Shear-Coated Linear Birefringent and Chiral Cellulose Nanocrystal Films Prepared from Non-Sonicated Suspensions with Different Storage Time

Structural Color from Cellulose Nanocrystals or Chitin Nanocrystals: Self-Assembly, Optics, and Applications

Widespread concerns over the impact of human activity on the environment have resulted in a desire to replace artificial functional materials with naturally derived alternatives. As such, polysaccharides are drawing increasing attention due to offering a renewable, biodegradable, and biocompatible feedstock for functional nanomaterials. In particular, nanocrystals of cellulose and chitin have emerged as versatile and sustainable building blocks for diverse applications, ranging from mechanical reinforcement to structural coloration. Much of this interest arises from the tendency of these colloidally stable nanoparticles to self-organize in water into a lyotropic cholesteric liquid crystal, which can be readily manipulated in terms of its periodicity, structure, and geometry. Importantly, this helicoidal ordering can be retained into the solid-state, offering an accessible route to complex nanostructured films, coatings, and particles. In this review, the process of forming iridescent, structurally colored films from suspensions of cellulose nanocrystals (CNCs) is summarized and the mechanisms underlying the chemical and physical phenomena at each stage in the process explored. Analogy is then drawn with chitin nanocrystals (ChNCs), allowing for key differences to be critically assessed and strategies toward structural coloration to be presented. Importantly, the progress toward translating this technology from academia to industry is summarized, with unresolved scientific and technical questions put forward as challenges to the community.

Improving the decorative performance of UV-curable coatings with iridescent cellulose nanocrystal film

Cellulose nanocrystals (CNC) possess remarkable mechanical properties, a high aspect ratio, a large specific surface area, and a unique nanostructure, making them a popular choice in various fields. In this study, a CNC suspension was prepared through acid hydrolysis, and subsequently, a film exhibiting iridescence and chiral nematic structure was formed on the cured UV-WA surface via evaporation-induced self-assembly. The mean diameter and length of CNC were determined to be 25.1-33.3 nm and 281.3-404.2 nm, respectively, through transmission electron microscope analysis. The experimental results revealed that the color of the film significantly changes with variations in the CNC suspension concentration. Notably, the formation of the iridescent film is dependent on the concentration of CNC, with concentrations between 1.2% and 2.9% being optimal, and the aspect ratio of the CNC nanoparticles being around 11.3. X-ray diffraction analysis confirmed that the CNC nanoparticles possess the same crystal structure as microcrystalline cellulose (cellulose I). Fourier transform infrared spectroscopy revealed that the C[double bond, length as m-dash]C bond present in the liquid UV-curable coating disappeared upon UV irradiation. The performance of the CNC iridescent film, with varying thickness, was evaluated using UV-vis spectroscopy. The thermogravimetric analysis results indicate that the addition of CNC enhances the membrane's thermal stability and heat resistance. The results indicate that as the thickness of the CNC iridescent film increases, the corresponding UV-vis spectra display a redshift. The UV-WA/CNC shows potential in the field of decoration and establishing a straightforward, cost-effective, and efficient method for producing photonic materials with structural colors.

Accelerating Cellulose Nanocrystal Assembly into Chiral Nanostructures

Cellulose nanocrystal (CNC) suspensions self-assembled into chiral nematic liquid crystals. This property has enabled the development of versatile optical materials with fascinating properties. Nevertheless, the scale-up production and commercial success of chiral nematic CNC superstructures face significant challenges. Fabrication of chiral nematic CNC nanostructures suffers from a ubiquitous pernicious trade-off between uniform chiral nematic structure and rapid self-assembly. Specifically, the chiral nematic assembly of CNCs is a time-consuming, spontaneous process that involves the organization of particles into ordered nanostructures as the solvent evaporates. This review is driven by the interest in accelerating chiral nematic CNC assembly and promoting a long-range oriented chiral nematic CNC superstructure. To start this review, the chirality origins of CNC and CNC aggregates are analyzed. This is followed by a summary of the recent advances in stimuli-accelerated chiral nematic CNC self-assembly procedures, including evaporation-induced self-assembly, continuous coating, vacuum-assisted self-assembly, and shear-induced CNC assembly under confinement. In particular, stimuli-induced unwinding, alignment, and relaxation of chiral nematic structures were highlighted, offering a significant link between the accelerated assembly approaches and uniform chiral nematic nanostructures. Ultimately, future opportunities and challenges for rapid chiral nematic CNC assembly are discussed for more innovative and exciting applications.

3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures

Architected materials with nano/microscale orders can provide superior mechanical properties; however, reproducing such levels of ordering in complex structures has remained challenging. Inspired by Bouligand structures in nature, here, 3D printing of complex geometries with guided long-order radially twisted chiral hierarchy, using cellulose nanocrystals (CNC)-based inks is presented. Detailed rheological measurements, in situ flow analysis, polarized optical microscopy (POM), and director field analysis are employed to evaluate the chiral assembly over the printing process. It is demonstrated that shear flow forces inside the 3D printer's nozzle orient individual CNC particles forming a pseudo-nematic phase that relaxes to uniformly aligned concentric chiral nematic structures after the flow cessation. Acrylamide, a photo-curable monomer, is incorporated to arrest the concentric chiral arrangements within the printed filaments. The time series POM snapshots show that adding the photo-curable monomer at the optimized concentrations does not interfere with chiral self-assemblies and instead increases the chiral relaxation rate. Due to the liquid-like nature of the as-printed inks, optimized Carbopol microgels are used to support printed filaments before photo-polymerization. By paving the path towards developing bio-inspired materials with nanoscale hierarchies in larger-scale printed constructs, this biomimetic approach expands 3D printing materials beyond what has been realized so far.

Applications of Mueller Matrix Polarimetry to Biological and Agricultural Diagnostics: A Review

The review contains a systematization of the main approaches to the practical implementation of Mueller matrix polarimetry and the prospects for its application in biology and agriculture. The most typical optical layouts for measuring the Mueller matrix of various objects, such as disperse systems, tissues and surface structures, are discussed. Mueller matrix measurements, being integrated into standard schemes of conventional optical methods, such as scatterometry, optical coherence tomography, fluorimetry, spectrophotometry and reflectometry, can significantly expand their capabilities in the characterization of biological systems and bioorganic materials. Additionally, microwave Mueller matrix polarimetry can be used for monitoring soil conditions and crop growth. The proposed systematization is aimed at outlining the conceptual directions for the development of non-invasive diagnostic tools based on measuring the Mueller matrix, primarily with a focus on biological research and agricultural practice.