insight on sonophotocalysis as a water and wastewater treatment technique as well as the general mechanism of activity is explained. The commonly used catalysts for sonophotocatalytic applications as well as their synthesis pathways are also briefly discussed. Additionally, the utilisation of sonophotocatalysis for the disinfection of various microbial species as well as treatment of wastewater pollutants including organic (dyes, pharmaceuticals and pesticides) and inorganic species (heavy metals) is deliberated. This review also gives a critical analysis of the efficiency, enhancement strategies as well as challenges and outlooks in this field. It is thus intended to give insight to researchers in the context of facilitating future developments in the field of water treatment, and advancing sonophotocatalysis towards large-scale implementation and commercialization.

Catalytic Decomposition of H2O2 in the Aqueous Dispersions of the Potassium Polytitanates Produced in Different Conditions of Molten Salt Synthesis

It is shown that the potassium polytitanate powder (PPT) synthesized at 500 °C via the treatment of powdered TiO₂ (rutile) in molten mixtures of KOH and KNO₃ is a cheap and effective catalyst of H₂O₂ chemical decomposition in aqueous solutions. At the same time, the PPT catalytic activity strongly depends on the [TiO₂]:[KOH]:[KNO₃] weight ratio in the mixture used for the synthesis, increasing with [KNO₃] in the order of PPT (30:30:40) < PPT (30:50:20) < PPT (30:70:0). The obtained results are explained by increased [Ti³⁺] in the PPT structure (XPS data), which is grown in this order from 0 to 4.0 and 21.9 at.%, respectively, due to the reduced oxidation activity of the melt used for PPT synthesis. The mechanism of the autocatalytic process taking place in the PPT-H₂O₂-H₂O system is analyzed. Taking into account the data of FT-IR spectroscopy, it is assumed that the increased catalytic activity of the investigated materials is related to the increased surface concentration of the Ti⁴⁺-O(H)-Ti⁴⁺ groups, formed from the Ti³⁺-O(H₃O⁺)-Ti⁴⁺ clusters and further transformed into Ti-O-O-H catalytic centers. Some possible applications of the PPT-H₂O₂-H₂O catalytic system, including the oxidation processes of green chemistry and photo-catalysis, are discussed.

Applications of Catalytic Nanomaterials in Energy and Environment

Nanotechnology is a crucial technology for the development of science and technology [...].