Magnetic Graphene Oxide Composite for the Microextraction and Determination of Benzophenones in Water Samples

Raman microscopy allows to follow internalization, subcellular accumulation and fate of iron oxide nanoparticles in cells

An important issue in the context of both potenial toxicity of iron oxide nanoparticles (IONP) and their medical applications is tracking of the internalization process of these nanomaterials into living cells, as well as their localization and fate within them. The typical methods used for this purpose are transmission electron microscopy, confocal fluorescence microscopy as well as light-scattering techniques including dark-field microscopy and flow cytometry. All the techniques mentioned have their advantages and disadvantages. Among the problems it is necessary to mention complicated sample preparation, difficult interpretation of experimental data requiring qualified and experienced personnel, different behavior of fluorescently labeled IONP comparing to those label-free or finally the lack of possibility of chemical composition characteristics of nanomaterials. The purpose of the present investigation was the assessment of the usefulness of Raman microscopy for the tracking of the internalization of IONP into cells, as well as the optimization of this process. Moreover, the study focused on identification of the potential differences in the cellular fate of superparamagnetic nanoparticles having magnetite and maghemite core. The Raman spectra of U87MG cells which internalized IONP presented additional bands which position depended on the used laser wavelength. They occurred at the wavenumber range 1700-2400 cm-1 for laser 488 nm and below the wavenumber of 800 cm-1 in case of laser 532 nm. The intensity of the mentioned Raman bands was higher for the green laser (532 nm) and their position, was independent and not characteristic on the primary core material of IONP (magnetite, maghemite). The obtained results showed that Raman microscopy is an excellent, non-destructive and objective technique that allows monitoring the process of internalization of IONP into cells and visualizing such nanoparticles and/or their metabolism products within them at low exposure levels. What is more, the process of tracking IONP using the technique may be further improved by using appropriate wavelength and power of the laser source.

On-site extraction of benzophenones from swimming pool water using hybrid tapes based on the integration of hydrophilic-lipophilic balance microparticles and an outer magnetic nanometric domain

An on-site extraction device is presented consisting of scotch tape modified with concentric domains of micrometric hydrophilic-lipophilic balance (HLB) particles surrounded by a ring of nanometric magnetic ones. On the one hand, HLB microparticles are readily available at the surface of the tape, exposed to interact with the target analytes, being responsible for the extraction capacity of the sorptive phase. On the other hand, the presence of magnetic nanoparticles enables the attachment of the modified tape onto a metallic screw via a magnet, which is then coupled to a wireless drill, enabling the stirring of the microextraction device. Both are simply fixed to the cost-effective, flexible, and versatile support, i.e., scotch tape, owing to their adhesive properties. The microextraction device has been applied to the determination of six benzophenones in swimming pool water samples. The variables that may affect the extraction process have been evaluated. Under the optimum conditions and using liquid chromatography-tandem mass spectrometry as the instrumental technique, the method provided a limit of detection of 0.03 µg L-1. The intra-day precision, evaluated at three different concentration levels and expressed as relative standard deviation, was lower than 10%, which also comprises the variability within single-use sorptive tapes. The accuracy, calculated with spiked samples and expressed as relative recovery, ranged from 71 to 138%. The method was applied to the analysis of swimming pool water, revealing the presence of such compounds.

Single-Walled (Magnetic) Carbon Nanotubes in a Pectin Matrix in the Design of an Allantoin Delivery System

Single-walled carbon nanotubes (SWCNTs) outperform other materials due to their high conductivity, large specific surface area, and chemical resistance. They have numerous biomedical applications, including the magnetization of the SWCNT (mSWCNT). The drug loading and release properties of see-through pectin hydrogels doped with SWCNTs and mSWCNTs were evaluated in this study. The active molecule in the hydrogel structure is allantoin, and calcium chloride serves as a cross-linker. In addition to mixing, absorption, and swelling techniques, drug loading into carbon nanotubes was also been studied. To characterize the films, differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, surface contact angle measurements, and opacity analysis were carried out. Apart from these, a rheological analysis was also carried out to examine the flow properties of the hydrogels. The study was also expanded to include N-(9-fluorenyl methoxycarbonyl)glycine-coated SWCNTs and mSWCNTs as additives to evaluate the efficiency of the drug-loading approach. Although the CNT additive was used at a 1:1000 weight ratio, it had a significant impact on the hydrogel properties. This effect, which was first observed in the thermal properties, was confirmed in rheological analyses by increasing solution viscosity. Additionally, rheological analysis and drug release profiles show that the type of additive causes a change in the matrix structure. According to TGA findings, even though SWCNTs and mSWCNTs were not coated more than 5%, the coating had a significant effect on drug release control. In addition to all findings, cell viability tests revealed that hydrogels with various additives could be used for visual wound monitoring, hyperthermia treatment, and allantoin release in wound treatment applications.

Dispersive liquid-liquid microextraction and Monte Carlo simulation of margin of safety for octocrylene, EHMC, 2ES, and homosalate in sunscreens

Dispersive liquid-liquid microextraction (DLLME) using a floating organic drop has been optimized and used for the sample preparation of four commonly used ultraviolet filter (UVF) substances in sunscreens. Plackett-Burman experimental design was used to screen 10 variables in DLLME. The most significant variables were then optimized by using a response surface method with a Box-Behnken design. DLLME followed by an optimized HPLC identified octocrylene, 2-ethylhexyl-4-methoxycinnamate, ethylhexyl salicylate, and homosalate as the frequently found UVFs in commercial sunscreens. The systemic exposure dosage and margin of safety (MoS) for the identified UVFs were estimated using in-use concentrations and application patterns. The average systemic exposure dosage values for octocrylene, 2-ethylhexyl-4-methoxycinnamate, ethylhexyl salicylate, and homosalate were 0.52, 0.61, 0.020, and 0.079 mg/kg body weight per day, respectively. Whereas the average MoS values for individual UVFs ranging from 296 to 3160 were all significantly higher than the limit value of 100, the combined exposure risks were slightly above the limit. The probabilistic health risk assessment using Monte Carlo simulation revealed that the combined MoS values were (mean, 10‰, 90‰) 342, 119, and 441, respectively. Regarding the usage of sunscreen cosmetics containing the UVFs studied, these results indicate a safety concern for those who apply multiple UVF products.

Magnetic solid-phase extraction based on GO/Fe3O4 coupled with UPLC-MS/MS for determining nitroimidazoles and their metabolites in honey

A magnetic graphene oxide (GO/Fe₃O₄) nanocomposite was synthesized in one step by a chemical coprecipitation method, which was further used for magnetic solid-phase extraction (MSPE). This study aimed to combine GO/Fe₃O₄ with ultra-high-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) to detect the nitroimidazoles (NDZs) and their three major metabolites in honey samples. GO/Fe₃O₄ was characterized by transmission electron microscopy (TEM), Fourier transform-infrared (FT-IR) spectroscopy, and magnetic property measurement system (MPMS), and the influencing parameters such as adsorbent amount, pH of the dissolved sample solution, sample volume, type and volume of the eluent, shaking speed, and adsorption and desorption time were optimized. Under the optimized conditions, the limits of detection (LOD) and quantitation (LOQ) of the method were 0.003-0.08 μg kg^-1 and 0.009-0.3 μg kg^-1, respectively, with good linearity reported in the range of 0.5-20 μg kg^-1 (R² ≥ 0.9991). The average recoveries of 10 analytes were in the range of 66.0%-90.8% with relative standard deviations (RSD) lower than 6.9% (n = 6). The preparation of GO/Fe₃O₄ and the extraction process were convenient and rapid, and consumed small amounts of organic solvents. The optimized method was successfully applied for extracting NDZs and their three major metabolites from honey samples with good accuracy.

Benzophenones in the Environment: Occurrence, Fate and Sample Preparation in the Analysis

The ubiquitous presence of emerging contaminants in the environment is an issue of great concern. Notably, for some of them, no established regulation exists. Benzophenones are listed as emerging contaminants, which have been identified in the environment as well as in human fluids, such as urine, placenta, and breast milk. Their accumulation and stability in the environment, combined with the revealed adverse effects on ecosystems including endocrine, reproductive, and other disorders, have triggered significant interest for research. Benzophenones should be extracted from environmental samples and determined for environmental-monitoring purposes to assess their presence and possible dangers. Numerous sample preparation methods for benzophenones in environmental matrices and industrial effluents have been proposed and their detection in more complex matrices, such as fish and sludges, has also been reported. These methods range from classical to more state-of-the-art methods, such as solid-phase extraction, dispersive SPE, LLE, SBSE, etc., and the analysis is mostly completed with liquid chromatography, using several detection modes. This review critically outlines sample preparation methods that have been proposed to date, for the extraction of benzophenones from simple and complex environmental matrices and for cleaning up sample extracts to eliminate potential interfering components that coexist therein. Moreover, it provides a brief overview of their occurrence, fate, and toxicity.

[Recent advances in the use of graphene for sample preparation]

Sample preparation is playing an increasingly important role in sample analysis. The enrichment efficiency of the target and the removal effect of the sample matrix are strongly dependent on the extraction material. Therefore, the development of efficient extraction materials is an important research focus in the field of sample preparation. Various advanced materials such as nanomaterials, mesoporous materials, ionic liquids, aerogels, carbon materials, metal-organic frameworks, and covalent organic frameworks have been introduced to produce a diverse range of extraction materials for sample preparation. Owing to its unique physical and chemical properties, graphene, an excellent carbon nanomaterial, has attracted significant attention in different areas. Due to their unique advantages of large surface area, large π-electrons, excellent adsorption properties, abundant functional groups, and facile chemical modification, graphene-based materials have displayed excellent extraction performance for diverse analytes. Furthermore, graphene-based extraction materials have been applied to pretreat real samples from different fields. This paper provides an overview of the recent advances in graphene sample preparation from 2020 to date. The manuscript covers the use of graphene, graphene oxide, and the related functionalized materials as sorbents, as well as their specific applications in cartridge solid-phase extraction, dispersive solid-phase extraction, magnetic solid-phase extraction, stir bar sorptive extraction, fiber solid-phase microextraction, and in-tube solid-phase microextraction. To prevent the aggregation of graphene, three-dimensional graphene, porous graphene aerogels, graphene-modified silica, and stainless-steel mesh were developed for cartridge solid-phase extraction. Furthermore, some graphene-based extraction materials were used to develop online solid-phase extraction, which allowed for automatic and high-throughput tests. Graphene nanosheets and their hybrid materials with molybdenum disulfide or zinc oxide nanoparticles have been applied to dispersive solid-phase extraction, and several types of contaminants, including metal ions, bisphenol endocrine disruptors, paraben preservatives, and phthalates, could be captured. By combination with magnetic materials using the coprecipitation method or via chemical post-modification, many magnetic graphene extraction materials have been produced for magnetic solid-phase extraction. The introduction of magnetic graphene not only enhanced the extraction efficiency but also simplified the test process, making it highly suitable for complex samples such as food and biological samples. Similar to magnetic solid-phase extraction, stir bar sorptive extraction is a very simple and efficient extraction method that shows good extraction performance for metal ions and organic pollutants from environmental water, medicines in urine, and organic pollutants in cosmetics. In addition to its excellent applicability to solid-phase extraction, graphene delivered satisfactory performance for solid-phase microextraction. Graphene has been used as an extraction coating for the extraction of fibers or tubes by coupling solid-phase microextraction with chromatographic detection, and many kinds of organic pollutants, including polychlorinated biphenyls, phthalates, polycyclic aromatic hydrocarbons, toluene, xylenes, organophosphorus pesticides, phenoxy acid herbicides, and antibiotics, in environmental or biological samples have been successfully determined. The extraction mechanism, including π-π, electrostatic, hydrophobic, hydrophilic, and hydrogen-bonding interactions, is also discussed. Because of the mixed-mode interactions and rich functionalization, graphene-based extraction materials could effectively capture and selectively enrich different types of species. These extraction or microextraction techniques have been coupled with detection methods such as chromatography, mass spectrometry, and atomic absorption spectroscopy and widely used in environmental monitoring, food safety, and biochemical analysis. The future development of graphene in the field of sample pretreatment focuses on the following aspects: 1) functionalization of graphene with specific groups such as affinity groups, chelating groups, and molecularly imprinted sites to achieve unique extraction selectivity; 2) combination of graphene with the advanced materials, including covalent organic frameworks, metal organic frameworks, aerogels, and nanomaterials, thus realizing the complementary advantages between materials, so that the hybrid graphene materials find broad application prospects in sample preparation; 3) combination of electromagnetic materials with graphene to form electromagnetic composites, as well as the use of electromagnetic fields to improve extraction selectivity and efficiency; 4) exploiting the good performance of graphene-based materials to overcome the difficulty encountered in the pretreatment of complex samples; 5) development of more green methods to prepare graphene-based extraction materials or functionalize graphene, in line with the trends in green chemistry; 6) application of more graphene-based materials to online sample preparation for meeting the development trends in the field of analytical chemistry.

Tailoring the Surface of Natural Graphite with Functional Metal Oxides via Facile Crystallization for Lithium-Ion Batteries

Graphite is the most popular anode material for lithium-ion batteries (LIBs) owing to its high reversibility and stable cycling performance. With the rapid growth of the global electric vehicle (EV) market, it has become necessary to improve the quick-charge performance of graphite to reduce the charging time of LIBs. Therefore, from a structural viewpoint, it is crucial to control interfacial reactions and stabilize the surface of graphite to improve the sluggish interfacial kinetics. Herein, we propose a facile approach for integrating functional metal oxides on the surface of natural graphite (NG) via a surface-coating technique in combination with a facile-crystallization process. The functionality of the metal oxides, i.e., MoO₂ and Fe₃O₄, on the surface of NG was thoroughly investigated based on various structural and electrochemical analyses. The results demonstrate that the metal oxides play critical roles in stabilizing the surface of NG and facilitating faster Li⁺ migration at the interface between NG and the electrolyte during cycling. In particular, the full cell configured with the c-Fe₃O₄-NG anode shows remarkably improved charging behavior (3 C charging-1 C discharging) without any significant loss of reversible capacity during 300 cycles. This study has conclusively established that tailoring the surface of NG with functional metal oxides would be a utilitarian way to improve the charging capability of NG. We are confident that the study results would provide utilitarian insights into the development of advanced LIBs for successful implementation in EV applications in the future.

Effective Detoxification of Aflatoxin B1 and Ochratoxin A Using Magnetic Graphene Oxide Nanocomposite: Isotherm and Kinetic Study

One of the approaches for reducing exposure to mycotoxins is to lessen their bioavailability by applying nanocomposite adsorbents. Magnetic graphene oxide (MGO) is a new class of nanostructured multifunctional nanocomposite materials, which play a vital role as an adsorbent. The primary aim of this study is to apply response surface methodology (RSM) to optimize the influence of pH within the range of 3 to 7, time (3–7 h), and temperature (30–50 °C), on the simultaneous detoxification of aflatoxin B1 (AFB1) and ochratoxin A (OTA) by using MGO. The optimal condition was obtained at pH 5, 5 h, and 40 °C. Further investigation of the adsorption evaluation was carried out by studying different parameters, such as the influence of contact time, initial mycotoxins concentration, and temperature. According to the experimental data, it can be concluded that the pseudo-second-order kinetic model and the Freundlich isotherm fitted well. The capability of adsorption for the Freundlich model was calculated as 153 and 95 ng/g for AFB1 and OTA, respectively. The thermodynamic study showed that the sorption studies act spontaneously as an exothermic process. These findings suggest that the application of MGO as a nanocomposite is of great significance for the detoxification of mycotoxins.