Bottom-Up Fabrication of DNA-Templated Electronic Nanomaterials and Their Characterization

DNA-Templated Nanofabrication of CdS-Au Nanoscale Schottky Contacts and Electrical Characterization

DNA-templated nanofabrication presents an innovative approach to creating self-assembled nanoscale metal-semiconductor-based Schottky contacts, which can advance nanoelectronics. Herein, we report the successful fabrication of metal-semiconductor Schottky contacts using a DNA origami scaffold. The scaffold, consisting of DNA strands organized into a specific linear architecture, facilitates the competitive arrangement of Au and CdS nanorods, forming heterojunctions, and addresses previous limitations in low electrical conductance making DNA-templated electronics with semiconductor nanomaterials. Electroless gold plating extends the Au nanorods and makes the necessary electrical contacts. Tungsten electrical connection lines are further created by electron beam-induced deposition. Electrical characterization reveals nonlinear Schottky barrier behavior, with electrical conductance ranging from 0.5 × 10-4 to 1.7 × 10-4 S. The conductance of these DNA-templated junctions is several million times higher than with our prior Schottky contacts. Our research establishes an innovative self-assembly approach with applicable metal and semiconductor materials for making highly conductive nanoscale Schottky contacts, paving the way for the future development of DNA-based nanoscale electronics.

Living Synthelectronics: A New Era for Bioelectronics Powered by Synthetic Biology

Bioelectronics, which converges biology and electronics, has attracted great attention due to their vital applications in human-machine interfaces. While traditional bioelectronic devices utilize nonliving organic and/or inorganic materials to achieve flexibility and stretchability, a biological mismatch is often encountered because human tissues are characterized not only by softness and stretchability but also by biodynamic and adaptive properties. Recently, a notable paradigm shift has emerged in bioelectronics, where living cells, and even viruses, modified via gene editing within synthetic biology, are used as core components in a new hybrid electronics paradigm. These devices are defined as "living synthelectronics," and they offer enhanced potential for interfacing with human tissues at informational and substance exchange levels. In this Perspective, the recent advances in living synthelectronics are summarized. First, opportunities brought to electronics by synthetic biology are briefly introduced. Then, strategic approaches to designing and making electronic devices using living cells/viruses as the building blocks, sensing components, or power sources are reviewed. Finally, the challenges faced by living synthelectronics are raised. It is believed that this paradigm shift will significantly contribute to the real integration of bioelectronics with human tissues.

Utilizing peptide-anchored DNA templates for novel programmable nanoparticle assemblies in biological macromolecules: A review

Biological macromolecules such as proteins and DNA are known to self-assemble into various structural moieties with distinct functions. While nucleic acids are the structural building blocks, peptides exemplify diversity as tailorable biochemical units. Thus, combining the scaffold properties of the biomacromolecule DNA and the functionality of peptides could evolve into a powerful method to obtain tailorable nano assemblies. In this review, we discuss the assembly of non-DNA-coated colloidal NPs on DNA/peptide templates using functional anchors. We begin with strategies for directly attaching metallic NPs to DNA templates to ascertain the functional role of DNA as a scaffold. Followed by methods to assemble peptides onto DNA templates to emphasize the functional versatility of biologically abundant DNA-binding peptides. Next, we focus on studies corroborating peptide self-assembling into macromolecular templates onto which NPs can attach to emphasize the properties of NP-binding peptides. Finally, we discuss the assembly of NPs on a DNA template with a focus on the bifunctional DNA-binding peptides with NP-binding affinity (peptide anchors). This review aims to highlight the immense potential of combining the functional power of DNA scaffolds and tailorable functionalities of peptides for NP assembly and the need to utilize them effectively to obtain tailorable hierarchical NP assemblies.

Graphene nanocomposites for real-time electrochemical sensing of nitric oxide in biological systems

Nitric oxide (NO) signaling plays many pivotal roles impacting almost every organ function in mammalian physiology, most notably in cardiovascular homeostasis, inflammation, and neurological regulation. Consequently, the ability to make real-time and continuous measurements of NO is a prerequisite research tool to understand fundamental biology in health and disease. Despite considerable success in the electrochemical sensing of NO, challenges remain to optimize rapid and highly sensitive detection, without interference from other species, in both cultured cells and in vivo. Achieving these goals depends on the choice of electrode material and the electrode surface modification, with graphene nanostructures recently reported to enhance the electrocatalytic detection of NO. Due to its single-atom thickness, high specific surface area, and highest electron mobility, graphene holds promise for electrochemical sensing of NO with unprecedented sensitivity and specificity even at sub-nanomolar concentrations. The non-covalent functionalization of graphene through supermolecular interactions, including π-π stacking and electrostatic interaction, facilitates the successful immobilization of other high electrolytic materials and heme biomolecules on graphene while maintaining the structural integrity and morphology of graphene sheets. Such nanocomposites have been optimized for the highly sensitive and specific detection of NO under physiologically relevant conditions. In this review, we examine the building blocks of these graphene-based electrochemical sensors, including the conjugation of different electrolytic materials and biomolecules on graphene, and sensing mechanisms, by reflecting on the recent developments in materials and engineering for real-time detection of NO in biological systems.

Metallic Nanowires Self-Assembled in Quasi-Circular Nanomolds Templated by DNA Origami

The self-assembly of conducting nanostructures is currently being investigated intensively in order to evaluate the feasibility of creating novel nanoelectronic devices and circuits using such pathways. In particular, methods based on so-called DNA Origami nanostructures have shown great potential in the formation of metallic nanowires. The main challenge of this method is the reproducible generation of very well-connected metallic nanostructures, which may be used as interconnects in future devices. Here, we use a novel design of nanowires with a quasi-circular cross-section as opposed to rectangular or uncontrolled cross-sections in earlier studies. We find indications that the reliability of the fabrication scheme is enhanced and the overall resistance of the wires is comparable to metallic nanostructures generated by electrochemistry or top-down methods. In addition, we observe that some of the nanowires are annealed when passing a current through them, which leads to a clear enhancement for the conductance. We envision that these nanowires provide further steps towards the successful generation of nanoelectronics using self-assembly.

Cation-dependent assembly of hexagonal DNA origami lattices on SiO2 surfaces

DNA origami nanostructures have emerged as functional materials for applications in various areas of science and technology. In particular, the transfer of the DNA origami shape into inorganic materials using established silicon lithography methods holds great promise for the fabrication of nanostructured surfaces for nanoelectronics and nanophotonics. Using ordered DNA origami lattices directly assembled on the oxidized silicon surface instead of single nanostructures would enable the fabrication of functional nanopatterned surfaces with macroscopic dimensions. Here, we thus investigate the assembly of hexagonal DNA lattices from DNA origami triangles on RCA-cleaned silicon wafers with hydroxylated surface oxide by time-lapse atomic force microscopy (AFM). Lattice assembly on the SiO2 surface is achieved by a competition of monovalent and divalent cations at elevated temperatures. Ca2+ is found to be superior to Mg2+ in promoting the assembly of ordered lattices, while the presence of Mg2+ rather results in DNA origami aggregation and multilayer formation at the comparably high Na+ concentrations of 200 to 600 mM. Furthermore, Na+ concentration and temperature have a similar effect on lattice order, so that a reduction of temperature can be compensated to some extent by an increase in Na+ concentration. However, even under optimized conditions, the DNA origami lattices assembled on the SiO2 surface exhibit a lower degree of order than equivalent lattices assembled on mica, which is attributed to a higher desorption rate of the DNA origami nanostructures. Even though this high desorption rate also complicates any post-assembly treatment, the formed DNA origami lattices could successfully be transferred into the dry state, which is an important prerequisite for further processing steps.

Interrupted DNA and Slow Silver Cluster Luminescence

A DNA-silver cluster conjugate is a hierarchical chromophore with a partly reduced silver core embedded within the DNA nucleobases that are covalently linked by the phosphodiester backbone. Specific sites within a polymeric DNA can be targeted to spectrally tune the silver cluster. Here, the repeated (C₂A)₆ strand is interrupted with a thymine, and the resulting (C₂A)₂-T-(C₂A)₄ forms only Ag₁₀⁶⁺, a chromophore with both prompt (∼1 ns) green and sustained (∼10² μs) red luminescence. Thymine is an inert placeholder that can be removed, and the two fragments (C₂A)₂ and (C₂A)₄ also produce the same Ag₁₀⁶⁺ adduct. In relation to (C₂A)₂T(C₂A)₄, the (C₂A)₂ + (C₂A)₄ pair is distinguished because the red Ag₁₀⁶⁺ luminescence is ∼6× lower, relaxes ∼30% faster, and is quenched ∼2× faster with O₂. These differences suggest that a specific break in the phosphodiester backbone can regulate how a contiguous vs broken scaffold wraps and better protects its cluster adduct.

Block copolymer self-assembly to pattern gold nanodots for site-specific placement of DNA origami and attachment of nanomaterials

Directed placement of DNA origami could play a key role in future integrated nanoelectronic devices. Here we demonstrated the site-selective attachment of DNA origami on gold dots formed using a pattern transfer method through block copolymer self-assembly. First, a random copolymer brush layer is grafted on the Si surface and then poly (styrene-b-methylmethacrylate) block copolymer is spin-coated to give a hexagonal nanoarray after annealing. UV irradiation followed by acetic acid etching is used to remove the PMMA, creating cylindrical holes and then oxygen plasma etching removes the random copolymer layer inside those holes. Next, metal evaporation, followed by lift-off creates a gold dot array. We evaluated different ligand functionalization of Au dots, as well as DNA hybridization to attach DNA origami to the nanodots. DNA-coated Au nanorods are assembled on the DNA origami as a step towards creating nanowires and to facilitate electron microscopy characterization of the attachment of DNA origami on these Au nanodots. The DNA hybridization approach showed better DNA attachment to Au nanodots than localization by electrostatic interaction. This work contributes to the understanding of DNA-templated assembly, nanomaterials, and block copolymer nanolithography. Furthermore, the work shows potential for creating DNA-templated nanodevices and their placement in ordered arrays in future nanoelectronics.