Adsorption Behaviors of Cationic Methylene Blue and Anionic Reactive Blue 19 Dyes onto Nano-Carbon Adsorbent Carbonized from Small Precursors

Organically modified montmorillonite composited with magnetic glyoxal-chitosan Schiff base for reactive blue 19 dye removal: Process optimization and adsorptive mechanism

In this study, a new biocomposite magnetic adsorbent (magnetic glyoxal-chitosan Schiff base/organically modified montmorillonite (MCTS-GOX/OMMT)) was synthesized and employed for the adsorption of reactive blue 19 dye (RB19) from aqueous environment. The physicochemical properties of the MCTS-GOX/OMMT were confirmed by using various characterization techniques such as BET, XRD, FTIR, SEM-EDX, VSM, and pHpzc. The adsorption key variables were statistically optimized via Box-Behnken design (BBD) And accordingly the best operational conditions to achieve maximum RB19 removal were recorded at MCTS-GOX/OMMT dosage = 0.1 g/0.1 L, solution pH = 4, and working temperature = 25 °C. The adsorption process for RB19 appeared to follow the pseudo-second-order kinetic and the Langmuir isotherm models, according to the findings of the adsorption kinetics and equilibrium investigations. The maximum adsorption capacity of the MCTS-GOX/OMMT towards RB19 was 122.3 mg/g, demonstrating its preferable adsorption capability. The successful development of this novel magnetic bioadsorbent with excellent adsorption ability towards organic dyes and efficient separation ability opens possibilities for its practical application in wastewater treatment and dye removal processes.

Use of Euphorbia balsamifera Extract in Precursor Fabrication of Silver Nanoparticles for Efficient Removal of Bromocresol Green and Bromophenol Blue Toxic Dyes

Silver nanoparticles (Ag-NPs) are attracting great attention for their use in various applications, along with methods for their green and facile production. In this study, we present a new eco-friendly approach based on the use of Euphorbia balsamifera extract (EBE) in the green synthesis of silver nanoparticles (Ag-NPs), which are then applied as a reducing and stabilizing agent for the efficient removal of water-based reactive dyes such as bromocresol green (BCG) and bromophenol blue (BPB). The as-prepared Ag-NPs are quasi-spherical in shape, with an average diameter of 20-34 nm. Diverse characterization methods, including X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) analysis, were used to analyze these Ag-NPs. The results reveal that water-soluble biomolecules in the Euphorbia balsamifera extract play an important role in the formation of the Ag-NPs. The removal of toxic dyes was studied under varied operational parameters such as Ag-NP dosage, initial dye concentration, pH, stirring time, and temperature. Under the optimum investigated conditions, nearly 99.12% and 97.25% of the bromocresol green and bromophenol blue dyes, respectively, were removed. Both BCG and BPB adsorption were found to adhere to pseudo-second-order kinetics (r₂² = 1 and 0.995) and fit the Langmuir isotherm models well (R₁² = 0.998 and 0.994), with maximal monolayer adsorption capacities of 20.40 and 41.03 mg/g, respectively. Their adsorption processes were observed to be intrinsically endothermic. The results confirm the potential of the Euphorbia balsamifera extract as a low-cost, nontoxic, and eco-friendly natural resource for the synthesis of Ag-NPs that may be useful in the remediation of hazardous dye-contaminated water sources.

Construction and Adsorption Performance Study of GO-CNT/Activated Carbon Composites for High Efficient Adsorption of Pollutants in Wastewater

Based on the increasing application requirements for the efficient adsorption of wastewater pollutants, graphene oxide-carbon nanotube/activated carbon (GO-CNT/AC) composites are constructed from the optimal microstructure matching of GO, CNTs, and AC materials by solution impregnation and freeze-drying methods. Three-dimensional structures with nano-micro hierarchical pores are established, with GO and CNTs uniformly dispersed on the AC surface, effectively restrain the agglomeration. The added CNTs played a "spring" role, supporting the gap between the GO sheets and AC matrix. Meanwhile, stable links are formed between GO, CNTs, and AC, realizing the synergistic matching of the microstructure, which provides abundant active absorption sites beneficial for improving the adsorption performance. The influences of the CNT contents, adsorbent amounts, methylene blue (MB) concentrations, and pH values on the adsorption property of GO-CNT/AC composites are systematically investigated. The results show that when the pH value of the MB solution is 13, the CNT concentration is 3 mg/mL and the MB concentration is 200 mg/L, the adsorption property of the composite is the best, with an adsorption capacity of 190.8 mg/g and a removal percentage of 95.4%. Compared with the raw AC, the adsorption capacity and removal percentage of the composites are increased by 73.9% and 72.8%, respectively. The GO-CNT/AC composites exhibit excellent cyclic adsorption performance, with a cyclic stability of 91.8% after six rounds of adsorption-desorption cycles. The kinetic analysis shows that the adsorption process conforms to the PSO kinetic model. By fitting of the IPD model, the adsorption mechanisms of the GO-CNT/AC composites are divided into two adsorption stages and described respectively. This study provides a new way to achieve highly efficient adsorption of pollutants in wastewater.

Activated carbon derived from sugarcane and modified with natural zeolite for efficient adsorption of methylene blue dye: experimentally and theoretically approaches

The introduction of activated carbon/natural zeolite (AC/NZ) as an efficient and reliable nanoadsorbent for enhancing methylene blue (MB) dye adsorption. By calcining sugarcane waste at various temperatures between 500 and 900 °C, activated carbons (ACs) are formed. Both XRD and SEM were used for the characterization of the prepared adsorbents. Adsorption measurements for the removal of MB dye were made on the impact of pH, beginning MB concentration, and contact time. The maximum AC500/NZ adsorption capacity for MB dye at 25 °C, pH 7, and an AC500/NZ mass of 50 mg was found to be approximately 51 mg/g at an initial concentration of 30 ppm. The pseudo-second-order kinetics model and the Temkin isotherm model describe the adsorption process. The Temkin model shows that the adsorption energy is 1.0 kcal/mol, indicating that the MB-to-AC500/NZ adsorption process occurs physically. Our Monte Carlo (MC) simulation studies supported our findings and showed that the Van der Waals dispersion force was responsible for the MB molecule's physical adsorption. The AC500/NZ adsorbent is thought to be a strong contender for water remediation.

Effective Removal of Methylene Blue on EuVO4/g-C3N4 Mesoporous Nanosheets via Coupling Adsorption and Photocatalysis

In this study, we first manufactured ultrathin g-C₃N₄ (CN) nanosheets by thermal etching and ultrasonic techniques. Then, EuVO₄ (EV) nanoparticles were loaded onto CN nanosheets to form EuVO₄/g-C₃N₄ heterojunctions (EVCs). The ultrathin and porous structure of the EVCs increased the specific surface area and reaction active sites. The formation of the heterostructure extended visible light absorption and accelerated the separation of charge carriers. These two factors were advantageous to promote the synergistic effect of adsorption and photocatalysis, and ultimately enhanced the adsorption capability and photocatalytic removal efficiency of methylene blue (MB). EVC-2 (2 wt% of EV) exhibited the highest adsorption and photocatalytic performance. Almost 100% of MB was eliminated via the adsorption–photocatalysis synergistic process over EVC-2. The MB adsorption capability of EVC-2 was 6.2 times that of CN, and the zero-orderreaction rate constant was 5 times that of CN. The MB adsorption on EVC-2 followed the pseudo second-order kinetics model and the adsorption isotherm data complied with the Langmuir isotherm model. The photocatalytic degradation data of MB on EVC-2 obeyed the zero-order kinetics equation in 0–10 min and abided by the first-order kinetics equation for10–30 min. This study provided a promising EVC heterojunctions with superior synergetic effect of adsorption and photocatalysis for the potential application in wastewater treatment.