Self-Assembled Monolayers of Copper Sulfide Nanoparticles on Glass as Antibacterial Coatings

Nanoparticle-Based Strategies for Managing Biofilm Infections in Wounds: A Comprehensive Review

Chronic wounds containing opportunistic bacterial pathogens are a growing problem, as they are the primary cause of morbidity and mortality in developing and developed nations. Bacteria can adhere to almost every surface, forming architecturally complex communities called biofilms that are tolerant to an individual's immune response and traditional treatments. Wound dressings are a primary source and potential treatment avenue for biofilm infections, and research has recently focused on using nanoparticles with antimicrobial activity for infection control. This Review categorizes nanoparticle-based approaches into four main types, each leveraging unique mechanisms against biofilms. Metallic nanoparticles, such as silver and copper, show promising data due to their ability to disrupt bacterial cell membranes and induce oxidative stress, although their effectiveness can vary based on particle size and composition. Phototherapy-based nanoparticles, utilizing either photodynamic or photothermal therapy, offer targeted microbial destruction by generating reactive oxygen species or localized heat, respectively. However, their efficacy depends on the presence of light and oxygen, potentially limiting their use in deeper or more shielded biofilms. Nanoparticles designed to disrupt extracellular polymeric substances directly target the biofilm structure, enhancing the penetration and efficacy of antimicrobial agents. Lastly, nanoparticles that induce biofilm dispersion represent a novel strategy, aiming to weaken the biofilm's defense and restore susceptibility to antimicrobials. While each method has its advantages, the selection of an appropriate nanoparticle-based treatment depends on the specific requirements of the wound environment and the type of biofilm involved. The integration of these nanoparticles into wound dressings not only promises enhanced treatment outcomes but also offers a reduction in the overall use of antibiotics, aligning with the urgent need for innovative solutions in the fight against antibiotic-tolerant infections. The overarching objective of employing these diverse nanoparticle strategies is to replace antibiotics or substantially reduce their required dosages, providing promising avenues for biofilm infection management.

Nanomaterials for Photothermal Antimicrobial Surfaces

Microbial infection diseases are a major threat to human health and have become one of the main causes of mortality. The search for novel antimicrobial strategies is an important challenge for the scientific community, considering also the constant increase of antimicrobial resistance and the rise of new diseases. Among the new strategies to combat microbial infections, the photothermal effect seems to be one of the most promising. Hyperthermia is an effective and broad spectrum strategy for the removal of microbial infections. Among all of the strategies to reduce the diffusion of microbial infections, the preparation of antimicrobial surfaces seems of primary importance. In many cases, in fact, an infection can be diffused through surfaces just by touching them, or by inoculating microbes through an internalizable device, such as an implant, a prosthesis, or a catheter. In this review, we will summarize the recent advances in the preparation of photothermal antibacterial surfaces.

Chiral ligands and photothermal synergistic effects of inorganic nanoparticles for bacteria-killing

As the drawbacks of antibiotics in treating bacterial infections emerged, physical methods such as near-infrared-activated (NIR-activated) bacterial killing, have attracted great interests for their advantages of no resistance, short action time and few side effects. In this manuscript, NIR-activated bacteria-killing performance of chiral copper sulphide nanoparticles (L-/d-CuS NPs) was investigated using linearly polarized light (LPL) and circularly polarized light (CPL) as illumination sources, respectively. Chiral CuS NPs showed enhanced NIR-activated bacteria-killing effect compared with achiral CuS NPs under the same conditions. Moreover, these chiral CuS NPs showed obvious chirality-related antibacterial effect: the bacterial killing was more efficient under CPL activation, and L- and d-CuS NPs had higher antibacterial efficiency under left circularly polarized light (LCPL) and right circularly polarized light (RCPL), respectively. The possible mechanism of bacteria-killing performance for chiral CuS NPs was discussed in detailed. Photothermal bacteria-killing tests of chiral CuS NPs "sealed" in polydimethylsiloxane (PDMS) demonstrated the individual influence of photothermal effect. These observations in this paper could provide ideas for the potential applications of chiral nanostructures with enhanced photothermal effect in efficient bacterial killing.

Toxicity Mechanisms of Copper Nanoparticles and Copper Surfaces on Bacterial Cells and Viruses

Copper is a metal historically used to prevent infections. One of the most relevant challenges in modern society are infectious disease outbreaks, where copper-based technologies can play a significant role. Currently, copper nanoparticles and surfaces are the most common antimicrobial copper-based technologies. Despite the widespread use of copper on nanoparticles and surfaces, the toxicity mechanism(s) explaining their unique antimicrobial properties are not entirely known. In general, toxicity effects described in bacteria and fungi involve the rupture of membranes, accumulation of ions inside the cell, protein inactivation, and DNA damage. A few studies have associated Cu-toxicity with ROS production and genetic material degradation in viruses. Therefore, understanding the mechanisms of the toxicity of copper nanoparticles and surfaces will contribute to developing and implementing efficient antimicrobial technologies to combat old and new infectious agents that can lead to disease outbreaks such as COVID-19. This review summarizes the current knowledge regarding the microbial toxicity of copper nanoparticles and surfaces and the gaps in this knowledge. In addition, we discuss potential applications derived from discovering new elements of copper toxicity, such as using different molecules or modifications to potentiate toxicity or antimicrobial specificity.

In Vivo and In Vitro Biocompatibility Study of CuS Nanoparticles: Photosensitizer for Glioblastoma Photothermal Therapy

Although photothermal treatment (PTT) has made significant progress in the fight against cancer, certain types of malignant tumors are still difficult to eradicate. PTT uses photothermal transforming agents to absorb NIR light and convert it to thermal energy, causing cancer cell death. In this study, we synthesized alginate (Alg)-coated CuS nanoparticles (CuS@Alg) as photothermal transforming agents to kill glioblastoma cancer cells. Nanoparticles were synthesized via a facile method, then, were characterized with different techniques such as ultraviolet-visible spectroscopy (UV-Vis), Fourier transform infrared (FTIR), X-ray diffraction analysis (XRD), transmission electron microscopy (TEM), and dynamic light scattering (DLS). Nanoparticles show high stability, and are monodisperse. CuS@Alg was discovered to have a spherical shape, a hydrodynamic size of about 19.93 nm, and a zeta potential of - 9.74 mV. CuS@Alg is able to increase temperature of medium under NIR light. Importantly, in vitro investigations show that PTT based on CuS@Alg has a strong theraputic impact, resulting in much high effectiveness. The LD50 and histopathology assays were used to confirm the NPs' non-toxicity in vivo. Results from an in vivo subacute toxicity investigation showed that the fabricated NPs were perfectly safe to biomedical usage.

Photo-Stimuli-Responsive CuS Nanomaterials as Cutting-Edge Platform Materials for Antibacterial Applications

Photo-stimuli-responsive therapeutic nanomaterials have gained widespread attention as frontline materials for biomedical applications. The photoactivation strategies are classified as single-modality (based on either reactive oxygen species (ROS)-based photodynamic therapy (PDT), hyperthermia-based photothermal therapy (PTT)), or dual-modality (which combines PDT and PTT). Due to its minimal invasiveness, phototherapy has been extensively applied as an efficient therapeutic platform for many diseases, including skin cancers. However, extensive implementation of phototherapy to address the emergence of multidrug-resistant (MDR) bacterial infections remains challenging. This review focuses on copper sulfide (CuS) nanomaterials as efficient and cost-effective PDT and PTT therapeutic nanomaterials with antibacterial activity. The features and merits of CuS nanomaterials as therapeutics are compared to those of other nanomaterials. Control of the dimensions and morphological complexity of CuS nanomaterials through judicious synthesis is then introduced. Both the in vitro antibacterial activity and the in vivo therapeutic effect of CuS nanomaterials and derivative nanocomposites composed of 2D nanomaterials, polymers, metals, metal oxides, and proteins are described in detail. Finally, the perspective of photo-stimuli-responsive CuS nanomaterials for future clinical antibacterial applications is highlighted. This review illustrates that CuS nanomaterials are highly effective, low-toxic, and environmentally friendly antibacterial agents or platform nanomaterials for combatting MDR bacterial infections.

A Supramolecular Approach to Antimicrobial Surfaces

In this paper, we report on the preparation of Imidazole-functionalized glass surfaces, demonstrating the ability of a dinuclear Cu(II) complex of a macrocyclic ligand to give a “cascade” interaction with the deprotonated forms of grafted imidazole moieties. In this way, we realized a prototypal example of an antimicrobial surface based on a supramolecular approach, obtaining a neat microbicidal effect using low amounts of the described copper complex.

Ternary and Quaternary Nanocrystalline Cu-Based Sulfides as Perspective Antibacterial Materials Mechanochemically Synthesized in a Scalable Fashion

Twelve Cu-based ternary (Cu-Me₁-S, Me₁ = Fe, Sn, or Sb) and quaternary (Cu-Me₂-Sn-S, Me₂ = Fe, Zn, or V) nanocrystalline sulfides are shown as perspective antibacterial materials here. They were prepared from elemental precursors by a one-step solvent-free mechanochemical synthesis in a 100 g batch using scalable eccentric vibratory ball milling. Most of the products have shown strong antibacterial activity against Escherichia coli and Staphylococcus aureus bacteria. For instance, stannite Cu₂FeSnS₄ and mohite Cu₂SnS₃ were the most active against E. coli, whereas kesterite Cu₂ZnSnS₄ and rhodostannite Cu₂FeSn₃S₈ exhibited the highest antibacterial activity against S. aureus. In general, stannite has shown the best antibacterial properties out of all the studied samples. Five out of twelve products have been prepared using mechanochemical synthesis for the first time in a scalable fashion here. The presented synthetic approach is a promising alternative to traditional syntheses of nanomaterials suitable for biological applications and shows ternary and quaternary sulfides as potential candidates for the next-generation antibacterial agents.

Functionalized Self-Assembled Monolayers: Versatile Strategies to Combat Bacterial Biofilm Formation

Bacterial infections due to biofilms account for up to 80% of bacterial infections in humans. With the increased use of antibiotic treatments, indwelling medical devices, disinfectants, and longer hospital stays, antibiotic resistant infections are sharply increasing. Annual deaths are predicted to outpace cancer and diabetes combined by 2050. In the past two decades, both chemical and physical strategies have arisen to combat biofilm formation on surfaces. One such promising chemical strategy is the formation of a self-assembled monolayer (SAM), due to its small layer thickness, strong covalent bonds, typically facile synthesis, and versatility. With the goal of combating biofilm formation, the SAM could be used to tether an antibacterial agent such as a small-molecule antibiotic, nanoparticle, peptide, or polymer to the surface, and limit the agent’s release into its environment. This review focuses on the use of SAMs to inhibit biofilm formation, both on their own and by covalent grafting of a biocidal agent, with the potential to be used in indwelling medical devices. We conclude with our perspectives on ongoing challenges and future directions for this field.

Synergy effects of copper and L-arginine on osteogenic, angiogenic, and antibacterial activities

Copper (Cu) ions have been found to exert antibacterial and angiogenic effects. However, some studies have indicated that it inhibits osteogenesis at high concentrations. On the other hand, L-arginine (Arg) is a semi-essential amino acid required for various biological processes, including osteogenic and angiogenic activities. As a result, we hypothesized that combining Arg with Cu ions would reduce its inhibitory effects on osteogenesis while increasing its angiogenic and antibacterial capabilities. To assess osteogenic and angiogenic activities, we employed rat bone marrow mesenchymal stem cells (MSCs) and human umbilical vein endothelial cells (HUVECs), respectively. The gram-positive bacteria Staphylococcus epidermidis (S. epidermidis), Staphylococcus aureus (S. aureus), and the gram-negative bacterium Escherichia coli (E. coli) were used to investigate bacterial behaviors. According to ALP activity and calcium deposition outcomes, copper ions inhibited osteogenic development of MSCs at 100 µM; however, Arg supplementation somewhat mitigated the inhibitory effects. Furthermore, Copper and Arg synergistically stimulated migration and tube formation of HUVECs. According to our findings, copper ions and Arg in the range of 1-100 µM had no antibacterial effect on any examined bacteria. However, at a dose of 20 mM, copper demonstrated antibacterial activity, which was boosted by Arg. Overall, these findings suggest that a combination of copper and Arg may be more beneficial for bone regeneration than either copper or Arg alone.

Microscopic-Scale Examination of the Black and Orange–Yellow Colours of Architectural Glazes from Aššur, Khorsabad and Babylon in Ancient Mesopotamia

Three major corpora of architectural glazed bricks from Ancient Mesopotamia dating to the Neo-Assyrian (Aššur and Khorsabad sites) and the Neo-Babylonian (Babylon site) Periods have been submitted to an in-depth comparative study of the orange–yellow and black glazes. Distinct hues in the orange–yellow range were observed according to the archaeological site. They appear to have been well mastered by the glassmakers, consisting in the ex situ preparation of the antique lead antimonate pigment and its mixing with transparent soda-lime glass frit or with the glass-forming components. The intentional addition of hematite or of Cu2+ colouring ions in a controlled amount is suggested in two cases. SEM-EDX and Raman analysis of the lead antimonate pigments have pointed out different chemical substitutions in their pyrochlore structure, mainly Fe3+ in the Sb5+ site and Ca2+ in the Pb2+ site, the proportion of which being correlated to the pigment shade (from pale yellow to orange–red). Part of these substitutions arises from the chemical reaction of the pigment with the hematite and glass melt during firing. Regarding the black glazes, an unexpected colouring technique involving copper sulphide nanoparticles together with the chromophore Fe3+-S2− is highlighted for Khorsabad (8th century BC) and for Babylon (6th century BC). For Aššur blacks, the study reveals a change in their colouring technique between the 9th and 8th centuries BC, from a colouration with Mn oxides to an enigmatic one that could also have involved copper sulphide nanoparticles.

Heat-Up Colloidal Synthesis of Shape-Controlled Cu-Se-S Nanostructures-Role of Precursor and Surfactant Reactivity and Performance in N2 Electroreduction

Copper selenide-sulfide nanostructures were synthesized using metal-organic chemical routes in the presence of Cu- and Se-precursors as well as S-containing compounds. Our goal was first to examine if the initial Cu/Se 1:1 molar proportion in the starting reagents would always lead to equiatomic composition in the final product, depending on other synthesis parameters which affect the reagents reactivity. Such reaction conditions were the types of precursors, surfactants and other reagents, as well as the synthesis temperature. The use of 'hot-injection' processes was avoided, focusing on 'non-injection' ones; that is, only heat-up protocols were employed, which have the advantage of simple operation and scalability. All reagents were mixed at room temperature followed by further heating to a selected high temperature. It was found that for samples with particles of bigger size and anisotropic shape the CuSe composition was favored, whereas particles with smaller size and spherical shape possessed a Cu2-xSe phase, especially when no sulfur was present. Apart from elemental Se, Al2Se3 was used as an efficient selenium source for the first time for the acquisition of copper selenide nanostructures. The use of dodecanethiol in the presence of trioctylphosphine and elemental Se promoted the incorporation of sulfur in the materials crystal lattice, leading to Cu-Se-S compositions. A variety of techniques were used to characterize the formed nanomaterials such as XRD, TEM, HRTEM, STEM-EDX, AFM and UV-Vis-NIR. Promising results, especially for thin anisotropic nanoplates for use as electrocatalysts in nitrogen reduction reaction (NRR), were obtained.

Harvesting Light To Produce Heat: Photothermal Nanoparticles for Technological Applications and Biomedical Devices

The photothermal properties of nanoparticles (NPs), that is, their ability to convert absorbed light into heat, have been studied since the end of the last century, mainly on gold NPs. In the new millennium, these studies have developed into a burst of research dedicated to the photothermal ablation of tumors. However, beside this strictly medical theme, research has also flourished in the connected areas of photothermal antibacterial surface coatings, gels and polymers, of photothermal surfaces for cell stimulation, as well as in purely technological areas that do not involve medical biotechnology. These include the direct conversion of solar light into heat, a more efficient sun-powered generation of steam and the use of inkjet-printed patterns of photothermal NPs for anticounterfeit printing based on temperature reading, to cite but a few. After an analysis of the photothermal effect (PTE) and its mechanism, this minireview briefly considers the antitumor-therapy theme and takes an in-depth look at all the other technological and biomedical applications of the PTE, paying particular attention to photothermal materials whose NPs have joined those based on Au.

An excellent antibacterial and high self-adhesive hydrogel can promote wound fully healing driven by its shrinkage under NIR

The lacks of antibacterial properties, low adhesion and delayed wound healing of the hydrogel wound dressings limit their applications in wound treatment. To resolve these, a novel hydrogel composed of polydopamine (PDA), Ag and graphene oxide (GO) is fabricated for wound dressing via the chemical crosslinking of N-isopropylacrylamide (NIPAM) and N,N'-methylene bisacrylamide (BIS). The prepared hydrogel containing PDA@Ag5GO1 (Ag5GO1 denotes the mass ratio between Ag and GO is 5:1) exhibits effective antibacterial properties and high inhibition rate against E. coli and S. aureus. It shows high adhesion ability to various substrate materials, implying a simpler method to the wound obtained by self-fixing rather than suturing. More important, it can produce strong contractility under the irradiation of near-infrared light (NIR), exerting a centripetal force that helps accelerate wound healing. Thus, the hydrogel containing a high concentration PDA@Ag5GO1 irradiated by NIR can completely repair the wound defect (1.0 × 1.0 cm²) within 15 days, the wound healing rate can reach 100%, which was far higher than other groups. Taken together, the new hydrogel with excellent antibacterial, high adhesion and strong contractility will subvert the traditional treatment methods on wound defect, extending its new application range in wound dressing.

Application of nanoparticles in bone tissue engineering; a review on the molecular mechanisms driving osteogenesis

The introduction of nanoparticles into bone tissue engineering strategies is beneficial to govern cell fate into osteogenesis and the regeneration of large bone defects. The present study explored the role of nanoparticles to advance osteogenesis with a focus on the cellular and molecular pathways involved. Pubmed, Pubmed Central, Embase, Scopus, and Science Direct databases were explored for those published articles relevant to the involvement of nanoparticles in osteogenic cellular pathways. As multifunctional compounds, nanoparticles contribute to scaffold-free and scaffold-based tissue engineering strategies to progress osteogenesis and bone regeneration. They regulate inflammatory responses and osteo/angio/osteoclastic signaling pathways to generate an osteogenic niche. Besides, nanoparticles interact with biomolecules, enhance their half-life and bioavailability. Nanoparticles are promising candidates to promote osteogenesis. However, the interaction of nanoparticles with the biological milieu is somewhat complicated, and more considerations are recommended on the employment of nanoparticles in clinical applications because of NP-induced toxicities.

Nanocomposite Sprayed Films with Photo-Thermal Properties for Remote Bacteria Eradication

Currently there is a strong demand for novel protective materials with efficient antibacterial properties. Nanocomposite materials loaded with photo-thermally active nanoparticles can offer promising opportunities due to the local increase of temperature upon near-infrared (NIR) light exposure capable of eradicating bacteria. In this work, we fabricated antibacterial films obtained by spraying on glass slides aqueous solutions of polymers, containing highly photo-thermally active gold nanostars (GNS) or Prussian Blue (PB) nanoparticles. Under NIR light irradiation with low intensities (0.35 W/cm²) these films demonstrated a pronounced photo-thermal effect: ΔT_max up to 26.4 °C for the GNS-containing films and ΔT_max up to 45.8 °C for the PB-containing films. In the latter case, such a local temperature increase demonstrated a remarkable effect on a Gram-negative strain (P. aeruginosa) killing (84% of dead bacteria), and a promising effect on a Gram-positive strain (S. aureus) eradication (69% of dead bacteria). The fabricated films are promising prototypes for further development of lightweight surfaces with efficient antibacterial action that can be remotely activated on demand.

Photothermally active nanoparticles as a promising tool for eliminating bacteria and biofilms

Bacterial contamination is a severe issue that affects medical devices, hospital tools and surfaces. When microorganisms adhere to a surface (e.g., medical devices or implants) they can develop into a biofilm, thereby becoming more resistant to conventional biocides and disinfectants. Nanoparticles can be used as an antibacterial agent in medical instruments or as a protective coating in implantable devices. In particular, attention is being drawn to photothermally active nanoparticles that are capable of converting absorbed light into heat. These nanoparticles can efficiently eradicate bacteria and biofilms upon light activation (predominantly near the infrared to near-infrared spectral region) due a rapid and pronounced local temperature increase. By using this approach new, protective, antibacterial surfaces and materials can be developed that can be remotely activated on demand. In this review, we summarize the state-of-the art regarding the application of various photothermally active nanoparticles and their corresponding nanocomposites for the light-triggered eradication of bacteria and biofilms.