Photocatalytic Reduction of Cr(VI) in the Presence of Humic Acid Using Immobilized Ce-ZrO2 under Visible Light

Insight into the photocatalytic reduction of hexavalent chromium using photodeposited metal nanoparticle-TiO2 photocatalysis

Hexavalent chromium (Cr(VI)) is carcinogenic to organisms. It is widely used in several industries. In this work, we investigated the Cr(VI) photocatalytic reaction with a scavenger on Pt and Cu-TiO2 photocatalysts. Metal-deposited TiO2 was successfully synthesized by a photodeposition method. TEM-EDX, XRD, and UV-DR were analyzed to study the changes in morphology, crystallinity, and the electronic properties of photocatalysts. The rate of charge recombination during reduction and photoluminescence (PL) spectroscopy was used to examine the catalysts in depth. Cu-TiO2 demonstrates the highest photocatalytic activity for 63.74% of Cr(VI) removal. To understand the photoreduction of Cr(VI), the fate transformation of Cr species during the adsorption and reaction was investigated using in situ XANES. The results demonstrated that the Cr(III) was noticeably main component adsorbed over the catalyst, particularly in Cu-TiO2. The presence of humic acid can boost the Cr(VI) removal efficiency and enhanced the Cr(VI) reduction to Cr(III). We believe that the extensive research on Cr(VI) photoreduction on metal-TiO2 heterojunction will provide a comprehensive understanding of catalytic behaviors, paving the way for rationally designed novel Cr reduction catalysts.

Photocatalytic nanohybrid membranes for highly efficient wastewater treatment: A comprehensive review

Wastewater is inevitably generated from human activities as part of the life cycle chain that potentially damages the environment. The integration of photocatalytic reaction and membrane separation for wastewater treatment has gained great attention in recent studies. However, there are still many technical limitations for its application such as toxic metal release, catalyst deactivation, fouling/biofouling, polymer disintegration, and separation performance decline. Different types, combinations, and modifications of photocatalysts material combined with membranes such as semiconductor metal oxides, binary/ternary hybrid metal oxides, elemental doped semiconductors, and metal-organic frameworks (MOFs) for improving the performance and compatibility are presented and discussed. The strategies of incorporating photocatalysts into membrane matrix for pursuing the most stable membrane integrity, high photocatalytic efficiency, and excellent perm-selectivity performance in the very recent studies were discussed. This review also outlines the performance enhancement of photocatalytic membranes (PMs) in wastewater treatment and its potential for water reclamation. Photocatalysts enhanced membrane separation by inducing anti-fouling and self-cleaning properties as well as antibacterial activity. Based on the reviewed study, PMs are possible to achieve complete removal of emerging contaminants and ∼99% reduction of bacterial colony that leading on the zero liquid discharge (ZLD). However, the intensive exposure of photo-induced radicals potentially damages the polymeric membrane. Therefore, future studies should be focused on fabricating chemically stable host-membrane material. Moreover, the light source and the membrane module design for the practical application by considering the hydrodynamic and cost-efficiency should be a concern for technology diffusion to the industrial-scale application.

Removal of hexavalent chromium via biochar-based adsorbents: State-of-the-art, challenges, and future perspectives

Chromium originates from geogenic and extensive anthropogenic activities and significantly impacts natural ecosystems and human health. Various methods have been applied to remove hexavalent chromium (Cr(VI)) from aquatic environmental matrices, including adsorption via different adsorbents, which is considered to be the most common and low-cost approach. Biochar materials have been recognized as renewable carbon sorbents, pyrolyzed from various biomass at different temperatures under limited/no oxygen conditions for heavy metals remediation. This review summarizes the sources, chemical speciation & toxicity of Cr(VI) ions, and raw and modified biochar applications for Cr(VI) remediation from various contaminated matrices. Mechanistic understanding of Cr(VI) adsorption using different biochar-based materials through batch and saturated column adsorption experiments is documented. Electrostatic interaction and ion exchange dominate the Cr(VI) adsorption onto the biochar materials in acidic pH media. Cr(VI) ions tend to break down as HCrO₄^-, CrO₄^2-, and Cr₂O₇^2- ions in aqueous solutions. At low pH (∼1-4), the availability of HCrO₄^- ions attributes the electrostatic forces of attraction due to the available functional groups such as -NH₄⁺, -COOH, and -OH₂⁺, which encourages higher adsorption of Cr(VI). Equilibrium isotherm, kinetic, and thermodynamic models help to understand Cr(VI)-biochar interactions and their adsorption mechanism. The adsorption studies of Cr(VI) are summarized through the fixed-bed saturated column experiments and Cr-contaminated real groundwater analysis using biochar-based sorbents for practical applicability. This review highlights the significant challenges in biochar-based material applications as green, renewable, and cost-effective adsorbents for the remediation of Cr(VI). Further recommendations and future scope for the implications of advanced novel biochar materials for Cr(VI) removal and other heavy metals are elegantly discussed.

Photocatalytic degradation of paracetamol and bisphenol A by chitosan supported covalent organic framework thin film with visible light irradiation

Covalent Organic Frameworks (COFs) have attracted extensive attention for the photocatalytic degradation of emerging organic contaminants. The difficulty in separation and recovery after use yet would hinder the practical application of COFs in powder form. In present study, COFs in film form were fabricated via using chitosan as the film-substrate to support COFs (CSCF). We found that CSCF could effectively degrade two types of emerging organic contaminants under visible light irradiation. Particularly, CSCF could effectively degrade 99.8% of paracetamol (PCT) and 94.0% of bisphenol A (BPA) within 180 min under visible light irradiation. •O₂^- and h⁺ played dominant roles during the photocatalytic degradation process. Hydroxylation and cleavage were the main degradation processes. CSCF exhibited good photocatalytic degradation performance in a broad range of ionic strengths, in the presence of common coexisting ions including Cl^-, NO₃^- and SO₄^2-, in a wide range of pH (5-11), and in real water samples including tap water, river water and lake water. Moreover, CSCF could be easily collected after use and exhibited excellent degradation performance in five successive cycles. CSCF has potential applications to treat water with either PCT or BPA contamination. This study provided a new insight into the practical application of COFs.

Adsorption behavior of chromium in an aqueous suspension of δ-alumina in absence and in presence of humic substances

The radioisotope Cr-51 was exploited for studying the chromium adsorption behavior in aqueous media of alumina in aqueous media. Where, it represents 1.8% by weight and exists in earth’s crust in different forms. Factors affecting this adsorption behavior are pH, amount of alumina and humic acid presence. In case of pH adsorption curves, three different areas under peak can be described based on pH changes which lead to the formation of different species too. The first area is the maximum constant adsorption at pH, range 1–3, the second one is adsorption decreasing with increasing pH through pH range 4–7 and the third one is step-down adsorption at higher pH range. The increasing amount of alumina leads to increase in the percent adsorption, where 10 and 2 g/l alumina were found to have 100% while in case of 0.2 g/l it is 80%. The presence of humic acid decreases the adsorption of chromate with increasing pH to be 30% comparing to 80% in case of 0.2 g/l alumna at pH 2. This can be also indicated by adsorption capacity which is found to be 436.8 μg/g in case of 0.2 g alumina; and it decreases in presence of Humic Acid (HA) to 145.8 μg/g at same weight of alumina. Also, the equilibrium capacities are found as 54.6 μg/g for 2 g/l and 1.2 μg/g for 10 g/l. Triple layer model (TLM) was used for simulation of chromium adsorption behavior in presence of alumina with the applied conditions of study. The results showed high coincidence with the practically found data.

Graphitic carbon nitride/NH2-MIL-101(Fe) composite for environmental remediation: Visible-light-assisted photocatalytic degradation of acetaminophen and reduction of hexavalent chromium

Herein, an efficient photocatalyst composed of graphitic carbon nitrate and iron-based metal-organic framework (g-C₃N₄/NH₂-MIL-101(Fe)) composite was fabricated by a solvothermal method for the degradation of acetaminophen (AAP) and reduction of Cr(VI) under sunlight illumination. The composite was confirmed by X-ray diffraction. UV-visible spectra showed that the bare g-C₃N₄, pure Fe-MOF, and composite harvest solar light effectively. The photocatalytic experiment indicated that the composite exhibited superior reduction efficiency of Cr(VI) (66%) compared to the bare g-C₃N₄ (35%) and pure Fe-MOF (51%) at pH 7. As the pH decreases from 9 to 2, the reduction efficiency increased. The highest Cr(VI) reduction (91%) was observed at pH 2. On the other hand, the catalyst degraded 94% of AAP at pH 7 compared to the bare g-C₃N₄ (42%) and pure Fe-MOF (60%) in the presence of hydrogen peroxide. A radical scavenger experiment endorsed that the generation of superoxide radicals was the main reason for the AAP degradation. The cyclic stability test indicated that there was no substantial decrease in the degradation efficiency of AAP after ten repeated cycles. The kinetic studies showed that the photodegradation of AAP and reduction Cr(VI) was well-fitted to the first-order kinetics. Gas chromatography-mass spectrometry analysis showed that hydroquinone, aliphatic carboxylic acids, monohydroxy, and dihydroxy paracetamol were the main products formed as a result of such degradation process. Therefore, the iron-based MOF and their composites can be used as effective photocatalysts for pollutants degradation.

Treatment of a wastewater from a galvanizing industry containing chromium(VI) and zinc(II) by liquid surfactant membranes technique

Galvanizing industries generate large amounts of effluents rich in toxic and carcinogenic chromium(VI) species. Effective and sustainable treatments are required to comply with environmental regulations. This work focused on the development of innovative treatments for Cr(VI) by its removal from a galvanizing industry wastewater (pH_initial = 5.9) containing Cr (78 mg.L^-1) and Zn (2178 mg.L^-1) using the liquid surfactant membranes technique. The membrane phase carrier was Alamine® 336 in Escaid™ 110. For a synthetic solution (Cr(VI) = 353mg.L^-1, pH_{internal phase} = 1.5), 99.9% of Cr(VI) was extracted in three stages ([KOH]_{internal phase} = 0.27 mol.L^-1). For the galvanizing wastewater, two selective extractions treatments were proposed: (1) 87% of Cr(VI) and 2% of Zn(II) were extracted in a single stage ([HCl]_{feed phase} = 0.03 mol.L^-1, [KOH]_{internal phase} = 0.6 mol.L^-1); (2) 95.6% of Cr(VI) and practically no zinc were extracted in a single stage ([HCl] _{feed phase} = 10^-6mol.L^-1, [HCl] _{internal phase} = 5mol.L^-1). In another treatment condition ([HCl] _{feed phase} = 2mol.L^-1 and [KOH] _{internal phase} = 1.2 mol.L^-1), the simultaneous Cr(VI) and Zn(II) extractions (95% and 70%, respectively) were obtained in a single stage and more than 99% of both metals in three stages. This resulted in a depleted feed phase with 0.01 mg.L^-1 of Cr(VI), that allows its discharge, according to the Brazilian legislation (≤0.1 mg/L).