Advancements in Preprocessing and Analysis of Nitrite and Nitrate since 2010 in Biological Samples: A Review

A novel electrochemical sensor with NiSx@MoS2 composite for efficient NO2- sensing

Excess nitrites are potentially threatening to human health, so it is urgent to develop accurate and sensitive methods. The development of sensors can provide early warning of possible hazards and alert people to protect public health. This work presents an NiSx@MoS2-composite with excellent electrochemical activity, representing a key finding for highly sensitive NO2- detection and sensor development. With the assistance of NiSx@MoS2, this electrochemical sensor has excellent quantitative detection performance. It has a wide detection range (0.0001-0.0020 mg/mL) and a low detection limit (1.863*10-5 mg/mL) for NO2-. This electrochemical sensor maintains excellent specificity among numerous interferences, and it completes the accurate detection of different real food samples. Pleasingly, the electrochemical sensor has satisfactory repeatability stability, and potential for practical applications. It would demonstrate tremendous potential in scientific dietary guidance, food safety detection and other fields.

Simultaneous separation and detection of monochloramine, nitrite, and nitrate by step-gradient mixed-mode ion chromatography: Translation from benchtop to portable ion chromatograph

BACKGROUND

Nitrite (NO2-) and nitrate (NO3-) can be produced in the distribution systems of chloraminated drinking water due to the nitrification of ammonia. The most applied inorganic chloramine for this purpose, namely monochloramine (NH2Cl), is also released into aquatic environments from water treatment plants' effluent and within industrial waste streams. Within the treatment process, the continuous monitoring of disinfectant levels is necessary to limit the harmful disinfectant by-product (DBP) formation. Currently, NH2Cl can interfere with nutrient analysis in water samples, and there are no analytical techniques available for the simultaneous analysis of NH2Cl, NO2-, and NO3-.

RESULTS

A green analytical method based on mixed-mode ion chromatography, specifically ion exchange and ion exclusion modes, was developed for the simultaneous separation and detection of NH2Cl, NO2-, and NO3-. The separation was achieved using a Dionex IonPac AG15 column guard column and a step gradient elution involving deionized water and 120.0 mM NaCl. The method was developed using a benchtop HPLC with a custom-made multi-wavelength UV absorbance detector with a 50-mm flow cell to enable the sensitive detection of NH2Cl, NO2-, and NO3- at 240 nm, 220 nm, and 215 nm, respectively. The developed method was then transferred to a portable ion chromatography (IC) system, the Aquamonitrix analyser. The total run time was less than 10 min for both systems. The benchtop HPLC method had a limit of detection (LOD) of 0.07 μg mL-1 as Cl2 for NH2Cl, 0.01 μg mL-1 for NO2-, and 0.03 μg mL-1 for NO3-. The LODs obtained using the portable Aquamonitrix analyser were found to be 0.36 μg mL-1 as Cl2, 0.02 μg mL-1, and 0.11 μg mL-1 for NH2Cl, NO2-, and NO3-, respectively. Excellent linearity (r ≥ 0.9999) was achieved using the portable analyser over the studied concentration ranges. The developed system was applied to the analysis of spiked municipal drinking water samples and showed excellent repeatability for the three analytes at three different concentration levels (RSD of triplicate recovery experiments ≤ 1.9 %). Moreover, the variation in retention time was negligible for the three target analytes with RSD ≤ 0.8 % over 12 runs.

SIGNIFICANCE

We are reporting the first ion chromatographic method for the simultaneous separation and detection of NH2Cl, NO2-, and NO3- in water samples. The monitoring of NH2Cl, NO2-, and NO3- is critical for the determination of disinfectant dosing, water quality, and nitrification status. The developed method can be applied using a benchtop HPLC or via the portable automated IC system to monitor for the three target compounds analysis in water treatment plants.

Methane emission from water level fluctuation zone of the Three Gorges Reservoir: Seasonal variation and microbial mechanism

Periodic and significant water level fluctuations within the Three Gorges Reservoir (TGR) create a complex water level fluctuation zone (WLFZ) that can significantly influence greenhouse gas emissions. However, the scarcity of comprehensive studies investigating long-term monitoring and analysis of CH4 flux patterns and underlying mechanisms concerning water level variations, environmental characteristics, and microbial communities has limited our understanding. This study conducted a four-year monitoring campaign to examine in situ CH4 emissions from three representative sampling sites. Results indicated that the CH4 flux remained relatively stable at lower water levels, specifically at the control site (S1). However, water level fluctuations significantly influenced CH4 emissions at the sampling sites situated within the WLFZ. Notably, the highest CH4 flux of 0.252 ± 0.089 mg/(m2·h) was observed during the drying period (June to August), while the lowest CH4 flux of 0.048 ± 0.026 mg/(m2·h) was recorded during the flooding period. Moreover, CH4 emissions through the water-air interface surpassed those through the soil-air interface. The CH4 flux positively correlated with organic carbon, temperature, and soil moisture. The relative abundance of methane metabolism microorganisms peaked during the drying period and decreased during the impounding and flooding periods. The primary methanogenesis pathway was hydrogenotrophic, whereas methanotrophic processes were mainly aerobic, with Ca. Methylomirabilis governing the anaerobic methanotrophic process. Overall, the current findings serve as crucial theoretical references for understanding CH4 emissions and carbon metabolism processes within WLFZ environments.