New Aptamer/MoS2/Ni-Fe LDH Photoelectric Sensor for Bisphenol A Determination

An Overview of Aptamer-Based Sensor Platforms for the Detection of Bisphenol-A

Endocrine disruptive compounds are natural or anthropogenic environmental micropollutants that alter the function of the endocrine system ultimately damaging the metabolism. Bisphenol A (BPA) is the most common of these pollutants and it is often used in epoxy coatings and polycarbonates as a plasticizer. Therefore, monitoring BPA levels in different environments is very important and challenging. In recent years, an increasing number of BPA detection methods have been proposed. This article presents a critical review of aptamer-based electrochemical, fluorescence-based, colorimetric, and several other BPA detection platforms published in the last decade. Furthermore, a statistical evaluation has been made using principle component analysis showing analytical performance parameters do not create very different clusters. Comparisons to other BPA detection methods are also presented so that the reader has an overall literature overview.

High-performance, stable CoNi LDH@Ni foam composite membrane with innovative peroxymonosulfate activation for 2,4-dichlorophenol destruction

In this study, the cobalt-nickel layered double hydroxides (CoNi LDH) were synthesized with a variety of Co/Ni mass ratio, as CoxNiy LDHs. In comparison, Co1Ni3 LDH presented the best peroxymonosulfate (PMS) activation efficiency for 2,4-dichlorophenol removal. Meanwhile, CoNi LDH@Nickel foam (CoNi LDH@NF) composite membrane was constructed for enhancing the stability of catalytic performance. Herein, CoNi LDH@NF-PMS system exerted high degradation efficiency of 99.22% within 90 min for 2,4-DCP when [PMS]0 = 0.4 g/L, Co1Ni3 LDH@NF = 2 cm × 2 cm (0.2 g/L), reaction temperature = 298 K. For the surface morphology and structure of the catalyst, it was demonstrated that the CoNi LDH@NF composite membrane possessed abundant cavity structure, good specific surface area and sufficient active sites. Importantly, ·OH, SO4·- and 1O2 played the primary role in the CoNi LDH@NF-PMS system for 2,4-DCP decomposition, which revealed the PMS activation mechanism in CoNi LDH@NF-PMS system. Hence, this study eliminated the stability and adaptability of CoNi LDH@NF composite membrane, proposing a new theoretical basis of PMS heterogeneous catalysts selection.

Fabrication of NiFe-LDHs Modified Carbon Nanotubes as the High-Performance Sulfur Host for Lithium-Sulfur Batteries

Lithium-sulfur batteries offer the potential for significantly higher energy density and cost-effectiveness. However, their progress has been hindered by challenges such as the "shuttle effect" caused by lithium polysulfides and the volume expansion of sulfur during the lithiation process. These limitations have impeded the widespread adoption of lithium-sulfur batteries in various applications. It is urgent to explore the high-performance sulfur host to improve the electrochemical performance of the sulfur electrode. Herein, bimetallic NiFe hydroxide (NiFe-LDH)-modified carbon nanotubes (CNTs) are prepared as the sulfur host materials (NiFe-CNT@S) for loading of sulfur. On the one hand, the crosslinked CNTs can increase the electron conductivity of the sulfur host as well as disperse NiFe-LDHs nanosheets. On the other hand, NiFe-LDHs command the capability of strongly adsorbing lithium polysulfides and also accelerate their conversion, which effectively suppresses the shuttle effect problem in lithium polysulfides. Hence, the electrochemical properties of NiFe-CNT@S exhibit significant enhancements when compared with those of the sulfur-supported pure NiFe-LDHs (NiFe-LDH@S). The initial capacity of NiFe-CNT@S is reported to be 1010 mAh g-1. This value represents the maximum amount of charge that the material can store per gram when it is first synthesized or used in a battery. After undergoing 500 cycles at a rate of 2 C (1 C = 1675 mA g-1), the NiFe-CNT@S composite demonstrates a sustained capacity of 876 mAh g-1. Capacity retention is a measure of how well a battery or electrode material can maintain its capacity over repeated charge-discharge cycles, and a higher retention percentage indicates better durability and stability of the material.