Association of Graphene Silver Polymethyl Methacrylate (PMMA) with Photodynamic Therapy for Inactivation of Halitosis Responsible Bacteria in Denture Wearers

Graphene-based metal/metal oxide nanocomposites as potential antibacterial agents: a mini-review

Antimicrobial resistance (AMR) is a rising issue worldwide, which is increasing prolonged illness and mortality rates in the population. Similarly, bacteria have generated multidrug resistance (MDR) by developing various mechanisms to cope with existing antibiotics and therefore, there is a need to develop new antibacterial and antimicrobial agents. Biocompatible nanomaterials like graphene and its derivatives, graphene oxide (GO), and reduced graphene oxide (rGO) loaded with metal/metal oxide nanoparticles have been explored as potential antibacterial agents. It is observed that nanocomposites of GO/rGO and metal/metal oxide nanoparticles can result in the synthesis of less toxic, more stable, controlled size, uniformly distributed, and cost-effective nanomaterials compared to pure metal nanoparticles. Antibacterial studies of these nanocomposites show their considerable potential as antibacterial and antimicrobial agents, however, issues like the mechanism of antimicrobial action and their cytotoxicity need to be explored in detail. This review highlights a comparative analysis of graphene-based metal and metal oxide nanoparticles as potential antibacterial agents against AMR and MDR.

Microstructural characterization, mechanical and microbiological properties of acrylic resins added with reduced graphene oxide

To evaluate the microstructural characterization, mechanical properties and antimicrobial activity of acrylic resins incorporated with different concentrations of reduced graphene oxide (rGO). Specimens were made of self-cured and heat-cured acrylic resins for the control group and concentrations of 0.5%, 1%, and 3%. The microstructural characterization was evaluated by scanning electron microscopy (SEM) and energy-dispersive X-ray (EDS). For mechanical testing, flexural strength, and Knoop hardness tests were performed. Microbiological evaluations were performed by colony forming units (CFU) analysis, tetrazolium salt reduction (XTT), and SEM images. The modified acrylic resins showed increased mechanical properties at low concentrations (p < 0.05) and with reduced S. mutans (p < 0.05). Reduced graphene oxide interfered with the mechanical performance and microbiological properties of acrylic resins depending on the concentration of rGO, and type of polymerization and microorganism evaluated. The incorporation of graphene compounds into acrylic resins is an alternative to improve the antimicrobial efficacy and performance of the material.

The Effect of Photodynamic Therapy on Enterococcus spp. and Its Application in Dentistry: A Scoping Review

Enterococci spp. are Gram-positive bacteria that cause mild to severe infections, many associated with the oral cavity, such as periapical infections and healthcare-associated infections (HAIs). Many of these infections become serious diseases that are difficult to resolve, specifically when multidrug-resistant (MDR) strains cause them. In recent years, the number of MDR strains of Enterococcus spp. has increased significantly. This increased prevalence of MDR strains produces significant pressure to generate more antimicrobial therapies, but there is a decline in the production of new antibiotics, driving the development of complementary therapies, such as photodynamic therapy (PDT). PDT combines a photosensitizer agent (PS), light, and oxygen to cause photooxidative stress in bacterial cells. PDT can eradicate Enterococcus spp. contaminations, improve the classic cleaning processes, and eradicate the bacteria in dental pieces. PDT's effectiveness can be improved with nanoparticles that function as carriers. Our work aims to describe the advances in PDT against Enterococcus spp. as a complement to antibiotic therapy, focusing on infections by Enterococcus faecium and Enterococcus faecalis, dental hygiene, and using nanoparticles to improve the antimicrobial effect. A systematic bibliographic search without a meta-analysis was conducted on various databases, using inclusion and exclusion criteria to identify the most relevant research. Of the 193 non-redundant articles found, 65 were selected for a systematic review, from which a summary table was created and a manual description was made. Photodynamic therapy for treating E. faecium and E. faecalis is a widely studied area, with promising results concerning bactericidal effectiveness and reductions in biofilm formation, particularly in regard to dental hygiene. Because most of the studies were conducted in vitro or ex vivo, the results indicated that there were not sufficient data to initiate clinical trials for safety and efficacy studies on humans.

Mapping the research landscape of nanoparticles and their use in denture base resins: a bibliometric analysis

BACKGROUND

Nanoparticles are increasingly used in dentistry for various applications, including enhancing the mechanical properties of denture base resins. This study aimed to comprehensively review and analyze the research landscape of nanoparticles and their effect on the flexural strength of denture base resins to identify key research areas and trends and to highlight the importance of collaboration between authors and institutions.

METHODS

A Bibliometric Analysis was conducted using the Keywords "Nanoparticle*" AND "Denture*" OR "CAD/CAM." The literature search from the WOS database was restricted to the publication years 2011 to 2022.

RESULTS

Key findings encompass an increase in research publications but a decline in citations. Saudi Arabia, China, and Iraq led this research, with specific institutions excelling. Notable journals with high impact factors were identified. Authorship patterns show variations in citation impact. Additionally, keyword analysis revealed that current research trends offer insights into influential authors and their networks.

CONCLUSIONS

The analysis of nanoparticles and denture base resins reveals a dynamic and evolving landscape that emphasizes the importance of collaboration, staying current with research trends, and conducting high-quality research in this ever-evolving domain.

Mechanophysical and Anti-Adhesive Properties of a Nanoclay-Containing PMMA Denture Resin

Poly(methyl methacrylate) (PMMA) is commonly used for dental dentures, but it has the drawback of promoting oral health risks due to oral bacterial adhesion. Recently, various nanoparticles have been incorporated into PMMA to tackle these issues. This study aims to investigate the mechanophysical and antimicrobial adhesive properties of a denture resin by incorporating of nanoclay into PMMA. Specimens were prepared by adding 0, 1, 2, and 4 wt % surface-modified nanoclay (Sigma) to self-polymerizing PMMA denture resin. These specimens were then evaluated using FTIR, TGA/DTG, and FE-SEM with EDS. Various mechanical and surface physical properties, including nanoindentation, were measured and compared with those of pure PMMA. Antiadhesion experiments were conducted by applying a Candida albicans (ATCC 11006) suspension to the surface of the specimens. The antiadhesion activity of C. albicans was confirmed through a yeast-wall component (mannan) and mRNA-seq analysis. The bulk mechanical properties of nanoclay-PMMA composites were decreased compared to those of pure PMMA, while the flexural strength and modulus met the ISO 20795-1 requirement. However, there were no significant differences in the nanoindentation hardness and elastic modulus. The surface energy revealed a significant decrease at 4 wt % nanoclay-PMMA. The antiadhesion effect of Candida albicans was evident along with nanoclay content in the nanocomposites and confirmed by the reduced attachment of mannan on nanoclay-PMMA composites. mRNA-seq analysis supported overall transcriptome changes in altering attachment and metabolism behaviors on the surface. The nanoclay-PMMA materials showed a lower surface energy as the content increased, leading to an antiadhesion effect against Candida albicans. These findings indicate that incorporating nanoclay into PMMA surfaces could be a valuable strategy for preventing the fungal biofilm formation of denture base materials.

Research Progress of Photodynamic Therapy in Wound Healing: A Literature Review

Light is an efficient technique that has a significant influence on contemporary medicine. Photodynamic therapy (PDT), which involves the combined action of photosensitizers (PSs), oxygen, and light, has emerged as a therapeutically promising method for treating a broad variety of solid tumors and infectious diseases. Photodynamic therapy is minimally invasive, has few side effects, lightens scars, and reduces tissue loss while preserving organ structure and function. In particular, PDT has a high healing potential for wounds (PDT stimulates wound healing by enhancing re-epithelialization, promoting angiogenesis as well as modulating skin homeostasis). Wound healing involves interactions between many different processes, including coagulation, inflammation, angiogenesis, cellular migration, and proliferation. Poor wound healing with diabetes or extensive burns remains a difficult challenge. This review emphasizes PDT as a potential research field and summarizes PDT's role in wound healing, including normal wounds, chronic wounds, and aging wounds.

Photoinactivation and Photoablation of Porphyromonas gingivalis

Several types of phototherapy target human pathogens and Porphyromonas gingivitis (Pg) in particular. The various approaches can be organized into five different treatment modes sorted by different power densities, interaction times, effective wavelengths and mechanisms of action. Mode 1: antimicrobial ultraviolet (aUV); mode 2: antimicrobial blue light (aBL); mode 3: antimicrobial selective photothermolysis (aSP); mode 4: antimicrobial vaporization; mode 5: antimicrobial photodynamic therapy (aPDT). This report reviews the literature to identify for each mode (a) the putative molecular mechanism of action; (b) the effective wavelength range and penetration depth; (c) selectivity; (d) in vitro outcomes; and (e) clinical trial/study outcomes as these elements apply to Porphyromonas gingivalis (Pg). The characteristics of each mode influence how each is translated into the clinic.

In Vitro Studies of Graphene for Management of Dental Caries and Periodontal Disease: A Concise Review

Graphene is a single-layer two-dimensional carbon-based nanomaterial. It presents as a thin and strong material that has attracted many researchers’ attention. This study provides a concise review of the potential application of graphene materials in caries and periodontal disease management. Pristine or functionalized graphene and its derivatives exhibit favorable physicochemical, mechanical, and morphological properties applicable to biomedical applications. They can be activated and functionalized with metal and metal nanoparticles, polymers, and other small molecules to exhibit multi-differentiation activities, antimicrobial activities, and biocompatibility. They were investigated in preventive dentistry and regenerative dentistry. Graphene materials such as graphene oxide inhibit cariogenic microbes such as Streptococcus mutans. They also inhibit periodontal pathogens that are responsible for periodontitis and root canal infection. Graphene-fluorine promotes enamel and dentin mineralization. These materials were also broadly studied in regenerative dental research, such as dental hard and soft tissue regeneration, as well as periodontal tissue and bone regeneration. Graphene oxide-based materials, such as graphene oxide-fibroin, were reported as promising in tissue engineering for their biocompatibility, bioactivity, and ability to enhance cell proliferation properties in periodontal ligament stem cells. Laboratory research showed that graphene can be used exclusively or by incorporating it into existing dental materials. The success of laboratory studies can translate the application of graphene into clinical use.

Nanomaterials enabling clinical translation of antimicrobial photodynamic therapy

Antimicrobial photodynamic therapy (aPDT) has emerged as a promising approach to aid the fight against looming antibiotic resistance. aPDT harnesses the energy of light through photosenstizers to generate highly reactive oxygen species that can inactivate bacteria and fungi with no resistance. To date aPDT has shown great efficacy against microbes causing localized infections in the skin and the oral cavity. However, its wide application in clinical settings has been limited due to both physicochemical and biological challenges. Over the past decade nanomaterials have contributed to promoting photosensitizer performance and aPDT efficiency, yet further developments are required to establish accredited treatment options. In this review we discuss the challenges facing the clinical application of aPDT and the opportunities that nanotechnology may offer to promote the safety and efficiency of aPDT.

The Problem of Halitosis in Prosthetic Dentistry, and New Approaches to Its Treatment: A Literature Review

The aim of this work is a review of recent scientific literature about intra-oral halitosis among patients using dentures. Halitosis is a condition in which an unpleasant smell comes out of the oral cavity, which is caused mainly by volatile sulfur and non-sulfured compounds. The etiology of halitosis may be intra- or extra-oral; in most patients, however, it is due to the activity of microorganisms in the oral cavity. The problem of the occurrence of intra-oral halitosis has accompanied patients for many years. In dental prosthetics, the problem of halitosis occurs in patients using removable or fixed dentures. In both cases, new niches for the development of microorganisms may be created, including those related to intra-oral halitosis. It should be noted that dentures—both fixed and removable—are a foreign body placed in the patient’s oral cavity which, in case of insufficient hygiene, may constitute a reservoir of microorganisms, causing this unpleasant condition. Conventional treatment of intraoral halitosis reduces microbial activity via chemical and/or mechanical action. Currently, the search for new strategies in the treatment of halitosis is in progress. One idea is to use photodynamic therapy, while another is to modify poly(methyl methacrylate) (PMMA) with silver and graphene nanoparticles. Additionally, attempts have been made to combine those two methods. Another unconventional method of treating halitosis is the use of probiotics.

Nanostructures as Targeted Therapeutics for Combating Oral Bacterial Diseases

Pathogenic oral biofilms are now recognized as a key virulence factor in many microorganisms that cause the heavy burden of oral infectious diseases. Recently, new investigations in the nanotechnology field have propelled the development of novel biomaterials and approaches to control bacterial biofilms, either independently or in combination with other substances such as drugs, bioactive molecules, and photosensitizers used in antimicrobial photodynamic therapy (aPDT) to target different cells. Moreover, nanoparticles (NPs) showed some interesting capacity to reverse microbial dysbiosis, which is a major problem in oral biofilm formation. This review provides a perspective on oral bacterial biofilms targeted with NP-mediated treatment approaches. The first section aims to investigate the effect of NPs targeting oral bacterial biofilms. The second part of this review focuses on the application of NPs in aPDT and drug delivery systems.