Photocatalytic Degradation and Antibacterial Properties of Fe3+-Doped Alkalized Carbon Nitride

Modulation of π-Electron Density in Ultrathin 2D Layers of Graphite Carbon Nitride for Efficient Photocatalytic Hydrogen Production

The rational design and synthesis of novel semiconductor nano-/quantum materials have been ambitiously pursued in the field of photocatalysis as the technology is promising and critical for attaining future energy and environmental sustainability. Herein, the integrity of aromatic carbon into graphitic carbon nitride (CN) at the same molecular plane with a few 2D layers is achieved by using modulated precursors of CN, forming carbon regulated ultrathin CN (CUCN) with improved charge transfer kinetics and photocatalytic hydrogen production. The grafted graphite rings adjacent to carbon nitride frameworks induce a significant rearrangement and relocalization of the overall framework, and form conjugated sp2 hybridized interfaces and internal electric fields that drive the separation and directional transfer of photogenerated electrons from CN sheets towards intralayer graphite regions, where the photocatalytic hydrogen evolution reaction occurs extensively, yielding largely increased HER rate of 2231.8 µmol g-1 h-1 by 8.2 times relative to CN, as well as a remarkable apparent quantum yield of 2.93% under monochromatic light at 420 nm. The high physicochemical stability and low synthesis cost of CUCN make it a potential benchmark photocatalyst that can be readily modified via element doping, heterojunction introduction, defect engineering, and so on, to further enhance its HER performance.

Graphitic Carbon Nitride Enters the Scene: A Promising Versatile Tool for Biomedical Applications

Graphitic carbon nitride (g-C3N4), since the pioneering work on visible-light photocatalytic water splitting in 2009, has emerged as a highly promising advanced material for environmental and energetic applications, including photocatalytic degradation of pollutants, photocatalytic hydrogen generation, and carbon dioxide reduction. Due to its distinctive two-dimensional structure, excellent chemical stability, and distinctive optical and electrical properties, g-C3N4 has garnered a considerable amount of interest in the field of biomedicine in recent years. This review focuses on the fundamental properties of g-C3N4, highlighting the synthesis and modification strategies associated with the interfacial structures of g-C3N4-based materials, including heterojunction, band gap engineering, doping, and nanocomposite hybridization. Furthermore, the biomedical applications of these materials in various domains, including biosensors, antimicrobial applications, and photocatalytic degradation of medical pollutants, are also described with the objective of spotlighting the unique advantages of g-C3N4. A summary of the challenges faced and future prospects for the advancement of g-C3N4-based materials is presented, and it is hoped that this review will inspire readers to seek further new applications for this material in biomedical and other fields.

Fe-doped g-C3N4 with duel active sites for ultrafast degradation of organic pollutants via visible-light-driven photo-Fenton reaction: Insight into the performance, kinetics, and mechanism

The photo-Fenton process provides a sustainable and cost-effective strategy for removing refractory organic contaminants in wastewater. Herein, a high-efficient Fe-doped g-C3N4 photocatalyst (Fe@CN10) with a unique 3D porous mesh structure was prepared by one-pot thermal polymerization for ultrafast degradation of azo dyes, antibiotics, and phenolic acids in heterogeneous photo-Fenton systems under visible light irradiation. Fe@CN10 exhibited a synergy between adsorption-degradation processes due to the co-existence of Fe3C and Fe3N active sites. Specifically, Fe3C acted as an adsorption site for pollutant and H2O2 molecules, while Fe3N acted as a photocatalytic active site for the high-efficient degradation of MO. Resultingly, Fe@CN10 showed a photocatalytic degradation rate of MO up to 140.32 mg/L min-1. The dominant ROS contributed to the removal of MO in the photo-Fenton pathway was hydroxyl radical (•OH). Surprisingly, as the key reactive species, singlet oxygen (1O2) generated from superoxide radical (•O2-) also efficiently attacked MO in a photo-self-Fenton pathway. Additionally, sponge/Fe@CN10 was prepared and filled in the continuous flow reactors for nearly 100% degradation of MO over 150 h when treating artificial organic wastewater. This work provided a facile route to prepare highly-active Fe-doped photocatalysts and develop a green photocatalytic system for wastewater treatment in the future.

A cohesive effort to assess the suitability and disparity of carbon nanotubes for water treatment

Population growth, industrialization, and the extensive use of chemicals in daily life have all contributed to an increase in waste generation and an intensified release of organic pollutants into the aquatic environment. To ensure the quality of water (including natural resources), the removal of these pollutants from wastewater has become a challenging task for scientific community. Conventional physical, chemical, and biological treatment methods are commonly used in combinations and are not very effective. Recently, carbon nanotubes (CNTs) emerged as the most reliable and adaptable choice for efficient water treatment due to their extraordinary material properties appearing as a single-step solution for water treatment. High surface area, exceptional porosities, hollow and layered structures, and ease of chemical activation and functionalization are some properties which makes it excellent adsorption material. Hence, this review paper discusses the recent advances in the synthesis, purification, and functionalization of CNTs for water and wastewater treatment. In addition, this study also also provides a quick overview of CNTs-based advance technologies employed in water treatment and carefully assesses the benefits versus risks during large-scale water treatment. Furthermore, it concludes that identified risks to the environment and human health cannot be easily ignored and strict regulatory requirements are a must for producing low-cost innoxious CNTs.

Alkali metal doped crystalline g-C3N4 with an enriched cyano group for visible-light photocatalytic degradation of methylamine

In this study, alkali-metal-doped crystalline g-C3N4 with an enriched cyano group was synthesized using the molten salt method and used for the visible-light photocatalytic degradation of methylamine (MA), a common organic amine compound with a low odor threshold. Different types and proportions of melting salts (Li, K, and Na) were added during secondary calcination to regulate the morphology, crystallinity, and surface defects of graphitic carbon nitride (g-C3N4). With molten salt treatment matched the melting point of the binary salt system, a cyano group and alkali metal co-doped crystalline g-C3N4 with a high surface area and good crystallinity were prepared. Co-decorating the alkali metal and cyano groups on crystalline g-C3N4 facilitated the adsorption of MA, realized an excellent photo-charge transfer efficiency, and generated more superoxide radicals. Compared with pristine g-C3N4 (PCN), the apparent rate constant of LiK15 : 5-CCN for the degradation of MA increased by 10.2 times and the degradation efficiency of 1000 ppm MA gas was 93.1% after 90 min of irradiation with visible light, whereas the degradation efficiency of PCN was 19.2%.

Enhanced photocatalytic activity of S-doped graphitic carbon nitride hollow microspheres: Synergistic effect, high-concentration antibiotic elimination and antibacterial behavior

For the past few years, graphitic carbon nitride (g-C₃N₄) has been widely used to eliminate environmental pollutants, but limited active site on surface and low separation/migration ability suppress its practical uses. Herein, we adopted a supramolecular self-assembly route followed with S doping to synthesize S-doped g-C₃N₄ with a hollow microsphere composition (SCNHM), where the shell was demonstrated to compose of ultrathin nanosheets. The unique structural characteristics endow the SCNHM with high specific surface area (∼81 m² g^-1) to provide abundant reaction sites and enhanced light-harvesting due to the light-scattering effect of hollow structure. Moreover, the S dopant meliorated the electronic structure to narrow the bandgap and promoted the charge separation/transfer capability. With this synergistic effect, the SCNHM presented greatly improved photocatalytic activity for degrading tetracycline hydrochloride (TC) compared to the CN, SCN and CNHM samples. This photocatalyst could eliminate high-concentration TC (50 mg L^-1) in 18 min, and the 30 min removal efficiencies of 100 mg L^-1 and 200 mg L^-1 reached 92 % and 60 %, which is much better than the reported photocatalysts in literatures (usually ≤ 20 mg L^-1). Additionally, the good photocatalytic durability was confirmed and the degradation pathway of TC was proposed. Furthermore, the SCNHM was proved to meanwhile possess superior performance for inactivating the typical Gram-positive bacterium of Staphylococcus aureus (S. aureus) and the typical Gram-negative bacterium of Escherichia coli (E. coli). Finally, based on determination of band alignment and detection of active species, a plausible photocatalytic mechanism was proposed.

Microwave Synthesis of Visible-Light-Activated g-C3N4/TiO2 Photocatalysts

The preparation of visible-light-driven photocatalysts has become highly appealing for environmental remediation through simple, fast and green chemical methods. The current study reports the synthesis and characterization of graphitic carbon nitride/titanium dioxide (g-C₃N₄/TiO₂) heterostructures through a fast (1 h) and simple microwave-assisted approach. Different g-C₃N₄ amounts mixed with TiO₂ (15, 30 and 45 wt. %) were investigated for the photocatalytic degradation of a recalcitrant azo dye (methyl orange (MO)) under solar simulating light. X-ray diffraction (XRD) revealed the anatase TiO₂ phase for the pure material and all heterostructures produced. Scanning electron microscopy (SEM) showed that by increasing the amount of g-C₃N₄ in the synthesis, large TiO₂ aggregates composed of irregularly shaped particles were disintegrated and resulted in smaller ones, composing a film that covered the g-C₃N₄ nanosheets. Scanning transmission electron microscopy (STEM) analyses confirmed the existence of an effective interface between a g-C₃N₄ nanosheet and a TiO₂ nanocrystal. X-ray photoelectron spectroscopy (XPS) evidenced no chemical alterations to both g-C₃N₄ and TiO₂ at the heterostructure. The visible-light absorption shift was indicated by the red shift in the absorption onset through the ultraviolet-visible (UV-VIS) absorption spectra. The 30 wt. % of g-C₃N₄/TiO₂ heterostructure showed the best photocatalytic performance, with a MO dye degradation of 85% in 4 h, corresponding to an enhanced efficiency of almost 2 and 10 times greater than that of pure TiO₂ and g-C₃N₄ nanosheets, respectively. Superoxide radical species were found to be the most active radical species in the MO photodegradation process. The creation of a type-II heterostructure is highly suggested due to the negligible participation of hydroxyl radical species in the photodegradation process. The superior photocatalytic activity was attributed to the synergy of g-C₃N₄ and TiO₂ materials.

Multivalent Effect of Defect Engineered Ag2S/g-C3N4 3D Porous Floating Catalyst with Enhanced Contaminant Removal Efficiency

Chlorophenols, as a major environmental pollutant, enter water systems through industrial wastewater, agricultural runoff and chemical spills, and they are stable, persistent under natural conditions, and highly hazardous to water resources. The objective of this article is to prepare Ag2S-modified C3N4 three-dimensional network photocatalyst by calcination method to use photocatalysis as an efficient, safe, and environmentally friendly method to degrade chlorophenols. Ag2S/C3N4 has an excellent visible light absorption range, low band gap, effective separation of photogenerated charges, and active free radicals production, all of which make for the enhancement of photocatalytic degradation performance of the Ag2S/C3N4 system. Under the light irradiation (λ ≥ 420 nm), the photocatalytic degradation efficiency of 2,4,6-Trichlorophenol reach 95% within 150 min, and the stable photocatalytic degradation activity can still be maintained under different pH water environment and four degradation cycles. When Ag2S is loaded on ACNs, more photogenerated electrons are generated and subsequent reactions produce highly reactive groups such as •O2- and •OH that will originally be able to continuously attack TCP molecules to degrade pollutants. Therefore, this study shows that the photocatalyst provides a novel research approach for realizing the application in the field of pollutant degradation.

Anion-Cation Co-Doped g-C3N4 Porous Nanotubes with Efficient Photocatalytic H2 Evolution Performance

Graphitic C₃N₄-based materials are promising for photocatalytic H₂ evolution applications, but they still suffer from low photocatalytic activity due to the insufficient light absorption, unfavorable structure and fast recombination of photogenerated charge. Herein, a novel anion-cation co-doped g-C₃N₄ porous nanotube is successfully synthesized using a self-assembly impregnation-assisted polymerization method. Ni ions on the surface of the self-assembly nanorod precursor can not only cooperate with H₃P gas from the thermal cracking of NaH₂PO₂ as an anion-cation co-doping source, but, more importantly, suppress the shape-collapsing effect of the etching of H₃P gas due to the strong coordinate bonding of Ni-P, which leads to a Ni and P co-doped g-C₃N₄ porous nanotube (PNCNT). Ni and P co-doping can build a new intermediate state near the conduction band in the bandgap of the PNCNT, and the porous nanotube structure gives it a higher BET surface area and light reflection path, showing a synergistic ability to broaden the visible-light absorption, facilitate photogenerated charge separation and the light-electron excitation rate of g-C₃N₄ and provide more reaction sites for photocatalytic H₂ evolution reaction. Therefore, as expected, the PNCNT exhibits an excellent photocatalytic H₂ evolution rate of 240.91 μmol·g^-1·h^-1, which is 30.5, 3.8 and 27.8 times as that of the pure g-C₃N₄ nanotube (CNT), single Ni-doped g-C₃N₄ nanotube (NCNT) and single P-doped g-C₃N₄ nanotube (PCNT), respectively. Moreover, the PNCNT shows good stability and long-term photocatalytic H₂ production activity, which makes it a promising candidate for practical applications.

Oxidative Injury in Ischemic Stroke: A Focus on NADPH Oxidase 4

Ischemic stroke is a leading cause of disability and mortality worldwide. Thus, it is urgent to explore its pathophysiological mechanisms and find new therapeutic strategies for its successful treatment. The relationship between oxidative stress and ischemic stroke is increasingly appreciated and attracting considerable attention. ROS serves as a source of oxidative stress. It is a byproduct of mitochondrial metabolism but primarily a functional product of NADPH oxidases (NOX) family members. Nicotinamide adenine dinucleotide phosphate oxidase 4 (NOX4) is most closely related to the formation of ROS during ischemic stroke. Its expression is significantly upregulated after cerebral ischemia, making it a promising target for treating ischemic stroke. Several drugs targeting NOX4, such as SCM-198, Iso, G-Rb1, betulinic acid, and electroacupuncture, have shown efficacy as treatments of ischemic stroke. MTfp-NOX4 POC provides a novel insight for the treatment of stroke. Combinations of these therapies also provide new approaches for the therapy of ischemic stroke. In this review, we summarize the subcellular location, expression, and pathophysiological mechanisms of NOX4 in the occurrence and development of ischemic stroke. We also discuss the therapeutic strategies and related regulatory mechanisms for treating ischemic stroke. We further comment on the shortcomings of current NOX4-targeted therapy studies and the direction for improvement.

Facile Preparation of Wormlike Graphitic Carbon Nitride for Photocatalytic Degradation of Ustiloxin A

Natural toxic contaminants have been recognized as threats to human health. Ustiloxins are the toxic secondary metabolites of fungus generated from rice false smut disease, which are harmful to animal/human reproduction and growth. However, there are rare researches on the control and reduction of ustiloxins through physical, chemical and biological ways. Herein, we demonstrated that photocatalysis of semiconductor nanomaterials could be as a potential way to degrade or mitigate the contamination of ustiloxin A. A kind of wormlike graphitic carbon nitride (g-C₃N₄) was facilely prepared from modified dicyandiamide precursor via pyrolysis method and characterized by X-ray diffraction, high-resolution transmission electron microscope and X-ray photoelectron spectroscopy etc. It was found that g-C₃N₄ from modified dicyandiamide precursor showed better activity for ustiloxin A degradation under visible light irradiation than that of pristine g-C₃N₄. This was ascribed to the lager specific surface area, more uniform microstructure, better photogenerated charges separation and transformation of wormlike g-C₃N₄ compared with pristine g-C₃N₄. Most important, the structure of degradation intermediates and the possible pathway were proposed based on the results of high-performance liquid chromatography-mass spectrometry after 80 min photoreaction treatment. Our findings may provide a green, efficient way for ustiloxins mitigation and useful information for future study.