Receptor model-based sources and risk assessment of metals in sediment of the coastal construction-oriented aquatic system in Bangladesh

Metal pollution in sediment from construction areas raises ecological and health concerns, yet source-based sediment pollution in Bangladesh remains understudied. Our investigation focused on fifteen locations in the Kohelia River and the coastal regions near the Matarbari projects (Matarbari Power Plant, Matarbari Deep Seaport), assessing metal concentrations' sources and impacts on ecology and human well-being. Sediment quality indices indicated high Cd and Cr contamination, with sites near Matarbari projects being the most polluted. The positive matrix factorization model identified three anthropogenic sources and mixed sources. Matarbari projects contributed significantly to As (67.9 %), Mn (50.25 %), Cd (48.35 %), and Cr (41.0 %), while ship-breaking yards contributed Fe (58.0 %), Zn (55.5 %), Pb (53.8 %), and Cu (36.1 %). Ecological indices showed different impacts on aquatic life from metal pollution, but cancer risk levels stayed below the threshold set by the US Environmental Protection Agency. These findings underscore the need for targeted measures to address metal pollution.

Molecular transformation of dissolved organic matter in manganese ore-mediated constructed wetlands for fresh leachate treatment

The organic matter (OM) and nitrogen in Fresh leachate (FL) from waste compression sites pose environmental and health risks. Even though the constructed wetland (CW) can efficiently remove these pollutants, the molecular-level transformations of dissolved OM (DOM) in FL remain uncertain. This study reports the molecular dynamics of DOM and nitrogen removal during FL treatment in CWs. Two lab-scale vertical-flow CW systems were employed: one using only sand as substrates (act as a control, CW-C) and the other employing an equal mixture of manganese ore powder and sand (experimental, CW-M). Over 488 days of operation, CW-M exhibited significantly higher removal rates for chemical oxygen demand (COD), ammonia nitrogen (NH4+-N), and dissolved organic matter (represented by dissolved organic carbon, DOC) at 98.2 ± 2.5%, 99.2 ± 1.4%, and 97.9 ± 1.9%, respectively, in contrast to CW-C (92.8 ± 6.8%, 77.1 ± 28.1%, and 74.7 ± 9.5%). The three-dimensional fluorescence excitation-emission matrix (3D-EEM) and Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) analyses unveiled that the influent DOM was predominantly composed of readily biodegradable protein-like substances with high carbon content and low unsaturation. Throughout treatment, it led to the degradation of low O/C and high H/C compounds, resulting in the formation of DOM with higher unsaturation and aromaticity, resembling humic-like substances. CW-M showcased a distinct DOM composition, characterized by lower carbon content yet higher unsaturation and aromaticity than CW-C. The study also identified the presence of Gammaproteobacteria, reported as Mn-oxidizing bacteria with significantly higher abundance in the upper and middle layers of CW-M, facilitating manganese cycling and improving DOM removal. Key pathways contributing to DOM removal encompassed adsorption, catalytic oxidation by manganese oxides, and microbial degradation. This study offers novel insights into DOM transformation and removal from FL during CW treatment, which will facilitate better design and enhanced performance.

Methane emission from water level fluctuation zone of the Three Gorges Reservoir: Seasonal variation and microbial mechanism

Periodic and significant water level fluctuations within the Three Gorges Reservoir (TGR) create a complex water level fluctuation zone (WLFZ) that can significantly influence greenhouse gas emissions. However, the scarcity of comprehensive studies investigating long-term monitoring and analysis of CH4 flux patterns and underlying mechanisms concerning water level variations, environmental characteristics, and microbial communities has limited our understanding. This study conducted a four-year monitoring campaign to examine in situ CH4 emissions from three representative sampling sites. Results indicated that the CH4 flux remained relatively stable at lower water levels, specifically at the control site (S1). However, water level fluctuations significantly influenced CH4 emissions at the sampling sites situated within the WLFZ. Notably, the highest CH4 flux of 0.252 ± 0.089 mg/(m2·h) was observed during the drying period (June to August), while the lowest CH4 flux of 0.048 ± 0.026 mg/(m2·h) was recorded during the flooding period. Moreover, CH4 emissions through the water-air interface surpassed those through the soil-air interface. The CH4 flux positively correlated with organic carbon, temperature, and soil moisture. The relative abundance of methane metabolism microorganisms peaked during the drying period and decreased during the impounding and flooding periods. The primary methanogenesis pathway was hydrogenotrophic, whereas methanotrophic processes were mainly aerobic, with Ca. Methylomirabilis governing the anaerobic methanotrophic process. Overall, the current findings serve as crucial theoretical references for understanding CH4 emissions and carbon metabolism processes within WLFZ environments.

Polystyrene microplastics accumulation in lab-scale vertical flow constructed wetlands: impacts and fate

Microplastics (MPs) are ubiquitous pollutants that significantly threaten organisms and ecosystems. Constructed wetlands (CWs), a nature-based treatment technology, can effectively remove MPs from wastewater. However, the responses of CWs when exposed to MPs remain unclear. In this study, lab-scale vertical flow constructed wetlands (VFCWs) were installed for receiving polystyrene (PS) MPs at concentrations of 100 μg/L and 1000 μg/L. The results showed that exposure to PS-MPs has no effects on COD and TP removal in VFCWs, but TN removal decreased by 3.69-5.37 %. Further investigation revealed that PS-MPs significantly impacted microbial communities and metabolic functions. The abundances of predominant nitrifiers (Nitrospira and Nitrosomonas) and denitrifiers (Nakamurella, Bradyrhizobium, and Bacillus) in VFCWs were significantly reduced, aligning with the responses of key enzymes. The presence of PS-MPs also decreased nitrogen removal by plant uptake, leading to decreased plant biomass and chlorophyll by 39.32-48.75 % and 5.92-32.19 %, respectively. Notably, > 90 % removal rates were observed for PS-MPs within VFCWs. In addition to PS-MPs interception by VFCWs substrate, the increase of released benzenes indicated that the PS-MPs biodegradation occurred. Such insights are vital for developing sustainable solutions to mitigate MPs' adverse effects on ecosystems.

Phytosociology and biodiversity of roadside herbs in a salinity-affected coastal area of Bangladesh

Soil salinity in the coastal areas of Bangladesh has been rising. The responses of forest communities to the rise of salinity are somehow documented. However, the adjustments of non-forest plant communities against salinity are still limited in the literature. This study explains the phytosociology and the herbaceous plant biodiversity along with the soil salinity gradients in Shyamnagar, Bangladesh. Twenty-five roadside quadrants were systematically selected and studied for herbaceous plant diversity and soil properties. Soil Electrical conductivity (EC) and moisture show a generally rising trend from the north to the south. Moreover, the quadrants closer to the river or aquaculture with low elevation represent the salinity hot spots. About 1116 herbaceous plants belonging to 11 species were recorded. Croton bonplandianum baill is the dominant species and showed higher adaption capacity against soil EC values. Four out of 25 quadrants with higher EC, moisture and lower elevation recorded no plants. The herbaceous plant biodiversity reveals a strong spatial pattern and tendency to shrink with the rise of soil salinity while progressing towards the southeast direction. The area shows aggregated population, contagious distribution of plant species, and accommodates four dominant clusters. Roadside herbs not only hold medicinal value but also offer important cooking fuel choices to the fuel-scarce coastal communities. The outcome of this study provides important insights into herbaceous plant diversity and its relationships with soil salinity. Overall, the study outcomes improve our understanding of the impact of environmental stressors on the distribution of herbaceous plants in the coastal area.

•

Explains phytosociology of the herbaceous plant community against the soil salinity.

•

First report of salinity impact on herbaceous plant communities in Bangladesh.

•

Soil salinity strongly affects the herbaceous plant diversity in the coastal area.

•

Land elevation and soil moisture are other environmental stressors in the area.

Coupling transformation of carbon, nitrogen and sulfur in a long-term operated full-scale constructed wetland

The coupling transformation of carbon, nitrogen and sulfur compounds has been studied in lab-scale and pilot-scale constructed wetlands (CWs), but few studies investigated full-scale CW. In this study, we used batch experiments to investigate the potentials of carbon, nitrogen and sulfur transformation in a long-term operated, full-scale horizontal subsurface flow wetland. The sediments collected from the HSFW were incubated for 48 h in the laboratory with supplying various dosages of carbon, nitrogen and sulfur compounds. The results showed that heterotrophic denitrification was the main pathway. At the same time, the sulfide (S^2-)-based autotrophic denitrification was also present. Increasing TOC concentration or NO₃^- concentration could promote heterotrophic denitrification but did not inhibit the sulfide-based autotrophic denitrification. In our experiment, the highest NO₃^- removal via autotrophic denitrification was 25.23% while that via heterotrophic denitrification was 73.66%, leading to the total NO₃^- removal of 98.89%. The results also demonstrated that NO₃^- rather than NO₂^- was the preferable electron acceptor for both heterotrophic and sulfide-based autotrophic denitrification in the CW. Increasing S^2- concentrations promote NO₃^- removal from 12.99% to 25.23% without organic carbon, but varying NO₃^- or NO₂^- has no effects. These results indicated that concentrations of S^2-, instead of NO₃^- or NO₂^-, was the limiting factor for sulfide-based autotrophic denitrification in the studied CW. The microbial community analysis and correlation analysis between the transformation of carbon, nitrogen and sulfur compounds and relative abundance of bacteria further confirmed that in the CW, the key pathways coupling transformation were heterotrophic denitrification and sulfide-based autotrophic denitrification. Overall, the current study will enhance understanding of carbon, nitrogen, and sulfur transformation in CW and support better design and treatment efficiency.

Comparison of nitrogen and VFA removal pathways in autotrophic and organotrophic anammox reactors

Organotrophic anammox is a promising process for treating both nitrogen and organic containing wastewater than that of the traditional autotrophic anammox for sole nitrogen removal. However pathways of nitrogen removal particularly at metagenomic level in both processes are still unknown. Here we report, metabolic pathways of nitrogen removal in two lab-scale sequencing batch reactors (SBR), one autotrophic and another organotrophic (TOC/TN = 0.1) anammox bacteria incubated over 220 days. Both reactors showed satisfactory nitrogen removal with 840.31 mg N/L.d and 786.81 mg N/L.d for autotrophic and organotrophic anammox reactors respectively. Four anammox species namely Candidatus B. fulgida, B. sinica, J. caeni and Candidatus K. stuttgartiensis were identified in both reactors. The Candidatus K. stuttgartiensis (4%) was dominant in autotrophic reactor whereas Candidatus J. caeni (10%) in the organotrophic reactor. The supply of organic promoted the growth of anammox bacteria more than three times higher than that of the autotrophic anammox reactor. The functional genes related to the DNRA pathway was obtained in all anammox species except for Candidatus K. stuttgartiensis. The co-existence of other DNRA (Armatimonadetes and Thauera) and partial denitrifying bacteria (Chloroflexi) was also found in both reactors. Moreover, functional genes related to acetate metabolism by acetyl-CoA way were obtained in all anammox bacteria except Candidatus B. fulgida which showed alternative ackA/Pac-t pathways in organic anammox reactor. Overall current results suggest that the anammox, DNRA and partial denitrification were the key nitrogen transformation pathways, particularly in organotrophic anammox reactor. Our findings will improve understanding of the practical application of organotrophic anammox for wider wastewater treatment.

Degradation mechanisms of carbamazepine by δ-MnO2: Role of protonation of degradation intermediates

Carbamazepine (CBZ), a widely used antiepileptic drug, is refractory to biological wastewater treatment. Rapid removal of CBZ is possible using synthetic manganese oxide (δ-MnO₂) but the removal mechanisms require further investigation. In this study, CBZ degradation by δ-MnO₂ was carried out at different pH to further explore the degradation mechanisms. Results show that CBZ degradation by δ-MnO₂ was highly pH dependent, and rapid degradation occurred when pH <2.8. Based on the density functional theory calculations, increasing [H⁺] not only increased the reactivity of δ-MnO₂, but also enhanced the secondary reactions of the intermediates. During the degradation process, protonation of CBZ degradation intermediates, instead of CBZ, played an important role. The overall kinetics of CBZ degradation was then described by the retarded first-order model. The initial rate (r_init) in the model between pH 2.0 and 6.2 was determined to be r_init = (2.41 ± 0.51) × 10^-3[CBZ]^1.21[MnO₂]^1.07[H⁺]^1.41. This is the first report revealing that protonation of intermediates from CBZ degradation can improve the CBZ oxidation by δ-MnO2. The pathways of CBZ degradation by δ-MnO₂ were also proposed. The results of this study provide a new insight into the processing mechanism.

Comparison of coagulation pretreatment of produced water from natural gas well by polyaluminium chloride and polyferric sulphate coagulants

This study aimed to optimise coagulation pretreatment of the produced water (PW) collected from a natural gas field. Two coagulants, polyferric sulphate (PFS) and polyaluminium chloride (PACl), were applied separately for the organics, suspended solids (SS), and colour removal. Treatment performance at different coagulant dosages, initial pH values, stirring patterns, and the addition of cationic polyacrylamide (PAM) was investigated in jar tests. The optimal coagulation conditions were dosage of PACl 25 g/L or PFS 20 g/L with that of PAM 30 mg/L, initial pH of 11, and fast mixing of 1.5 min (for PACl) or 2 min (for PFS) at 250 rpm followed by slow mixing of 15 min at 50 rpm for both coagulants. PACl performed better than PFS to remove chemical oxygen demand (COD), total organic carbon (TOC), SS, and colour, and achieved a removal efficiency of 90.1%, 89.4%, 99.0%, and 99.9%, respectively, under the optimal condition; while PFS efficiency was 86.1%, 86.1%, 99.0%, and 98.2%, respectively. However, oil removal was higher in PFS coagulation compared to PACl and showed 98.9% and 95.3%, respectively. Biodegradability, ratio of the biological oxygen demand (five-day) (BOD₅)/COD, of the PW after pretreatment increased from 0.08 to 0.32 for PFS and 0.43 for PACl. Zeta potential (Z-potential) analysis at the optimum coagulant dosage of PACl and PFS suggests that charge neutralisation was the predominant mechanism during coagulation. Better efficiency was observed at higher pH. The addition of PAM and starring pattern had a minor influence on the removal performance of both coagulants. The results suggest that PACl or PFS can be applied for the pretreatment of PW, which can provide substantial removal of carbon, oil, and colour, a necessary first step for subsequent main treatment units such as chemical oxidation or biological treatment.

Plant uptake of diclofenac in a mesocosm-scale free water surface constructed wetland by Cyperus alternifolius

This study aimed to assess the uptake of diclofenac, a widely used nonsteroidal anti-inflammatory pharmaceutical, by a macrophyte Cyperus alternifolius in a mesocosm-scale free water surface (FWS) constructed wetland. Quantitative analysis of diclofenac concentrations in water solution and plant tissues was conducted by high performance liquid chromatography analysis after sample pre-treatment with solid-phase extraction and liquid extraction, respectively. The FWS with Cyperus alternifolius obtained a maximum 69.3% diclofenac removal efficiency, while a control system without plant only had a removal efficiency of 2.7% at the end of the experiment period of 70 days. Based on mass balance study of the experimental system, it was estimated that plant uptake and in-plant conversion of diclofenac contributed about 21.4% of the total diclofenac removal in the mesocosm while the remaining 78.6% diclofenac was eliminated through biotic and abiotic conversion of diclofenac in the water phase. Diclofenac on the root surface and in roots, stems and leaves of Cyperus alternifolius was found at the concentrations of 0.15-2.59 μg/g, 0.21-2.66 μg/g, 0.06-0.53 μg/g, and 0.005-0.02 μg/g of fresh weight of plant tissues, respectively. The maximum bioaccumulation factor of diclofenac was calculated in roots (21.04) followed by root surface (20.49), stems (4.19), and leaves (0.16), respectively. Diclofenac translocation potentiality from root to stem was found below 0.5, suggesting a slow and passive translocation process of diclofenac. Current study demonstrated high potential of Cyperus alternifolius for phytoremediation of diclofenac in FWS and can be applied in other engineered ecosystems.