Dosimetric Performance of Poly(vinyl alcohol)/Silver Nanoparticles Hybrid Nanomaterials for Colorimetric Sensing of Gamma Radiation

Silver nanocluster-based ratiometric fluorescence sensors for X-ray dose detection

In this paper, we synthesized silver nanoclusters using bovine serum albumin (BSA) as a template (BSA@AgNCs). Then, we anchored hydroxyphenyl fluorescein (HPF) to yield HPF-BSA@AgNCs. When exposed to X-rays, hydroxyl (∙OH) radicals generated by radiolysis of water react with HPF to produce fluorescein, which emits enhanced fluorescence at 515 nm (λex = 480 nm). The fluorescence intensity of BSA@AgNCs at 685 nm (λex = 480 nm) remains stable when exposed to X-rays. This HPF-BSA@AgNCs ratiometric fluorescence sensor can rapidly detect 0.1-20 Gy (the energy deposited per unit mass, J/kg) of X-rays. In addition, HPF-BSA@AgNCs exhibit good durability and temperature stability. Finally, HPF-BSA@AgNCs were used to measure the absorbed doses of A549 cells and evaluate the cell irradiation damage.

Post-Irradiation Behavior of Colored PVA-Based Films Containing Ag Nanoparticles as Radiation Detectors/Exposure Indicators

Ionizing radiation covers a broad spectrum of applications. Since radioactive/radiation pollution is directly related to radiation risk, radiation levels should be strictly controlled. Different detection methods can be applied for radiation registration and monitoring. In this paper, radiation-induced variations in the optical properties of silver-enriched PVA-based hydrogel films with and without azo dye (Toluidine blue O, TBO, and Methyl red, MR) additives were investigated, and the feasibility of these free-standing films to serve as radiation detectors/exposure indicators was assessed. AgNO3 admixed with PVA gel was used as a source for the radiation-induced synthesis of silver nanoparticles (AgNPs) in irradiated gel films. Three types of sensors were prepared: silver-enriched PVA films containing a small amount of glycerol (AgPVAGly); silver-enriched PVA films with toluidine blue adducts (AgPVAGlyTBO); and silver-enriched PVA films with methyl red additives (AgPVAGlyMR). The selection of TBO and MR was based on their sensitivity to irradiation. The irradiation of the samples was performed in TrueBeam2.1 (VARIAN) using 6 MeV photons. Different doses up to 10 Gy were delivered to the films. The sensitivity of the films was assessed by analyzing the characteristic UV-Vis absorbance peaks on the same day as irradiation and 7, 30, 45, 90, and 180 days after irradiation. It was found that the addition of azo dyes led to an enhanced radiation sensitivity of the AgNPs containing films (0.6 Gy-1 for AgPVAGlyTBO and 0.4 Gy-1 for AgPVAGlyMR) irradiated with <2 Gy doses, indicating their applicability as low-dose exposure indicators. The irradiated films were less sensitive to higher doses. Almost no dose fading was detected between the 7th and 45th day after irradiation. Based on the obtained results, competing AgNP formation and color-bleaching effects in the AgPVAGly films with dye additives are discussed.