Optimization Method of the Solvothermal Parameters Using Box-Behnken Experimental Design-The Case Study of ZnO Structural and Catalytic Tailoring

Photocatalytic degradation of Alizarin Red contaminant using Ag2CrO4@NiFe-LDH composite under visible light irradiation

In this study, Ag2CrO4@NiFe-LDH nanoparticles were synthesized by hydrothermal method for photocatalytic degradation of Alizarin Red (AR) dye. Three composites with different molar percentages were prepared, among which 50%Ag2CrO4@50%NiFe-LDH composite was the best sample with a removal rate of 97.1% in AR degradation. Also, the properties, structure, and characteristics of pure Ag2CrO4 and NiFe-LDH and their composites were determined by XRD, FESEM, FTIR, EDX mapping, and UV-visible analyses. It was found that Ag2CrO4@NiFe-LDH composites with the formation of heterogeneous structure of Z-scheme, in addition to increasing the active sites and increasing the specific surface, decrease the recombination rate of pure Ag2CrO4 and NiFe-LDH. Also, the Box-Behnken design technique, which is one of the most common designs used in response surface methodology, was used to optimize the operating conditions and investigate the effect of 4 independent parameters: catalyst amount, solution concentration, pH, and light intensity. The importance of independent parameters and their interactions were determined by ANOVA. By means of numerical optimization, the optimal values of the selected parameters equal to 1.34 g/L of catalyst, concentration of 16.45 mg/L, pH = 10.74, and light intensity of 15.53 W were obtained as optimal conditions with a desirability coefficient of 1.00 and an absorption value of 89.34%. The closeness of adjusted R2 (0.9838) and predicted R2 (0.9507) values show that this model can be successfully used for prediction.

Phytochemicals, Health-Promoting Effects, and Enzyme Inhibition Traits of Phlomis stewartii Extracts

Phlomis stewartii is a wild, perennial woody plant used for diverse therapeutic targets. The present work evaluated the influence of independent variables such as extraction time, solvent concentration, and speed in the range of (100 mL, 150 mL, and 200 mL), (2 h, 5 h, and 8 h), and (100 rpm, 150 rpm, and 200 rpm), respectively, on extraction yields, phytochemical components, total phenolic contents (TPC), and total flavonoid contents (TFC) of P. stewartii extract. In the present work, response surface methodology (RSM) was applied to optimize the extraction yield. High-performance liquid chromatography (HPLC) was performed to detect the bioactive constituents of the extracts. The potent extracts were analyzed to study α-amylase and α-glucosidase inhibitory activities. Under the optimized conditions of solvent concentration (200 mL), extraction time (8 h), and speed (150 rpm), the whole plant methanol extract (WPME) showed a maximum extraction yield of 13.5%, while the leaves methanol extract (LME) showed a maximum TPC of 19.5 ± 44 mg of gallic acid equivalent (GAE) per gram of extract and a maximum TFC of 4.78 ± 0.34 mg of quercetin equivalent (QE) per gram of extract. HPLC analysis showed the presence of p-coumaric, gallic acid, quercetin, salicylic acid, sinapic acid, and vanillic acid. LME showed the highest α-amylase inhibitory activity (IC50 = 46.86 ± 0.21 µg/mL) and α-glucosidase inhibitory activity (IC50 value of 45.81 ± 0.17 µg/mL). Therefore, in conclusion, LME could be considered to fix the α-amylase and α-glucosidase-mediated disorders in the human body to develop herbal phytomedicine.

Hydroxyapatite-Gold Modified Screen-Printed Carbon Electrode for Selective SARS-CoV-2 Antibody Immunosensor

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), or coronavirus disease 2019 (COVID-19), is still spreading worldwide; therefore, the need for rapid and accurate detection methods remains relevant to maintain the spread of this infectious disease. Electrochemical immunosensors are an alternative method for the rapid detection of the SARS-CoV-2 virus. Herein, we report the development of a screen-printed carbon electrode immunosensor using a hydroxyapatite-gold nanocomposite (SPCE/HA-Au) directly spray-coated with the immobilization receptor binding domain (RBD) Spike to increase the conductivity and surface electrode area. The HA-Au composite synthesis was optimized using the Box-Behnken method, and the resulting composite was characterized by UV-vis spectrophotometry, TEM-EDX, and XRD analysis. The specific interaction of RBD Spike with immunoglobulin G (IgG) antibodies was evaluated by differential pulse voltammetry and electrochemical impedance spectroscopy methods in a [Fe(CN)6]4-/3- solution redox system. The IgG was detected with a detection limit of 0.0561 pg mL-1, and the immunosensor had selectivity and stability of 103-122% and was stable until week 7 with the influence of storage conditions. Also, the immunosensor was tested using real samples from human serum, where the results were confirmed using the chemiluminescent microparticle immunoassay (CMIA) method and showed satisfactory results. Therefore, the developed electrochemical immunosensor can rapidly and accurately detect SARS-CoV-2 antibodies.

Photoinhibitive Properties of α-MoO3 on Its Composites with TiO2, ZnO, BiOI, AgBr, and Cu2O

Orthorhombic molybdenum trioxide (α-MoO₃) is well known as a photocatalyst, adsorbent, and inhibitor during methyl orange photocatalytic degradation via TiO₂. Therefore, besides the latter, other active photocatalysts, such as AgBr, ZnO, BiOI, and Cu₂O, were assessed via the degradation of methyl orange and phenol in the presence of α-MoO₃ using UV-A- and visible-light irradiation. Even though α-MoO₃ could be used as a visible-light-driven photocatalyst, our results demonstrated that its presence in the reaction medium strongly inhibits the photocatalytic activity of TiO₂, BiOI, Cu₂O, and ZnO, while only the activity AgBr is not affected. Therefore, α-MoO₃ might be an effective and stable inhibitor for photocatalytic processes to evaluate the newly explored photocatalysts. Quenching the photocatalytic reactions can offer information about the reaction mechanism. Moreover, the absence of photocatalytic inhibition suggests that besides photocatalytic processes, parallel reactions take place.

Theoretical and experimental study of the photodegradation of methyl orange in the presence of different morphologies of Au-ZnO using Monte Carlo dynamic simulation

Herein, a simple approach was formed based on synthesizing different morphologies of ZnO and Au-ZnO as photocatalyst. In this study, ZnO and Au-ZnO were synthesized via a co-precipitation method and fully characterized via scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDX). Three different ratios of Zn2+:OH- (1:2, 1:3, and 1:5) controlled the morphology of samples, which were made into spindle, star, and flower structures, respectively. Then, the photocatalytic activity was studied and compared. Their comparison showed that the flower morphology for ZnO and Au-ZnO was more effective in photocatalytic degradation and decolorization of methyl orange dye. Also, quantum and Monte Carlo (MC) calculations were carried out to investigate the adsorption of methyl orange (MO) molecules on ZnO(111) surface in the presence of Au or without Au in aqueous conditions by Monte Carlo adsorption locator simulations in the Materials Studio 2017 software. Au created a tendency to form a relatively strong interaction of MO with the ZnO(111) surface. The adsorption of MO on Au-ZnO(111) in the presence of Au was more significant than that of MO on ZnO(111), suggesting Au could significantly improve the reactivity of the methyl orange toward the ZnO(111).

Insight into the Growth Mechanism and Photocatalytic Behavior of Tubular Hierarchical ZnO Structures: An Integrated Experimental and Theoretical Approach

The hydrothermal synthesis of zinc oxide (ZnO) particles from zinc acetylacetonate monohydrate in "pure" aqueous solution and in aqueous NaOH solution at 90 °C is reported. The structural and morphological properties of ZnO particles were investigated by powder X-ray diffraction, X-ray absorption spectroscopy (XAS), field emission scanning electron microscopy, and transmission electron microscopy. The effect of NaOH on the growth mechanism and photocatalytic performance of hierarchical ZnO structures was investigated. The experimental findings, supported by results of quantum chemical calculations at the level of density functional theory, were used to propose the mechanism of nucleation and preferential growth of finely tuned hollow and nonhollow ZnO structures and their effects on the photocatalytic activity. The calculations indicate that the process of ZnO nucleation in "pure" aqueous solution mainly proceeds by the reaction of small monomers, while tetramers play a crucial role in aqueous NaOH solution. Both the preferred ZnO nanostructure and microstructure growth processes are driven by O-H···O hydrogen bonds as controlling elements. The calculated values of the E_O···H interaction indicate a stronger interaction via O-H···O hydrogen bonds in "pure" aqueous media (E_O···H = -11.73 kcal mol^-1) compared to those obtained in aqueous NaOH solution (E_O···H = -8.41 kcal mol^-1). The specific structural motif of the (ZnO-H₂O)₁₂ dodecamers with calculated negative ΔG*_INT free release energy indicates that the formation of anisotropic nanocrystalline ZnO with the c-axis as the primary growth direction is spontaneous and accelerated exclusively in "pure" aqueous solution, whereas it is an unfavorable endergonic process in aqueous NaOH solution (ΔG*_INT > 0). Efforts have been made to determine the photocatalytic efficiency of the ZnO samples based on the XAS measurements. ZnO particles obtained in "pure" aqueous solution show the highest photocatalytic activity due to the presence of a larger amount of oxygen vacancies.